Lucene Change Log $Id$ ======================= Trunk (not yet released) ======================= Changes in backwards compatibility policy * LUCENE-1979: Change return type of SnapshotDeletionPolicy#snapshot() from IndexCommitPoint to IndexCommit. Code that uses this method needs to be recompiled against Lucene 3.0 in order to work. The previously deprecated IndexCommitPoint is also removed. (Michael Busch) * oal.Lock.isLocked is now allowed to throw an IOException * LUCENE-2030: CachingWrapperFilter and CachingSpanFilter now hide the internal cache implementation for thread safety, before it was declared protected. (Peter Lenahan, Uwe Schindler, Simon Willnauer) * LUCENE-2053: If you call Thread.interrupt() on a thread inside Lucene, Lucene will do its best to interrupt the thread. However, instead of throwing InterruptedException (which is a checked exception), you'll get an oal.util.ThreadInterruptedException (an unchecked exception, subclassing RuntimeException). The interrupt status on the thread is cleared when this exception is thrown. (Mike McCandless) Changes in runtime behavior * LUCENE-1677: Remove the system property to set SegmentReader class implementation. (Uwe Schindler) * LUCENE-1960: As a consequence of the removal of Field.Store.COMPRESS, support for this type of fields was removed. Lucene 3.0 is still able to read indexes with compressed fields, but as soon as merges occur or the index is optimized, all compressed fields are decompressed and converted to Field.Store.YES. Because of this, indexes with compressed fields can suddenly get larger. Also the first merge with decompression cannot be done in raw mode, it is therefore slower. This change has no effect for code that uses such old indexes, they behave as before (fields are automatically decompressed during read). Indexes converted to Lucene 3.0 format cannot be read anymore with previous versions. It is recommended to optimize your indexes after upgrading to convert to the new format and decompress all fields. If you want compressed fields, you can use CompressionTools, that creates compressed byte[] to be added as binary stored field. This cannot be done automatically, as you also have to decompress such fields when reading. You have to reindex to do that. (Michael Busch, Uwe Schindler) * LUCENE-2060: Chagned ConcurrentMergeScheduler's default for maxNumThreads from 3 to 1, because in practice we get the most gains from running a single merge in the backround. More than one concurrent merge causes alot of thrashing (though it's possible on SSD storage that there would be net gains). (Jason Rutherglen, Mike McCandless) API Changes * LUCENE-1257, LUCENE-1984, LUCENE-1985, LUCENE-2057,...: Port to Java 1.5 [not yet finished]. (Uwe Schindler, Robert Muir, Karl Wettin, Paul Elschot, Kay Kay, Shai Erera) * LUCENE-1944: Remove (all) deprecated methods/constructors taking String/File directory pathes in IndexReader / IndexWriter and others. Also make FSDirectory abstract. (Uwe Schindler) * LUCENE-1925: Make IndexSearcher's subReaders and docStarts members protected; add expert ctor to directly specify reader, subReaders and docStarts. (John Wang, Tim Smith via Mike McCandless) * LUCENE-1855: Convert TokenStream/AttributeSource API to Generics. Now addAttribute()/getAttribute() return an instance of the requested attribute interface and no cast needed anymore. (Uwe Schindler, Michael Busch, Robert Muir, Adriano Crestani) * LUCENE-1857: Convert NumericRangeQuery API to Generics. NumericRangeQuery and NumericRangeFilter now have Integer, Long, Float, Double as type param. (Uwe Schindler) * LUCENE-1856: Remove Hits and all references from core and contrib. (Michael Busch) * LUCENE-1957: Remove Filter.bits(IndexReader) method and make Filter.getDocIdSet(IndexReader) abstract. (Michael Busch) * LUCENE-1960: Remove deprecated Field.Store.COMPRESS. (Michael Busch) * LUCENE-1961: Remove remaining deprecations from document package. (Michael Busch) * LUCENE-1968: Remove deprecated methods in PriorityQueue. (Michael Busch) * LUCENE-1970: Remove deprecated methods in DocIdSetIterator and make new ones abstract. (Michael Busch) * LUCENE-1946: Remove deprecated old TokenStream API. (Uwe Schindler) * LUCENE-1753: Make not yet final TokenStreams final to enforce decorator pattern. (Uwe Schindler) * LUCENE-1971: Remove deprecated RangeQuery, RangeFilter and ConstantScoreRangeQuery. (Uwe Schindler) * LUCENE-1975: Remove deprecated SpanQuery.getTerms() and generify Query.extractTerms(Set) (Michael Busch) * LUCENE-1972, LUCENE-1978: Remove deprecated ExtendedFieldCache, custom and auto caches, SortField.AUTO, deprecated custom sort, deprecated HitCollector, legacy search setting in SortField. Make new Sort(SortField...) and Sort.setSort(SortField...) varargs- enabled. (Uwe Schindler) * LUCENE-1977: Remove deprecated Term field and accessors in MultiTermQuery. (Uwe Schindler) * LUCENE-944: Remove deprecated methods in BooleanQuery. (Michael Busch) * LUCENE-1979: Remove remaining deprecations from indexer package. (Uwe Schindler, Michael Busch) * LUCENE-1989: Generify CharArraySet. (Uwe Schindler) * LUCENE-1945: All public classes that have a close() method now also implement java.io.Closeable (IndexReader, IndexWriter, Directory,...). (Uwe Schindler) * LUCENE-1998: Change all Parameter instances to Java 5 enums. This is no backwards-break, only a change of the super class. Parameter was deprecated and will be removed in a later version. (DM Smith, Uwe Schindler) * LUCENE-1973: Remove deprecated Similarity methods. Remove deprecated BoostingTermQuery and MultiValueSource. (Uwe Schindler) * LUCENE-2011: Remove deprecated Scorer.explain(int). (Uwe Schindler, Mark Miller) Bug fixes * LUCENE-1951: When the text provided to WildcardQuery has no wildcard characters (ie matches a single term), don't lose the boost and rewrite method settings. Also, rewrite to PrefixQuery if the wildcard is form "foo*", for slightly faster performance. (Robert Muir via Mike McCandless) * LUCENE-2013: SpanRegexQuery does not work with QueryScorer. (Benjamin Keil via Mark Miller) New features * LUCENE-1933: Provide a convenience AttributeFactory that creates a Token instance for all basic attributes. (Uwe Schindler) * LUCENE-2041: Parallelize the rest of ParallelMultiSearcher. Lot's of code refactoring and Java 5 concurrent support in MultiSearcher. (Joey Surls, Simon Willnauer via Uwe Schindler) Optimizations * LUCENE-1183: Optimize Levenshtein Distance computation in FuzzyQuery. (Cédrik Lime via Mike McCandless) * LUCENE-2006: Optimization of FieldDocSortedHitQueue to always use Comparable interface. (Uwe Schindler, Mark Miller) Build * LUCENE-486: Remove test->demo dependencies. (Michael Busch) Build * LUCENE-2024: Raise build requirements to Java 1.5 and ANT 1.7.0 (Uwe Schindler, Mike McCandless) ======================= Release 2.9.1 2009-11-06 ======================= Changes in backwards compatibility policy * LUCENE-2002: Add required Version matchVersion argument when constructing QueryParser or MultiFieldQueryParser and, default (as of 2.9) enablePositionIncrements to true to match StandardAnalyzer's 2.9 default (Uwe Schindler, Mike McCandless) Bug fixes * LUCENE-1974: Fixed nasty bug in BooleanQuery (when it used BooleanScorer for scoring), whereby some matching documents fail to be collected. (Fulin Tang via Mike McCandless) * LUCENE-1124: Make sure FuzzyQuery always matches the precise term. (stefatwork@gmail.com via Mike McCandless) * LUCENE-1976: Fix IndexReader.isCurrent() to return the right thing when the reader is a near real-time reader. (Jake Mannix via Mike McCandless) * LUCENE-1986: Fix NPE when scoring PayloadNearQuery (Peter Keegan, Mark Miller via Mike McCandless) * LUCENE-1992: Fix thread hazard if a merge is committing just as an exception occurs during sync (Uwe Schindler, Mike McCandless) * LUCENE-1995: Note in javadocs that IndexWriter.setRAMBufferSizeMB cannot exceed 2048 MB, and throw IllegalArgumentException if it does. (Aaron McKee, Yonik Seeley, Mike McCandless) * LUCENE-2004: Fix Constants.LUCENE_MAIN_VERSION to not be inlined by client code. (Uwe Schindler) * LUCENE-2016: Replace illegal U+FFFF character with the replacement char (U+FFFD) during indexing, to prevent silent index corruption. (Peter Keegan, Mike McCandless) * LUCENE-2045: Fix silly FileNotFoundException hit if you enable infoStream on IndexWriter and then add an empty document and commit (Shai Erera via Mike McCandless) * LUCENE-2046: IndexReader should not see the index as changed, after IndexWriter.prepareCommit has been called but before IndexWriter.commit is called. (Peter Keegan via Mike McCandless) API Changes * Un-deprecate search(Weight weight, Filter filter, int n) from Searchable interface (deprecated by accident). (Uwe Schindler) * Un-deprecate o.a.l.util.Version constants. (Mike McCandless) * LUCENE-1987: Un-deprecate some ctors of Token, as they will not be removed in 3.0 and are still useful. Also add some missing o.a.l.util.Version constants for enabling invalid acronym settings in StandardAnalyzer to be compatible with the coming Lucene 3.0. (Uwe Schindler) * LUCENE-1973: Un-deprecate IndexSearcher.setDefaultFieldSortScoring, to allow controlling per-IndexSearcher whether scores are computed when sorting by field. (Uwe Schindler, Mike McCandless) * LUCENE-2043: Make IndexReader.commit(Map) public. (Mike McCandless) Documentation * LUCENE-1955: Fix Hits deprecation notice to point users in right direction. (Mike McCandless, Mark Miller) * Fix javadoc about score tracking done by search methods in Searcher and IndexSearcher. (Mike McCandless) * LUCENE-2008: Javadoc improvements for TokenStream/Tokenizer/Token (Luke Nezda via Mike McCandless) ======================= Release 2.9.0 2009-09-23 ======================= Changes in backwards compatibility policy * LUCENE-1575: Searchable.search(Weight, Filter, int, Sort) no longer computes a document score for each hit by default. If document score tracking is still needed, you can call IndexSearcher.setDefaultFieldSortScoring(true, true) to enable both per-hit and maxScore tracking; however, this is deprecated and will be removed in 3.0. Alternatively, use Searchable.search(Weight, Filter, Collector) and pass in a TopFieldCollector instance, using the following code sample: TopFieldCollector tfc = TopFieldCollector.create(sort, numHits, fillFields, true /* trackDocScores */, true /* trackMaxScore */, false /* docsInOrder */); searcher.search(query, tfc); TopDocs results = tfc.topDocs(); Note that your Sort object cannot use SortField.AUTO when you directly instantiate TopFieldCollector. Also, the method search(Weight, Filter, Collector) was added to the Searchable interface and the Searcher abstract class to replace the deprecated HitCollector versions. If you either implement Searchable or extend Searcher, you should change your code to implement this method. If you already extend IndexSearcher, no further changes are needed to use Collector. Finally, the values Float.NaN, Float.NEGATIVE_INFINITY and Float.POSITIVE_INFINITY are not valid scores. Lucene uses these values internally in certain places, so if you have hits with such scores, it will cause problems. (Shai Erera via Mike McCandless) * LUCENE-1687: All methods and parsers from the interface ExtendedFieldCache have been moved into FieldCache. ExtendedFieldCache is now deprecated and contains only a few declarations for binary backwards compatibility. ExtendedFieldCache will be removed in version 3.0. Users of FieldCache and ExtendedFieldCache will be able to plug in Lucene 2.9 without recompilation. The auto cache (FieldCache.getAuto) is now deprecated. Due to the merge of ExtendedFieldCache and FieldCache, FieldCache can now additionally return long[] and double[] arrays in addition to int[] and float[] and StringIndex. The interface changes are only notable for users implementing the interfaces, which was unlikely done, because there is no possibility to change Lucene's FieldCache implementation. (Grant Ingersoll, Uwe Schindler) * LUCENE-1630, LUCENE-1771: Weight, previously an interface, is now an abstract class. Some of the method signatures have changed, but it should be fairly easy to see what adjustments must be made to existing code to sync up with the new API. You can find more detail in the API Changes section. Going forward Searchable will be kept for convenience only and may be changed between minor releases without any deprecation process. It is not recommended that you implement it, but rather extend Searcher. (Shai Erera, Chris Hostetter, Martin Ruckli, Mark Miller via Mike McCandless) * LUCENE-1422, LUCENE-1693: The new Attribute based TokenStream API (see below) has some backwards breaks in rare cases. We did our best to make the transition as easy as possible and you are not likely to run into any problems. If your tokenizers still implement next(Token) or next(), the calls are automatically wrapped. The indexer and query parser use the new API (eg use incrementToken() calls). All core TokenStreams are implemented using the new API. You can mix old and new API style TokenFilters/TokenStream. Problems only occur when you have done the following: You have overridden next(Token) or next() in one of the non-abstract core TokenStreams/-Filters. These classes should normally be final, but some of them are not. In this case, next(Token)/next() would never be called. To fail early with a hard compile/runtime error, the next(Token)/next() methods in these TokenStreams/-Filters were made final in this release. (Michael Busch, Uwe Schindler) * LUCENE-1763: MergePolicy now requires an IndexWriter instance to be passed upon instantiation. As a result, IndexWriter was removed as a method argument from all MergePolicy methods. (Shai Erera via Mike McCandless) * LUCENE-1748: LUCENE-1001 introduced PayloadSpans, but this was a back compat break and caused custom SpanQuery implementations to fail at runtime in a variety of ways. This issue attempts to remedy things by causing a compile time break on custom SpanQuery implementations and removing the PayloadSpans class, with its functionality now moved to Spans. To help in alleviating future back compat pain, Spans has been changed from an interface to an abstract class. (Hugh Cayless, Mark Miller) * LUCENE-1808: Query.createWeight has been changed from protected to public. This will be a back compat break if you have overridden this method - but you are likely already affected by the LUCENE-1693 (make Weight abstract rather than an interface) back compat break if you have overridden Query.creatWeight, so we have taken the opportunity to make this change. (Tim Smith, Shai Erera via Mark Miller) * LUCENE-1708 - IndexReader.document() no longer checks if the document is deleted. You can call IndexReader.isDeleted(n) prior to calling document(n). (Shai Erera via Mike McCandless) Changes in runtime behavior * LUCENE-1424: QueryParser now by default uses constant score auto rewriting when it generates a WildcardQuery and PrefixQuery (it already does so for TermRangeQuery, as well). Call setMultiTermRewriteMethod(MultiTermQuery.SCORING_BOOLEAN_QUERY_REWRITE) to revert to slower BooleanQuery rewriting method. (Mark Miller via Mike McCandless) * LUCENE-1575: As of 2.9, the core collectors as well as IndexSearcher's search methods that return top N results, no longer filter out zero scoring documents. If you rely on this functionality you can use PositiveScoresOnlyCollector like this: TopDocsCollector tdc = new TopScoreDocCollector(10); Collector c = new PositiveScoresOnlyCollector(tdc); searcher.search(query, c); TopDocs hits = tdc.topDocs(); ... * LUCENE-1604: IndexReader.norms(String field) is now allowed to return null if the field has no norms, as long as you've previously called IndexReader.setDisableFakeNorms(true). This setting now defaults to false (to preserve the fake norms back compatible behavior) but in 3.0 will be hardwired to true. (Shon Vella via Mike McCandless). * LUCENE-1624: If you open IndexWriter with create=true and autoCommit=false on an existing index, IndexWriter no longer writes an empty commit when it's created. (Paul Taylor via Mike McCandless) * LUCENE-1593: When you call Sort() or Sort.setSort(String field, boolean reverse), the resulting SortField array no longer ends with SortField.FIELD_DOC (it was unnecessary as Lucene breaks ties internally by docID). (Shai Erera via Michael McCandless) * LUCENE-1542: When the first token(s) have 0 position increment, IndexWriter used to incorrectly record the position as -1, if no payload is present, or Integer.MAX_VALUE if a payload is present. This causes positional queries to fail to match. The bug is now fixed, but if your app relies on the buggy behavior then you must call IndexWriter.setAllowMinus1Position(). That API is deprecated so you must fix your application, and rebuild your index, to not rely on this behavior by the 3.0 release of Lucene. (Jonathan Mamou, Mark Miller via Mike McCandless) * LUCENE-1715: Finalizers have been removed from the 4 core classes that still had them, since they will cause GC to take longer, thus tying up memory for longer, and at best they mask buggy app code. DirectoryReader (returned from IndexReader.open) & IndexWriter previously released the write lock during finalize. SimpleFSDirectory.FSIndexInput closed the descriptor in its finalizer, and NativeFSLock released the lock. It's possible applications will be affected by this, but only if the application is failing to close reader/writers. (Brian Groose via Mike McCandless) * LUCENE-1717: Fixed IndexWriter to account for RAM usage of buffered deletions. (Mike McCandless) * LUCENE-1727: Ensure that fields are stored & retrieved in the exact order in which they were added to the document. This was true in all Lucene releases before 2.3, but was broken in 2.3 and 2.4, and is now fixed in 2.9. (Mike McCandless) * LUCENE-1678: The addition of Analyzer.reusableTokenStream accidentally broke back compatibility of external analyzers that subclassed core analyzers that implemented tokenStream but not reusableTokenStream. This is now fixed, such that if reusableTokenStream is invoked on such a subclass, that method will forcefully fallback to tokenStream. (Mike McCandless) * LUCENE-1801: Token.clear() and Token.clearNoTermBuffer() now also clear startOffset, endOffset and type. This is not likely to affect any Tokenizer chains, as Tokenizers normally always set these three values. This change was made to be conform to the new AttributeImpl.clear() and AttributeSource.clearAttributes() to work identical for Token as one for all AttributeImpl and the 6 separate AttributeImpls. (Uwe Schindler, Michael Busch) * LUCENE-1483: When searching over multiple segments, a new Scorer is now created for each segment. Searching has been telescoped out a level and IndexSearcher now operates much like MultiSearcher does. The Weight is created only once for the top level Searcher, but each Scorer is passed a per-segment IndexReader. This will result in doc ids in the Scorer being internal to the per-segment IndexReader. It has always been outside of the API to count on a given IndexReader to contain every doc id in the index - and if you have been ignoring MultiSearcher in your custom code and counting on this fact, you will find your code no longer works correctly. If a custom Scorer implementation uses any caches/filters that rely on being based on the top level IndexReader, it will need to be updated to correctly use contextless caches/filters eg you can't count on the IndexReader to contain any given doc id or all of the doc ids. (Mark Miller, Mike McCandless) * LUCENE-1846: DateTools now uses the US locale to format the numbers in its date/time strings instead of the default locale. For most locales there will be no change in the index format, as DateFormatSymbols is using ASCII digits. The usage of the US locale is important to guarantee correct ordering of generated terms. (Uwe Schindler) * LUCENE-1860: MultiTermQuery now defaults to CONSTANT_SCORE_AUTO_REWRITE_DEFAULT rewrite method (previously it was SCORING_BOOLEAN_QUERY_REWRITE). This means that PrefixQuery and WildcardQuery will now produce constant score for all matching docs, equal to the boost of the query. (Mike McCandless) API Changes * LUCENE-1419: Add expert API to set custom indexing chain. This API is package-protected for now, so we don't have to officially support it. Yet, it will give us the possibility to try out different consumers in the chain. (Michael Busch) * LUCENE-1427: DocIdSet.iterator() is now allowed to throw IOException. (Paul Elschot, Mike McCandless) * LUCENE-1422, LUCENE-1693: New TokenStream API that uses a new class called AttributeSource instead of the Token class, which is now a utility class that holds common Token attributes. All attributes that the Token class had have been moved into separate classes: TermAttribute, OffsetAttribute, PositionIncrementAttribute, PayloadAttribute, TypeAttribute and FlagsAttribute. The new API is much more flexible; it allows to combine the Attributes arbitrarily and also to define custom Attributes. The new API has the same performance as the old next(Token) approach. For conformance with this new API Tee-/SinkTokenizer was deprecated