Previously on boot we were always removing and adding the same pre-generated
files and symlinks.
This change attempts to avoid writing any automatically generated content if
it is exactly what it should be on disk.
This corrects issues where running a rails console can temporarily corrupt
internal state in production.
When secure media is enabled and an attachment is marked as secure we want to use the full url instead of the short-url so we get the same access control post protections as secure media uploads.
* Add uploads:sync_s3_acls rake task to ensure the ACLs in S3 are the correct (public-read or private) setting based on upload security
* Improved uploads:disable_secure_media to be more efficient and provide better messages to the user.
* Rename uploads:ensure_correct_acl task to uploads:secure_upload_analyse_and_update as it does more than check the ACL
* Many improvements to uploads:secure_upload_analyse_and_update
* Make sure that upload.access_control_post is unscoped so deleted posts are still fetched, because they still affect the security of the upload.
* Add escape hatch for capture_stdout in the form of RAILS_ENABLE_TEST_STDOUT. If provided the capture_stdout code will be ignored, so you can see the output if you need.
In some cases CTE caused pathologically bad query plans.
This optimises it so query runs by itself and caches for lifetime
of the topic query object.
This lightweight caching is done cause topic query will often
execute two queries (one for pinned and one for non pinned)
* Also fixes an issue where if webp was a downloaded hotlinked
image and then secure + sent in an email, it was not being
redacted because webp was not a supported media format in
FileHelper
* Webp originally removed as an image format in
https://github.com/discourse/discourse/pull/6377
and there was a spec to make sure a .bin webp
file did not get renamed from its type to webp.
However we want to support webp images now to make
sure they are properly redacted if secure media is
on, so change the example in the spec to use tiff,
another banned format, instead
* Attachments (non media files) were being marked as secure if just
SiteSetting.prevent_anons_from_downloading_files was enabled. this
was not correct as nothing should be marked as actually "secure" in
the DB without that site setting enabled
* Also add a proper standalone spec file for the upload security class
Follows up #64b35120
This also corrects it so bytes used for internal storage counts all the space
used, previously it was only counting uploads not optimized images.
Additionally we now correctly count storage for optimized images.
A follow-up correction to this change https://github.com/discourse/discourse/pull/9001.
When admin changes staff email still enforce old email confirm. Only allow auto-confirm of a new email by admin IF the target user is not also an admin. If an admin gets locked out of their email the site admin can use the rails console to solve the issue in a pinch.
When admin changes a user's email from the preferences page of that user:
* The user will not be sent an email to confirm that their
email is changing. They will be sent a reset password email
so they can set the password for their account at the new
email address.
* The user will still be sent an email to their old email to inform
them that it was changed.
* Admin and staff users still need to follow the same old + new
confirm process, as do users changing their own email.
A single SchemaCache instance is maintained by the connection pool, and made available via a schema_cache method on each connection. When the SchemaCache instance is fetched from the pool, its internal connection reference is updated to equal the requesting connection. However, since there is only one instance of SchemaCache, this internal connection reference is updated everywhere, and can ultimately result in multiple threads accessing the same database connection. In Discourse, this could result in Sidekiq jobs getting 'stuck' in database connections.
This patch modifies SchemaCache so that it caches the internal connection on a per-thread basis
Co-authored-by: Sam Saffron <sam.saffron@gmail.com>
Co-authored-by: Matt Palmer <mpalmer@hezmatt.org>
If a group mention could be notified on preview it was given an `<a>`
tag with the `.notify` class. When cooked it would display differently.
This patch makes the server side cooking match the client preview.
This may be the case when DiscourseLogstashLogger is initialized before
the application (see unicorn.conf.rb)
This commit is a follow-up to 28292d2759.
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Sam Saffron <sam.saffron@gmail.com>
This normalizes it so we only carry one place for grabbing disk space size
It also normalizes the command made so it uses Discourse.execute_command
which splits off params in a far cleaner way.
