= Transforming and Indexing Custom JSON
:page-shortname: transforming-and-indexing-custom-json
:page-permalink: transforming-and-indexing-custom-json.html
// Licensed to the Apache Software Foundation (ASF) under one
// or more contributor license agreements.  See the NOTICE file
// distributed with this work for additional information
// regarding copyright ownership.  The ASF licenses this file
// to you under the Apache License, Version 2.0 (the
// "License"); you may not use this file except in compliance
// with the License.  You may obtain a copy of the License at
//
//   http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing,
// software distributed under the License is distributed on an
// "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
// KIND, either express or implied.  See the License for the
// specific language governing permissions and limitations
// under the License.

If you have JSON documents that you would like to index without transforming them into Solr's structure, you can add them to Solr by including some parameters with the update request. These parameters provide information on how to split a single JSON file into multiple Solr documents and how to map fields to Solr's schema. One or more valid JSON documents can be sent to the `/update/json/docs` path with the configuration params.

[[TransformingandIndexingCustomJSON-MappingParameters]]
== Mapping Parameters

These parameters allow you to define how a JSON file should be read for multiple Solr documents.

* **split**: Defines the path at which to split the input JSON into multiple Solr documents and is required if you have multiple documents in a single JSON file. If the entire JSON makes a single solr document, the path must be “`/`”. It is possible to pass multiple split paths by separating them with a pipe `(|)` example : `split=/|/foo|/foo/bar` . If one path is a child of another, they automatically become a child document **f**: This is a multivalued mapping parameter. The format of the parameter is` target-field-name:json-path`. The `json-path` is required. The `target-field-name` is the Solr document field name, and is optional. If not specified, it is automatically derived from the input JSON.The default target field name is the fully qualified name of the field. Wildcards can be used here, see the <<TransformingandIndexingCustomJSON-Wildcards,Wildcards>> below for more information.
* *mapUniqueKeyOnly* (boolean): This parameter is particularly convenient when the fields in the input JSON are not available in the schema and <<schemaless-mode.adoc#schemaless-mode,schemaless mode>> is not enabled. This will index all the fields into the default search field (using the `df` parameter, below) and only the `uniqueKey` field is mapped to the corresponding field in the schema. If the input JSON does not have a value for the `uniqueKey` field then a UUID is generated for the same.
* **df**: If the `mapUniqueKeyOnly` flag is used, the update handler needs a field where the data should be indexed to. This is the same field that other handlers use as a default search field.
* **srcField**: This is the name of the field to which the JSON source will be stored into. This can only be used if `split=/` (i.e., you want your JSON input file to be indexed as a single Solr document). Note that atomic updates will cause the field to be out-of-sync with the document.
* **echo**: This is for debugging purpose only. Set it to true if you want the docs to be returned as a response. Nothing will be indexed.

For example, if we have a JSON file that includes two documents, we could define an update request like this:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs'\
'?split=/exams'\
'&f=first:/first'\
'&f=last:/last'\
'&f=grade:/grade'\
'&f=subject:/exams/subject'\
'&f=test:/exams/test'\
'&f=marks:/exams/marks'\
 -H 'Content-type:application/json' -d '
{
  "first": "John",
  "last": "Doe",
  "grade": 8,
  "exams": [
    {
      "subject": "Maths",
      "test"   : "term1",
      "marks"  : 90},
    {
      "subject": "Biology",
      "test"   : "term1",
      "marks"  : 86}
  ]
}'
----

You can store and reuse the params by using <<request-parameters-api.adoc#request-parameters-api,Request Parameters>>.

[source,bash]
----
 curl http://localhost:8983/solr/my_collection/config/params -H 'Content-type:application/json' -d '{
 "set": {
 "my_params": {
 "split": "/exams",
 "f": ["first:/first","last:/last","grade:/grade","subject:/exams/subject","test:/exams/test"]
 }}}'
----

and use it as follows:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs?useParams=my_params' -H 'Content-type:application/json' -d '{
"first": "John",
"last": "Doe",
"grade": 8,
"exams": [
{
"subject": "Maths",
"test" : "term1",
"marks" : 90},
{
"subject": "Biology",
"test" : "term1",
"marks" : 86}
]
}'
----

With this request, we have defined that "exams" contains multiple documents. In addition, we have mapped several fields from the input document to Solr fields.