and replaced by a new TeeSinkTokenFilter. (Michael Busch, Uwe Schindler; additional contributions and bug fixes by Daniel Shane, Doron Cohen) * LUCENE-1467: Add nextDoc() and next(int) methods to OpenBitSetIterator. These methods can be used to avoid additional calls to doc(). (Michael Busch) * LUCENE-1468: Deprecate Directory.list(), which sometimes (in FSDirectory) filters out files that don't look like index files, in favor of new Directory.listAll(), which does no filtering. Also, listAll() will never return null; instead, it throws an IOException (or subclass). Specifically, FSDirectory.listAll() will throw the newly added NoSuchDirectoryException if the directory does not exist. (Marcel Reutegger, Mike McCandless) * LUCENE-1546: Add IndexReader.flush(Map commitUserData), allowing you to record an opaque commitUserData (maps String -> String) into the commit written by IndexReader. This matches IndexWriter's commit methods. (Jason Rutherglen via Mike McCandless) * LUCENE-652: Added org.apache.lucene.document.CompressionTools, to enable compressing & decompressing binary content, external to Lucene's indexing. Deprecated Field.Store.COMPRESS. * LUCENE-1561: Renamed Field.omitTf to Field.omitTermFreqAndPositions (Otis Gospodnetic via Mike McCandless) * LUCENE-1500: Added new InvalidTokenOffsetsException to Highlighter methods to denote issues when offsets in TokenStream tokens exceed the length of the provided text. (Mark Harwood) * LUCENE-1575, LUCENE-1483: HitCollector is now deprecated in favor of a new Collector abstract class. For easy migration, people can use HitCollectorWrapper which translates (wraps) HitCollector into Collector. Note that this class is also deprecated and will be removed when HitCollector is removed. Also TimeLimitedCollector is deprecated in favor of the new TimeLimitingCollector which extends Collector. (Shai Erera, Mark Miller, Mike McCandless) * LUCENE-1592: The method TermsEnum.skipTo() was deprecated, because it is used nowhere in core/contrib and there is only a very ineffective default implementation available. If you want to position a TermEnum to another Term, create a new one using IndexReader.terms(Term). (Uwe Schindler) * LUCENE-1621: MultiTermQuery.getTerm() has been deprecated as it does not make sense for all subclasses of MultiTermQuery. Check individual subclasses to see if they support getTerm(). (Mark Miller) * LUCENE-1636: Make TokenFilter.input final so it's set only once. (Wouter Heijke, Uwe Schindler via Mike McCandless). * LUCENE-1658, LUCENE-1451: Renamed FSDirectory to SimpleFSDirectory (but left an FSDirectory base class). Added an FSDirectory.open static method to pick a good default FSDirectory implementation given the OS. FSDirectories should now be instantiated using FSDirectory.open or with public constructors rather than FSDirectory.getDirectory(), which has been deprecated. (Michael McCandless, Uwe Schindler, yonik) * LUCENE-1665: Deprecate SortField.AUTO, to be removed in 3.0. Instead, when sorting by field, the application should explicitly state the type of the field. (Mike McCandless) * LUCENE-1660: StopFilter, StandardAnalyzer, StopAnalyzer now require up front specification of enablePositionIncrement (Mike McCandless) * LUCENE-1614: DocIdSetIterator's next() and skipTo() were deprecated in favor of the new nextDoc() and advance(). The new methods return the doc Id they landed on, saving an extra call to doc() in most cases. For easy migration of the code, you can change the calls to next() to nextDoc() != DocIdSetIterator.NO_MORE_DOCS and similarly for skipTo(). However it is advised that you take advantage of the returned doc ID and not call doc() following those two. Also, doc() was deprecated in favor of docID(). docID() should return -1 or NO_MORE_DOCS if nextDoc/advance were not called yet, or NO_MORE_DOCS if the iterator has exhausted. Otherwise it should return the current doc ID. (Shai Erera via Mike McCandless) * LUCENE-1672: All ctors/opens and other methods using String/File to specify the directory in IndexReader, IndexWriter, and IndexSearcher were deprecated. You should instantiate the Directory manually before and pass it to these classes (LUCENE-1451, LUCENE-1658). (Uwe Schindler) * LUCENE-1407: Move RemoteSearchable, RemoteCachingWrapperFilter out of Lucene's core into new contrib/remote package. Searchable no longer extends java.rmi.Remote (Simon Willnauer via Mike McCandless) * LUCENE-1677: The global property org.apache.lucene.SegmentReader.class, and ReadOnlySegmentReader.class are now deprecated, to be removed in 3.0. src/gcj/* has been removed. (Earwin Burrfoot via Mike McCandless) * LUCENE-1673: Deprecated NumberTools in favour of the new NumericRangeQuery and its new indexing format for numeric or date values. (Uwe Schindler) * LUCENE-1630, LUCENE-1771: Weight is now an abstract class, and adds a scorer(IndexReader, boolean /* scoreDocsInOrder */, boolean /* topScorer */) method instead of scorer(IndexReader). IndexSearcher uses this method to obtain a scorer matching the capabilities of the Collector wrt orderedness of docIDs. Some Scorers (like BooleanScorer) are much more efficient if out-of-order documents scoring is allowed by a Collector. Collector must now implement acceptsDocsOutOfOrder. If you write a Collector which does not care about doc ID orderness, it is recommended that you return true. Weight has a scoresDocsOutOfOrder method, which by default returns false. If you create a Weight which will score documents out of order if requested, you should override that method to return true. BooleanQuery's setAllowDocsOutOfOrder and getAllowDocsOutOfOrder have been deprecated as they are not needed anymore. BooleanQuery will now score docs out of order when used with a Collector that can accept docs out of order. Finally, Weight#explain now takes a sub-reader and sub-docID, rather than a top level reader and docID. (Shai Erera, Chris Hostetter, Martin Ruckli, Mark Miller via Mike McCandless) * LUCENE-1466, LUCENE-1906: Added CharFilter and MappingCharFilter, which allows chaining & mapping of characters before tokenizers run. CharStream (subclass of Reader) is the base class for custom java.io.Reader's, that support offset correction. Tokenizers got an additional method correctOffset() that is passed down to the underlying CharStream if input is a subclass of CharStream/-Filter. (Koji Sekiguchi via Mike McCandless, Uwe Schindler) * LUCENE-1703: Add IndexWriter.waitForMerges. (Tim Smith via Mike McCandless) * LUCENE-1625: CheckIndex's programmatic API now returns separate classes detailing the status of each component in the index, and includes more detailed status than previously. (Tim Smith via Mike McCandless) * LUCENE-1713: Deprecated RangeQuery and RangeFilter and renamed to TermRangeQuery and TermRangeFilter. TermRangeQuery is in constant score auto rewrite mode by default. The new classes also have new ctors taking field and term ranges as Strings (see also LUCENE-1424). (Uwe Schindler) * LUCENE-1609: The termInfosIndexDivisor must now be specified up-front when opening the IndexReader. Attempts to call IndexReader.setTermInfosIndexDivisor will hit an UnsupportedOperationException. This was done to enable removal of all synchronization in TermInfosReader, which previously could cause threads to pile up in certain cases. (Dan Rosher via Mike McCandless) * LUCENE-1688: Deprecate static final String stop word array in and StopAnalzyer and replace it with an immutable implementation of CharArraySet. (Simon Willnauer via Mark Miller) * LUCENE-1742: SegmentInfos, SegmentInfo and SegmentReader have been made public as expert, experimental APIs. These APIs may suddenly change from release to release (Jason Rutherglen via Mike McCandless). * LUCENE-1754: QueryWeight.scorer() can return null if no documents are going to be matched by the query. Similarly, Filter.getDocIdSet() can return null if no documents are going to be accepted by the Filter. Note that these 'can' return null, however they don't have to and can return a Scorer/DocIdSet which does not match / reject all documents. This is already the behavior of some QueryWeight/Filter implementations, and is documented here just for emphasis. (Shai Erera via Mike McCandless) * LUCENE-1705: Added IndexWriter.deleteAllDocuments. (Tim Smith via Mike McCandless) * LUCENE-1460: Changed TokenStreams/TokenFilters in contrib to use the new TokenStream API. (Robert Muir, Michael Busch) * LUCENE-1748: LUCENE-1001 introduced PayloadSpans, but this was a back compat break and caused custom SpanQuery implementations to fail at runtime in a variety of ways. This issue attempts to remedy things by causing a compile time break on custom SpanQuery implementations and removing the PayloadSpans class, with its functionality now moved to Spans. To help in alleviating future back compat pain, Spans has been changed from an interface to an abstract class. (Hugh Cayless, Mark Miller) * LUCENE-1808: Query.createWeight has been changed from protected to public. (Tim Smith, Shai Erera via Mark Miller) * LUCENE-1826: Add constructors that take AttributeSource and AttributeFactory to all Tokenizer implementations. (Michael Busch) * LUCENE-1847: Similarity#idf for both a Term and Term Collection have been deprecated. New versions that return an IDFExplanation have been added. (Yasoja Seneviratne, Mike McCandless, Mark Miller) * LUCENE-1877: Made NativeFSLockFactory the default for the new FSDirectory API (open(), FSDirectory subclass ctors). All FSDirectory system properties were deprecated and all lock implementations use no lock prefix if the locks are stored inside the index directory. Because the deprecated String/File ctors of IndexWriter and IndexReader (LUCENE-1672) and FSDirectory.getDirectory() still use the old SimpleFSLockFactory and the new API NativeFSLockFactory, we strongly recommend not to mix deprecated and new API. (Uwe Schindler, Mike McCandless) * LUCENE-1911: Added a new method isCacheable() to DocIdSet. This method should return true, if the underlying implementation does not use disk I/O and is fast enough to be directly cached by CachingWrapperFilter. OpenBitSet, SortedVIntList, and DocIdBitSet are such candidates. The default implementation of the abstract DocIdSet class returns false. In this case, CachingWrapperFilter copies the DocIdSetIterator into an OpenBitSet for caching. (Uwe Schindler, Thomas Becker) Bug fixes * LUCENE-1415: MultiPhraseQuery has incorrect hashCode() and equals() implementation - Leads to Solr Cache misses. (Todd Feak, Mark Miller via yonik) * LUCENE-1327: Fix TermSpans#skipTo() to behave as specified in javadocs of Terms#skipTo(). (Michael Busch) * LUCENE-1573: Do not ignore InterruptedException (caused by Thread.interrupt()) nor enter deadlock/spin loop. Now, an interrupt will cause a RuntimeException to be thrown. In 3.0 we will change public APIs to throw InterruptedException. (Jeremy Volkman via Mike McCandless) * LUCENE-1590: Fixed stored-only Field instances do not change the value of omitNorms, omitTermFreqAndPositions in FieldInfo; when you retrieve such fields they will now have omitNorms=true and omitTermFreqAndPositions=false (though these values are unused). (Uwe Schindler via Mike McCandless) * LUCENE-1587: RangeQuery#equals() could consider a RangeQuery without a collator equal to one with a collator. (Mark Platvoet via Mark Miller) * LUCENE-1600: Don't call String.intern unnecessarily in some cases when loading documents from the index. (P Eger via Mike McCandless) * LUCENE-1611: Fix case where OutOfMemoryException in IndexWriter could cause "infinite merging" to happen. (Christiaan Fluit via Mike McCandless) * LUCENE-1623: Properly handle back-compatibility of 2.3.x indexes that contain field names with non-ascii characters. (Mike Streeton via Mike McCandless) * LUCENE-1593: MultiSearcher and ParallelMultiSearcher did not break ties (in sort) by doc Id in a consistent manner (i.e., if Sort.FIELD_DOC was used vs. when it wasn't). (Shai Erera via Michael McCandless) * LUCENE-1647: Fix case where IndexReader.undeleteAll would cause the segment's deletion count to be incorrect. (Mike McCandless) * LUCENE-1542: When the first token(s) have 0 position increment, IndexWriter used to incorrectly record the position as -1, if no payload is present, or Integer.MAX_VALUE if a payload is present. This causes positional queries to fail to match. The bug is now fixed, but if your app relies on the buggy behavior then you must call IndexWriter.setAllowMinus1Position(). That API is deprecated so you must fix your application, and rebuild your index, to not rely on this behavior by the 3.0 release of Lucene. (Jonathan Mamou, Mark Miller via Mike McCandless) * LUCENE-1658: Fixed MMapDirectory to correctly throw IOExceptions on EOF, removed numeric overflow possibilities and added support for a hack to unmap the buffers on closing IndexInput. (Uwe Schindler) * LUCENE-1681: Fix infinite loop caused by a call to DocValues methods getMinValue, getMaxValue, getAverageValue. (Simon Willnauer via Mark Miller) * LUCENE-1599: Add clone support for SpanQuerys. SpanRegexQuery counts on this functionality and does not work correctly without it. (Billow Gao, Mark Miller) * LUCENE-1718: Fix termInfosIndexDivisor to carry over to reopened readers (Mike McCandless) * LUCENE-1583: SpanOrQuery skipTo() doesn't always move forwards as Spans documentation indicates it should. (Moti Nisenson via Mark Miller) * LUCENE-1566: Sun JVM Bug http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=6478546 causes invalid OutOfMemoryError when reading too many bytes at once from a file on 32bit JVMs that have a large maximum heap size. This fix adds set/getReadChunkSize to FSDirectory so that large reads are broken into chunks, to work around this JVM bug. On 32bit JVMs the default chunk size is 100 MB; on 64bit JVMs, which don't show the bug, the default is Integer.MAX_VALUE. (Simon Willnauer via Mike McCandless) * LUCENE-1448: Added TokenStream.end() to perform end-of-stream operations (ie to return the end offset of the tokenization). This is important when multiple fields with the same name are added to a document, to ensure offsets recorded in term vectors for all of the instances are correct. (Mike McCandless, Mark Miller, Michael Busch) * LUCENE-1805: CloseableThreadLocal did not allow a null Object in get(), although it does allow it in set(Object). Fix get() to not assert the object is not null. (Shai Erera via Mike McCandless) * LUCENE-1801: Changed all Tokenizers or TokenStreams in core/contrib) that are the source of Tokens to always call AttributeSource.clearAttributes() first. (Uwe Schindler) * LUCENE-1819: MatchAllDocsQuery.toString(field) should produce output that is parsable by the QueryParser. (John Wang, Mark Miller) * LUCENE-1836: Fix localization bug in the new query parser and add new LocalizedTestCase as base class for localization junit tests. (Robert Muir, Uwe Schindler via Michael Busch) * LUCENE-1847: PhraseQuery/TermQuery/SpanQuery use IndexReader specific stats in their Weight#explain methods - these stats should be corpus wide. (Yasoja Seneviratne, Mike McCandless, Mark Miller) * LUCENE-1885: Fix the bug that NativeFSLock.isLocked() did not work, if the lock was obtained by another NativeFSLock(Factory) instance. Because of this IndexReader.isLocked() and IndexWriter.isLocked() did not work correctly. (Uwe Schindler) * LUCENE-1899: Fix O(N^2) CPU cost when setting docIDs in order in an OpenBitSet, due to an inefficiency in how the underlying storage is reallocated. (Nadav Har'El via Mike McCandless) * LUCENE-1918: Fixed cases where a ParallelReader would generate exceptions on being passed to IndexWriter.addIndexes(IndexReader[]). First case was when the ParallelReader was empty. Second case was when the ParallelReader used to contain documents with TermVectors, but all such documents have been deleted. (Christian Kohlschütter via Mike McCandless) New features * LUCENE-1411: Added expert API to open an IndexWriter on a prior commit, obtained from IndexReader.listCommits. This makes it possible to rollback changes to an index even after you've closed the IndexWriter that made the changes, assuming you are using an IndexDeletionPolicy that keeps past commits around. This is useful when building transactional support on top of Lucene. (Mike McCandless) * LUCENE-1382: Add an optional arbitrary Map (String -> String) "commitUserData" to IndexWriter.commit(), which is stored in the segments file and is then retrievable via IndexReader.getCommitUserData instance and static methods. (Shalin Shekhar Mangar via Mike McCandless) * LUCENE-1420: Similarity now has a computeNorm method that allows custom Similarity classes to override how norm is computed. It's provided a FieldInvertState instance that contains details from inverting the field. The default impl is boost * lengthNorm(numTerms), to be backwards compatible. Also added {set/get}DiscountOverlaps to DefaultSimilarity, to control whether overlapping tokens (tokens with 0 position increment) should be counted in lengthNorm. (Andrzej Bialecki via Mike McCandless) * LUCENE-1424: Moved constant score query rewrite capability into MultiTermQuery, allowing TermRangeQuery, PrefixQuery and WildcardQuery to switch between constant-score rewriting or BooleanQuery expansion rewriting via a new setRewriteMethod method. Deprecated ConstantScoreRangeQuery (Mark Miller via Mike McCandless) * LUCENE-1461: Added FieldCacheRangeFilter, a RangeFilter for single-term fields that uses FieldCache to compute the filter. If your documents all have a single term for a given field, and you need to create many RangeFilters with varying lower/upper bounds, then this is likely a much faster way to create the filters than RangeFilter. FieldCacheRangeFilter allows ranges on all data types, FieldCache supports (term ranges, byte, short, int, long, float, double). However, it comes at the expense of added RAM consumption and slower first-time usage due to populating the FieldCache. It also does not support collation (Tim Sturge, Matt Ericson via Mike McCandless and Uwe Schindler) * LUCENE-1296: add protected method CachingWrapperFilter.docIdSetToCache to allow subclasses to choose which DocIdSet implementation to use (Paul Elschot via Mike McCandless) * LUCENE-1390: Added ASCIIFoldingFilter, a Filter that converts alphabetic, numeric, and symbolic Unicode characters which are not in the first 127 ASCII characters (the "Basic Latin" Unicode block) into their ASCII equivalents, if one exists. ISOLatin1AccentFilter, which handles a subset of this filter, has been deprecated. (Andi Vajda, Steven Rowe via Mark Miller) * LUCENE-1478: Added new SortField constructor allowing you to specify a custom FieldCache parser to generate numeric values from terms for a field. (Uwe Schindler via Mike McCandless) * LUCENE-1528: Add support for Ideographic Space to the queryparser. (Luis Alves via Michael Busch) * LUCENE-1487: Added FieldCacheTermsFilter, to filter by multiple terms on single-valued fields. The filter loads the FieldCache for the field the first time it's called, and subsequent usage of that field, even with different Terms in the filter, are fast. (Tim Sturge, Shalin Shekhar Mangar via Mike McCandless). * LUCENE-1314: Add clone(), clone(boolean readOnly) and reopen(boolean readOnly) to IndexReader. Cloning an IndexReader gives you a new reader which you can make changes to (deletions, norms) without affecting the original reader. Now, with clone or reopen you can change the readOnly of the original reader. (Jason Rutherglen, Mike McCandless) * LUCENE-1506: Added FilteredDocIdSet, an abstract class which you subclass to implement the "match" method to accept or reject each docID. Unlike ChainedFilter (under contrib/misc), FilteredDocIdSet never requires you to materialize the full bitset. Instead, match() is called on demand per docID. (John Wang via Mike McCandless) * LUCENE-1398: Add ReverseStringFilter to contrib/analyzers, a filter to reverse the characters in each token. (Koji Sekiguchi via yonik) * LUCENE-1551: Add expert IndexReader.reopen(IndexCommit) to allow efficiently opening a new reader on a specific commit, sharing resources with the original reader. (Torin Danil via Mike McCandless) * LUCENE-1434: Added org.apache.lucene.util.IndexableBinaryStringTools, to encode byte[] as String values that are valid terms, and maintain sort order of the original byte[] when the bytes are interpreted as unsigned. (Steven Rowe via Mike McCandless) * LUCENE-1543: Allow MatchAllDocsQuery to optionally use norms from a specific fields to set the score for a document. (Karl Wettin via Mike McCandless) * LUCENE-1586: Add IndexReader.getUniqueTermCount(). (Mike McCandless via Derek) * LUCENE-1516: Added "near real-time search" to IndexWriter, via a new expert getReader() method. This method returns a reader that searches the full index, including any uncommitted changes in the current IndexWriter session. This should result in a faster turnaround than the normal approach of commiting the changes and then reopening a reader. (Jason Rutherglen via Mike McCandless) * LUCENE-1603: Added new MultiTermQueryWrapperFilter, to wrap any MultiTermQuery as a Filter. Also made some improvements to MultiTermQuery: