Different environments run on different hardware so response times vary
based on hardware. Instead of hardcoding the timeout for
`SystemHelpers#try_until_success` to 2 seconds, we change it such that
it follows `Capybara.default_wait_timeout` which we have configured to
be higher in environments which runs on lousier hardware.
This change should reduce the amount of flakiness we're seeing on CI
with tests that rely on `SystemHlpers#try_until_success`.
Why is this change required?
We had a system test failed right after visiting a URL because an
element that was supposed to be on screen isn't. In the screenshot
captured, the app was still stuck on the splash screen. We're not sure
if this has been causing flakiness in our system tests but there is no
good reason to enable splash screen which adds some overhead to each
page load.
- Improves styleguide support
- Adds toggle color scheme to styleguide
- Adds properties mutators to styleguide
- Attempts to quit a session as soon as done with it in system specs, this should at least free resources faster
- Refactors fabricators to simplify them
- Adds more fabricators (uploads for example)
- Starts implementing components pattern in system specs
- Uses Chat::Message creator to create messages in system specs, this should help to have more real specs as the side effects should now happen
This is used when calling click_message_action_mobile to wait
for the message actions menu to finish animating up before
attempting to click on it using capybara. Without this, in
the time between capybara getting the x,y position of a menu
item to click on and the click being fired, the animating menu
can move that item out of the way.
With the new helper, we constantly compare x,y client rect positions
for the animating element and wait for them to stabilise. Once they
do, it means the animation is done, and it is safe to click on
anything within the element.
Re-enables mobile system specs for chat that were ignored because
of this.
Small js fix for fast edit to allow posts to save changes when the post contains apostrophes and quotation marks. Replaces unicode characters in text prior to saving the edit.
Includes system tests for fast edit and introduces a new system spec component for fast edit usage.
* DEV: Rnemae channel path to just c
Also swap the channel id and channel slug params to be consistent with core.
* linting
* channel_path
* Drop slugify helper and channel route without slug
* Request slug and route models through the channel model if possible
* DEV: Pass messageId as a dynamic segment instead of a query param
* Ensure change is backwards-compatible
* drop query param from oneboxes
* Correctly extract channelId from routes
* Better route organization using siblings for regular and near-message
* Ensures sessions are unique even when using parallelism
* prevents didReceiveAttrs to clear input mid test
* we disable animations in capybara so sometimes the message was barely showing
* adds wait
* ensures finished loading
* is it causing more harm than good?
* this check is slowing things for no reason
* actually target the button
* more resilient select chat message
* apply similar fix to bookmark
* fix
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit allows us to set the channel slug when creating new chat
channels. As well as this, it introduces a new `SlugsController` which can
generate a slug using `Slug.for` and a name string for input. We call this
after the user finishes typing the channel name (debounced) and fill in
the autogenerated slug in the background, and update the slug input
placeholder.
This autogenerated slug is used by default, but if the user writes anything
else in the input it will be used instead.
We are all in on system specs, so this commit moves all the chat quoting acceptance tests (some of which have been skipped for a while) into system specs.
Previously, calling `sign_in` would cause the browser to be redirected to `/`, and would cause the Ember app to boot. We would then call `visit()`, causing the app to boot for a second time.
This commit adds a `redirect=false` option to the `/session/username/become` route. This avoids the unnecessary boot of the app, and leads to significantly faster system spec run times.
In local testing, this takes the full system-spec suite for chat from ~6min to ~4min.
In #15474 we introduced dedicated support for date ranges. As part of that
change we added a fallback of "magic" date ranges, which treats dates in
any paragraph with exactly two dates as a range. There were discussions
about migrating all such paragraphs to use the new date range element, but
it was ultimately decided against.
This change removes the fallback and, as a bonus, adds support for multiple
date ranges in the same paragraph.
binding.pry gives a nicer syntax-highlighted environment
and better formatting for inspecting objects, and we still
have the byebug continue/step/next commands (which you can
also alias via .pryrc) via the pry-byebug gem
This helper is intended only for dev purposes. It allows you to pause a test while still being able to interact with the browser.
Usage:
```
it "works" do
visit("/")
pause_test
expect(page).to have_css(".foo")
end
```
Fixes broken behaviour of arrow buttons for certain users as the interval to scroll menu can be cancelled before the scrolling actually happens.
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
This commit introduces rails system tests run with chromedriver, selenium,
and headless chrome to our testing toolbox.
We use the `webdrivers` gem and `selenium-webdriver` which is what
the latest Rails uses so the tests run locally and in CI out of the box.
You can use `SELENIUM_VERBOSE_DRIVER_LOGS=1` to show extra
verbose logs of what selenium is doing to communicate with the system
tests.
By default JS logs are verbose so errors from JS are shown when
running system tests, you can disable this with
`SELENIUM_DISABLE_VERBOSE_JS_LOGS=1`
You can use `SELENIUM_HEADLESS=0` to run the system
tests inside a chrome browser instead of headless, which can be useful to debug things
and see what the spec sees. See note above about `bin/ember-cli` to avoid
surprises.
I have modified `bin/turbo_rspec` to exclude `spec/system` by default,
support for parallel system specs is a little shaky right now and we don't
want them slowing down the turbo by default either.
### PageObjects and System Tests
To make querying and inspecting parts of the page easier
and more reusable inbetween system tests, we are using the
concept of [PageObjects](https://www.selenium.dev/documentation/test_practices/encouraged/page_object_models/) in
our system tests. A "Page" here is generally corresponds to
an overarching ember route, e.g. "Topic" for `/t/324345/some-topic`,
and this contains logic for querying components within the topic
such as "Posts".
I have also split "Modals" into their own entity. Further down the
line we may want to explore creating independent "Component"
contexts.
Capybara DSL should be included in each PageObject class,
reference for this can be found at https://rubydoc.info/github/teamcapybara/capybara/master#the-dsl
For system tests, since they are so slow, we want to focus on
the "happy path" and not do every different possible context
and branch check using them. They are meant to be overarching
tests that check a number of things are correct using the full stack
from JS and ember to rails to ruby and then the database.
### CI Setup
Whenever a system spec fails, a screenshot
is taken and a build artifact is produced _after the entire CI run is complete_,
which can be downloaded from the Actions UI in the repo.
Most importantly, a step to build the Ember app using Ember CLI
is needed, otherwise the JS assets cannot be found by capybara:
```
- name: Build Ember CLI
run: bin/ember-cli --build
```
A new `--build` argument has been added to `bin/ember-cli` for this
case, which is not needed locally if you already have the discourse
rails server running via `bin/ember-cli -u` since the whole server is built and
set up by default.
Co-authored-by: David Taylor <david@taylorhq.com>