- Upgrading to Jersey 2.x.
- Updating NOTICE files where necessary.
- Fixing checkstyle issues.
This closes#2206.
Signed-off-by: Andy LoPresto <alopresto@apache.org>
- Upgraded immediately actionable dependency versions from Meterian report.
- Upgraded jackson-core test dependencies for HBase and Elasticsearch modules.
- Only 3 instances of jackson-core < 2.8.6 (Google Cloud Platform and Spark Receiver modules).
- Upgraded version of poi dependency in nifi-email-processors to 3.16.
- Resolving dependency issues after rebasing against 1.5.0-SNAPSHOT.
- Removed jackson-databind from <dependencyManagement> block in nifi/pom.xml and added explicit reference to ${jackson.version} in all referenced artifacts.
- Removed jackson-mapper-asl from <dependencyManagement> block in nifi/pom.xml and added explicit reference to ${jackson.old.version} in all referenced artifacts.
- Removed Jasypt from <dependencyManagement> and added explicit version in test dependency for legacy compatibility.
- This closes#2084
- Added XmlUtils class.
- Added unit test.
- Added XXE test resource.
- Refactored JAXB unmarshalling globally to prevent XXE attacks.
- Refactored duplicated/legacy code.
- Cleaned up commented code.
- Switched from FileInputStream back to StreamSource in AuthorizerFactoryBean.
- This closes#2134
Before this fix, 'NullPointerException: Inflater has been closed' can be thrown as the Inflater is closed before input stream is consumed.
Also, calling close from AbstractTransaction.receive is removed, because the DataPacket is exposed as its return value and this class will not be able to know when to close the stream.
Signed-off-by: joewitt <joewitt@apache.org>
- Added batchCount, batchSize, batchDuration to limit flow files to be
included in a single Site-to-Site transaction.
- Added batch throttling logic when StandardRemoteGroupPort transfers
flow files to a remote input port using the batch limit configurations,
so that users can limit batch not only for pulling data, but also pushing data.
- Added destination list shuffle to provide better load distribution.
Previously, the load distribution algorithm produced the same host consecutively.
- Added new batch settings to FlowConfiguration.xsd.
- Added new batch settings to Flow Fingerprint.
- Added new batch settings to Audit.
- Sort ports by name at 'Remote Process Group Ports' dialog.
- Show 'No value set' when a batch configuration is not set
- Updated batch settings tooltip to clearly explain how it works the configuration works differently for input and output ports.
- Updated DTO by separating batch settings to BatchSettingsDTO to indicate count, size and duration are a set of configurations.
- This closes#1306
- Fixed SiteInfoProvider and HttpClient to use specified local address with its SiteToSiteRestApiClient
- Removed setupRequestConfig method call from connection and read timeout setter methods at SiteToSiteRestApiClient, because it created config object before local address was set
- Null clear StandardRemoteProcessGroup localAddress when user clears Local Network Interface
Signed-off-by: joewitt <joewitt@apache.org>
- Removed host and port field from Peer since the same information is
available in PeerDescription
- Refactored variable names in SocketRemoteSiteListener to improve readability
- Changed how SocketRemoteSiteListener constructs PeerDescription
instance. It used to use hard-coded 'localhost' as hostname, and
getPort() which returns server's port. Since the peer is a remote peer,
i.e the client, it should be client hostname and port.
- Added hostname resolution at DataTransferResource to make s2s.host
value consistent with RAW transport. Without this, RAW uses hostname
while HTTP uses IP address. It will be hard to be used from downstream flows.
- Replaced heavy use of mockito which was difficult to maintain, with
nifi-mock
- Added SiteToSiteAttributes and more assertions in unit tests
This closes#1342.
Signed-off-by: Bryan Bende <bbende@apache.org>
- Added urls in addition to the existing url, to support multiple target
URLs
- Backward compatibility is provided by returning the first url if
multipe urls are specified, but component accessing the url doesn't
support multiple urls
- UI is not fully updated yet. Following UI components are planned to be updated
by different commits
- Search component: only the first URL is searchable and shown
- Component status: RPG status shows only the first URL
- Component action history: only the first URL is searchable and shown
- Updated Search component to use URLs.
This closes#1208.
- Changed AtomicBoolean to CountDownLatch to avoid sleeping thread in
some test cases
- Specified less number of threads for Jetty and LittleProxy than
default to lower resource usage
- Added try catch for the specific gateway timeout case (504) so that
test can pass even it happens while it fails with other errors
- Consolidated the target cluster URL resolving logic into
SiteToSiteRestApiClient's as a common method
- Changed to more descriptive error message
- Added more unit test cases
This commit fixes following two issues, that happens when a Root Group Port
policy for S2S data transfer is removed at a remote NiFi, after a client NiFi has
connected to that port:
1. At client side, Remote Process Group should show that authorization
is failing on its bulletin, but the Exception is caught and
ignored. Nothing is shown on the UI with HTTP transport protocol.
RAW S2S shows error on RPG bulletin. This commit fixes HTTP S2S to
behave the same.
