This change converts the `email_in_min_trust` site setting to
`email_in_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
After a couple of months we will remove the
`email_in_min_trust` setting entirely.
Internal ref: /t/115696
* DEV: Convert approve_new_topics_unless_trust_level to groups
This change converts the `approve_new_topics_unless_trust_level` site
setting to `approve_new_topics_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Hides the old setting
- Adds the new site setting
- Add a deprecation warning
- Updates to use the new setting
- Adds a migration to fill in the new setting if the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates tests to account for the new change
After a couple of months we will remove the
`approve_new_topics_unless_trust_level` setting entirely.
Internal ref: /t/115696
* add missing translation
* Add keyword entry
* Add migration
This change converts the `approve_unless_trust_level` site setting to
`approve_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Adds the new site setting
- Adds a deprecation warning
- Updates core to use the new settings.
- Adds a migration to fill in the new setting of the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates many tests to account for the new change
After a couple of months we will remove the `approve_unless_trust_level`
setting entirely.
Internal ref: /t/115696
This commit adds a new `search_default_sort_order` site setting,
set to "relevance" by default, that controls the default sort order
for the full page /search route.
If the user changes the order in the dropdown on that page, we remember
their preference automatically, and it takes precedence over the site
setting as a default from then on. This way people who prefer e.g.
Latest Post as their default can make it so.
This commit adds an `enable_s3_transfer_acceleration` site setting,
which is hidden to begin with. We are adding this because in certain
regions, using https://aws.amazon.com/s3/transfer-acceleration/ can
drastically speed up uploads, sometimes as much as 70% in certain
regions depending on the target bucket region. This is important for
us because we have direct S3 multipart uploads enabled everywhere
on our hosting.
To start, we only want this on the uploads bucket, not the backup one.
Also, this will accelerate both uploads **and** downloads, depending
on whether a presigned URL is used for downloading. This is the case
when secure uploads is enabled, not anywhere else at this time. To
enable the S3 acceleration on downloads more generally would be a
more in-depth change, since we currently store S3 Upload record URLs
like this:
```
url: "//test.s3.dualstack.us-east-2.amazonaws.com/original/2X/6/123456.png"
```
For acceleration, `s3.dualstack` would need to be changed to `s3-accelerate.dualstack`
here.
Note that for this to have any effect, Transfer Acceleration must be enabled
on the S3 bucket used for uploads per https://docs.aws.amazon.com/AmazonS3/latest/userguide/transfer-acceleration-examples.html.
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
This commit introduces a new endpoint to search categories and uses it
instead of the categories map that is preloaded using SiteSerializer.
This feature is enabled only when the hidden site setting
lazy_load_categories is enabled and should be used only on sites with
many categories.
At this moment, this feature is under a site setting named
lazy_load_categories.
In the future, categories will no longer be preloaded through site data.
This commit add information about categories in topic list and ensures
that data is used to display topic list items.
Parent categories are serialized too because they are necessary to
render {{category-link}}.
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
This is part 2 (of 3) for passkeys support.
This adds a hidden site setting plus routes and controller actions.
1. registering passkeys
Passkeys are registered in a two-step process. First, `create_passkey`
returns details for the browser to create a passkey. This includes
- a challenge
- the relying party ID and Origin
- the user's secure identifier
- the supported algorithms
- the user's existing passkeys (if any)
Then the browser creates a key with this information, and submits it to
the server via `register_passkey`.
2. authenticating passkeys
A similar process happens here as well. First, a challenge is created
and sent to the browser. Then the browser makes a public key credential
and submits it to the server via `passkey_auth_perform`.
3. renaming/deleting passkeys
These routes allow changing the name of a key and deleting it.
4. checking if session is trusted for sensitive actions
Since a passkey is a password replacement, we want to make sure to confirm the user's identity before allowing adding/deleting passkeys. The u/trusted-session GET route returns success if user has confirmed their session (and failed if user hasn't). In the frontend (in the next PR), we're using these routes to show the password confirmation screen.
The `/u/confirm-session` route allows the user to confirm their session with a password. The latter route's functionality already existed in core, under the 2FA flow, but it has been abstracted into its own here so it can be used independently.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The hidden site setting max_drafts_per_user defaults to 10_000 drafts per user.
The longest key should be "topic_<MAX_BIG_INT>" which is 25 characters.
We have one site setting, `auto_silence_fast_typers_max_trust_level`, which expects a trust level. However, the type is set to integer, which makes it very hard for a layman to enter the correct thing.