return DocIdSet.EMPTY_DOCIDSET if there are no terms in the enum; track the total number of terms it visited during rewrite (getTotalNumberOfTerms). FilteredTermEnum is also more friendly to subclassing. (Uwe Schindler via Mike McCandless) * LUCENE-1605: Added BitVector.subset(). (Jeremy Volkman via Mike McCandless) * LUCENE-1618: Added FileSwitchDirectory that enables files with specified extensions to be stored in a primary directory and the rest of the files to be stored in the secondary directory. For example, this can be useful for the large doc-store (stored fields, term vectors) files in FSDirectory and the rest of the index files in a RAMDirectory. (Jason Rutherglen via Mike McCandless) * LUCENE-1494: Added FieldMaskingSpanQuery which can be used to cross-correlate Spans from different fields. (Paul Cowan and Chris Hostetter) * LUCENE-1634: Add calibrateSizeByDeletes to LogMergePolicy, to take deletions into account when considering merges. (Yasuhiro Matsuda via Mike McCandless) * LUCENE-1550: Added new n-gram based String distance measure for spell checking. See the Javadocs for NGramDistance.java for a reference paper on why this is helpful (Tom Morton via Grant Ingersoll) * LUCENE-1470, LUCENE-1582, LUCENE-1602, LUCENE-1673, LUCENE-1701, LUCENE-1712: Added NumericRangeQuery and NumericRangeFilter, a fast alternative to RangeQuery/RangeFilter for numeric searches. They depend on a specific structure of terms in the index that can be created by indexing using the new NumericField or NumericTokenStream classes. NumericField can only be used for indexing and optionally stores the values as string representation in the doc store. Documents returned from IndexReader/IndexSearcher will return only the String value using the standard Fieldable interface. NumericFields can be sorted on and loaded into the FieldCache. (Uwe Schindler, Yonik Seeley, Mike McCandless) * LUCENE-1405: Added support for Ant resource collections in contrib/ant task. (Przemyslaw Sztoch via Erik Hatcher) * LUCENE-1699: Allow setting a TokenStream on Field/Fieldable for indexing in conjunction with any other ways to specify stored field values, currently binary or string values. (yonik) * LUCENE-1701: Made the standard FieldCache.Parsers public and added parsers for fields generated using NumericField/NumericTokenStream. All standard parsers now also implement Serializable and enforce their singleton status. (Uwe Schindler, Mike McCandless) * LUCENE-1741: User configurable maximum chunk size in MMapDirectory. On 32 bit platforms, the address space can be very fragmented, so one big ByteBuffer for the whole file may not fit into address space. (Eks Dev via Uwe Schindler) * LUCENE-1644: Enable 4 rewrite modes for queries deriving from MultiTermQuery (WildcardQuery, PrefixQuery, TermRangeQuery, NumericRangeQuery): CONSTANT_SCORE_FILTER_REWRITE first creates a filter and then assigns constant score (boost) to docs; CONSTANT_SCORE_BOOLEAN_QUERY_REWRITE create a BooleanQuery but uses a constant score (boost); SCORING_BOOLEAN_QUERY_REWRITE also creates a BooleanQuery but keeps the BooleanQuery's scores; CONSTANT_SCORE_AUTO_REWRITE tries to pick the most performant constant-score rewrite method. (Mike McCandless) * LUCENE-1448: Added TokenStream.end(), to perform end-of-stream operations. This is currently used to fix offset problems when multiple fields with the same name are added to a document. (Mike McCandless, Mark Miller, Michael Busch) * LUCENE-1776: Add an option to not collect payloads for an ordered SpanNearQuery. Payloads were not lazily loaded in this case as the javadocs implied. If you have payloads and want to use an ordered SpanNearQuery that does not need to use the payloads, you can disable loading them with a new constructor switch. (Mark Miller) * LUCENE-1341: Added PayloadNearQuery to enable SpanNearQuery functionality with payloads (Peter Keegan, Grant Ingersoll, Mark Miller) * LUCENE-1790: Added PayloadTermQuery to enable scoring of payloads based on the maximum payload seen for a document. Slight refactoring of Similarity and other payload queries (Grant Ingersoll, Mark Miller) * LUCENE-1749: Addition of FieldCacheSanityChecker utility, and hooks to use it in all existing Lucene Tests. This class can be used by any application to inspect the FieldCache and provide diagnostic information about the possibility of inconsistent FieldCache usage. Namely: FieldCache entries for the same field with different datatypes or parsers; and FieldCache entries for the same field in both a reader, and one of it's (descendant) sub readers. (Chris Hostetter, Mark Miller) * LUCENE-1789: Added utility class oal.search.function.MultiValueSource to ease the transition to segment based searching for any apps that directly call oal.search.function.* APIs. This class wraps any other ValueSource, but takes care when composite (multi-segment) are passed to not double RAM usage in the FieldCache. (Chris Hostetter, Mark Miller, Mike McCandless) Optimizations * LUCENE-1427: Fixed QueryWrapperFilter to not waste time computing scores of the query, since they are just discarded. Also, made it more efficient (single pass) by not creating & populating an intermediate OpenBitSet (Paul Elschot, Mike McCandless) * LUCENE-1443: Performance improvement for OpenBitSetDISI.inPlaceAnd() (Paul Elschot via yonik) * LUCENE-1484: Remove synchronization of IndexReader.document() by using CloseableThreadLocal internally. (Jason Rutherglen via Mike McCandless). * LUCENE-1124: Short circuit FuzzyQuery.rewrite when input token length is small compared to minSimilarity. (Timo Nentwig, Mark Miller) * LUCENE-1316: MatchAllDocsQuery now avoids the synchronized IndexReader.isDeleted() call per document, by directly accessing the underlying deleteDocs BitVector. This improves performance with non-readOnly readers, especially in a multi-threaded environment. (Todd Feak, Yonik Seeley, Jason Rutherglen via Mike McCandless) * LUCENE-1483: When searching over multiple segments we now visit each sub-reader one at a time. This speeds up warming, since FieldCache entries (if required) can be shared across reopens for those segments that did not change, and also speeds up searches that sort by relevance or by field values. (Mark Miller, Mike McCandless) * LUCENE-1575: The new Collector class decouples collect() from score computation. Collector.setScorer is called to establish the current Scorer in-use per segment. Collectors that require the score should then call Scorer.score() per hit inside collect(). (Shai Erera via Mike McCandless) * LUCENE-1596: MultiTermDocs speedup when set with MultiTermDocs.seek(MultiTermEnum) (yonik) * LUCENE-1653: Avoid creating a Calendar in every call to DateTools#dateToString, DateTools#timeToString and DateTools#round. (Shai Erera via Mark Miller) * LUCENE-1688: Deprecate static final String stop word array and replace it with an immutable implementation of CharArraySet. Removes conversions between Set and array. (Simon Willnauer via Mark Miller) * LUCENE-1754: BooleanQuery.queryWeight.scorer() will return null if it won't match any documents (e.g. if there are no required and optional scorers, or not enough optional scorers to satisfy minShouldMatch). (Shai Erera via Mike McCandless) * LUCENE-1607: To speed up string interning for commonly used strings, the StringHelper.intern() interface was added with a default implementation that uses a lockless cache. (Earwin Burrfoot, yonik) * LUCENE-1800: QueryParser should use reusable TokenStreams. (yonik) Documentation * LUCENE-1908: Scoring documentation imrovements in Similarity javadocs. (Mark Miller, Shai Erera, Ted Dunning, Jiri Kuhn, Marvin Humphrey, Doron Cohen) * LUCENE-1872: NumericField javadoc improvements (Michael McCandless, Uwe Schindler) * LUCENE-1875: Make TokenStream.end javadoc less confusing. (Uwe Schindler) * LUCENE-1862: Rectified duplicate package level javadocs for o.a.l.queryParser and o.a.l.analysis.cn. (Chris Hostetter) * LUCENE-1886: Improved hyperlinking in key Analysis javadocs (Bernd Fondermann via Chris Hostetter) * LUCENE-1884: massive javadoc and comment cleanup, primarily dealing with typos. (Robert Muir via Chris Hostetter) * LUCENE-1898: Switch changes to use bullets rather than numbers and update changes-to-html script to handle the new format. (Steven Rowe, Mark Miller) * LUCENE-1900: Improve Searchable Javadoc. (Nadav Har'El, Doron Cohen, Marvin Humphrey, Mark Miller) * LUCENE-1896: Improve Similarity#queryNorm javadocs. (Jiri Kuhn, Mark Miller) Build * LUCENE-1440: Add new targets to build.xml that allow downloading and executing the junit testcases from an older release for backwards-compatibility testing. (Michael Busch) * LUCENE-1446: Add compatibility tag to common-build.xml and run backwards-compatibility tests in the nightly build. (Michael Busch) * LUCENE-1529: Properly test "drop-in" replacement of jar with backwards-compatibility tests. (Mike McCandless, Michael Busch) * LUCENE-1851: Change 'javacc' and 'clean-javacc' targets to build and clean contrib/surround files. (Luis Alves via Michael Busch) * LUCENE-1854: tar task should use longfile="gnu" to avoid false file name length warnings. (Mark Miller) Test Cases * LUCENE-1791: Enhancements to the QueryUtils and CheckHits utility classes to wrap IndexReaders and Searchers in MultiReaders or MultiSearcher when possible to help exercise more edge cases. (Chris Hostetter, Mark Miller) * LUCENE-1852: Fix localization test failures. (Robert Muir via Michael Busch) * LUCENE-1843: Refactored all tests that use assertAnalyzesTo() & others in core and contrib to use a new BaseTokenStreamTestCase base class. Also rewrote some tests to use this general analysis assert functions instead of own ones (e.g. TestMappingCharFilter). The new base class also tests tokenization with the TokenStream.next() backwards layer enabled (using Token/TokenWrapper as attribute implementation) and disabled (default for Lucene 3.0) (Uwe Schindler, Robert Muir) * LUCENE-1836: Added a new LocalizedTestCase as base class for localization junit tests. (Robert Muir, Uwe Schindler via Michael Busch) ======================= Release 2.4.1 2009-03-09 ======================= API Changes 1. LUCENE-1186: Add Analyzer.close() to free internal ThreadLocal resources. (Christian Kohlschütter via Mike McCandless) Bug fixes 1. LUCENE-1452: Fixed silent data-loss case whereby binary fields are truncated to 0 bytes during merging if the segments being merged are non-congruent (same field name maps to different field numbers). This bug was introduced with LUCENE-1219. (Andrzej Bialecki via Mike McCandless). 2. LUCENE-1429: Don't throw incorrect IllegalStateException from IndexWriter.close() if you've hit an OOM when autoCommit is true. (Mike McCandless) 3. LUCENE-1474: If IndexReader.flush() is called twice when there were pending deletions, it could lead to later false AssertionError during IndexReader.open. (Mike McCandless) 4. LUCENE-1430: Fix false AlreadyClosedException from IndexReader.open (masking an actual IOException) that takes String or File path. (Mike McCandless) 5. LUCENE-1442: Multiple-valued NOT_ANALYZED fields can double-count token offsets. (Mike McCandless) 6. LUCENE-1453: Ensure IndexReader.reopen()/clone() does not result in incorrectly closing the shared FSDirectory. This bug would only happen if you use IndexReader.open() with a File or String argument. The returned readers are wrapped by a FilterIndexReader that correctly handles closing of directory after reopen()/clone(). (Mark Miller, Uwe Schindler, Mike McCandless) 7. LUCENE-1457: Fix possible overflow bugs during binary searches. (Mark Miller via Mike McCandless) 8. LUCENE-1459: Fix CachingWrapperFilter to not throw exception if both bits() and getDocIdSet() methods are called. (Matt Jones via Mike McCandless) 9. LUCENE-1519: Fix int overflow bug during segment merging. (Deepak via Mike McCandless) 10. LUCENE-1521: Fix int overflow bug when flushing segment. (Shon Vella via Mike McCandless). 11. LUCENE-1544: Fix deadlock in IndexWriter.addIndexes(IndexReader[]). (Mike McCandless via Doug Sale) 12. LUCENE-1547: Fix rare thread safety issue if two threads call IndexWriter commit() at the same time. (Mike McCandless) 13. LUCENE-1465: NearSpansOrdered returns payloads from first possible match rather than the correct, shortest match; Payloads could be returned even if the max slop was exceeded; The wrong payload could be returned in certain situations. (Jonathan Mamou, Greg Shackles, Mark Miller) 14. LUCENE-1186: Add Analyzer.close() to free internal ThreadLocal resources. (Christian Kohlschütter via Mike McCandless) 15. LUCENE-1552: Fix IndexWriter.addIndexes(IndexReader[]) to properly rollback IndexWriter's internal state on hitting an exception. (Scott Garland via Mike McCandless) ======================= Release 2.4.0 2008-10-06 ======================= Changes in backwards compatibility policy 1. LUCENE-1340: In a minor change to Lucene's backward compatibility policy, we are now allowing the Fieldable interface to have changes, within reason, and made on a case-by-case basis. If an application implements it's own Fieldable, please be aware of this. Otherwise, no need to be concerned. This is in effect for all 2.X releases, starting with 2.4. Also note, that in all likelihood, Fieldable will be changed in 3.0. Changes in runtime behavior 1. LUCENE-1151: Fix StandardAnalyzer to not mis-identify host names (eg lucene.apache.org) as an ACRONYM. To get back to the pre-2.4 backwards compatible, but buggy, behavior, you can either call StandardAnalyzer.setDefaultReplaceInvalidAcronym(false) (static method), or, set system property org.apache.lucene.analysis.standard.StandardAnalyzer.replaceInvalidAcronym to "false" on JVM startup. All StandardAnalyzer instances created after that will then show the pre-2.4 behavior. Alternatively, you can call setReplaceInvalidAcronym(false) to change the behavior per instance of StandardAnalyzer. This backwards compatibility will be removed in 3.0 (hardwiring the value to true). (Mike McCandless) 2. LUCENE-1044: IndexWriter with autoCommit=true now commits (such that a reader can see the changes) far less often than it used to. Previously, every flush was also a commit. You can always force a commit by calling IndexWriter.commit(). Furthermore, in 3.0, autoCommit will be hardwired to false (IndexWriter constructors that take an autoCommit argument have been deprecated) (Mike McCandless) 3. LUCENE-1335: IndexWriter.addIndexes(Directory[]) and addIndexesNoOptimize no longer allow the same Directory instance to be passed in more than once. Internally, IndexWriter uses Directory and segment name to uniquely identify segments, so adding the same Directory more than once was causing duplicates which led to problems (Mike McCandless) 4. LUCENE-1396: Improve PhraseQuery.toString() so that gaps in the positions are indicated with a ? and multiple terms at the same position are joined with a |. (Andrzej Bialecki via Mike McCandless) API Changes 1. LUCENE-1084: Changed all IndexWriter constructors to take an explicit parameter for maximum field size. Deprecated all the pre-existing constructors; these will be removed in release 3.0. NOTE: these new constructors set autoCommit to false. (Steven Rowe via Mike McCandless) 2. LUCENE-584: Changed Filter API to return a DocIdSet instead of a java.util.BitSet. This allows using more efficient data structures for Filters and makes them more flexible. This deprecates Filter.bits(), so all filters that implement this outside the Lucene code base will need to be adapted. See also the javadocs of the Filter class. (Paul Elschot, Michael Busch) 3. LUCENE-1044: Added IndexWriter.commit() which flushes any buffered adds/deletes and then commits a new segments file so readers will see the changes. Deprecate IndexWriter.flush() in favor of IndexWriter.commit(). (Mike McCandless) 4. LUCENE-325: Added IndexWriter.expungeDeletes methods, which consult the MergePolicy to find merges necessary to merge away all deletes from the index. This should be a somewhat lower cost operation than optimize. (John Wang via Mike McCandless) 5. LUCENE-1233: Return empty array instead of null when no fields match the specified name in these methods in Document: getFieldables, getFields, getValues, getBinaryValues. (Stefan Trcek vai Mike McCandless) 6. LUCENE-1234: Make BoostingSpanScorer protected. (Andi Vajda via Grant Ingersoll) 7. LUCENE-510: The index now stores strings as true UTF-8 bytes (previously it was Java's modified UTF-8). If any text, either stored fields or a token, has illegal UTF-16 surrogate characters, these characters are now silently replaced with the Unicode replacement character U+FFFD. This is a change to the index file format. (Marvin Humphrey via Mike McCandless) 8. LUCENE-852: Let the SpellChecker caller specify IndexWriter mergeFactor and RAM buffer size. (Otis Gospodnetic) 9. LUCENE-1290: Deprecate org.apache.lucene.search.Hits, Hit and HitIterator and remove all references to these classes from the core. Also update demos and tutorials. (Michael Busch) 10. LUCENE-1288: Add getVersion() and getGeneration() to IndexCommit. getVersion() returns the same value that IndexReader.getVersion() returns when the reader is opened on the same commit. (Jason Rutherglen via Mike McCandless) 11. LUCENE-1311: Added IndexReader.listCommits(Directory) static method to list all commits in a Directory, plus IndexReader.open methods that accept an IndexCommit and open the index as of that commit. These methods are only useful if you implement a custom DeletionPolicy that keeps more than the last commit around. (Jason Rutherglen via Mike McCandless) 12. LUCENE-1325: Added IndexCommit.isOptimized(). (Shalin Shekhar Mangar via Mike McCandless) 13. LUCENE-1324: Added TokenFilter.reset(). (Shai Erera via Mike McCandless) 14. LUCENE-1340: Added Fieldable.omitTf() method to skip indexing term frequency, positions and payloads. This saves index space, and indexing/searching time. (Eks Dev via Mike McCandless) 15. LUCENE-1219: Add basic reuse API to Fieldable for binary fields: getBinaryValue/Offset/Length(); currently only lazy fields reuse the provided byte[] result to getBinaryValue. (Eks Dev via Mike McCandless) 16. LUCENE-1334: Add new constructor for Term: Term(String fieldName) which defaults term text to "". (DM Smith via Mike McCandless) 17. LUCENE-1333: Added Token.reinit(*) APIs to re-initialize (reuse) a Token. Also added term() method to return a String, with a performance penalty clearly documented. Also implemented hashCode() and equals() in Token, and fixed all core and contrib analyzers to use the re-use APIs. (DM Smith via Mike McCandless) 18. LUCENE-1329: Add optional readOnly boolean when opening an IndexReader. A readOnly reader is not allowed to make changes (deletions, norms) to the index; in exchanged, the isDeleted method, often a bottleneck when searching with many threads, is not synchronized. The default for readOnly is still false, but in 3.0 the default will become true. (Jason Rutherglen via Mike McCandless) 19. LUCENE-1367: Add IndexCommit.isDeleted(). (Shalin Shekhar Mangar via Mike McCandless) 20. LUCENE-1061: Factored out all "new XXXQuery(...)" in QueryParser.java into protected methods newXXXQuery(...) so that subclasses can create their own subclasses of each Query type. (John Wang via Mike McCandless) 21. LUCENE-753: Added new Directory implementation org.apache.lucene.store.NIOFSDirectory, which uses java.nio's FileChannel to do file reads. On most non-Windows platforms, with many threads sharing a single searcher, this may yield sizable improvement to query throughput when compared to FSDirectory, which only allows a single thread to read from an open file at a time. (Jason Rutherglen via Mike McCandless) 22. LUCENE-1371: Added convenience method TopDocs Searcher.search(Query query, int n). (Mike McCandless) 23. LUCENE-1356: Allow easy extensions of TopDocCollector by turning constructor and fields from package to protected. (Shai Erera via Doron Cohen) 24. LUCENE-1375: Added convenience method IndexCommit.getTimestamp, which is equivalent to getDirectory().fileModified(getSegmentsFileName()). (Mike McCandless) 23. LUCENE-1366: Rename Field.Index options to be more accurate: TOKENIZED becomes ANALYZED; UN_TOKENIZED becomes NOT_ANALYZED; NO_NORMS becomes NOT_ANALYZED_NO_NORMS and a new ANALYZED_NO_NORMS is added. (Mike McCandless) 24. LUCENE-1131: Added numDeletedDocs method to IndexReader (Otis Gospodnetic) Bug fixes 1. LUCENE-1134: Fixed BooleanQuery.rewrite to only optimize a single clause query if minNumShouldMatch<=0. (Shai Erera via Michael Busch) 2. LUCENE-1169: Fixed bug in IndexSearcher.search(): searching with a filter might miss some hits because scorer.skipTo() is called without checking if the scorer is already at the right position. scorer.skipTo(scorer.doc()) is not a NOOP, it behaves as scorer.next(). (Eks Dev, Michael Busch) 3. LUCENE-1182: Added scorePayload to SimilarityDelegator (Andi Vajda via Grant Ingersoll) 4. LUCENE-1213: MultiFieldQueryParser was ignoring slop in case of a single field phrase. (Trejkaz via Doron Cohen) 5. LUCENE-1228: IndexWriter.commit() was not updating the index version and as result IndexReader.reopen() failed to sense index changes. (Doron Cohen) 6. LUCENE-1267: Added numDocs() and maxDoc() to IndexWriter; deprecated docCount(). (Mike McCandless) 7. LUCENE-1274: Added new prepareCommit() method to IndexWriter, which does phase 1 of a 2-phase commit (commit() does phase 2). This is needed when you want to update an index as part of a transaction involving external resources (eg a database). Also deprecated abort(), renaming it to rollback(). (Mike McCandless) 8. LUCENE-1003: Stop RussianAnalyzer from removing numbers. (TUSUR OpenTeam, Dmitry Lihachev via Otis Gospodnetic) 9. LUCENE-1152: SpellChecker fix around clearIndex and indexDictionary methods, plus removal of IndexReader reference. (Naveen Belkale via Otis Gospodnetic) 10. LUCENE-1046: Removed dead code in SpellChecker (Daniel Naber via Otis Gospodnetic) 11. LUCENE-1189: Fixed the QueryParser to handle escaped characters within quoted terms correctly. (Tomer Gabel via Michael Busch) 12. LUCENE-1299: Fixed NPE in SpellChecker when IndexReader is not null and field is (Grant Ingersoll) 13. LUCENE-1303: Fixed BoostingTermQuery's explanation to be marked as a Match depending only upon the non-payload score part, regardless of the effect of the payload on the score. Prior to this, score of a query containing a BTQ differed from its explanation. (Doron Cohen) 14. LUCENE-1310: Fixed SloppyPhraseScorer to work also for terms repeating more than twice in the query. (Doron Cohen) 15. LUCENE-1351: ISOLatin1AccentFilter now cleans additional ligatures (Cedrik Lime via Grant Ingersoll) 16. LUCENE-1383: Workaround a nasty "leak" in Java's builtin ThreadLocal, to prevent Lucene from causing unexpected OutOfMemoryError in certain situations (notably J2EE applications). (Chris Lu via Mike McCandless) New features 1. LUCENE-1137: Added Token.set/getFlags() accessors for passing more information about a Token through the analysis process. The flag is not indexed/stored and is thus only used by analysis. 