Use @here to mention all users that were allowed to topic directly or
through group, who liked topics or read the topic. Only first 10 users
will be notified.
Allow current user to keep existent tags when adding or removing a tag.
For example, a user could not remove a tag from a topic if the topic
had another tag that was restricted to a different category.
The code that checked this permission was duplicated everytime a new
settings of this type was added. This commit changes the behavior of
some functionality because some feature checks were bypassed for staff
members.
* DEV: Swap out optipng with oxipng
The oxipng binary has been added to our base docker image here:
244c9cb110
oxipng is a rust replacement for optipng that provides increased
performance and multi-threading. Checkout
https://github.com/shssoichiro/oxipng for more info.
* add instructions for installing oxipng
Similar to site settings, adds support for `refresh` option to theme settings.
```yaml
super_feature_enabled:
type: bool
default: false
refresh: true
```
When rendering the markdown code blocks we replace the
offending characters in the output string with spans highlighting a textual
representation of the character, along with a title attribute with
information about why the character was highlighted.
The list of characters stripped by this fix, which are the bidirectional
characters considered relevant, are:
U+202A
U+202B
U+202C
U+202D
U+202E
U+2066
U+2067
U+2068
U+2069
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
* Revert "DEV: increase lock timeout for multisite migration (#14831)"
This partially reverts commit 337ef60303.
We need to revert the mutex around `db:status:json` because the mutex is not available unless the rails environment is loaded which the `db:status:json` doesn't load before the mutex. We can't load the environment before entering the mutex because the mutex is meant to prevent other instances of the task from loading a rails environment while the database is migrating.
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: David Taylor <david@taylorhq.com>
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
PERF: Update like count in visible posts without an extra GET per like
Currently when a user is reading a topic and some post in it receive a
like from another user, the Ember app will be notified via MessageBus
and issue a GET to `/posts/{id}` to get the new like count. This worked
fine for us until today, but it can easily create a self-inflicted DDoS
when a topic with a large number of visitors gets a large number of
likes, since we will issue `visitors * likes` GET requests requests.
This patch optimizes this flow, by sending the new like count down in
the MessageBus notification, removing any need for the extra request.
It shouldn't cause any drift on the count because we send down the full
count instead of the difference too.
Possible follow-ups could include handling like removal.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
Support for invites alongside DiscourseConnect was added in 355d51af. This commit fixes the guardian method so that the bulk invite button functionality also works.
* FIX: Preserve field types when updating revision
When a post was edited quickly twice by the same user, the old post
revision was updated with the newest changes. To check if the change
was reverted (i.e. rename topic A to B and then back to A) a comparison
of the initial value and last value is performed. If the check passes
then the intermediary value is dismissed and only the initial value and
the last ones are preserved. Otherwise, the modification is dismissed
because the field returned to its initial value.
This used to work well for most fields, but failed for "tags" because
the field is an array and the values were transformed to strings to
perform the comparison.
* FIX: Reset last_editor_id if revision is reverted
If a post was revised and then the same revision was reverted,
last_editor_id was still set to the ID of the user who last edited the
post. This was a problem because the same person could then edit the
same post again and because it was the same user and same post, the
system attempted to update the last one (that did not exist anymore).
This commit introduces a new s3:ensure_cors_rules rake task
that is run as a prerequisite to s3:upload_assets. This rake
task calls out to the S3CorsRulesets class to ensure that
the 3 relevant sets of CORS rules are applied, depending on
site settings:
* assets
* direct S3 backups
* direct S3 uploads
This works for both Global S3 settings and Database S3 settings
(the latter set directly via SiteSetting).
As it is, only one rule can be applied, which is generally
the assets rule as it is called first. This commit changes
the ensure_cors! method to be able to apply new rules as
well as the existing ones.
This commit also slightly changes the existing rules to cover
direct S3 uploads via uppy, especially multipart, which requires
some more headers.
FinalDestination's follow_canonical mode used for embedded topics should work when canonical URLs are relative, as specified in [RFC 6596](https://datatracker.ietf.org/doc/html/rfc6596)
We are no longer able to display the image returned by Instagram directly within a Discourse site (either in the composer, or within a cooked post within a topic), so:
- Display an image placeholder in the composer preview
- A cooked post should use an iframe to display the Instagram 'embed' content
The `白名单` term becomes `名单 白名单` after it is processed by
cppjieba in :query mode. However, `白名单` is not tokenized as such by cppjieba when it
appears in a string of text. Therefore, this may lead to failed matches as
the search data generated while indexing may not contain all of the
terms generated by :query mode. We've decided to maintain parity for now
such that both indexing and querying uses the same :mix mode. This may
lead to less accurate search but our plan is to properly support CJK
search in the future.
In preparation for adding automatic CORS rules creation
for direct S3 uploads, I am adding tests here and moving the
CORS rule definitions into a dedicated class so they are all
in the one place.
There is a problem with ensure_cors! as well -- if there is
already a CORS rule defined (presumably the asset one) then
we do nothing and do not apply the new rule. This means that
the S3BackupStore.ensure_cors method does nothing right now
if the assets rule is already defined, and it will mean the
same for any direct S3 upload rules I add for uppy. We need
to be able to add more rules, not just one.
This is not a problem on our hosting because we define the
rules at an infra level.
If the initial `get`/`head` response within `resolve` returns a status code of `103`, attempt to fetch the same URL with the alternative `small_get` method.
* FIX: allowed_theme_ids should not be persisted in GlobalSettings
It was observed that the memoized value of `GlobalSetting.allowed_theme_ids` would be persisted across requests, which could lead to unpredictable/undesired behaviours in a multisite environment.
This change moves that logic out of GlobalSettings so that the returned theme IDs are correct for the current site.
Uses get_set_cache, which ultimately uses DistributedCache, which will take care of multisite issues for us.
Martin Brennan
Jarek Radosz
Bianca Nenciu
Dan Ungureanu
Mark VanLandingham
Blake Erickson
Penar Musaraj
Osama Sayegh
Vinoth Kannan
Neil Lalonde
Rafael dos Santos Silva
Daniel Waterworth
David Taylor
Sam
Krzysztof Kotlarek
Roman Rizzi
jbrw
Alan Guo Xiang Tan