This PR changes the type of the site setting to the `TrustLevelSetting` enum.
The use of these are interchangeable in the back-end, since `SiteSetting.auto_silence_fast_typers_max_trust_level` still returns the integer value with the enum.
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
Why this change?
As part of our ongoing efforts to security harden the Discourse
application, we are adding the `cross_origin_opener_policy_header` site setting
which allows the `Cross-Origin-Opener-Policy` response header to be set on requests
that preloads the Discourse application. In more technical terms, only
GET requests that are not json or xhr will have the response header set.
The `cross_origin_opener_policy_header` site setting is hidden for now
for testing purposes and will either be released as a public site
setting or be remove if we decide to be opinionated and ship a default
for the `Cross-Origin-Opener-Policy` response header.
According to the output of this rake task:
`LOAD_PLUGINS=0 bin/rails "site_settings:find_dead"`
which searches for unused site settings, these settings:
```
rate_limit_new_user_create_topic
enable_system_avatars
check_for_new_features
allow_user_api_keys
```
are unused.
Why this change?
This is a follow up to e8f7b62752.
Tracking of GC stats didn't really belong in the `MethodProfiler` class
so we want to extract that concern into its own class.
As part of this PR, the `track_gc_stat_per_request` site setting has
also been renamed to `instrument_gc_stat_per_request`.
What does this change do?
This change adds a hidden `track_gc_stat_per_request` site setting which
when enabled will track the time spent in GC, major GC count and minor
GC count during a request.
Why is this change needed?
We have plans to tune our GC in production but without any
instrumentation, we will not be able to know if our tuning is effective
or not. This commit takes the first step at instrumenting some basic GC
stats in core during a request which can then be consumed by the discourse-prometheus plugin.
Allow anonymous users (logged-in, but set to anonymous posting) to like posts
---------
Co-authored-by: Emmett Ling <eling@zendesk.com>
Co-authored-by: Nat <natalie.tay@discourse.org>
This adds an option to allow non-image s3 files to be downloaded through CDN URL.
Addresses the issues in:
* meta.discourse.org/t/s3-cdn-url-not-being-used-on-non-image-uploads/175332
* meta.discourse.org/t/s3-uploads-using-cdn-for-pdfs/213218
Follow-up to b27e12445d
This commit adds 2 new site settings `default_sidebar_link_to_filtered_list` and `default_sidebar_show_count_of_new_items` to control the default values for the navigation menu preferences that were added in the linked commit (`sidebar_link_to_filtered_list` and `sidebar_show_count_of_new_items` respectively).
Followup to d51baa3bb3
Also includes: Force full rerender of post-stream widget when switching topics. This ensures that plugin/theme decorators are re-run when we switch between topics with the loading slider enabled.
This brings the functionality from https://github.com/discourse/discourse-loading-slider into Discourse core. Default behaviour remains the same - the new slider mode can be enabled using the new 'page_loading_indicator' site setting.
Why this change?
We are currently not fully satisfied with the current way to edit the
categories and tags that appears in the sidebar where the user is
redirected to the tracking preferences tab in the user's profile causing
the user to lose context of the current page. In addition, the dropdown
to select categories or tags limits the amount of information we can
display.
Since editing or adding a custom categories section is already using a
modal, we have decided to switch editing the categories and tags that
appear in the sidebar to use a modal as well.
This commit removes the `new_edit_sidebar_categories_tags_interface_groups` site setting and
make the modals the default for all users.
New setting which allow admin to define behavior when topic is in watched category and muted topic and vice versa.
If watched_precedence_over_muted setting is true, that topic is still visible in list of topics and notification is created.
If watched_precedence_over_muted setting is false, that topic is not still visible in list of topics and notification is skipped as well.
This PR splits up the preference that controls the count vs dot and destination of sidebar links, which is really hard to understand, into 2 simpler checkboxes:
The new preferences/checkboxes are off by default, but there are database migrations to switch the old preference to the new ones so that existing users don't have to update their preferences to keep their preferred behavior of sidebar links when this changed is rolled out.
Internal topic: t/103529.
Blake Erickson
Martin Brennan
Krzysztof Kotlarek
Penar Musaraj
Kris
Bianca Nenciu
Ted Johansson
Renato Atilio
Gerhard Schlager
Alan Guo Xiang Tan
Juan David Martínez Cubillos
Emmett Ling
Rafael dos Santos Silva
Joe
liushuyu
Selase Krakani
Guhyoun Nam
Osama Sayegh
David Taylor
Keegan George