Updates the interface for implementing summarization strategies and adds a cache layer to summarize topics once.
The cache stores the final summary and each chunk used to build it, which will be useful when we have to extend or rebuild it.
* FIX: Video thumbnails can have duplicates
It's possible that a duplicate video or even a very similar video could
generate the same video thumbnail. Because video thumbnails are mapped
to their corresponding video by using the video sha1 in the thumbnail
filename we need to allow for duplicate thumbnails otherwise even when a
thumbnail has been generated for a topic it will not be mapped
correctly.
This will also allow you to re-upload a video on the same topic to
regenerate the thumbnail.
* fix typo
* FIX: Do not overwrite existing thumbnails
When auto generating video thumbnails they should not overwrite any
existing topic thumbnails.
This also addresses an issue with capitalized file extensions like .MOV
that were being excluded.
* Update app/models/post.rb
Remove comment
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
* FEATURE: Generate thumbnail images for uploaded videos
Topics in Discourse have a topic thumbnail feature which allows themes
to show a preview image before viewing the actual Topic.
This PR allows for the ability to generate a thumbnail image from an
uploaded video that can be use for the topic preview.
We call `post.update_uploads_secure_status` in both
`PostCreator` and `PostRevisor`. Only the former was checking
if `SiteSetting.secure_uploads?` was enabled, but the latter
was not. There is no need to enqueue the job
`UpdatePostUploadsSecureStatus` if secure_uploads is not
enabled for the site.
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
Currently we don’t have an association between reviewables and posts.
This sometimes leads to inconsistencies in the DB as a post can have
been deleted but an associated reviewable is still present.
This patch addresses this issue simply by adding a new association to
the `Post` model and by using the `dependent: :destroy` option.
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
See https://meta.discourse.org/t/discourse-email-messages-are-incorrectly-threaded/233499
for thorough reasoning.
This commit changes how we generate Message-IDs and do email
threading for emails sent from Discourse. The main changes are
as follows:
* Introduce an outbound_message_id column on Post that
is either a) filled with a Discourse-generated Message-ID
the first time that post is used for an outbound email
or b) filled with an original Message-ID from an external
mail client or service if the post was created from an
incoming email.
* Change Discourse-generated Message-IDs to be more consistent
and static, in the format `discourse/post/:post_id@:host`
* Do not send References or In-Reply-To headers for emails sent
for the OP of topics.
* Make sure that In-Reply-To is filled with either a) the OP's
Message-ID if the post is not a direct reply or b) the parent
post's Message-ID
* Make sure that In-Reply-To has all referenced post's Message-IDs
* Make sure that References is filled with a chain of Message-IDs
from the OP down to the parent post of the new post.
We also are keeping X-Discourse-Post-Id and X-Discourse-Topic-Id,
headers that we previously removed, for easier visual debugging
of outbound emails.
Finally, we backfill the `outbound_message_id` for posts that have
a linked `IncomingEmail` record, using the `message_id` of that record.
We do not need to do that for posts that don't have an incoming email
since they are backfilled at runtime if `outbound_message_id` is missing.
Updates automatically data on the stats section of the topic.
It will update automatically the following information: likes, replies and last reply (timestamp and user)
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
This will make future changes to the 'pull hotlinked images' system easier. This commit should not introduce any functional change.
For now, the old post_custom_field data is kept in the database. This will be dropped in a future commit.
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
We are planning on attaching bookmarks to more and
more other models, so it makes sense to make a polymorphic
relationship to handle this. This commit adds the new
columns and backfills them in the bookmark table, and
makes sure that any new bookmark changes fill in the columns
via DB triggers.
This way we can gradually change the frontend and backend
to use these new columns, and eventually delete the
old post_id and for_topic columns in `bookmarks`.
* PERF: Remove JOIN on categories for PM search
JOIN on categories is not needed when searchin in private messages as
PMs are not categorized.
* DEV: Use == for string comparison
* PERF: Optimize query for allowed topic groups
There was a query that checked for all topics a user or their groups
were allowed to see. This used UNION between topic_allowed_users and
topic_allowed_groups which was very inefficient. That was replaced with
a OR condition that checks in either tables more efficiently.
Sometimes administrators want to permanently delete posts and topics
from the database. To make sure that this is done for a good reasons,
administrators can do this only after one minute has passed since the
post was deleted or immediately if another administrator does it.
Previosuly, quotes from original topics are rendered incorrectly since the moved posts are not rebaked.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Staff can send a post to the review queue by clicking the "Flag Post" button next to "Take Action...". Clicking it flags the post using the "Notify moderators" score type and hides it. A custom message will be sent to the user.
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
These 2 indexes optimise performance on profile pages.
The summary page displays:
1. A list of "Top Link" - links sorted by number of clicks posted by user
2. A list of "Top Replies" - replies made by a user that go the most hearts
These two areas could devolve into full index or table scans, new indexes are there to avoid this cost on large dbs
One minor downside is that storage requirements go a tiny bit up to maintain the new indexes
Roman Rizzi
Blake Erickson
Ted Johansson
Daniel Waterworth
Loïc Guitaut
Martin Brennan
David Taylor
Andrei Prigorshnev
Jarek Radosz
Sam
Sérgio Saquetim
Bianca Nenciu
Alan Guo Xiang Tan
Martin Brennan
Dan Ungureanu
Vinoth Kannan
Mark VanLandingham
Krzysztof Kotlarek
Robin Ward