2. At server side, corresponding input-port or output-port should show
that it is accessed by an unauthorized client on its bulletin, but it's
not shown with HTTP transport protocol.
RAW S2S shows warning messages for this. This commit fixes HTTP S2S to
behave the same.
In order to fix the 2nd issue above, request authorization at
DataTransferResource is changed from using DataTransferAuthorizable
directly, to call RootGroupPort.checkUserAuthorization().
Because the blettin is tied to the Port instance and it's
difficult to produce blettin message from this resource.
Since RootGroupPort.checkUserAuthorization uses
DataTransferAuthorizable inside, the check logic stays the same as
before.
Adding a RootGroupPortAuthorizable to provide access to necessary components for performing the authorization.
This closes#996
Without this fix, NiFi fails to send data via HTTP Site-to-Site through
Proxy which requires authentication due to AsynchronousCloseException.
It happens when async client replays producing contents in order to re-send the
request with auth credential for the proxy server, however the
connection is already closed.
This fix makes NiFi to send actual data only at the second round of requests, so that flow-file
contents can be sent without reading it twice.
Signed-off-by: Yolanda M. Davis <ymdavis@apache.org>
This closes#915
Refresh remote peer statuses even if the bootstrap node goes down.
Migrate existing code which handles the situation from
EndpointConnectionPool to PeerSelector, so that both RAW and HTTP
transport protocol has the same capability.
This closes#927.
- It couldn't send data larger than about 7KB due to the mis-use of
httpasyncclient library
- Updated httpasyncclient from 4.1.1 to 4.1.2
- Let httpasyncclient framework to call produceContent multiple times as
it gets ready to send more data via SSL session
- Added HTTPS test cases to TestHttpClient, which failed without this
fix
Fixed Site-to-Site Transit URI for HTTP to be consistent with RAW socket.
- Removed url from CommunicationsSession since it's redundant as we have
Peer.url, too. The value was not used from anywhere other than HTTP
Site-to-Site.
- Added createTransitUri method in Communicant interface, so that
implementation can customize transitUri while providing consistent
interface.
- Updated site-to-site client and server to support clustered nifi instances
NIFI-2274:
- Ensuring we use the correct URI when updating a connection.
This closes#530
- Adding a page for managing users and groups.
- Adding a page for managing access policies.
- Renaming accessPolicy in entity to permissions to avoid confusion with the accessPolicy model.
- Adding an Authorizable for access policies.
- Refactoring access policies endpoints.
NIFI-2022:
- Implementing site to site authorizations.
- Enable HTTP(S) for Site-to-Site communication
- Support HTTP Proxy in the middle of local and remote NiFi
- Support BASIC and DIGEST auth with Proxy Server
- Provide 2-phase style commit same as existing socket version
- [WIP] Test with the latest cluster env (without NCM) hasn't tested yet
- Fixed Buffer handling issues at asyc http client POST
- Fixed JS error when applying Remote Process Group Port setting from UI
- Use compression setting from UI
- Removed already finished TODO comments
- Added additional buffer draining code after receiving EOF
- Added inspection and assert code to make sure Site-to-Site client has
written data fully to output
stream
- Changed default nifi.remote.input.secure from true to false
This closes#497.
Fixed nifi-utils pom.xml comment about additional dependencies. (+5 squashed commits)
Squashed commits:
[965b766] NIFI-1753 Removed temporary work-around of duplicate certificate conversion util method and added nifi-security-utils as dependency of nifi-utils.
[cd35f9b] NIFI-1753 Replaced legacy X.509 certificate declarations with new declarations in SSLSocketChannel and EndpointConnectionPool.
Temporary work-around of duplicate certificate conversion util method because nifi-utils cannot depend on nifi-security-utils.
[6420897] NIFI-1753 Replaced legacy X.509 certificate declarations with new declarations in PostHTTP.
[b9868ef] NIFI-1753 Added convenience method for extracting DN from peer certificate chain in SSL socket (canonical implementation to reduce code duplication and references to legacy certificate implementations).
Refactored logic retrieving legacy X.509 certificates with reference to convenience method in NodeProtocolSenderImpl.
Replaced logic retrieving legacy X.509 certificates with reference to convenience method in SocketProtocolListener.
Cleaned up exception handling in SocketProtocolListener.
Replaced legacy X.509 certificate declarations with new declarations in HandleHttpRequest (needs manual test).
[e2d1c35] NIFI-1753 Added convenience methods for converting legacy X.509 certificates and abstract certificates to correct X.509 format.
Added unit tests for certificate manipulation.
Replaced logic retrieving legacy X.509 certificates with new logic in NodeProtocolSenderImpl.
Added bcpkix (Bouncy Castle PKI implementation) dependency to nifi-standard-processors pom.
This closes#346.
Signed-off-by: Andy LoPresto <alopresto@apache.org>
Koji Kawamura
joewitt
Mark Payne
Matt Gilman
Andy LoPresto
Jeff Storck
Joey Frazee
Bryan Bende
Pierre Villard
Bryan Rosander
Joseph Percivall
Aldrin Piri
Koji Kawamura