Previously we would unconditionally keep all images downloaded via pull_hotlinked_images, even if they are later removed from the post. This commit removes that logic, and relies on the existing link_post_uploads process to pick up the downloaded images in `cooked`. Specs are added to ensure this is working correctly for regular hotlinked images, and for oneboxes.
This commit should cause no functional change
- Split into functions to avoid deep nesting
- Register custom field type, and remove manual json parse/serialize
- Recover from deleted upload records
Also adds a test to ensure pull_hotlinked_images redownloads secure images only once
When rebaking a post we were invalidating _regular_ oneboxes but not inline oneboxes.
DEV: also renamed 'InlineOneboxer.purge' to 'InlineOneboxer.invalidate' to keep
the API consistent with 'Oneboxer.invalidate'
Previously the pull hotlinked images job was skipped after system edits. This ensured that we never had an infinite loop of system-edit/pull-hotlinked/system-edit/pull-hotlinked etc.
A side effect was that edits made by system for any other reason (e.g. API, removing full quotes) would prevent pulling hotlinked images. This commit removes the system edit check, and replaces it with another method to avoid an infinite job scheduling loop.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* We now have a site setting "topic_excerpt_maxlength" that is used when the OP is created or revised to generate a topic excerpt.
* However, posts created before this setting was introduced cannot benefit from this change unless they are revised, and if the topic excerpt length setting is changed that situation is also not covererd.
* This PR makes a change to rebake! to update the topic excerpt IF the post is the OP.
Adds a new topic_excerpt_maxlength site setting.
* When topic excerpt is requested for a post, use the new topic_excerpt_maxlength site setting to limit the size of the excerpt
* Remove code for getting/setting Post.excerpt_size as it is not used anywhere
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
avg_time on posts and topics have not been used in a year.
This uses a re-runnable ddl transaction diasabled migration to
drop the column, cause it touchs very high traffic table and may
deadlock
* Because custom emoji count as post "uploads" we were
marking them as secure when updating the secure status for post uploads.
* We were also giving them an access control post id, which meant
broken image previews from 403 errors in the admin custom emoji list.
* We now check if an upload is used as a custom emoji and do not
assign the access control post + never mark as secure.
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
If our reply tree somehow ends up with cycles or other odd
structures, we only want to consider a reply once, at the first
level in the tree that it appears.
It seems in some situations replies have been moved to other topics but
the `PostReply` table has not been updated. I will try and fix this in a
follow up PR, but for now this fix ensures that every time we ask a post
for its replies that we restrict it to the same topic.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
The following methods have long been deprecated in ruby due to flaws in their implementation per http://blade.nagaokaut.ac.jp/cgi-bin/vframe.rb/ruby/ruby-core/29293?29179-31097:
URI.escape
URI.unescape
URI.encode
URI.unencode
escape/encode are just aliases for one another. This PR uses the Addressable gem to replace these methods with its own encode, unencode, and encode_component methods where appropriate.
I have put all references to Addressable::URI here into the UrlHelper to keep them corralled in one place to make changes to this implementation easier.
Addressable is now also an explicit gem dependency.
In non-login-required sites, we prevent secure uploads already used in PMs from being used in public topics.
In login_required sites, secure uploads should be reusable in any topic, PM or not.
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
The URL '/images/transparent.png' will be used in the cooked content if upload record not found. In that case we have to use 'short_url' as image src in 'post.each_upload_url' method.
David Taylor
Krzysztof Kotlarek
jbrw
Guo Xiang Tan
Régis Hanol
Jarek Radosz
Michael Brown
Jeff Atwood
Martin Brennan
Kane York
Sam Saffron
Dan Ungureanu
Robin Ward
Penar Musaraj
Gerhard Schlager
Joffrey JAFFEUX
Leo McArdle
Daniel Waterworth
Vinoth Kannan
Roman Rizzi