2. LUCENE-1147: Add -segment option to CheckIndex tool so you can check only a specific segment or segments in your index. (Mike McCandless) 3. LUCENE-1045: Reopened this issue to add support for short and bytes. 4. LUCENE-584: Added new data structures to o.a.l.util, such as OpenBitSet and SortedVIntList. These extend DocIdSet and can directly be used for Filters with the new Filter API. Also changed the core Filters to use OpenBitSet instead of java.util.BitSet. (Paul Elschot, Michael Busch) 5. LUCENE-494: Added QueryAutoStopWordAnalyzer to allow for the automatic removal, from a query of frequently occurring terms. This Analyzer is not intended for use during indexing. (Mark Harwood via Grant Ingersoll) 6. LUCENE-1044: Change Lucene to properly "sync" files after committing, to ensure on a machine or OS crash or power cut, even with cached writes, the index remains consistent. Also added explicit commit() method to IndexWriter to force a commit without having to close. (Mike McCandless) 7. LUCENE-997: Add search timeout (partial) support. A TimeLimitedCollector was added to allow limiting search time. It is a partial solution since timeout is checked only when collecting a hit, and therefore a search for rare words in a huge index might not stop within the specified time. (Sean Timm via Doron Cohen) 8. LUCENE-1184: Allow SnapshotDeletionPolicy to be re-used across close/re-open of IndexWriter while still protecting an open snapshot (Tim Brennan via Mike McCandless) 9. LUCENE-1194: Added IndexWriter.deleteDocuments(Query) to delete documents matching the specified query. Also added static unlock and isLocked methods (deprecating the ones in IndexReader). (Mike McCandless) 10. LUCENE-1201: Add IndexReader.getIndexCommit() method. (Tim Brennan via Mike McCandless) 11. LUCENE-550: Added InstantiatedIndex implementation. Experimental Index store similar to MemoryIndex but allows for multiple documents in memory. (Karl Wettin via Grant Ingersoll) 12. LUCENE-400: Added word based n-gram filter (in contrib/analyzers) called ShingleFilter and an Analyzer wrapper that wraps another Analyzer's token stream with a ShingleFilter (Sebastian Kirsch, Steve Rowe via Grant Ingersoll) 13. LUCENE-1166: Decomposition tokenfilter for languages like German and Swedish (Thomas Peuss via Grant Ingersoll) 14. LUCENE-1187: ChainedFilter and BooleanFilter now work with new Filter API and DocIdSetIterator-based filters. Backwards-compatibility with old BitSet-based filters is ensured. (Paul Elschot via Michael Busch) 15. LUCENE-1295: Added new method to MoreLikeThis for retrieving interesting terms and made retrieveTerms(int) public. (Grant Ingersoll) 16. LUCENE-1298: MoreLikeThis can now accept a custom Similarity (Grant Ingersoll) 17. LUCENE-1297: Allow other string distance measures for the SpellChecker (Thomas Morton via Otis Gospodnetic) 18. LUCENE-1001: Provide access to Payloads via Spans. All existing Span Query implementations in Lucene implement. (Mark Miller, Grant Ingersoll) 19. LUCENE-1354: Provide programmatic access to CheckIndex (Grant Ingersoll, Mike McCandless) 20. LUCENE-1279: Add support for Collators to RangeFilter/Query and Query Parser. (Steve Rowe via Grant Ingersoll) Optimizations 1. LUCENE-705: When building a compound file, use RandomAccessFile.setLength() to tell the OS/filesystem to pre-allocate space for the file. This may improve fragmentation in how the CFS file is stored, and allows us to detect an upcoming disk full situation before actually filling up the disk. (Mike McCandless) 2. LUCENE-1120: Speed up merging of term vectors by bulk-copying the raw bytes for each contiguous range of non-deleted documents. (Mike McCandless) 3. LUCENE-1185: Avoid checking if the TermBuffer 'scratch' in SegmentTermEnum is null for every call of scanTo(). (Christian Kohlschuetter via Michael Busch) 4. LUCENE-1217: Internal to Field.java, use isBinary instead of runtime type checking for possible speedup of binaryValue(). (Eks Dev via Mike McCandless) 5. LUCENE-1183: Optimized TRStringDistance class (in contrib/spell) that uses less memory than the previous version. (Cédrik LIME via Otis Gospodnetic) 6. LUCENE-1195: Improve term lookup performance by adding a LRU cache to the TermInfosReader. In performance experiments the speedup was about 25% on average on mid-size indexes with ~500,000 documents for queries with 3 terms and about 7% on larger indexes with ~4.3M documents. (Michael Busch) Documentation 1. LUCENE-1236: Added some clarifying remarks to EdgeNGram*.java (Hiroaki Kawai via Grant Ingersoll) 2. LUCENE-1157 and LUCENE-1256: HTML changes log, created automatically from CHANGES.txt. This HTML file is currently visible only via developers page. (Steven Rowe via Doron Cohen) 3. LUCENE-1349: Fieldable can now be changed without breaking backward compatibility rules (within reason. See the note at the top of this file and also on Fieldable.java). (Grant Ingersoll) 4. LUCENE-1873: Update documentation to reflect current Contrib area status. (Steven Rowe, Mark Miller) Build 1. LUCENE-1153: Added JUnit JAR to new lib directory. Updated build to rely on local JUnit instead of ANT/lib. 2. LUCENE-1202: Small fixes to the way Clover is used to work better with contribs. Of particular note: a single clover db is used regardless of whether tests are run globally or in the specific contrib directories. 3. LUCENE-1353: Javacc target in contrib/miscellaneous for generating the precedence query parser. Test Cases 1. LUCENE-1238: Fixed intermittent failures of TestTimeLimitedCollector.testTimeoutMultiThreaded. Within this fix, "greedy" flag was added to TimeLimitedCollector, to allow the wrapped collector to collect also the last doc, after allowed-tTime passed. (Doron Cohen) 2. LUCENE-1348: relax TestTimeLimitedCollector to not fail due to timeout exceeded (just because test machine is very busy). ======================= Release 2.3.2 2008-05-05 ======================= Bug fixes 1. LUCENE-1191: On hitting OutOfMemoryError in any index-modifying methods in IndexWriter, do not commit any further changes to the index to prevent risk of possible corruption. (Mike McCandless) 2. LUCENE-1197: Fixed issue whereby IndexWriter would flush by RAM too early when TermVectors were in use. (Mike McCandless) 3. LUCENE-1198: Don't corrupt index if an exception happens inside DocumentsWriter.init (Mike McCandless) 4. LUCENE-1199: Added defensive check for null indexReader before calling close in IndexModifier.close() (Mike McCandless) 5. LUCENE-1200: Fix rare deadlock case in addIndexes* when ConcurrentMergeScheduler is in use (Mike McCandless) 6. LUCENE-1208: Fix deadlock case on hitting an exception while processing a document that had triggered a flush (Mike McCandless) 7. LUCENE-1210: Fix deadlock case on hitting an exception while starting a merge when using ConcurrentMergeScheduler (Mike McCandless) 8. LUCENE-1222: Fix IndexWriter.doAfterFlush to always be called on flush (Mark Ferguson via Mike McCandless) 9. LUCENE-1226: Fixed IndexWriter.addIndexes(IndexReader[]) to commit successfully created compound files. (Michael Busch) 10. LUCENE-1150: Re-expose StandardTokenizer's constants publicly; this was accidentally lost with LUCENE-966. (Nicolas Lalevée via Mike McCandless) 11. LUCENE-1262: Fixed bug in BufferedIndexReader.refill whereby on hitting an exception in readInternal, the buffer is incorrectly filled with stale bytes such that subsequent calls to readByte() return incorrect results. (Trejkaz via Mike McCandless) 12. LUCENE-1270: Fixed intermittent case where IndexWriter.close() would hang after IndexWriter.addIndexesNoOptimize had been called. (Stu Hood via Mike McCandless) Build 1. LUCENE-1230: Include *pom.xml* in source release files. (Michael Busch) ======================= Release 2.3.1 2008-02-22 ======================= Bug fixes 1. LUCENE-1168: Fixed corruption cases when autoCommit=false and documents have mixed term vectors (Suresh Guvvala via Mike McCandless). 2. LUCENE-1171: Fixed some cases where OOM errors could cause deadlock in IndexWriter (Mike McCandless). 3. LUCENE-1173: Fixed corruption case when autoCommit=false and bulk merging of stored fields is used (Yonik via Mike McCandless). 4. LUCENE-1163: Fixed bug in CharArraySet.contains(char[] buffer, int offset, int len) that was ignoring offset and thus giving the wrong answer. (Thomas Peuss via Mike McCandless) 5. LUCENE-1177: Fix rare case where IndexWriter.optimize might do too many merges at the end. (Mike McCandless) 6. LUCENE-1176: Fix corruption case when documents with no term vector fields are added before documents with term vector fields. (Mike McCandless) 7. LUCENE-1179: Fixed assert statement that was incorrectly preventing Fields with empty-string field name from working. (Sergey Kabashnyuk via Mike McCandless) ======================= Release 2.3.0 2008-01-21 ======================= Changes in runtime behavior 1. LUCENE-994: Defaults for IndexWriter have been changed to maximize out-of-the-box indexing speed. First, IndexWriter now flushes by RAM usage (16 MB by default) instead of a fixed doc count (call IndexWriter.setMaxBufferedDocs to get backwards compatible behavior). Second, ConcurrentMergeScheduler is used to run merges using background threads (call IndexWriter.setMergeScheduler(new SerialMergeScheduler()) to get backwards compatible behavior). Third, merges are chosen based on size in bytes of each segment rather than document count of each segment (call IndexWriter.setMergePolicy(new LogDocMergePolicy()) to get backwards compatible behavior). NOTE: users of ParallelReader must change back all of these defaults in order to ensure the docIDs "align" across all parallel indices. (Mike McCandless) 2. LUCENE-1045: SortField.AUTO didn't work with long. When detecting the field type for sorting automatically, numbers used to be interpreted as int, then as float, if parsing the number as an int failed. Now the detection checks for int, then for long, then for float. (Daniel Naber) API Changes 1. LUCENE-843: Added IndexWriter.setRAMBufferSizeMB(...) to have IndexWriter flush whenever the buffered documents are using more than the specified amount of RAM. Also added new APIs to Token that allow one to set a char[] plus offset and length to specify a token (to avoid creating a new String() for each Token). (Mike McCandless) 2. LUCENE-963: Add setters to Field to allow for re-using a single Field instance during indexing. This is a sizable performance gain, especially for small documents. (Mike McCandless) 3. LUCENE-969: Add new APIs to Token, TokenStream and Analyzer to permit re-using of Token and TokenStream instances during indexing. Changed Token to use a char[] as the store for the termText instead of String. This gives faster tokenization performance (~10-15%). (Mike McCandless) 4. LUCENE-847: Factored MergePolicy, which determines which merges should take place and when, as well as MergeScheduler, which determines when the selected merges should actually run, out of IndexWriter. The default merge policy is now LogByteSizeMergePolicy (see LUCENE-845) and the default merge scheduler is now ConcurrentMergeScheduler (see LUCENE-870). (Steven Parkes via Mike McCandless) 5. LUCENE-1052: Add IndexReader.setTermInfosIndexDivisor(int) method that allows you to reduce memory usage of the termInfos by further sub-sampling (over the termIndexInterval that was used during indexing) which terms are loaded into memory. (Chuck Williams, Doug Cutting via Mike McCandless) 6. LUCENE-743: Add IndexReader.reopen() method that re-opens an existing IndexReader (see New features -> 8.) (Michael Busch) 7. LUCENE-1062: Add setData(byte[] data), setData(byte[] data, int offset, int length), getData(), getOffset() and clone() methods to o.a.l.index.Payload. Also add the field name as arg to Similarity.scorePayload(). (Michael Busch) 8. LUCENE-982: Add IndexWriter.optimize(int maxNumSegments) method to "partially optimize" an index down to maxNumSegments segments. (Mike McCandless) 9. LUCENE-1080: Changed Token.DEFAULT_TYPE to be public. 10. LUCENE-1064: Changed TopDocs constructor to be public. (Shai Erera via Michael Busch) 11. LUCENE-1079: DocValues cleanup: constructor now has no params, and getInnerArray() now throws UnsupportedOperationException (Doron Cohen) 12. LUCENE-1089: Added PriorityQueue.insertWithOverflow, which returns the Object (if any) that was bumped from the queue to allow re-use. (Shai Erera via Mike McCandless) 13. LUCENE-1101: Token reuse 'contract' (defined LUCENE-969) modified so it is token producer's responsibility to call Token.clear(). (Doron Cohen) 14. LUCENE-1118: Changed StandardAnalyzer to skip too-long (default > 255 characters) tokens. You can increase this limit by calling StandardAnalyzer.setMaxTokenLength(...). (Michael McCandless) Bug fixes 1. LUCENE-933: QueryParser fixed to not produce empty sub BooleanQueries "()" even if the Analyzer produced no tokens for input. (Doron Cohen) 2. LUCENE-955: Fixed SegmentTermPositions to work correctly with the first term in the dictionary. (Michael Busch) 3. LUCENE-951: Fixed NullPointerException in MultiLevelSkipListReader that was thrown after a call of TermPositions.seek(). (Rich Johnson via Michael Busch) 4. LUCENE-938: Fixed cases where an unhandled exception in IndexWriter's methods could cause deletes to be lost. (Steven Parkes via Mike McCandless) 5. LUCENE-962: Fixed case where an unhandled exception in IndexWriter.addDocument or IndexWriter.updateDocument could cause unreferenced files in the index to not be deleted (Steven Parkes via Mike McCandless) 6. LUCENE-957: RAMDirectory fixed to properly handle directories larger than Integer.MAX_VALUE. (Doron Cohen) 7. LUCENE-781: MultiReader fixed to not throw NPE if isCurrent(), isOptimized() or getVersion() is called. Separated MultiReader into two classes: MultiSegmentReader extends IndexReader, is package-protected and is created automatically by IndexReader.open() in case the index has multiple segments. The public MultiReader now extends MultiSegmentReader and is intended to be used by users who want to add their own subreaders. (Daniel Naber, Michael Busch) 8. LUCENE-970: FilterIndexReader now implements isOptimized(). Before a call of isOptimized() would throw a NPE. (Michael Busch) 9. LUCENE-832: ParallelReader fixed to not throw NPE if isCurrent(), isOptimized() or getVersion() is called. (Michael Busch) 10. LUCENE-948: Fix FNFE exception caused by stale NFS client directory listing caches when writers on different machines are sharing an index over NFS and using a custom deletion policy (Mike McCandless) 11. LUCENE-978: Ensure TermInfosReader, FieldsReader, and FieldsReader close any streams they had opened if an exception is hit in the constructor. (Ning Li via Mike McCandless) 12. LUCENE-985: If an extremely long term is in a doc (> 16383 chars), we now throw an IllegalArgumentException saying the term is too long, instead of cryptic ArrayIndexOutOfBoundsException. (Karl Wettin via Mike McCandless) 13. LUCENE-991: The explain() method of BoostingTermQuery had errors when no payloads were present on a document. (Peter Keegan via Grant Ingersoll) 14. LUCENE-992: Fixed IndexWriter.updateDocument to be atomic again (this was broken by LUCENE-843). (Ning Li via Mike McCandless) 15. LUCENE-1008: Fixed corruption case when document with no term vector fields is added after documents with term vector fields. This bug was introduced with LUCENE-843. (Grant Ingersoll via Mike McCandless) 16. LUCENE-1006: Fixed QueryParser to accept a "" field value (zero length quoted string.) (yonik) 17. LUCENE-1010: Fixed corruption case when document with no term vector fields is added after documents with term vector fields. This case is hit during merge and would cause an EOFException. This bug was introduced with LUCENE-984. (Andi Vajda via Mike McCandless) 19. LUCENE-1009: Fix merge slowdown with LogByteSizeMergePolicy when autoCommit=false and documents are using stored fields and/or term vectors. (Mark Miller via Mike McCandless) 20. LUCENE-1011: Fixed corruption case when two or more machines, sharing an index over NFS, can be writers in quick succession. (Patrick Kimber via Mike McCandless) 21. LUCENE-1028: Fixed Weight serialization for few queries: DisjunctionMaxQuery, ValueSourceQuery, CustomScoreQuery. Serialization check added for all queries. (Kyle Maxwell via Doron Cohen) 22. LUCENE-1048: Fixed incorrect behavior in Lock.obtain(...) when the timeout argument is very large (eg Long.MAX_VALUE). Also added Lock.LOCK_OBTAIN_WAIT_FOREVER constant to never timeout. (Nikolay Diakov via Mike McCandless) 23. LUCENE-1050: Throw LockReleaseFailedException in Simple/NativeFSLockFactory if we fail to delete the lock file when releasing the lock. (Nikolay Diakov via Mike McCandless) 24. LUCENE-1071: Fixed SegmentMerger to correctly set payload bit in the merged segment. (Michael Busch) 25. LUCENE-1042: Remove throwing of IOException in getTermFreqVector(int, String, TermVectorMapper) to be consistent with other getTermFreqVector calls. Also removed the throwing of the other IOException in that method to be consistent. (Karl Wettin via Grant Ingersoll) 26. LUCENE-1096: Fixed Hits behavior when hits' docs are deleted along with iterating the hits. Deleting docs already retrieved now works seamlessly. If docs not yet retrieved are deleted (e.g. from another thread), and then, relying on the initial Hits.length(), an application attempts to retrieve more hits than actually exist , a ConcurrentMidificationException is thrown. (Doron Cohen) 27. LUCENE-1068: Changed StandardTokenizer to fix an issue with it marking the type of some tokens incorrectly. This is done by adding a new flag named replaceInvalidAcronym which defaults to false, the current, incorrect behavior. Setting this flag to true fixes the problem. This flag is a temporary fix and is already marked as being deprecated. 3.x will implement the correct approach. (Shai Erera via Grant Ingersoll) LUCENE-1140: Fixed NPE caused by 1068 (Alexei Dets via Grant Ingersoll) 28. LUCENE-749: ChainedFilter behavior fixed when logic of first filter is ANDNOT. (Antonio Bruno via Doron Cohen) 29. LUCENE-508: Make sure SegmentTermEnum.prev() is accurate (= last term) after next() returns false. (Steven Tamm via Mike McCandless) New features 1. LUCENE-906: Elision filter for French. (Mathieu Lecarme via Otis Gospodnetic) 2. LUCENE-960: Added a SpanQueryFilter and related classes to allow for not only filtering, but knowing where in a Document a Filter matches (Grant Ingersoll) 3. LUCENE-868: Added new Term Vector access features. New callback mechanism allows application to define how and where to read Term Vectors from disk. This implementation contains several extensions of the new abstract TermVectorMapper class. The new API should be back-compatible. No changes in the actual storage of Term Vectors has taken place. 3.1 LUCENE-1038: Added setDocumentNumber() method to TermVectorMapper to provide information about what document is being accessed. (Karl Wettin via Grant Ingersoll) 4. LUCENE-975: Added PositionBasedTermVectorMapper that allows for position based lookup of term vector information. See item #3 above (LUCENE-868). 