Previously we had many places in the app that called `hostname` to get
hostname of a server. This commit replaces the pattern in 2 ways
1. We cache the result in `Discourse.os_hostname` so it is only ever called once
2. We prefer to use Socket.gethostname which avoids making a shell command
This improves performance as we are not spawning hostname processes throughout
the app lifetime
Further on from my earlier PR #8973 also reject upload as secure if its origin URL contains images/emoji. We still check Emoji.all first to try and be canonical.
This may be a little heavy handed (e.g. if an external URL followed this same path it would be a false positive), but there are a lot of emoji aliases where the actual Emoji url is something, but you can have another image that should not be secure that that thing is an alias for. For example slight_smile.png does not show up in Emoji.all BUT slightly_smiling_face does, and it aliases slight_smile e.g. /images/emoji/twitter/slight_smile.png?v=9 and /images/emoji/twitter/slightly_smiling_face.png?v=9 are equivalent.
The rake task was broken, because the addition of the
UploadSecurity check returned true/false instead of the
upload ID to determine which uploads to set secure.
Also it was rebaking the posts in the wrong place and
pretty inefficiently at that. Also it was rebaking before
the upload was being changed to secure in the DB.
This also updates the task to set the access_control_post_id
for all uploads. the first post the upload is linked to is used
for the access control. if the upload doesn't get changed to
secure this doesn't affect anything.
Added a spec for the rake task to cover common cases.
Sometimes PullHotlinkedImages pulls down a site emoji and creates a new upload record for it. In the cases where these happen the upload is not created via the normal path that custom emoji follows, so we need to check in UploadSecurity whether the origin of the upload is based on a regular site emoji. If it is we never want to mark it as secure (we don't want emoji not accessible from other posts because of secure media).
This only became apparent because the uploads:ensure_correct_acl rake task uses UploadSecurity to check whether an upload should be secure, which would have marked a whole bunch of regular-old-emojis as secure.
After adding a tag as a synonym of another tag,
both tags will have the wrong topic counts. It's
corrected within 12 hours by the EnsureDbConsistency
job. This fix ensures the topic counts are updated
much sooner.
Previously we were caching by user_id, but the there are only two possible outcomes. Therefore we only need to cache two values.
This removes another N+1 query when serializing multiple user cards.
* Because custom emoji count as post "uploads" we were
marking them as secure when updating the secure status for post uploads.
* We were also giving them an access control post id, which meant
broken image previews from 403 errors in the admin custom emoji list.
* We now check if an upload is used as a custom emoji and do not
assign the access control post + never mark as secure.
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
This is not used in core or official plugins, and has been printing a deprecation notice since v2.3.0beta4. All OpenID 2.0 code and dependencies have been dropped. The user_open_ids table remains for now, in case anyone has missed the deprecation notice, and needs to migrate their data.
Context at https://meta.discourse.org/t/-/113249
This commit removes logic about spoilers because it should live inside
of the discourse-spoiler-alert plugin.
This PR:
https://github.com/discourse/discourse-spoiler-alert/pull/38
also completely removes spoilers from excerpts in order to keep them
from leaking in topic previews and notifications.
Some auth providers (e.g. Auth0 with default configuration) send the email address in the name field. In Discourse, the name field is made public, so this commit adds a safeguard to prevent emails being made public.
For some reasons, we have two ways of associating "custom fields" to a new topic:
using 'meta_data' and 'custom_fields'.
However, if we were to provide both arguments, the 'meta_data' would be overwritten
by any 'custom_fields' provided.
This commit ensures we can use both and merges the 'custom_fields' with the 'meta_data'.
This commit adds support for an optional "logout" parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a "logout=true" parameter to the encoded/signed "sso" payload,
then Discourse will treat the request as a logout request instead
of an authentication request. The logout flow works something like
this:
* User requests logout at SSO-Consumer site (e.g., clicks "Log me out!"
on web browser).
* SSO-Consumer site does whatever it does to destroy User's session on
the SSO-Consumer site.
* SSO-Consumer then redirects browser to the Discourse sso_provider
endpoint, with a signed request bearing "logout=true" in addition
to the usual nonce and the "return_sso_url".
* Discourse destroys User's discourse session and redirects browser back
to the "return_sso_url".