When the update request is complete, the following two documents will be added to the index:

[source,json]
----
{
  "first":"John",
  "last":"Doe",
  "marks":90,
  "test":"term1",
  "subject":"Maths",
  "grade":8
}
{
  "first":"John",
  "last":"Doe",
  "marks":86,
  "test":"term1",
  "subject":"Biology",
  "grade":8
}
----

In the prior example, all of the fields we wanted to use in Solr had the same names as they did in the input JSON. When that is the case, we can simplify the request as follows:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs'\
'?split=/exams'\
'&f=/first'\
'&f=/last'\
'&f=/grade'\
'&f=/exams/subject'\
'&f=/exams/test'\
'&f=/exams/marks'\
 -H 'Content-type:application/json' -d '
{
  "first": "John",
  "last": "Doe",
  "grade": 8,
  "exams": [
    {
      "subject": "Maths",
      "test"   : "term1",
      "marks"  : 90},
    {
      "subject": "Biology",
      "test"   : "term1",
      "marks"  : 86}
  ]
}'
----

In this example, we simply named the field paths (such as `/exams/test`). Solr will automatically attempt to add the content of the field from the JSON input to the index in a field with the same name.

[TIP]
====

If you are working in <<schemaless-mode.adoc#schemaless-mode,Schemaless Mode>>, fields that don't exist will be created on the fly with Solr's best guess for the field type. Documents WILL get rejected if the fields do not exist in the schema before indexing. So, if you are NOT using schemaless mode, pre-create those fields.

====

[[TransformingandIndexingCustomJSON-Wildcards]]
== Wildcards

Instead of specifying all the field names explicitly, it is possible to specify wildcards to map fields automatically. There are two restrictions: wildcards can only be used at the end of the `json-path`, and the split path cannot use wildcards. A single asterisk `\*` maps only to direct children, and a double asterisk `\*\*` maps recursively to all descendants. The following are example wildcard path mappings:

* `f=$FQN:/**`: maps all fields to the fully qualified name (`$FQN`) of the JSON field. The fully qualified name is obtained by concatenating all the keys in the hierarchy with a period (`.`) as a delimiter. This is the default behavior if no `f` path mappings are specified.
* `f=/docs/*`: maps all the fields under docs and in the name as given in json
* `f=/docs/**`: maps all the fields under docs and its children in the name as given in json
* `f=searchField:/docs/*` : maps all fields under /docs to a single field called ‘searchField’
* `f=searchField:/docs/**` : maps all fields under /docs and its children to searchField

With wildcards we can further simplify our previous example as follows:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs'\
'?split=/exams'\
'&f=/**'\
 -H 'Content-type:application/json' -d '
{
  "first": "John",
  "last": "Doe",
  "grade": 8,
  "exams": [
    {
      "subject": "Maths",
      "test"   : "term1",
      "marks"  : 90},
    {
      "subject": "Biology",
      "test"   : "term1",
      "marks"  : 86}
  ]
}'
----

Because we want the fields to be indexed with the field names as they are found in the JSON input, the double wildcard in `f=/**` will map all fields and their descendants to the same fields in Solr.

It is also possible to send all the values to a single field and do a full text search on that. This is a good option to blindly index and query JSON documents without worrying about fields and schema.

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs'\
'?split=/'\
'&f=txt:/**'\
 -H 'Content-type:application/json' -d '
{
  "first": "John",
  "last": "Doe",
  "grade": 8,
  "exams": [
    {
      "subject": "Maths",
      "test"   : "term1",
      "marks"  : 90},
    {
      "subject": "Biology",
      "test"   : "term1",
      "marks"  : 86}
  ]
}' 
----

In the above example, we've said all of the fields should be added to a field in Solr named 'txt'. This will add multiple fields to a single field, so whatever field you choose should be multi-valued.