5. LUCENE-1011: Added simple tools (all in org.apache.lucene.store) to verify that locking is working properly. LockVerifyServer runs a separate server to verify locks. LockStressTest runs a simple tool that rapidly obtains and releases locks. VerifyingLockFactory is a LockFactory that wraps any other LockFactory and consults the LockVerifyServer whenever a lock is obtained or released, throwing an exception if an illegal lock obtain occurred. (Patrick Kimber via Mike McCandless) 6. LUCENE-1015: Added FieldCache extension (ExtendedFieldCache) to support doubles and longs. Added support into SortField for sorting on doubles and longs as well. (Grant Ingersoll) 7. LUCENE-1020: Created basic index checking & repair tool (o.a.l.index.CheckIndex). When run without -fix it does a detailed test of all segments in the index and reports summary information and any errors it hit. With -fix it will remove segments that had errors. (Mike McCandless) 8. LUCENE-743: Add IndexReader.reopen() method that re-opens an existing IndexReader by only loading those portions of an index that have changed since the reader was (re)opened. reopen() can be significantly faster than open(), depending on the amount of index changes. SegmentReader, MultiSegmentReader, MultiReader, and ParallelReader implement reopen(). (Michael Busch) 9. LUCENE-1040: CharArraySet useful for efficiently checking set membership of text specified by char[]. (yonik) 10. LUCENE-1073: Created SnapshotDeletionPolicy to facilitate taking a live backup of an index without pausing indexing. (Mike McCandless) 11. LUCENE-1019: CustomScoreQuery enhanced to support multiple ValueSource queries. (Kyle Maxwell via Doron Cohen) 12. LUCENE-1095: Added an option to StopFilter to increase positionIncrement of the token succeeding a stopped token. Disabled by default. Similar option added to QueryParser to consider token positions when creating PhraseQuery and MultiPhraseQuery. Disabled by default (so by default the query parser ignores position increments). (Doron Cohen) 13. LUCENE-1380: Added TokenFilter for setting position increment in special cases related to the ShingleFilter (Mck SembWever, Steve Rowe, Karl Wettin via Grant Ingersoll) Optimizations 1. LUCENE-937: CachingTokenFilter now uses an iterator to access the Tokens that are cached in the LinkedList. This increases performance significantly, especially when the number of Tokens is large. (Mark Miller via Michael Busch) 2. LUCENE-843: Substantial optimizations to improve how IndexWriter uses RAM for buffering documents and to speed up indexing (2X-8X faster). A single shared hash table now records the in-memory postings per unique term and is directly flushed into a single segment. (Mike McCandless) 3. LUCENE-892: Fixed extra "buffer to buffer copy" that sometimes takes place when using compound files. (Mike McCandless) 4. LUCENE-959: Remove synchronization in Document (yonik) 5. LUCENE-963: Add setters to Field to allow for re-using a single Field instance during indexing. This is a sizable performance gain, especially for small documents. (Mike McCandless) 6. LUCENE-939: Check explicitly for boundary conditions in FieldInfos and don't rely on exceptions. (Michael Busch) 7. LUCENE-966: Very substantial speedups (~6X faster) for StandardTokenizer (StandardAnalyzer) by using JFlex instead of JavaCC to generate the tokenizer. (Stanislaw Osinski via Mike McCandless) 8. LUCENE-969: Changed core tokenizers & filters to re-use Token and TokenStream instances when possible to improve tokenization performance (~10-15%). (Mike McCandless) 9. LUCENE-871: Speedup ISOLatin1AccentFilter (Ian Boston via Mike McCandless) 10. LUCENE-986: Refactored SegmentInfos from IndexReader into the new subclass DirectoryIndexReader. SegmentReader and MultiSegmentReader now extend DirectoryIndexReader and are the only IndexReader implementations that use SegmentInfos to access an index and acquire a write lock for index modifications. (Michael Busch) 11. LUCENE-1007: Allow flushing in IndexWriter to be triggered by either RAM usage or document count or both (whichever comes first), by adding symbolic constant DISABLE_AUTO_FLUSH to disable one of the flush triggers. (Ning Li via Mike McCandless) 12. LUCENE-1043: Speed up merging of stored fields by bulk-copying the raw bytes for each contiguous range of non-deleted documents. (Robert Engels via Mike McCandless) 13. LUCENE-693: Speed up nested conjunctions (~2x) that match many documents, and a slight performance increase for top level conjunctions. (yonik) 14. LUCENE-1098: Make inner class StandardAnalyzer.SavedStreams static and final. (Nathan Beyer via Michael Busch) Documentation 1. LUCENE-1051: Generate separate javadocs for core, demo and contrib classes, as well as an unified view. Also add an appropriate menu structure to the website. (Michael Busch) 2. LUCENE-746: Fix error message in AnalyzingQueryParser.getPrefixQuery. (Ronnie Kolehmainen via Michael Busch) Build 1. LUCENE-908: Improvements and simplifications for how the MANIFEST file and the META-INF dir are created. (Michael Busch) 2. LUCENE-935: Various improvements for the maven artifacts. Now the artifacts also include the sources as .jar files. (Michael Busch) 3. Added apply-patch target to top-level build. Defaults to looking for a patch in ${basedir}/../patches with name specified by -Dpatch.name. Can also specify any location by -Dpatch.file property on the command line. This should be helpful for easy application of patches, but it is also a step towards integrating automatic patch application with JIRA and Hudson, and is thus subject to change. (Grant Ingersoll) 4. LUCENE-935: Defined property "m2.repository.url" to allow setting the url to a maven remote repository to deploy to. (Michael Busch) 5. LUCENE-1051: Include javadocs in the maven artifacts. (Michael Busch) 6. LUCENE-1055: Remove gdata-server from build files and its sources from trunk. (Michael Busch) 7. LUCENE-935: Allow to deploy maven artifacts to a remote m2 repository via scp and ssh authentication. (Michael Busch) 8. LUCENE-1123: Allow overriding the specification version for MANIFEST.MF (Michael Busch) Test Cases 1. LUCENE-766: Test adding two fields with the same name but different term vector setting. (Nicolas Lalevée via Doron Cohen) ======================= Release 2.2.0 2007-06-19 ======================= Changes in runtime behavior API Changes 1. LUCENE-793: created new exceptions and added them to throws clause for many methods (all subclasses of IOException for backwards compatibility): index.StaleReaderException, index.CorruptIndexException, store.LockObtainFailedException. This was done to better call out the possible root causes of an IOException from these methods. (Mike McCandless) 2. LUCENE-811: make SegmentInfos class, plus a few methods from related classes, package-private again (they were unnecessarily made public as part of LUCENE-701). (Mike McCandless) 3. LUCENE-710: added optional autoCommit boolean to IndexWriter constructors. When this is false, index changes are not committed until the writer is closed. This gives explicit control over when a reader will see the changes. Also added optional custom deletion policy to explicitly control when prior commits are removed from the index. This is intended to allow applications to share an index over NFS by customizing when prior commits are deleted. (Mike McCandless) 4. LUCENE-818: changed most public methods of IndexWriter, IndexReader (and its subclasses), FieldsReader and RAMDirectory to throw AlreadyClosedException if they are accessed after being closed. (Mike McCandless) 5. LUCENE-834: Changed some access levels for certain Span classes to allow them to be overridden. They have been marked expert only and not for public consumption. (Grant Ingersoll) 6. LUCENE-796: Removed calls to super.* from various get*Query methods in MultiFieldQueryParser, in order to allow sub-classes to override them. (Steven Parkes via Otis Gospodnetic) 7. LUCENE-857: Removed caching from QueryFilter and deprecated QueryFilter in favour of QueryWrapperFilter or QueryWrapperFilter + CachingWrapperFilter combination when caching is desired. (Chris Hostetter, Otis Gospodnetic) 8. LUCENE-869: Changed FSIndexInput and FSIndexOutput to inner classes of FSDirectory to enable extensibility of these classes. (Michael Busch) 9. LUCENE-580: Added the public method reset() to TokenStream. This method does nothing by default, but may be overwritten by subclasses to support consuming the TokenStream more than once. (Michael Busch) 10. LUCENE-580: Added a new constructor to Field that takes a TokenStream as argument, available as tokenStreamValue(). This is useful to avoid the need of "dummy analyzers" for pre-analyzed fields. (Karl Wettin, Michael Busch) 11. LUCENE-730: Added the new methods to BooleanQuery setAllowDocsOutOfOrder() and getAllowDocsOutOfOrder(). Deprecated the methods setUseScorer14() and getUseScorer14(). The optimization patch LUCENE-730 (see Optimizations->3.) improves performance for certain queries but results in scoring out of docid order. This patch reverse this change, so now by default hit docs are scored in docid order if not setAllowDocsOutOfOrder(true) is explicitly called. This patch also enables the tests in QueryUtils again that check for docid order. (Paul Elschot, Doron Cohen, Michael Busch) 12. LUCENE-888: Added Directory.openInput(File path, int bufferSize) to optionally specify the size of the read buffer. Also added BufferedIndexInput.setBufferSize(int) to change the buffer size. (Mike McCandless) 13. LUCENE-923: Make SegmentTermPositionVector package-private. It does not need to be public because it implements the public interface TermPositionVector. (Michael Busch) Bug fixes 1. LUCENE-804: Fixed build.xml to pack a fully compilable src dist. (Doron Cohen) 2. LUCENE-813: Leading wildcard fixed to work with trailing wildcard. Query parser modified to create a prefix query only for the case that there is a single trailing wildcard (and no additional wildcard or '?' in the query text). (Doron Cohen) 3. LUCENE-812: Add no-argument constructors to NativeFSLockFactory and SimpleFSLockFactory. This enables all 4 builtin LockFactory implementations to be specified via the System property org.apache.lucene.store.FSDirectoryLockFactoryClass. (Mike McCandless) 4. LUCENE-821: The new single-norm-file introduced by LUCENE-756 failed to reduce the number of open descriptors since it was still opened once per field with norms. (yonik) 5. LUCENE-823: Make sure internal file handles are closed when hitting an exception (eg disk full) while flushing deletes in IndexWriter's mergeSegments, and also during IndexWriter.addIndexes. (Mike McCandless) 6. LUCENE-825: If directory is removed after FSDirectory.getDirectory() but before IndexReader.open you now get a FileNotFoundException like Lucene pre-2.1 (before this fix you got an NPE). (Mike McCandless) 7. LUCENE-800: Removed backslash from the TERM_CHAR list in the queryparser, because the backslash is the escape character. Also changed the ESCAPED_CHAR list to contain all possible characters, because every character that follows a backslash should be considered as escaped. (Michael Busch) 8. LUCENE-372: QueryParser.parse() now ensures that the entire input string is consumed. Now a ParseException is thrown if a query contains too many closing parentheses. (Andreas Neumann via Michael Busch) 9. LUCENE-814: javacc build targets now fix line-end-style of generated files. Now also deleting all javacc generated files before calling javacc. (Steven Parkes, Doron Cohen) 10. LUCENE-829: close readers in contrib/benchmark. (Karl Wettin, Doron Cohen) 11. LUCENE-828: Minor fix for Term's equal(). (Paul Cowan via Otis Gospodnetic) 12. LUCENE-846: Fixed: if IndexWriter is opened with autoCommit=false, and you call addIndexes, and hit an exception (eg disk full) then when IndexWriter rolls back its internal state this could corrupt the instance of IndexWriter (but, not the index itself) by referencing already deleted segments. This bug was only present in 2.2 (trunk), ie was never released. (Mike McCandless) 13. LUCENE-736: Sloppy phrase query with repeating terms matches wrong docs. For example query "B C B"~2 matches the doc "A B C D E". (Doron Cohen) 14. LUCENE-789: Fixed: custom similarity is ignored when using MultiSearcher (problem reported by Alexey Lef). Now the similarity applied by MultiSearcer.setSimilarity(sim) is being used. Note that as before this fix, creating a multiSearcher from Searchers for whom custom similarity was set has no effect - it is masked by the similarity of the MultiSearcher. This is as designed, because MultiSearcher operates on Searchables (not Searchers). (Doron Cohen) 15. LUCENE-880: Fixed DocumentWriter to close the TokenStreams after it has written the postings. Then the resources associated with the TokenStreams can safely be released. (Michael Busch) 16. LUCENE-883: consecutive calls to Spellchecker.indexDictionary() won't insert terms twice anymore. (Daniel Naber) 17. LUCENE-881: QueryParser.escape() now also escapes the characters '|' and '&' which are part of the queryparser syntax. (Michael Busch) 18. LUCENE-886: Spellchecker clean up: exceptions aren't printed to STDERR anymore and ignored, but re-thrown. Some javadoc improvements. (Daniel Naber) 19. LUCENE-698: FilteredQuery now takes the query boost into account for scoring. (Michael Busch) 20. LUCENE-763: Spellchecker: LuceneDictionary used to skip first word in enumeration. (Christian Mallwitz via Daniel Naber) 21. LUCENE-903: FilteredQuery explanation inaccuracy with boost. Explanation tests now "deep" check the explanation details. (Chris Hostetter, Doron Cohen) 22. LUCENE-912: DisjunctionMaxScorer first skipTo(target) call ignores the skip target param and ends up at the first match. (Sudaakeran B. via Chris Hostetter & Doron Cohen) 23. LUCENE-913: Two consecutive score() calls return different scores for Boolean Queries. (Michael Busch, Doron Cohen) 24. LUCENE-1013: Fix IndexWriter.setMaxMergeDocs to work "out of the box", again, by moving set/getMaxMergeDocs up from LogDocMergePolicy into LogMergePolicy. This fixes the API breakage (non backwards compatible change) caused by LUCENE-994. (Yonik Seeley via Mike McCandless) New features 1. LUCENE-759: Added two n-gram-producing TokenFilters. (Otis Gospodnetic) 2. LUCENE-822: Added FieldSelector capabilities to Searchable for use with RemoteSearcher, and other Searchable implementations. (Mark Miller, Grant Ingersoll) 3. LUCENE-755: Added the ability to store arbitrary binary metadata in the posting list. These metadata are called Payloads. For every position of a Token one Payload in the form of a variable length byte array can be stored in the prox file. Remark: The APIs introduced with this feature are in experimental state and thus contain appropriate warnings in the javadocs. (Michael Busch) 4. LUCENE-834: Added BoostingTermQuery which can boost scores based on the values of a payload (see #3 above.) (Grant Ingersoll) 5. LUCENE-834: Similarity has a new method for scoring payloads called scorePayloads that can be overridden to take advantage of payload storage (see #3 above) 6. LUCENE-834: Added isPayloadAvailable() onto TermPositions interface and implemented it in the appropriate places (Grant Ingersoll) 7. LUCENE-853: Added RemoteCachingWrapperFilter to enable caching of Filters on the remote side of the RMI connection. (Matt Ericson via Otis Gospodnetic) 8. LUCENE-446: Added Solr's search.function for scores based on field values, plus CustomScoreQuery for simple score (post) customization. (Yonik Seeley, Doron Cohen) 9. LUCENE-1058: Added new TeeTokenFilter (like the UNIX 'tee' command) and SinkTokenizer which can be used to share tokens between two or more Fields such that the other Fields do not have to go through the whole Analysis process over again. For instance, if you have two Fields that share all the same analysis steps except one lowercases tokens and the other does not, you can coordinate the operations between the two using the TeeTokenFilter and the SinkTokenizer. See TeeSinkTokenTest.java for examples. (Grant Ingersoll, Michael Busch, Yonik Seeley) Optimizations 1. LUCENE-761: The proxStream is now cloned lazily in SegmentTermPositions when nextPosition() is called for the first time. This allows using instances of SegmentTermPositions instead of SegmentTermDocs without additional costs. (Michael Busch) 2. LUCENE-431: RAMInputStream and RAMOutputStream extend IndexInput and IndexOutput directly now. This avoids further buffering and thus avoids unnecessary array copies. (Michael Busch) 3. LUCENE-730: Updated BooleanScorer2 to make use of BooleanScorer in some cases and possibly improve scoring performance. Documents can now be delivered out-of-order as they are scored (e.g. to HitCollector). N.B. A bit of code had to be disabled in QueryUtils in order for TestBoolean2 test to keep passing. (Paul Elschot via Otis Gospodnetic) 4. LUCENE-882: Spellchecker doesn't store the ngrams anymore but only indexes them to keep the spell index small. (Daniel Naber) 5. LUCENE-430: Delay allocation of the buffer after a clone of BufferedIndexInput. Together with LUCENE-888 this will allow to adjust the buffer size dynamically. (Paul Elschot, Michael Busch) 6. LUCENE-888: Increase buffer sizes inside CompoundFileWriter and BufferedIndexOutput. Also increase buffer size in BufferedIndexInput, but only when used during merging. Together, these increases yield 10-18% overall performance gain vs the previous 1K defaults. (Mike McCandless) 7. LUCENE-866: Adds multi-level skip lists to the posting lists. This speeds up most queries that use skipTo(), especially on big indexes with large posting lists. For average AND queries the speedup is about 20%, for queries that contain very frequent and very unique terms the speedup can be over 80%. (Michael Busch) Documentation 1. LUCENE 791 && INFRA-1173: Infrastructure moved the Wiki to http://wiki.apache.org/lucene-java/ Updated the links in the docs and wherever else I found references. (Grant Ingersoll, Joe Schaefer) 2. LUCENE-807: Fixed the javadoc for ScoreDocComparator.compare() to be consistent with java.util.Comparator.compare(): Any integer is allowed to be returned instead of only -1/0/1. (Paul Cowan via Michael Busch) 3. LUCENE-875: Solved javadoc warnings & errors under jdk1.4. Solved javadoc errors under jdk5 (jars in path for gdata). Made "javadocs" target depend on "build-contrib" for first downloading contrib jars configured for dynamic downloaded. (Note: when running behind firewall, a firewall prompt might pop up) (Doron Cohen) 4. LUCENE-740: Added SNOWBALL-LICENSE.txt to the snowball package and a remark about the license to NOTICE.TXT. (Steven Parkes via Michael Busch) 5. LUCENE-925: Added analysis package javadocs. (Grant Ingersoll and Doron Cohen) 6. LUCENE-926: Added document package javadocs. (Grant Ingersoll) Build 1. LUCENE-802: Added LICENSE.TXT and NOTICE.TXT to Lucene jars. (Steven Parkes via Michael Busch) 2. LUCENE-885: "ant test" now includes all contrib tests. The new "ant test-core" target can be used to run only the Core (non contrib) tests. (Chris Hostetter) 3. LUCENE-900: "ant test" now enables Java assertions (in Lucene packages). (Doron Cohen) 4. LUCENE-894: Add custom build file for binary distributions that includes targets to build the demos. (Chris Hostetter, Michael Busch) 5. LUCENE-904: The "package" targets in build.xml now also generate .md5 checksum files. (Chris Hostetter, Michael Busch) 6. LUCENE-907: Include LICENSE.TXT and NOTICE.TXT in the META-INF dirs of demo war, demo jar, and the contrib jars. (Michael Busch) 7. LUCENE-909: Demo targets for running the demo. (Doron Cohen) 8. LUCENE-908: Improves content of MANIFEST file and makes it customizable for the contribs. Adds SNOWBALL-LICENSE.txt to META-INF of the snowball jar and makes sure that the lucli jar contains LICENSE.txt and NOTICE.txt. (Chris Hostetter, Michael Busch) 9. LUCENE-930: Various contrib building improvements to ensure contrib dependencies are met, and test compilation errors fail the build. (Steven Parkes, Chris Hostetter) 10. LUCENE-622: Add ant target and pom.xml files for building maven artifacts of the Lucene core and the contrib modules. (Sami Siren, Karl Wettin, Michael Busch) ======================= Release 2.1.0 2007-02-14 ======================= Changes in runtime behavior 1. 's' and 't' have been removed from the list of default stopwords in StopAnalyzer (also used in by StandardAnalyzer). Having e.g. 