Apache
/
lucene
mirror of https://github.com/apache/lucene.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
lucene/example/solr/conf/solrconfig.xml

400 lines
16 KiB
XML
Executable File
Raw Blame History

<?xml version="1.0" ?>
<!--
Licensed to the Apache Software Foundation (ASF) under one or more
contributor license agreements. See the NOTICE file distributed with
this work for additional information regarding copyright ownership.
The ASF licenses this file to You under the Apache License, Version 2.0
(the "License"); you may not use this file except in compliance with
the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-->
<config>
<!-- Used to specify an alternate directory to hold all index data
other than the default ./data under the Solr home.
If replication is in use, this should match the replication configuration. -->
<!--
<dataDir>./solr/data</dataDir>
-->
<indexDefaults>
<!-- Values here affect all index writers and act as a default unless overridden. -->
<useCompoundFile>false</useCompoundFile>
<mergeFactor>10</mergeFactor>
<maxBufferedDocs>1000</maxBufferedDocs>
<maxMergeDocs>2147483647</maxMergeDocs>
<maxFieldLength>10000</maxFieldLength>
<writeLockTimeout>1000</writeLockTimeout>
<commitLockTimeout>10000</commitLockTimeout>
</indexDefaults>
<mainIndex>
<!-- options specific to the main on-disk lucene index -->
<useCompoundFile>false</useCompoundFile>
<mergeFactor>10</mergeFactor>
<maxBufferedDocs>1000</maxBufferedDocs>
<maxMergeDocs>2147483647</maxMergeDocs>
<maxFieldLength>10000</maxFieldLength>
<!-- If true, unlock any held write or commit locks on startup.
This defeats the locking mechanism that allows multiple
processes to safely access a lucene index, and should be
used with care. -->
<unlockOnStartup>false</unlockOnStartup>
</mainIndex>
<!-- the default high-performance update handler -->
<updateHandler class="solr.DirectUpdateHandler2">
<!-- A prefix of "solr." for class names is an alias that
causes solr to search appropriate packages, including
org.apache.solr.(search|update|request|core|analysis)
-->
<!-- autocommit pending docs if certain criteria are met
<autoCommit>
<maxDocs>10000</maxDocs>
<maxTime>1000</maxTime>
</autoCommit>
-->
<!-- The RunExecutableListener executes an external command.
exe - the name of the executable to run
dir - dir to use as the current working directory. default="."
wait - the calling thread waits until the executable returns. default="true"
args - the arguments to pass to the program. default=nothing
env - environment variables to set. default=nothing
-->
<!-- A postCommit event is fired after every commit or optimize command
<listener event="postCommit" class="solr.RunExecutableListener">
<str name="exe">snapshooter</str>
<str name="dir">solr/bin</str>
<bool name="wait">true</bool>
<arr name="args"> <str>arg1</str> <str>arg2</str> </arr>
<arr name="env"> <str>MYVAR=val1</str> </arr>
</listener>
-->
<!-- A postOptimize event is fired only after every optimize command, useful
in conjunction with index distribution to only distribute optimized indicies
<listener event="postOptimize" class="solr.RunExecutableListener">
<str name="exe">snapshooter</str>
<str name="dir">solr/bin</str>
<bool name="wait">true</bool>
</listener>
-->
</updateHandler>
<query>
<!-- Maximum number of clauses in a boolean query... can affect
range or prefix queries that expand to big boolean
queries. An exception is thrown if exceeded. -->
<maxBooleanClauses>1024</maxBooleanClauses>
<!-- Cache used by SolrIndexSearcher for filters (DocSets),
unordered sets of *all* documents that match a query.
When a new searcher is opened, its caches may be prepopulated
or "autowarmed" using data from caches in the old searcher.
autowarmCount is the number of items to prepopulate. For LRUCache,
the autowarmed items will be the most recently accessed items.
Parameters:
class - the SolrCache implementation (currently only LRUCache)
size - the maximum number of entries in the cache
initialSize - the initial capacity (number of entries) of
the cache. (seel java.util.HashMap)
autowarmCount - the number of entries to prepopulate from
and old cache.
-->
<filterCache
class="solr.LRUCache"
size="512"
initialSize="512"
autowarmCount="256"/>
<!-- queryResultCache caches results of searches - ordered lists of
document ids (DocList) based on a query, a sort, and the range
of documents requested. -->
<queryResultCache
class="solr.LRUCache"
size="512"
initialSize="512"
autowarmCount="256"/>
<!-- documentCache caches Lucene Document objects (the stored fields for each document).
Since Lucene internal document ids are transient, this cache will not be autowarmed. -->
<documentCache
class="solr.LRUCache"
size="512"
initialSize="512"
autowarmCount="0"/>
<!-- If true, stored fields that are not requested will be loaded lazily.