The default behavior is to use the fully qualified name (FQN) of the node. So, if we don't define any field mappings, like this:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs?split=/exams'\
    -H 'Content-type:application/json' -d '
{
  "first": "John",
  "last": "Doe",
  "grade": 8,
  "exams": [
    {
      "subject": "Maths",
      "test"   : "term1",
      "marks"  : 90},
    {
      "subject": "Biology",
      "test"   : "term1",
      "marks"  : 86}
  ]
}'
----

The indexed documents would be added to the index with fields that look like this:

[source,bash]
----
{
  "first":"John",
  "last":"Doe",
  "grade":8,
  "exams.subject":"Maths",
  "exams.test":"term1",
  "exams.marks":90},
{
  "first":"John",
  "last":"Doe",
  "grade":8,
  "exams.subject":"Biology",
  "exams.test":"term1",
  "exams.marks":86}
----

[[TransformingandIndexingCustomJSON-MultipledocumentsinaSinglePayload]]
== Multiple documents in a Single Payload

This functionality supports documents in the http://jsonlines.org/[JSON Lines] format (`.jsonl`), which specifies one document per line.

For example:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs' -H 'Content-type:application/json' -d '
{ "first":"Steve", "last":"Jobs", "grade":1, "subject": "Social Science", "test" : "term1", "marks" : 90}
{ "first":"Steve", "last":"Woz", "grade":1, "subject": "Political Science", "test" : "term1", "marks" : 86}'
----

Or even an array of documents, as in this example:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs' -H 'Content-type:application/json' -d '[
{ "first":"Steve", "last":"Jobs", "grade":1, "subject": "Computer Science", "test"   : "term1", "marks"  : 90},
{ "first":"Steve", "last":"Woz", "grade":1, "subject": "Calculus", "test"   : "term1", "marks"  : 86}]'
----

[[TransformingandIndexingCustomJSON-IndexingNestedDocuments]]
== Indexing Nested Documents

The following is an example of indexing nested documents:

[source,bash]
----
curl 'http://localhost:8983/solr/my_collection/update/json/docs?split=/|/orgs'\
    -H 'Content-type:application/json' -d '{
  "name": "Joe Smith",
  "phone": 876876687,
  "orgs": [
    {
      "name": "Microsoft",
      "city": "Seattle",
      "zip": 98052
    },
    {
      "name": "Apple",
      "city": "Cupertino",
      "zip": 95014
    }
  ]
}'
----

With this example, the documents indexed would be, as follows:

[source,json]
----
{
  "name":"Joe Smith",
  "phone":876876687,
  "_childDocuments_":[
    {
      "name":"Microsoft",
      "city":"Seattle",
      "zip":98052},
    {
      "name":"Apple",
      "city":"Cupertino",
      "zip":95014}]}
----

[[TransformingandIndexingCustomJSON-TipsforCustomJSONIndexing]]
== Tips for Custom JSON Indexing

1.  Schemaless mode: This handles field creation automatically. The field guessing may not be exactly as you expect, but it works. The best thing to do is to setup a local server in schemaless mode, index a few sample docs and create those fields in your real setup with proper field types before indexing
2.  Pre-created Schema : Post your docs to the `/update/`json`/docs` endpoint with `echo=true`. This gives you the list of field names you need to create. Create the fields before you actually index
3.  No schema, only full-text search : All you need to do is to do full-text search on your JSON. Set the configuration as given in the Setting JSON Defaults section.

[[TransformingandIndexingCustomJSON-SettingJSONDefaults]]
== Setting JSON Defaults

It is possible to send any json to the `/update/json/docs` endpoint and the default configuration of the component is as follows:

[source,xml]
----
<initParams path="/update/json/docs">
  <lst name="defaults">
    <!-- this ensures that the entire json doc will be stored verbatim into one field -->
    <str name="srcField">_src_</str>
    <!-- This means a the uniqueKeyField will be extracted from the fields and
         all fields go into the 'df' field. In this config df is already configured to be 'text'
     -->
    <str name="mapUniqueKeyOnly">true</str>
    <!-- The default search field where all the values are indexed to -->
    <str name="df">text</str>
  </lst>
</initParams>
----

So, if no params are passed, the entire json file would get indexed to the `\_src_` field and all the values in the input JSON would go to a field named `text`. If there is a value for the uniqueKey it is stored and if no value could be obtained from the input JSON, a UUID is created and used as the uniqueKey field value.

Alternately, use the Request Parameters feature to set these params

[source,bash]
----
 curl http://localhost:8983/solr/my_collection/config/params -H 'Content-type:application/json' -d '{
 "set": {
 "full_txt": {
     "srcField": "_src_",
     "mapUniqueKeyOnly" : true,
     "df": "text"
 }}}'
----

Send the parameter `useParams=full_txt` with each request.