's' as a stopword meant that 's-class' led to the same results as 'class'. Note that this problem still exists for 'a', e.g. in 'a-class' as 'a' continues to be a stopword. (Daniel Naber) 2. LUCENE-478: Updated the list of Unicode code point ranges for CJK (now split into CJ and K) in StandardAnalyzer. (John Wang and Steven Rowe via Otis Gospodnetic) 3. Modified some CJK Unicode code point ranges in StandardTokenizer.jj, and added a few more of them to increase CJK character coverage. Also documented some of the ranges. (Otis Gospodnetic) 4. LUCENE-489: Add support for leading wildcard characters (*, ?) to QueryParser. Default is to disallow them, as before. (Steven Parkes via Otis Gospodnetic) 5. LUCENE-703: QueryParser changed to default to use of ConstantScoreRangeQuery for range queries. Added useOldRangeQuery property to QueryParser to allow selection of old RangeQuery class if required. (Mark Harwood) 6. LUCENE-543: WildcardQuery now performs a TermQuery if the provided term does not contain a wildcard character (? or *), when previously a StringIndexOutOfBoundsException was thrown. (Michael Busch via Erik Hatcher) 7. LUCENE-726: Removed the use of deprecated doc.fields() method and Enumeration. (Michael Busch via Otis Gospodnetic) 8. LUCENE-436: Removed finalize() in TermInfosReader and SegmentReader, and added a call to enumerators.remove() in TermInfosReader.close(). The finalize() overrides were added to help with a pre-1.4.2 JVM bug that has since been fixed, plus we no longer support pre-1.4.2 JVMs. (Otis Gospodnetic) 9. LUCENE-771: The default location of the write lock is now the index directory, and is named simply "write.lock" (without a big digest prefix). The system properties "org.apache.lucene.lockDir" nor "java.io.tmpdir" are no longer used as the global directory for storing lock files, and the LOCK_DIR field of FSDirectory is now deprecated. (Mike McCandless) New features 1. LUCENE-503: New ThaiAnalyzer and ThaiWordFilter in contrib/analyzers (Samphan Raruenrom via Chris Hostetter) 2. LUCENE-545: New FieldSelector API and associated changes to IndexReader and implementations. New Fieldable interface for use with the lazy field loading mechanism. (Grant Ingersoll and Chuck Williams via Grant Ingersoll) 3. LUCENE-676: Move Solr's PrefixFilter to Lucene core. (Yura Smolsky, Yonik Seeley) 4. LUCENE-678: Added NativeFSLockFactory, which implements locking using OS native locking (via java.nio.*). (Michael McCandless via Yonik Seeley) 5. LUCENE-544: Added the ability to specify different boosts for different fields when using MultiFieldQueryParser (Matt Ericson via Otis Gospodnetic) 6. LUCENE-528: New IndexWriter.addIndexesNoOptimize() that doesn't optimize the index when adding new segments, only performing merges as needed. (Ning Li via Yonik Seeley) 7. LUCENE-573: QueryParser now allows backslash escaping in quoted terms and phrases. (Michael Busch via Yonik Seeley) 8. LUCENE-716: QueryParser now allows specification of Unicode characters in terms via a unicode escape of the form \uXXXX (Michael Busch via Yonik Seeley) 9. LUCENE-709: Added RAMDirectory.sizeInBytes(), IndexWriter.ramSizeInBytes() and IndexWriter.flushRamSegments(), allowing applications to control the amount of memory used to buffer documents. (Chuck Williams via Yonik Seeley) 10. LUCENE-723: QueryParser now parses *:* as MatchAllDocsQuery (Yonik Seeley) 11. LUCENE-741: Command-line utility for modifying or removing norms on fields in an existing index. This is mostly based on LUCENE-496 and lives in contrib/miscellaneous. (Chris Hostetter, Otis Gospodnetic) 12. LUCENE-759: Added NGramTokenizer and EdgeNGramTokenizer classes and their passing unit tests. (Otis Gospodnetic) 13. LUCENE-565: Added methods to IndexWriter to more efficiently handle updating documents (the "delete then add" use case). This is intended to be an eventual replacement for the existing IndexModifier. Added IndexWriter.flush() (renamed from flushRamSegments()) to flush all pending updates (held in RAM), to the Directory. (Ning Li via Mike McCandless) 14. LUCENE-762: Added in SIZE and SIZE_AND_BREAK FieldSelectorResult options which allow one to retrieve the size of a field without retrieving the actual field. (Chuck Williams via Grant Ingersoll) 15. LUCENE-799: Properly handle lazy, compressed fields. (Mike Klaas via Grant Ingersoll) API Changes 1. LUCENE-438: Remove "final" from Token, implement Cloneable, allow changing of termText via setTermText(). (Yonik Seeley) 2. org.apache.lucene.analysis.nl.WordlistLoader has been deprecated and is supposed to be replaced with the WordlistLoader class in package org.apache.lucene.analysis (Daniel Naber) 3. LUCENE-609: Revert return type of Document.getField(s) to Field for backward compatibility, added new Document.getFieldable(s) for access to new lazy loaded fields. (Yonik Seeley) 4. LUCENE-608: Document.fields() has been deprecated and a new method Document.getFields() has been added that returns a List instead of an Enumeration (Daniel Naber) 5. LUCENE-605: New Explanation.isMatch() method and new ComplexExplanation subclass allows explain methods to produce Explanations which model "matching" independent of having a positive value. (Chris Hostetter) 6. LUCENE-621: New static methods IndexWriter.setDefaultWriteLockTimeout and IndexWriter.setDefaultCommitLockTimeout for overriding default timeout values for all future instances of IndexWriter (as well as for any other classes that may reference the static values, ie: IndexReader). (Michael McCandless via Chris Hostetter) 7. LUCENE-638: FSDirectory.list() now only returns the directory's Lucene-related files. Thanks to this change one can now construct a RAMDirectory from a file system directory that contains files not related to Lucene. (Simon Willnauer via Daniel Naber) 8. LUCENE-635: Decoupling locking implementation from Directory implementation. Added set/getLockFactory to Directory and moved all locking code into subclasses of abstract class LockFactory. FSDirectory and RAMDirectory still default to their prior locking implementations, but now you can mix & match, for example using SingleInstanceLockFactory (ie, in memory locking) locking with an FSDirectory. Note that now you must call setDisableLocks before the instantiation a FSDirectory if you wish to disable locking for that Directory. (Michael McCandless, Jeff Patterson via Yonik Seeley) 9. LUCENE-657: Made FuzzyQuery non-final and inner ScoreTerm protected. (Steven Parkes via Otis Gospodnetic) 10. LUCENE-701: Lockless commits: a commit lock is no longer required when a writer commits and a reader opens the index. This includes a change to the index file format (see docs/fileformats.html for details). It also removes all APIs associated with the commit lock & its timeout. Readers are now truly read-only and do not block one another on startup. This is the first step to getting Lucene to work correctly over NFS (second step is LUCENE-710). (Mike McCandless) 11. LUCENE-722: DEFAULT_MIN_DOC_FREQ was misspelled DEFALT_MIN_DOC_FREQ in Similarity's MoreLikeThis class. The misspelling has been replaced by the correct spelling. (Andi Vajda via Daniel Naber) 12. LUCENE-738: Reduce the size of the file that keeps track of which documents are deleted when the number of deleted documents is small. This changes the index file format and cannot be read by previous versions of Lucene. (Doron Cohen via Yonik Seeley) 13. LUCENE-756: Maintain all norms in a single .nrm file to reduce the number of open files and file descriptors for the non-compound index format. This changes the index file format, but maintains the ability to read and update older indices. The first segment merge on an older format index will create a single .nrm file for the new segment. (Doron Cohen via Yonik Seeley) 14. LUCENE-732: DateTools support has been added to QueryParser, with setters for both the default Resolution, and per-field Resolution. For backwards compatibility, DateField is still used if no Resolutions are specified. (Michael Busch via Chris Hostetter) 15. Added isOptimized() method to IndexReader. (Otis Gospodnetic) 16. LUCENE-773: Deprecate the FSDirectory.getDirectory(*) methods that take a boolean "create" argument. Instead you should use IndexWriter's "create" argument to create a new index. (Mike McCandless) 17. LUCENE-780: Add a static Directory.copy() method to copy files from one Directory to another. (Jiri Kuhn via Mike McCandless) 18. LUCENE-773: Added Directory.clearLock(String name) to forcefully remove an old lock. The default implementation is to ask the lockFactory (if non null) to clear the lock. (Mike McCandless) 19. LUCENE-795: Directory.renameFile() has been deprecated as it is not used anymore inside Lucene. (Daniel Naber) Bug fixes 1. Fixed the web application demo (built with "ant war-demo") which didn't work because it used a QueryParser method that had been removed (Daniel Naber) 2. LUCENE-583: ISOLatin1AccentFilter fails to preserve positionIncrement (Yonik Seeley) 3. LUCENE-575: SpellChecker min score is incorrectly changed by suggestSimilar (Karl Wettin via Yonik Seeley) 4. LUCENE-587: Explanation.toHtml was producing malformed HTML (Chris Hostetter) 5. Fix to allow MatchAllDocsQuery to be used with RemoteSearcher (Yonik Seeley) 6. LUCENE-601: RAMDirectory and RAMFile made Serializable (Karl Wettin via Otis Gospodnetic) 7. LUCENE-557: Fixes to BooleanQuery and FilteredQuery so that the score Explanations match up with the real scores. (Chris Hostetter) 8. LUCENE-607: ParallelReader's TermEnum fails to advance properly to new fields (Chuck Williams, Christian Kohlschuetter via Yonik Seeley) 9. LUCENE-610,LUCENE-611: Simple syntax changes to allow compilation with ecj: disambiguate inner class scorer's use of doc() in BooleanScorer2, other test code changes. (DM Smith via Yonik Seeley) 10. LUCENE-451: All core query types now use ComplexExplanations so that boosts of zero don't confuse the BooleanWeight explain method. (Chris Hostetter) 11. LUCENE-593: Fixed LuceneDictionary's inner Iterator (Kåre Fiedler Christiansen via Otis Gospodnetic) 12. LUCENE-641: fixed an off-by-one bug with IndexWriter.setMaxFieldLength() (Daniel Naber) 13. LUCENE-659: Make PerFieldAnalyzerWrapper delegate getPositionIncrementGap() to the correct analyzer for the field. (Chuck Williams via Yonik Seeley) 14. LUCENE-650: Fixed NPE in Locale specific String Sort when Document has no value. (Oliver Hutchison via Chris Hostetter) 15. LUCENE-683: Fixed data corruption when reading lazy loaded fields. (Yonik Seeley) 16. LUCENE-678: Fixed bug in NativeFSLockFactory which caused the same lock to be shared between different directories. (Michael McCandless via Yonik Seeley) 17. LUCENE-690: Fixed thread unsafe use of IndexInput by lazy loaded fields. (Yonik Seeley) 18. LUCENE-696: Fix bug when scorer for DisjunctionMaxQuery has skipTo() called on it before next(). (Yonik Seeley) 19. LUCENE-569: Fixed SpanNearQuery bug, for 'inOrder' queries it would fail to recognize ordered spans if they overlapped with unordered spans. (Paul Elschot via Chris Hostetter) 20. LUCENE-706: Updated fileformats.xml|html concerning the docdelta value in the frequency file. (Johan Stuyts, Doron Cohen via Grant Ingersoll) 21. LUCENE-715: Fixed private constructor in IndexWriter.java to properly release the acquired write lock if there is an IOException after acquiring the write lock but before finishing instantiation. (Matthew Bogosian via Mike McCandless) 22. LUCENE-651: Multiple different threads requesting the same FieldCache entry (often for Sorting by a field) at the same time caused multiple generations of that entry, which was detrimental to performance and memory use. (Oliver Hutchison via Otis Gospodnetic) 23. LUCENE-717: Fixed build.xml not to fail when there is no lib dir. (Doron Cohen via Otis Gospodnetic) 24. LUCENE-728: Removed duplicate/old MoreLikeThis and SimilarityQueries classes from contrib/similarity, as their new home is under contrib/queries. (Otis Gospodnetic) 25. LUCENE-669: Do not double-close the RandomAccessFile in FSIndexInput/Output during finalize(). Besides sending an IOException up to the GC, this may also be the cause intermittent "The handle is invalid" IOExceptions on Windows when trying to close readers or writers. (Michael Busch via Mike McCandless) 26. LUCENE-702: Fix IndexWriter.addIndexes(*) to not corrupt the index on any exceptions (eg disk full). The semantics of these methods is now transactional: either all indices are merged or none are. Also fixed IndexWriter.mergeSegments (called outside of addIndexes(*) by addDocument, optimize, flushRamSegments) and IndexReader.commit() (called by close) to clean up and keep the instance state consistent to what's actually in the index (Mike McCandless). 27. LUCENE-129: Change finalizers to do "try {...} finally {super.finalize();}" to make sure we don't miss finalizers in classes above us. (Esmond Pitt via Mike McCandless) 28. LUCENE-754: Fix a problem introduced by LUCENE-651, causing IndexReaders to hang around forever, in addition to not fixing the original FieldCache performance problem. (Chris Hostetter, Yonik Seeley) 29. LUCENE-140: Fix IndexReader.deleteDocument(int docNum) to correctly raise ArrayIndexOutOfBoundsException when docNum is too large. Previously, if docNum was only slightly too large (within the same multiple of 8, ie, up to 7 ints beyond maxDoc), no exception would be raised and instead the index would become silently corrupted. The corruption then only appears much later, in mergeSegments, when the corrupted segment is merged with segment(s) after it. (Mike McCandless) 30. LUCENE-768: Fix case where an Exception during deleteDocument, undeleteAll or setNorm in IndexReader could leave the reader in a state where close() fails to release the write lock. (Mike McCandless) 31. Remove "tvp" from known index file extensions because it is never used. (Nicolas Lalevée via Bernhard Messer) 32. LUCENE-767: Change how SegmentReader.maxDoc() is computed to not rely on file length check and instead use the SegmentInfo's docCount that's already stored explicitly in the index. This is a defensive bug fix (ie, there is no known problem seen "in real life" due to this, just a possible future problem). (Chuck Williams via Mike McCandless) Optimizations 1. LUCENE-586: TermDocs.skipTo() is now more efficient for multi-segment indexes. This will improve the performance of many types of queries against a non-optimized index. (Andrew Hudson via Yonik Seeley) 2. LUCENE-623: RAMDirectory.close now nulls out its reference to all internal "files", allowing them to be GCed even if references to the RAMDirectory itself still exist. (Nadav Har'El via Chris Hostetter) 3. LUCENE-629: Compressed fields are no longer uncompressed and recompressed during segment merges (e.g. during indexing or optimizing), thus improving performance . (Michael Busch via Otis Gospodnetic) 4. LUCENE-388: Improve indexing performance when maxBufferedDocs is large by keeping a count of buffered documents rather than counting after each document addition. (Doron Cohen, Paul Smith, Yonik Seeley) 5. Modified TermScorer.explain to use TermDocs.skipTo() instead of looping through docs. (Grant Ingersoll) 6. LUCENE-672: New indexing segment merge policy flushes all buffered docs to their own segment and delays a merge until mergeFactor segments of a certain level have been accumulated. This increases indexing performance in the presence of deleted docs or partially full segments as well as enabling future optimizations. NOTE: this also fixes an "under-merging" bug whereby it is possible to get far too many segments in your index (which will drastically slow down search, risks exhausting file descriptor limit, etc.). This can happen when the number of buffered docs at close, plus the number of docs in the last non-ram segment is greater than mergeFactor. (Ning Li, Yonik Seeley) 7. Lazy loaded fields unnecessarily retained an extra copy of loaded String data. (Yonik Seeley) 8. LUCENE-443: ConjunctionScorer performance increase. Speed up any BooleanQuery with more than one mandatory clause. (Abdul Chaudhry, Paul Elschot via Yonik Seeley) 9. LUCENE-365: DisjunctionSumScorer performance increase of ~30%. Speeds up queries with optional clauses. (Paul Elschot via Yonik Seeley) 10. LUCENE-695: Optimized BufferedIndexInput.readBytes() for medium size buffers, which will speed up merging and retrieving binary and compressed fields. (Nadav Har'El via Yonik Seeley) 11. LUCENE-687: Lazy skipping on proximity file speeds up most queries involving term positions, including phrase queries. (Michael Busch via Yonik Seeley) 12. LUCENE-714: Replaced 2 cases of manual for-loop array copying with calls to System.arraycopy instead, in DocumentWriter.java. (Nicolas Lalevee via Mike McCandless) 13. LUCENE-729: Non-recursive skipTo and next implementation of TermDocs for a MultiReader. The old implementation could recurse up to the number of segments in the index. (Yonik Seeley) 14. LUCENE-739: Improve segment merging performance by reusing the norm array across different fields and doing bulk writes of norms of segments with no deleted docs. (Michael Busch via Yonik Seeley) 15. LUCENE-745: Add BooleanQuery.clauses(), allowing direct access to the List of clauses and replaced the internal synchronized Vector with an unsynchronized List. (Yonik Seeley) 16. LUCENE-750: Remove finalizers from FSIndexOutput and move the FSIndexInput finalizer to the actual file so all clones don't register a new finalizer. (Yonik Seeley) Test Cases 1. Added TestTermScorer.java (Grant Ingersoll) 2. Added TestWindowsMMap.java (Benson Margulies via Mike McCandless) 3. LUCENE-744 Append the user.name property onto the temporary directory that is created so it doesn't interfere with other users. (Grant Ingersoll) Documentation 1. Added style sheet to xdocs named lucene.css and included in the Anakia VSL descriptor. (Grant Ingersoll) 2. Added scoring.xml document into xdocs. Updated Similarity.java scoring formula.(Grant Ingersoll and Steve Rowe. Updates from: Michael McCandless, Doron Cohen, Chris Hostetter, Doug Cutting). Issue 664. 3. Added javadocs for FieldSelectorResult.java. (Grant Ingersoll) 4. Moved xdocs directory to src/site/src/documentation/content/xdocs per Issue 707. Site now builds using Forrest, just like the other Lucene siblings. See http://wiki.apache.org/jakarta-lucene/HowToUpdateTheWebsite for info on updating the website. (Grant Ingersoll with help from Steve Rowe, Chris Hostetter, Doug Cutting, Otis Gospodnetic, Yonik Seeley) 5. Added in Developer and System Requirements sections under Resources (Grant Ingersoll) 6. LUCENE-713 Updated the Term Vector section of File Formats to include documentation on how Offset and Position info are stored in the TVF file. (Grant Ingersoll, Samir Abdou) 7. Added in link to Clover Test Code Coverage Reports under the Develop section in Resources (Grant Ingersoll) 8. LUCENE-748: Added details for semantics of IndexWriter.close on hitting an Exception. (Jed Wesley-Smith via Mike McCandless) 9. Added some text about what is contained in releases. (Eric Haszlakiewicz via Grant Ingersoll) 10. LUCENE-758: Fix javadoc to clarify that RAMDirectory(Directory) makes a full copy of the starting Directory. (Mike McCandless) 11. LUCENE-764: Fix javadocs to detail temporary space requirements for IndexWriter's optimize(), addIndexes(*) and addDocument(...) methods. (Mike McCandless) Build 1. Added in clover test code coverage per http://issues.apache.org/jira/browse/LUCENE-721 To enable clover code coverage, you must have clover.jar in the ANT classpath and specify -Drun.clover=true on the command line. (Michael Busch and Grant Ingersoll) 2. Added a sysproperty in common-build.xml per Lucene 752 to map java.io.tmpdir to ${build.dir}/test just like the tempDir sysproperty. 