-->
<enableLazyFieldLoading>false</enableLazyFieldLoading>
<!-- Example of a generic cache. These caches may be accessed by name
through SolrIndexSearcher.getCache(),cacheLookup(), and cacheInsert().
The purpose is to enable easy caching of user/application level data.
The regenerator argument should be specified as an implementation
of solr.search.CacheRegenerator if autowarming is desired. -->
<!--
<cache name="myUserCache"
class="solr.LRUCache"
size="4096"
initialSize="1024"
autowarmCount="1024"
regenerator="org.mycompany.mypackage.MyRegenerator"
/>
-->
<!-- An optimization that attempts to use a filter to satisfy a search.
If the requested sort does not include score, then the filterCache
will be checked for a filter matching the query. If found, the filter
will be used as the source of document ids, and then the sort will be
applied to that.
<useFilterForSortedQuery>true</useFilterForSortedQuery>
-->
<!-- An optimization for use with the queryResultCache. When a search
is requested, a superset of the requested number of document ids
are collected. For example, if a search for a particular query
requests matching documents 10 through 19, and queryWindowSize is 50,
then documents 0 through 50 will be collected and cached. Any further
requests in that range can be satisfied via the cache. -->
<queryResultWindowSize>10</queryResultWindowSize>
<!-- This entry enables an int hash representation for filters (DocSets)
when the number of items in the set is less than maxSize. For smaller
sets, this representation is more memory efficient, more efficient to
iterate over, and faster to take intersections. -->
<HashDocSet maxSize="3000" loadFactor="0.75"/>
<!-- boolToFilterOptimizer converts boolean clauses with zero boost
into cached filters if the number of docs selected by the clause exceeds
the threshold (represented as a fraction of the total index) -->
<boolTofilterOptimizer enabled="true" cacheSize="32" threshold=".05"/>
<!-- a newSearcher event is fired whenever a new searcher is being prepared
and there is a current searcher handling requests (aka registered). -->
<!-- QuerySenderListener takes an array of NamedList and executes a
local query request for each NamedList in sequence. -->
<!--
<listener event="newSearcher" class="solr.QuerySenderListener">
<arr name="queries">
<lst> <str name="q">solr</str> <str name="start">0</str> <str name="rows">10</str> </lst>
<lst> <str name="q">rocks</str> <str name="start">0</str> <str name="rows">10</str> </lst>
</arr>
</listener>
-->
<!-- a firstSearcher event is fired whenever a new searcher is being
prepared but there is no current registered searcher to handle
requests or to gain autowarming data from. -->
<!--
<listener event="firstSearcher" class="solr.QuerySenderListener">
<arr name="queries">
<lst> <str name="q">fast_warm</str> <str name="start">0</str> <str name="rows">10</str> </lst>
</arr>
</listener>
-->
<!-- If a search request comes in and there is no current registered searcher,
then immediately register the still warming searcher and use it. If
"false" then all requests will block until the first searcher is done
warming. -->
<useColdSearcher>false</useColdSearcher>
<!-- Maximum number of searchers that may be warming in the background
concurrently. An error is returned if this limit is exceeded. Recommend
1-2 for read-only slaves, higher for masters w/o cache warming. -->
<maxWarmingSearchers>4</maxWarmingSearchers>
</query>
<!--Make sure your system has some authentication before enabling remote streaming! -->
<requestParsers enableRemoteStreaming="false" multipartUploadLimitInKB="2048" />
<!-- requestHandler plugins... incoming queries will be dispatched to the
correct handler based on the qt (query type) param matching the
name of registered handlers.
The "standard" request handler is the default and will be used if qt
is not specified in the request.
-->
<requestHandler name="standard" class="solr.StandardRequestHandler">
<!-- default values for query parameters -->
<lst name="defaults">
<str name="echoParams">explicit</str>
<!--
<int name="rows">10</int>
<str name="fl">*</str>
<str name="version">2.1</str>
-->
</lst>
</requestHandler>
<requestHandler name="indexinfo" class="solr.IndexInfoRequestHandler"/>
<!-- DisMaxRequestHandler allows easy searching across multiple fields
for simple user-entered phrases.
see http://wiki.apache.org/solr/DisMaxRequestHandler
-->
<requestHandler name="dismax" class="solr.DisMaxRequestHandler" >
<lst name="defaults">
<str name="echoParams">explicit</str>
<float name="tie">0.01</float>
<str name="qf">
text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
</str>
<str name="pf">
text^0.2 features^1.1 name^1.5 manu^1.4 manu_exact^1.9
</str>
<str name="bf">
ord(poplarity)^0.5 recip(rord(price),1,1000,1000)^0.3
</str>
<str name="fl">
id,name,price,score
</str>
<str name="mm">
2&lt;-1 5&lt;-2 6&lt;90%
</str>
<int name="ps">100</int>
<str name="q.alt">*:*</str>
</lst>
</requestHandler>
<!-- Note how you can register the same handler multiple times with
different names (and different init parameters)
-->
<requestHandler name="partitioned" class="solr.DisMaxRequestHandler" >
<lst name="defaults">
<str name="echoParams">explicit</str>
<str name="qf">text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0</str>
<str name="mm">2&lt;-1 5&lt;-2 6&lt;90%</str>
<!-- This is an example of using Date Math to specify a constantly
moving date range in a config...