3. LUCENE-757 Added new target named init-dist that does setup for distribution of both binary and source distributions. Called by package and package-*-src ======================= Release 2.0.0 2006-05-26 ======================= API Changes 1. All deprecated methods and fields have been removed, except DateField, which will still be supported for some time so Lucene can read its date fields from old indexes (Yonik Seeley & Grant Ingersoll) 2. DisjunctionSumScorer is no longer public. (Paul Elschot via Otis Gospodnetic) 3. Creating a Field with both an empty name and an empty value now throws an IllegalArgumentException (Daniel Naber) 4. LUCENE-301: Added new IndexWriter({String,File,Directory}, Analyzer) constructors that do not take a boolean "create" argument. These new constructors will create a new index if necessary, else append to the existing one. (Dan Armbrust via Mike McCandless) New features 1. LUCENE-496: Command line tool for modifying the field norms of an existing index; added to contrib/miscellaneous. (Chris Hostetter) 2. LUCENE-577: SweetSpotSimilarity added to contrib/miscellaneous. (Chris Hostetter) Bug fixes 1. LUCENE-330: Fix issue of FilteredQuery not working properly within BooleanQuery. (Paul Elschot via Erik Hatcher) 2. LUCENE-515: Make ConstantScoreRangeQuery and ConstantScoreQuery work with RemoteSearchable. (Philippe Laflamme via Yonik Seeley) 3. Added methods to get/set writeLockTimeout and commitLockTimeout in IndexWriter. These could be set in Lucene 1.4 using a system property. This feature had been removed without adding the corresponding getter/setter methods. (Daniel Naber) 4. LUCENE-413: Fixed ArrayIndexOutOfBoundsException exceptions when using SpanQueries. (Paul Elschot via Yonik Seeley) 5. Implemented FilterIndexReader.getVersion() and isCurrent() (Yonik Seeley) 6. LUCENE-540: Fixed a bug with IndexWriter.addIndexes(Directory[]) that sometimes caused the index order of documents to change. (Yonik Seeley) 7. LUCENE-526: Fixed a bug in FieldSortedHitQueue that caused subsequent String sorts with different locales to sort identically. (Paul Cowan via Yonik Seeley) 8. LUCENE-541: Add missing extractTerms() to DisjunctionMaxQuery (Stefan Will via Yonik Seeley) 9. LUCENE-514: Added getTermArrays() and extractTerms() to MultiPhraseQuery (Eric Jain & Yonik Seeley) 10. LUCENE-512: Fixed ClassCastException in ParallelReader.getTermFreqVectors (frederic via Yonik) 11. LUCENE-352: Fixed bug in SpanNotQuery that manifested as NullPointerException when "exclude" query was not a SpanTermQuery. (Chris Hostetter) 12. LUCENE-572: Fixed bug in SpanNotQuery hashCode, was ignoring exclude clause (Chris Hostetter) 13. LUCENE-561: Fixed some ParallelReader bugs. NullPointerException if the reader didn't know about the field yet, reader didn't keep track if it had deletions, and deleteDocument calls could circumvent synchronization on the subreaders. (Chuck Williams via Yonik Seeley) 14. LUCENE-556: Added empty extractTerms() implementation to MatchAllDocsQuery and ConstantScoreQuery in order to allow their use with a MultiSearcher. (Yonik Seeley) 15. LUCENE-546: Removed 2GB file size limitations for RAMDirectory. (Peter Royal, Michael Chan, Yonik Seeley) 16. LUCENE-485: Don't hold commit lock while removing obsolete index files. (Luc Vanlerberghe via cutting) 1.9.1 Bug fixes 1. LUCENE-511: Fix a bug in the BufferedIndexOutput optimization introduced in 1.9-final. (Shay Banon & Steven Tamm via cutting) 1.9 final Note that this release is mostly but not 100% source compatible with the previous release of Lucene (1.4.3). In other words, you should make sure your application compiles with this version of Lucene before you replace the old Lucene JAR with the new one. Many methods have been deprecated in anticipation of release 2.0, so deprecation warnings are to be expected when upgrading from 1.4.3 to 1.9. Bug fixes 1. The fix that made IndexWriter.setMaxBufferedDocs(1) work had negative effects on indexing performance and has thus been reverted. The argument for setMaxBufferedDocs(int) must now at least be 2, otherwise an exception is thrown. (Daniel Naber) Optimizations 1. Optimized BufferedIndexOutput.writeBytes() to use System.arraycopy() in more cases, rather than copying byte-by-byte. (Lukas Zapletal via Cutting) 1.9 RC1 Requirements 1. To compile and use Lucene you now need Java 1.4 or later. Changes in runtime behavior 1. FuzzyQuery can no longer throw a TooManyClauses exception. If a FuzzyQuery expands to more than BooleanQuery.maxClauseCount terms only the BooleanQuery.maxClauseCount most similar terms go into the rewritten query and thus the exception is avoided. (Christoph) 2. Changed system property from "org.apache.lucene.lockdir" to "org.apache.lucene.lockDir", so that its casing follows the existing pattern used in other Lucene system properties. (Bernhard) 3. The terms of RangeQueries and FuzzyQueries are now converted to lowercase by default (as it has been the case for PrefixQueries and WildcardQueries before). Use setLowercaseExpandedTerms(false) to disable that behavior but note that this also affects PrefixQueries and WildcardQueries. (Daniel Naber) 4. Document frequency that is computed when MultiSearcher is used is now computed correctly and "globally" across subsearchers and indices, while before it used to be computed locally to each index, which caused ranking across multiple indices not to be equivalent. (Chuck Williams, Wolf Siberski via Otis, bug #31841) 5. When opening an IndexWriter with create=true, Lucene now only deletes its own files from the index directory (looking at the file name suffixes to decide if a file belongs to Lucene). The old behavior was to delete all files. (Daniel Naber and Bernhard Messer, bug #34695) 6. The version of an IndexReader, as returned by getCurrentVersion() and getVersion() doesn't start at 0 anymore for new indexes. Instead, it is now initialized by the system time in milliseconds. (Bernhard Messer via Daniel Naber) 7. Several default values cannot be set via system properties anymore, as this has been considered inappropriate for a library like Lucene. For most properties there are set/get methods available in IndexWriter which you should use instead. This affects the following properties: See IndexWriter for getter/setter methods: org.apache.lucene.writeLockTimeout, org.apache.lucene.commitLockTimeout, org.apache.lucene.minMergeDocs, org.apache.lucene.maxMergeDocs, org.apache.lucene.maxFieldLength, org.apache.lucene.termIndexInterval, org.apache.lucene.mergeFactor, See BooleanQuery for getter/setter methods: org.apache.lucene.maxClauseCount See FSDirectory for getter/setter methods: disableLuceneLocks (Daniel Naber) 8. Fixed FieldCacheImpl to use user-provided IntParser and FloatParser, instead of using Integer and Float classes for parsing. (Yonik Seeley via Otis Gospodnetic) 9. Expert level search routines returning TopDocs and TopFieldDocs no longer normalize scores. This also fixes bugs related to MultiSearchers and score sorting/normalization. (Luc Vanlerberghe via Yonik Seeley, LUCENE-469) New features 1. Added support for stored compressed fields (patch #31149) (Bernhard Messer via Christoph) 2. Added support for binary stored fields (patch #29370) (Drew Farris and Bernhard Messer via Christoph) 3. Added support for position and offset information in term vectors (patch #18927). (Grant Ingersoll & Christoph) 4. A new class DateTools has been added. It allows you to format dates in a readable format adequate for indexing. Unlike the existing DateField class DateTools can cope with dates before 1970 and it forces you to specify the desired date resolution (e.g. month, day, second, ...) which can make RangeQuerys on those fields more efficient. (Daniel Naber) 5. QueryParser now correctly works with Analyzers that can return more than one token per position. For example, a query "+fast +car" would be parsed as "+fast +(car automobile)" if the Analyzer returns "car" and "automobile" at the same position whenever it finds "car" (Patch #23307). (Pierrick Brihaye, Daniel Naber) 6. Permit unbuffered Directory implementations (e.g., using mmap). InputStream is replaced by the new classes IndexInput and BufferedIndexInput. OutputStream is replaced by the new classes IndexOutput and BufferedIndexOutput. InputStream and OutputStream are now deprecated and FSDirectory is now subclassable. (cutting) 7. Add native Directory and TermDocs implementations that work under GCJ. These require GCC 3.4.0 or later and have only been tested on Linux. Use 'ant gcj' to build demo applications. (cutting) 8. Add MMapDirectory, which uses nio to mmap input files. This is still somewhat slower than FSDirectory. However it uses less memory per query term, since a new buffer is not allocated per term, which may help applications which use, e.g., wildcard queries. It may also someday be faster. (cutting & Paul Elschot) 9. Added javadocs-internal to build.xml - bug #30360 (Paul Elschot via Otis) 10. Added RangeFilter, a more generically useful filter than DateFilter. (Chris M Hostetter via Erik) 11. Added NumberTools, a utility class indexing numeric fields. (adapted from code contributed by Matt Quail; committed by Erik) 12. Added public static IndexReader.main(String[] args) method. IndexReader can now be used directly at command line level to list and optionally extract the individual files from an existing compound index file. (adapted from code contributed by Garrett Rooney; committed by Bernhard) 13. Add IndexWriter.setTermIndexInterval() method. See javadocs. (Doug Cutting) 14. Added LucenePackage, whose static get() method returns java.util.Package, which lets the caller get the Lucene version information specified in the Lucene Jar. (Doug Cutting via Otis) 15. Added Hits.iterator() method and corresponding HitIterator and Hit objects. This provides standard java.util.Iterator iteration over Hits. Each call to the iterator's next() method returns a Hit object. (Jeremy Rayner via Erik) 16. Add ParallelReader, an IndexReader that combines separate indexes over different fields into a single virtual index. (Doug Cutting) 17. Add IntParser and FloatParser interfaces to FieldCache, so that fields in arbitrarily formats can be cached as ints and floats. (Doug Cutting) 18. Added class org.apache.lucene.index.IndexModifier which combines IndexWriter and IndexReader, so you can add and delete documents without worrying about synchronization/locking issues. (Daniel Naber) 19. Lucene can now be used inside an unsigned applet, as Lucene's access to system properties will not cause a SecurityException anymore. (Jon Schuster via Daniel Naber, bug #34359) 20. Added a new class MatchAllDocsQuery that matches all documents. (John Wang via Daniel Naber, bug #34946) 21. Added ability to omit norms on a per field basis to decrease index size and memory consumption when there are many indexed fields. See Field.setOmitNorms() (Yonik Seeley, LUCENE-448) 22. Added NullFragmenter to contrib/highlighter, which is useful for highlighting entire documents or fields. (Erik Hatcher) 23. Added regular expression queries, RegexQuery and SpanRegexQuery. Note the same term enumeration caveats apply with these queries as apply to WildcardQuery and other term expanding queries. These two new queries are not currently supported via QueryParser. (Erik Hatcher) 24. Added ConstantScoreQuery which wraps a filter and produces a score equal to the query boost for every matching document. (Yonik Seeley, LUCENE-383) 25. Added ConstantScoreRangeQuery which produces a constant score for every document in the range. One advantage over a normal RangeQuery is that it doesn't expand to a BooleanQuery and thus doesn't have a maximum number of terms the range can cover. Both endpoints may also be open. (Yonik Seeley, LUCENE-383) 26. Added ability to specify a minimum number of optional clauses that must match in a BooleanQuery. See BooleanQuery.setMinimumNumberShouldMatch(). (Paul Elschot, Chris Hostetter via Yonik Seeley, LUCENE-395) 27. Added DisjunctionMaxQuery which provides the maximum score across its clauses. It's very useful for searching across multiple fields. (Chuck Williams via Yonik Seeley, LUCENE-323) 28. New class ISOLatin1AccentFilter that replaces accented characters in the ISO Latin 1 character set by their unaccented equivalent. (Sven Duzont via Erik Hatcher) 29. New class KeywordAnalyzer. "Tokenizes" the entire stream as a single token. This is useful for data like zip codes, ids, and some product names. (Erik Hatcher) 30. Copied LengthFilter from contrib area to core. Removes words that are too long and too short from the stream. (David Spencer via Otis and Daniel) 31. Added getPositionIncrementGap(String fieldName) to Analyzer. This allows custom analyzers to put gaps between Field instances with the same field name, preventing phrase or span queries crossing these boundaries. The default implementation issues a gap of 0, allowing the default token position increment of 1 to put the next field's first token into a successive position. (Erik Hatcher, with advice from Yonik) 32. StopFilter can now ignore case when checking for stop words. (Grant Ingersoll via Yonik, LUCENE-248) 33. Add TopDocCollector and TopFieldDocCollector. These simplify the implementation of hit collectors that collect only the top-scoring or top-sorting hits. API Changes 1. Several methods and fields have been deprecated. The API documentation contains information about the recommended replacements. It is planned that most of the deprecated methods and fields will be removed in Lucene 2.0. (Daniel Naber) 2. The Russian and the German analyzers have been moved to contrib/analyzers. Also, the WordlistLoader class has been moved one level up in the hierarchy and is now org.apache.lucene.analysis.WordlistLoader (Daniel Naber) 3. The API contained methods that declared to throw an IOException but that never did this. These declarations have been removed. If your code tries to catch these exceptions you might need to remove those catch clauses to avoid compile errors. (Daniel Naber) 4. Add a serializable Parameter Class to standardize parameter enum classes in BooleanClause and Field. (Christoph) 5. Added rewrite methods to all SpanQuery subclasses that nest other SpanQuerys. This allows custom SpanQuery subclasses that rewrite (for term expansion, for example) to nest within the built-in SpanQuery classes successfully. Bug fixes 1. The JSP demo page (src/jsp/results.jsp) now properly closes the IndexSearcher it opens. (Daniel Naber) 2. Fixed a bug in IndexWriter.addIndexes(IndexReader[] readers) that prevented deletion of obsolete segments. (Christoph Goller) 3. Fix in FieldInfos to avoid the return of an extra blank field in IndexReader.getFieldNames() (Patch #19058). (Mark Harwood via Bernhard) 4. Some combinations of BooleanQuery and MultiPhraseQuery (formerly PhrasePrefixQuery) could provoke UnsupportedOperationException (bug #33161). (Rhett Sutphin via Daniel Naber) 5. Small bug in skipTo of ConjunctionScorer that caused NullPointerException if skipTo() was called without prior call to next() fixed. (Christoph) 6. Disable Similiarty.coord() in the scoring of most automatically generated boolean queries. The coord() score factor is appropriate when clauses are independently specified by a user, but is usually not appropriate when clauses are generated automatically, e.g., by a fuzzy, wildcard or range query. Matches on such automatically generated queries are no longer penalized for not matching all terms. (Doug Cutting, Patch #33472) 7. Getting a lock file with Lock.obtain(long) was supposed to wait for a given amount of milliseconds, but this didn't work. (John Wang via Daniel Naber, Bug #33799) 8. Fix FSDirectory.createOutput() to always create new files. Previously, existing files were overwritten, and an index could be corrupted when the old version of a file was longer than the new. Now any existing file is first removed. (Doug Cutting) 9. Fix BooleanQuery containing nested SpanTermQuery's, which previously could return an incorrect number of hits. (Reece Wilton via Erik Hatcher, Bug #35157) 10. Fix NullPointerException that could occur with a MultiPhraseQuery inside a BooleanQuery. (Hans Hjelm and Scotty Allen via Daniel Naber, Bug #35626) 11. Fixed SnowballFilter to pass through the position increment from the original token. (Yonik Seeley via Erik Hatcher, LUCENE-437) 12. Added Unicode range of Korean characters to StandardTokenizer, grouping contiguous characters into a token rather than one token per character. This change also changes the token type to "" for Chinese and Japanese character tokens (previously it was ""). (Cheolgoo Kang via Otis and Erik, LUCENE-444 and LUCENE-461) 13. FieldsReader now looks at FieldInfo.storeOffsetWithTermVector and FieldInfo.storePositionWithTermVector and creates the Field with correct TermVector parameter. (Frank Steinmann via Bernhard, LUCENE-455) 14. Fixed WildcardQuery to prevent "cat" matching "ca??". (Xiaozheng Ma via Bernhard, LUCENE-306) 15. Fixed a bug where MultiSearcher and ParallelMultiSearcher could change the sort order when sorting by string for documents without a value for the sort field. (Luc Vanlerberghe via Yonik, LUCENE-453) 16. Fixed a sorting problem with MultiSearchers that can lead to missing or duplicate docs due to equal docs sorting in an arbitrary order. (Yonik Seeley, LUCENE-456) 17. A single hit using the expert level sorted search methods resulted in the score not being normalized. (Yonik Seeley, LUCENE-462) 18. Fixed inefficient memory usage when loading an index into RAMDirectory. (Volodymyr Bychkoviak via Bernhard, LUCENE-475) 19. Corrected term offsets returned by ChineseTokenizer. (Ray Tsang via Erik Hatcher, LUCENE-324) 20. Fixed MultiReader.undeleteAll() to correctly update numDocs. (Robert Kirchgessner via Doug Cutting, LUCENE-479) 21. Race condition in IndexReader.getCurrentVersion() and isCurrent() fixed by acquiring the commit lock. (Luc Vanlerberghe via Yonik Seeley, LUCENE-481) 22. IndexWriter.setMaxBufferedDocs(1) didn't have the expected effect, this has now been fixed. (Daniel Naber) 23. Fixed QueryParser when called with a date in local form like "[1/16/2000 TO 1/18/2000]". This query did not include the documents of 1/18/2000, i.e. the last day was not included. (Daniel Naber) 24. Removed sorting constraint that threw an exception if there were not yet any values for the sort field (Yonik Seeley, LUCENE-374) Optimizations 1. Disk usage (peak requirements during indexing and optimization) in case of compound file format has been improved. (Bernhard, Dmitry, and Christoph) 2. Optimize the performance of certain uses of BooleanScorer, TermScorer and IndexSearcher. In particular, a BooleanQuery composed of TermQuery, with not all terms required, that returns a TopDocs (e.g., through a Hits with no Sort specified) runs much faster. (cutting) 3. Removed synchronization from reading of term vectors with an IndexReader (Patch #30736). (Bernhard Messer via Christoph) 4. Optimize term-dictionary lookup to allocate far fewer terms when scanning for the matching term. This speeds searches involving low-frequency terms, where the cost of dictionary lookup can be significant. (cutting) 5. Optimize fuzzy queries so the standard fuzzy queries with a prefix of 0 now run 20-50% faster (Patch #31882). (Jonathan Hager via Daniel Naber) 6. A Version of BooleanScorer (BooleanScorer2) added that delivers documents in increasing order and implements skipTo. For queries with required or forbidden clauses it may be faster than the old BooleanScorer, for BooleanQueries consisting only of optional clauses it is probably slower. The new BooleanScorer is now the default. (Patch 31785 by Paul Elschot via Christoph) 7. Use uncached access to norms when merging to reduce RAM usage. (Bug #32847). (Doug Cutting) 8. Don't read term index when random-access is not required. This reduces time to open IndexReaders and they use less memory when random access is not required, e.g., when merging segments. The term index is now read into memory lazily at the first random-access. (Doug Cutting) 9. Optimize IndexWriter.addIndexes(Directory[]) when the number of added indexes is larger than mergeFactor. Previously this could result in quadratic performance. Now performance is n log(n). (Doug Cutting) 10. Speed up the creation of TermEnum for indices with multiple segments and deleted documents, and thus speed up PrefixQuery, RangeQuery, WildcardQuery, FuzzyQuery, RangeFilter, DateFilter, and sorting the first time on a field. (Yonik Seeley, LUCENE-454) 11. Optimized and generalized 32 bit floating point to byte (custom 8 bit floating point) conversions. Increased the speed of Similarity.encodeNorm() anywhere from 10% to 250%, depending on the JVM. (Yonik Seeley, LUCENE-467) Infrastructure 1. Lucene's source code repository has converted from CVS to Subversion. The new repository is at http://svn.apache.org/repos/asf/lucene/java/trunk 2. Lucene's issue tracker has migrated from Bugzilla to JIRA. Lucene's JIRA is at http://issues.apache.org/jira/browse/LUCENE The old issues are still available at http://issues.apache.org/bugzilla/show_bug.cgi?id=xxxx (use the bug number instead of xxxx) 1.4.3 1. The JSP demo page (src/jsp/results.jsp) now properly escapes error messages which might contain user input (e.g. error messages about query parsing). If you used that page as a starting point for your own code please make sure your code also properly escapes HTML characters from user input in order to avoid so-called cross site scripting attacks. (Daniel Naber) 2. QueryParser changes in 1.4.2 broke the QueryParser API. Now the old API is supported again. (Christoph) 1.4.2 1. Fixed bug #31241: Sorting could lead to incorrect results (documents missing, others duplicated) if the sort keys were not unique and there were more than 100 matches. (Daniel Naber) 2. Memory leak in Sort code (bug #31240) eliminated. (Rafal Krzewski via Christoph and Daniel) 3. FuzzyQuery now takes an additional parameter that specifies the minimum similarity that is required for a term to match the query. The QueryParser syntax for this is term~x, where x is a floating point number >= 0 and < 1 (a bigger number means that a higher similarity is required). Furthermore, a prefix can be specified for FuzzyQuerys so that only those terms are considered similar that start with this prefix. This can speed up FuzzyQuery greatly. (Daniel Naber, Christoph Goller) 4. PhraseQuery and PhrasePrefixQuery now allow the explicit specification of relative positions. (Christoph Goller) 5. QueryParser changes: Fix for ArrayIndexOutOfBoundsExceptions (patch #9110); some unused method parameters removed; The ability to specify a minimum similarity for FuzzyQuery has been added. (Christoph Goller) 6. IndexSearcher optimization: a new ScoreDoc is no longer allocated for every non-zero-scoring hit. This makes 'OR' queries that contain common terms substantially faster. (cutting) 1.4.1 1. Fixed a performance bug in hit sorting code, where values were not correctly cached. (Aviran via cutting) 2. Fixed errors in file format documentation. (Daniel Naber) 1.4 final 1. Added "an" to the list of stop words in StopAnalyzer, to complement the existing "a" there. Fix for bug 28960 (http://issues.apache.org/bugzilla/show_bug.cgi?id=28960). (Otis) 2. Added new class FieldCache to manage in-memory caches of field term values. (Tim Jones) 3. Added overloaded getFieldQuery method to QueryParser which accepts the slop factor specified for the phrase (or the default phrase slop for the QueryParser instance). This allows overriding methods to replace a PhraseQuery with a SpanNearQuery instead, keeping the proper slop factor. (Erik Hatcher) 4. Changed the encoding of GermanAnalyzer.java and GermanStemmer.java to UTF-8 and changed the build encoding to UTF-8, to make changed files compile. (Otis Gospodnetic) 5. Removed synchronization from term lookup under IndexReader methods termFreq(), termDocs() or termPositions() to improve multi-threaded performance. (cutting) 6. Fix a bug where obsolete segment files were not deleted on Win32. 