-->
<str name="bq">incubationdate_dt:[* TO NOW/DAY-1MONTH]^2.2</str>
</lst>
<!-- In addition to defaults, "appends" params can be specified
to identify values which should be appended to the list of
multi-val params from the query (or the existing "defaults").
In this example, the param "fq=instock:true" will be appended to
any query time fq params the user may specify, as a mechanism for
partitioning the index, independent of any user selected filtering
that may also be desired (perhaps as a result of faceted searching).
NOTE: there is *absolutely* nothing a client can do to prevent these
"appends" values from being used, so don't use this mechanism
unless you are sure you always want it.
-->
<lst name="appends">
<str name="fq">inStock:true</str>
</lst>
<!-- "invariants" are a way of letting the Solr maintainer lock down
the options available to Solr clients. Any params values
specified here are used regardless of what values may be specified
in either the query, the "defaults", or the "appends" params.
In this example, the facet.field and facet.query params are fixed,
limiting the facets clients can use. Faceting is not turned on by
default - but if the client does specify facet=true in the request,
these are the only facets they will be able to see counts for;
regardless of what other facet.field or facet.query params they
may specify.
NOTE: there is *absolutely* nothing a client can do to prevent these
"invariants" values from being used, so don't use this mechanism
unless you are sure you always want it.
-->
<lst name="invariants">
<str name="facet.field">cat</str>
<str name="facet.field">manu_exact</str>
<str name="facet.query">price:[* TO 500]</str>
<str name="facet.query">price:[500 TO *]</str>
</lst>
</requestHandler>
<requestHandler name="instock" class="solr.DisMaxRequestHandler" >
<!-- for legacy reasons, DisMaxRequestHandler will assume all init
params are "defaults" if you don't explicitly specify any defaults.
-->
<str name="fq">
inStock:true
</str>
<str name="qf">
text^0.5 features^1.0 name^1.2 sku^1.5 id^10.0 manu^1.1 cat^1.4
</str>
<str name="mm">
2&lt;-1 5&lt;-2 6&lt;90%
</str>
</requestHandler>
<!-- Standard update plugin. If we put this on /update, it will get all the new goodness -->
<requestHandler name="/update/xml" class="solr.XmlUpdateRequestHandler" >
<!--
<lst name="defaults">
<str name="name">value</str>
</lst>
-->
</requestHandler>
<requestHandler name="/debug/dump" class="solr.DumpRequestHandler" />
<!-- NOTE, /update is mapped to a servlet, we can have the filter handle requests off that! -->
<requestHandler name="/update/commit" class="solr.CommitRequestHandler" />
<!-- queryResponseWriter plugins... query responses will be written using the
writer specified by the 'wt' request parameter matching the name of a registered
writer.
The "standard" writer is the default and will be used if 'wt' is not specified
in the request. XMLResponseWriter will be used if nothing is specified here.
The json, python, and ruby writers are also available by default.
<queryResponseWriter name="standard" class="org.apache.solr.request.XMLResponseWriter"/>
<queryResponseWriter name="json" class="org.apache.solr.request.JSONResponseWriter"/>
<queryResponseWriter name="python" class="org.apache.solr.request.PythonResponseWriter"/>
<queryResponseWriter name="ruby" class="org.apache.solr.request.RubyResponseWriter"/>
<queryResponseWriter name="custom" class="com.example.MyResponseWriter"/>
-->
<!-- XSLT response writer transforms the XML output by any xslt file found
in Solr's conf/xslt directory. Changes to xslt files are checked for
every xsltCacheLifetimeSeconds.
-->
<queryResponseWriter name="xslt" class="org.apache.solr.request.XSLTResponseWriter">
<int name="xsltCacheLifetimeSeconds">5</int>
</queryResponseWriter>
<!-- config for the admin interface -->
<admin>
<defaultQuery>solr</defaultQuery>
<gettableFiles>solrconfig.xml schema.xml admin-extra.html</gettableFiles>
<!-- pingQuery should be "URLish" ...
&amp; separated key=val pairs ... but there shouldn't be any
URL escaping of the values -->
<pingQuery>
qt=dismax&amp;q=solr&amp;start=3&amp;fq=id:[* TO *]&amp;fq=cat:[* TO *]
</pingQuery>
<!-- configure a healthcheck file for servers behind a loadbalancer
<healthcheck type="file">server-enabled</healthcheck>
-->
</admin>
</config>
Reference in New Issue View Git Blame Copy Permalink