1.4 RC3 1. Fixed several search bugs introduced by the skipTo() changes in release 1.4RC1. The index file format was changed a bit, so collections must be re-indexed to take advantage of the skipTo() optimizations. (Christoph Goller) 2. Added new Document methods, removeField() and removeFields(). (Christoph Goller) 3. Fixed inconsistencies with index closing. Indexes and directories are now only closed automatically by Lucene when Lucene opened them automatically. (Christoph Goller) 4. Added new class: FilteredQuery. (Tim Jones) 5. Added a new SortField type for custom comparators. (Tim Jones) 6. Lock obtain timed out message now displays the full path to the lock file. (Daniel Naber via Erik) 7. Fixed a bug in SpanNearQuery when ordered. (Paul Elschot via cutting) 8. Fixed so that FSDirectory's locks still work when the java.io.tmpdir system property is null. (cutting) 9. Changed FilteredTermEnum's constructor to take no parameters, as the parameters were ignored anyway (bug #28858) 1.4 RC2 1. GermanAnalyzer now throws an exception if the stopword file cannot be found (bug #27987). It now uses LowerCaseFilter (bug #18410) (Daniel Naber via Otis, Erik) 2. Fixed a few bugs in the file format documentation. (cutting) 1.4 RC1 1. Changed the format of the .tis file, so that: - it has a format version number, which makes it easier to back-compatibly change file formats in the future. - the term count is now stored as a long. This was the one aspect of the Lucene's file formats which limited index size. - a few internal index parameters are now stored in the index, so that they can (in theory) now be changed from index to index, although there is not yet an API to do so. These changes are back compatible. The new code can read old indexes. But old code will not be able read new indexes. (cutting) 2. Added an optimized implementation of TermDocs.skipTo(). A skip table is now stored for each term in the .frq file. This only adds a percent or two to overall index size, but can substantially speedup many searches. (cutting) 3. Restructured the Scorer API and all Scorer implementations to take advantage of an optimized TermDocs.skipTo() implementation. In particular, PhraseQuerys and conjunctive BooleanQuerys are faster when one clause has substantially fewer matches than the others. (A conjunctive BooleanQuery is a BooleanQuery where all clauses are required.) (cutting) 4. Added new class ParallelMultiSearcher. Combined with RemoteSearchable this makes it easy to implement distributed search systems. (Jean-Francois Halleux via cutting) 5. Added support for hit sorting. Results may now be sorted by any indexed field. For details see the javadoc for Searcher#search(Query, Sort). (Tim Jones via Cutting) 6. Changed FSDirectory to auto-create a full directory tree that it needs by using mkdirs() instead of mkdir(). (Mladen Turk via Otis) 7. Added a new span-based query API. This implements, among other things, nested phrases. See javadocs for details. (Doug Cutting) 8. Added new method Query.getSimilarity(Searcher), and changed scorers to use it. This permits one to subclass a Query class so that it can specify its own Similarity implementation, perhaps one that delegates through that of the Searcher. (Julien Nioche via Cutting) 9. Added MultiReader, an IndexReader that combines multiple other IndexReaders. (Cutting) 10. Added support for term vectors. See Field#isTermVectorStored(). (Grant Ingersoll, Cutting & Dmitry) 11. Fixed the old bug with escaping of special characters in query strings: http://issues.apache.org/bugzilla/show_bug.cgi?id=24665 (Jean-Francois Halleux via Otis) 12. Added support for overriding default values for the following, using system properties: - default commit lock timeout - default maxFieldLength - default maxMergeDocs - default mergeFactor - default minMergeDocs - default write lock timeout (Otis) 13. Changed QueryParser.jj to allow '-' and '+' within tokens: http://issues.apache.org/bugzilla/show_bug.cgi?id=27491 (Morus Walter via Otis) 14. Changed so that the compound index format is used by default. This makes indexing a bit slower, but vastly reduces the chances of file handle problems. (Cutting) 1.3 final 1. Added catch of BooleanQuery$TooManyClauses in QueryParser to throw ParseException instead. (Erik Hatcher) 2. Fixed a NullPointerException in Query.explain(). (Doug Cutting) 3. Added a new method IndexReader.setNorm(), that permits one to alter the boosting of fields after an index is created. 4. Distinguish between the final position and length when indexing a field. The length is now defined as the total number of tokens, instead of the final position, as it was previously. Length is used for score normalization (Similarity.lengthNorm()) and for controlling memory usage (IndexWriter.maxFieldLength). In both of these cases, the total number of tokens is a better value to use than the final token position. Position is used in phrase searching (see PhraseQuery and Token.setPositionIncrement()). 5. Fix StandardTokenizer's handling of CJK characters (Chinese, Japanese and Korean ideograms). Previously contiguous sequences were combined in a single token, which is not very useful. Now each ideogram generates a separate token, which is more useful. 1.3 RC3 1. Added minMergeDocs in IndexWriter. This can be raised to speed indexing without altering the number of files, but only using more memory. (Julien Nioche via Otis) 2. Fix bug #24786, in query rewriting. (bschneeman via Cutting) 3. Fix bug #16952, in demo HTML parser, skip comments in javascript. (Christoph Goller) 4. Fix bug #19253, in demo HTML parser, add whitespace as needed to output (Daniel Naber via Christoph Goller) 5. Fix bug #24301, in demo HTML parser, long titles no longer hang things. (Christoph Goller) 6. Fix bug #23534, Replace use of file timestamp of segments file with an index version number stored in the segments file. This resolves problems when running on file systems with low-resolution timestamps, e.g., HFS under MacOS X. (Christoph Goller) 7. Fix QueryParser so that TokenMgrError is not thrown, only ParseException. (Erik Hatcher) 8. Fix some bugs introduced by change 11 of RC2. (Christoph Goller) 9. Fixed a problem compiling TestRussianStem. (Christoph Goller) 10. Cleaned up some build stuff. (Erik Hatcher) 1.3 RC2 1. Added getFieldNames(boolean) to IndexReader, SegmentReader, and SegmentsReader. (Julien Nioche via otis) 2. Changed file locking to place lock files in System.getProperty("java.io.tmpdir"), where all users are permitted to write files. This way folks can open and correctly lock indexes which are read-only to them. 3. IndexWriter: added a new method, addDocument(Document, Analyzer), permitting one to easily use different analyzers for different documents in the same index. 4. Minor enhancements to FuzzyTermEnum. (Christoph Goller via Otis) 5. PriorityQueue: added insert(Object) method and adjusted IndexSearcher and MultiIndexSearcher to use it. (Christoph Goller via Otis) 6. Fixed a bug in IndexWriter that returned incorrect docCount(). (Christoph Goller via Otis) 7. Fixed SegmentsReader to eliminate the confusing and slightly different behaviour of TermEnum when dealing with an enumeration of all terms, versus an enumeration starting from a specific term. This patch also fixes incorrect term document frequencies when the same term is present in multiple segments. (Christoph Goller via Otis) 8. Added CachingWrapperFilter and PerFieldAnalyzerWrapper. (Erik Hatcher) 9. Added support for the new "compound file" index format (Dmitry Serebrennikov) 10. Added Locale setting to QueryParser, for use by date range parsing. 11. Changed IndexReader so that it can be subclassed by classes outside of its package. Previously it had package-private abstract methods. Also modified the index merging code so that it can work on an arbitrary IndexReader implementation, and added a new method, IndexWriter.addIndexes(IndexReader[]), to take advantage of this. (cutting) 12. Added a limit to the number of clauses which may be added to a BooleanQuery. The default limit is 1024 clauses. This should stop most OutOfMemoryExceptions by prefix, wildcard and fuzzy queries which run amok. (cutting) 13. Add new method: IndexReader.undeleteAll(). This undeletes all deleted documents which still remain in the index. (cutting) 1.3 RC1 1. Fixed PriorityQueue's clear() method. Fix for bug 9454, http://nagoya.apache.org/bugzilla/show_bug.cgi?id=9454 (Matthijs Bomhoff via otis) 2. Changed StandardTokenizer.jj grammar for EMAIL tokens. Fix for bug 9015, http://nagoya.apache.org/bugzilla/show_bug.cgi?id=9015 (Dale Anson via otis) 3. Added the ability to disable lock creation by using disableLuceneLocks system property. This is useful for read-only media, such as CD-ROMs. (otis) 4. Added id method to Hits to be able to access the index global id. Required for sorting options. (carlson) 5. Added support for new range query syntax to QueryParser.jj. (briangoetz) 6. Added the ability to retrieve HTML documents' META tag values to HTMLParser.jj. (Mark Harwood via otis) 7. Modified QueryParser to make it possible to programmatically specify the default Boolean operator (OR or AND). (Péter Halácsy via otis) 8. Made many search methods and classes non-final, per requests. This includes IndexWriter and IndexSearcher, among others. (cutting) 9. Added class RemoteSearchable, providing support for remote searching via RMI. The test class RemoteSearchableTest.java provides an example of how this can be used. (cutting) 10. Added PhrasePrefixQuery (and supporting MultipleTermPositions). The test class TestPhrasePrefixQuery provides the usage example. (Anders Nielsen via otis) 11. Changed the German stemming algorithm to ignore case while stripping. The new algorithm is faster and produces more equal stems from nouns and verbs derived from the same word. (gschwarz) 12. Added support for boosting the score of documents and fields via the new methods Document.setBoost(float) and Field.setBoost(float). Note: This changes the encoding of an indexed value. Indexes should be re-created from scratch in order for search scores to be correct. With the new code and an old index, searches will yield very large scores for shorter fields, and very small scores for longer fields. Once the index is re-created, scores will be as before. (cutting) 13. Added new method Token.setPositionIncrement(). This permits, for the purpose of phrase searching, placing multiple terms in a single position. This is useful with stemmers that produce multiple possible stems for a word. This also permits the introduction of gaps between terms, so that terms which are adjacent in a token stream will not be matched by and exact phrase query. This makes it possible, e.g., to build an analyzer where phrases are not matched over stop words which have been removed. Finally, repeating a token with an increment of zero can also be used to boost scores of matches on that token. (cutting) 14. Added new Filter class, QueryFilter. This constrains search results to only match those which also match a provided query. Results are cached, so that searches after the first on the same index using this filter are very fast. This could be used, for example, with a RangeQuery on a formatted date field to implement date filtering. One could re-use a single QueryFilter that matches, e.g., only documents modified within the last week. The QueryFilter and RangeQuery would only need to be reconstructed once per day. (cutting) 15. Added a new IndexWriter method, getAnalyzer(). This returns the analyzer used when adding documents to this index. (cutting) 16. Fixed a bug with IndexReader.lastModified(). Before, document deletion did not update this. Now it does. (cutting) 17. Added Russian Analyzer. (Boris Okner via otis) 18. Added a public, extensible scoring API. For details, see the javadoc for org.apache.lucene.search.Similarity. 19. Fixed return of Hits.id() from float to int. (Terry Steichen via Peter). 20. Added getFieldNames() to IndexReader and Segment(s)Reader classes. (Peter Mularien via otis) 21. Added getFields(String) and getValues(String) methods. Contributed by Rasik Pandey on 2002-10-09 (Rasik Pandey via otis) 22. Revised internal search APIs. Changes include: a. Queries are no longer modified during a search. This makes it possible, e.g., to reuse the same query instance with multiple indexes from multiple threads. b. Term-expanding queries (e.g. PrefixQuery, WildcardQuery, etc.) now work correctly with MultiSearcher, fixing bugs 12619 and 12667. c. Boosting BooleanQuery's now works, and is supported by the query parser (problem reported by Lee Mallabone). Thus a query like "(+foo +bar)^2 +baz" is now supported and equivalent to "(+foo^2 +bar^2) +baz". d. New method: Query.rewrite(IndexReader). This permits a query to re-write itself as an alternate, more primitive query. Most of the term-expanding query classes (PrefixQuery, WildcardQuery, etc.) are now implemented using this method. e. New method: Searchable.explain(Query q, int doc). This returns an Explanation instance that describes how a particular document is scored against a query. An explanation can be displayed as either plain text, with the toString() method, or as HTML, with the toHtml() method. Note that computing an explanation is as expensive as executing the query over the entire index. This is intended to be used in developing Similarity implementations, and, for good performance, should not be displayed with every hit. f. Scorer and Weight are public, not package protected. It now possible for someone to write a Scorer implementation that is not in the org.apache.lucene.search package. This is still fairly advanced programming, and I don't expect anyone to do this anytime soon, but at least now it is possible. g. Added public accessors to the primitive query classes (TermQuery, PhraseQuery and BooleanQuery), permitting access to their terms and clauses. Caution: These are extensive changes and they have not yet been tested extensively. Bug reports are appreciated. (cutting) 23. Added convenience RAMDirectory constructors taking File and String arguments, for easy FSDirectory to RAMDirectory conversion. (otis) 24. Added code for manual renaming of files in FSDirectory, since it has been reported that java.io.File's renameTo(File) method sometimes fails on Windows JVMs. (Matt Tucker via otis) 25. Refactored QueryParser to make it easier for people to extend it. Added the ability to automatically lower-case Wildcard terms in the QueryParser. (Tatu Saloranta via otis) 1.2 RC6 1. Changed QueryParser.jj to have "?" be a special character which allowed it to be used as a wildcard term. Updated TestWildcard unit test also. (Ralf Hettesheimer via carlson) 1.2 RC5 1. Renamed build.properties to default.properties and updated the BUILD.txt document to describe how to override the default.property settings without having to edit the file. This brings the build process closer to Scarab's build process. (jon) 2. Added MultiFieldQueryParser class. (Kelvin Tan, via otis) 3. Updated "powered by" links. (otis) 4. Fixed instruction for setting up JavaCC - Bug #7017 (otis) 5. Added throwing exception if FSDirectory could not create directory - Bug #6914 (Eugene Gluzberg via otis) 6. Update MultiSearcher, MultiFieldParse, Constants, DateFilter, LowerCaseTokenizer javadoc (otis) 7. Added fix to avoid NullPointerException in results.jsp (Mark Hayes via otis) 8. Changed Wildcard search to find 0 or more char instead of 1 or more (Lee Mallobone, via otis) 9. Fixed error in offset issue in GermanStemFilter - Bug #7412 (Rodrigo Reyes, via otis) 10. Added unit tests for wildcard search and DateFilter (otis) 11. Allow co-existence of indexed and non-indexed fields with the same name (cutting/casper, via otis) 12. Add escape character to query parser. (briangoetz) 13. Applied a patch that ensures that searches that use DateFilter don't throw an exception when no matches are found. (David Smiley, via otis) 14. Fixed bugs in DateFilter and wildcardquery unit tests. (cutting, otis, carlson) 1.2 RC4 1. Updated contributions section of website. Add XML Document #3 implementation to Document Section. Also added Term Highlighting to Misc Section. (carlson) 2. Fixed NullPointerException for phrase searches containing unindexed terms, introduced in 1.2RC3. (cutting) 3. Changed document deletion code to obtain the index write lock, enforcing the fact that document addition and deletion cannot be performed concurrently. (cutting) 4. Various documentation cleanups. (otis, acoliver) 5. Updated "powered by" links. (cutting, jon) 6. Fixed a bug in the GermanStemmer. (Bernhard Messer, via otis) 7. Changed Term and Query to implement Serializable. (scottganyo) 8. Fixed to never delete indexes added with IndexWriter.addIndexes(). (cutting) 9. Upgraded to JUnit 3.7. (otis) 1.2 RC3 1. IndexWriter: fixed a bug where adding an optimized index to an empty index failed. This was encountered using addIndexes to copy a RAMDirectory index to an FSDirectory. 2. RAMDirectory: fixed a bug where RAMInputStream could not read across more than across a single buffer boundary. 3. Fix query parser so it accepts queries with unicode characters. (briangoetz) 4. Fix query parser so that PrefixQuery is used in preference to WildcardQuery when there's only an asterisk at the end of the term. Previously PrefixQuery would never be used. 5. Fix tests so they compile; fix ant file so it compiles tests properly. Added test cases for Analyzers and PriorityQueue. 6. Updated demos, added Getting Started documentation. (acoliver) 7. Added 'contributions' section to website & docs. (carlson) 8. Removed JavaCC from source distribution for copyright reasons. Folks must now download this separately from metamata in order to compile Lucene. (cutting) 9. Substantially improved the performance of DateFilter by adding the ability to reuse TermDocs objects. (cutting) 10. Added IndexReader methods: public static boolean indexExists(String directory); public static boolean indexExists(File directory); public static boolean indexExists(Directory directory); public static boolean isLocked(Directory directory); public static void unlock(Directory directory); (cutting, otis) 11. Fixed bugs in GermanAnalyzer (gschwarz) 1.2 RC2, 19 October 2001: - added sources to distribution - removed broken build scripts and libraries from distribution - SegmentsReader: fixed potential race condition - FSDirectory: fixed so that getDirectory(xxx,true) correctly erases the directory contents, even when the directory has already been accessed in this JVM. - RangeQuery: Fix issue where an inclusive range query would include the nearest term in the index above a non-existant specified upper term. - SegmentTermEnum: Fix NullPointerException in clone() method when the Term is null. - JDK 1.1 compatibility fix: disabled lock files for JDK 1.1, since they rely on a feature added in JDK 1.2. 1.2 RC1 (first Apache release), 2 October 2001: - packages renamed from com.lucene to org.apache.lucene - license switched from LGPL to Apache - ant-only build -- no more makefiles - addition of lock files--now fully thread & process safe - addition of German stemmer - MultiSearcher now supports low-level search API - added RangeQuery, for term-range searching - Analyzers can choose tokenizer based on field name - misc bug fixes. 1.01b (last Sourceforge release), 2 July 2001 . a few bug fixes . new Query Parser . new prefix query (search for "foo*" matches "food") 1.0, 2000-10-04 This release fixes a few serious bugs and also includes some performance optimizations, a stemmer, and a few other minor enhancements. 0.04 2000-04-19 Lucene now includes a grammar-based tokenizer, StandardTokenizer. The only tokenizer included in the previous release (LetterTokenizer) identified terms consisting entirely of alphabetic characters. The new tokenizer uses a regular-expression grammar to identify more complex classes of terms, including numbers, acronyms, email addresses, etc. StandardTokenizer serves two purposes: 1. It is a much better, general purpose tokenizer for use by applications as is. The easiest way for applications to start using StandardTokenizer is to use StandardAnalyzer. 2. It provides a good example of grammar-based tokenization. If an application has special tokenization requirements, it can implement a custom tokenizer by copying the directory containing the new tokenizer into the application and modifying it accordingly. 0.01, 2000-03-30 First open source release. The code has been re-organized into a new package and directory structure for this release. It builds OK, but has not been tested beyond that since the re-organization.