* SSO-Consumer site does whatever it does --- notably, it cannot request
SSO credentials from Discourse without the User being prompted to login
again.
Accounting for fractional seconds, a distributed mutex can be held for
almost a full second longer than its validity.
For example: if we grab the lock at 10.5 seconds passed the epoch with a
validity of 5 seconds, the lock would be released at 16 seconds passed
the epoch. However, in this case assuming that all other processing
takes a negligible amount of time, the key would be expired at 15.5
seconds passed the epoch.
Using expireat, the key is now expired exactly when the lock is released.
When we change upload's sha1 (e.g. when resizing images) it won't match the data in the most recent S3 inventory index. With this change the uploads that have been updated since the inventory has been generated are ignored.
When FinalDestination is given a URL it encodes it before doing anything else. however S3 presigned URLs should not be messed with in any way otherwise we can end up with 400 errors when downloading the URL e.g.
<Error><Code>InvalidToken</Code><Message>The provided token is malformed or otherwise invalid.</Message>
The signature of presigned URLs is very important and is automatically generated and should be preserved.
This should make the importer more resilient to incomplete or damaged
backups. It will disable some validations and attempt to automatically
repair category permissions before importing.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
When 'categories topics' setting is set to 0, the system will
automatically try to find a value to keep the two columns (categories
and topics) symmetrical.
The value is computed as 1.5x the number of top level categories and at
least 5 topics will always be returned.
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
Previously we would use the date the post was updated at as the grant date
this caused confusion.
This also tidies up the badges sql file which was using outdated patterns
for multi line strings.
A race condition issue is possible when multiple thread/processes are calling this method.
`ls` prints out to stderr "cannot access '...': No such file or directory" if any of the files it's currently trying to list are being removed by the `xargs rm -rf` in an another process. That doesn't affect the result, but it did raise an error before this change.
Tested on a production instance where the original issue was observed.
Co-Authored-By: Régis Hanol <regis@hanol.fr>
This allows us to use `sourceURL` which otherwise does not work. In the
future we hope to have proper source maps in development mode and
disable this again.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
For consistency this PR introduces using custom markdown and short upload:// URLs for video and audio uploads, rather than just treating them as links and relying on the oneboxer. The markdown syntax for videos is  and for audio it is .
This is achieved in discourse-markdown-it by modifying the rules for images in mardown-it via md.renderer.rules.image. We return HTML instead of the token when we encounter audio or video after | and the preview renders that HTML. Also when uploading an audio or video file we insert the relevant markdown into the composer.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
The `sourceURL` directive must be on the same line as the thing it's
referencing. This patch allows it to work again in development mode
because each Javascript file ends up in its own `define(...)` line.
It will strip out any trailing whitespace and put the `sourceURL`
comment on the same line and everything seems to work.
group membership and `CategoryUser` notification level should be
respected to determine whether to notify staged users about activity in
private categories, instead of only ever generating notifications for staged
users' own topics (which has been the behaviour since
0c4ac2a7bc)
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
On some customer forums we are randomly getting a "You must select a valid user" error when sending a PM even when all parameters seem to be OK. This is an attempt to track it down with more data.
ReviewableScore#types extend the PostActionTypes with their own, storing the result inside a class variable. To avoid overwriting an existing flag, we need to calculate the next flag ID using these types instead of the PostAction ones. Since we first call the score types to calculate the id, this list gets memoized, leaving us with an outdated list.
To fix this, we now reload ReviewableScore#types after replacing flags.
Custom emoji, profile background, and card background were being set to secure, which we do not want as they are always in a public context and result in a 403 error from the ACL if linked directly.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
Some specs use psql to test database restores and dropping the table after the test needs to happen outside of rspec because of transactions. The previous attempt lead to some changes to be stored in the test database.
FIX: raised a proper NotFound exception when filtering groups by username with invalid username.
FIX: properly filter the groups based on current user visibility when viewing another user's groups.
DEV: Guardian.can_see_group?(group) is now using Guardian.can_see_groups(groups) instead of duplicating the same code.
FIX: spec for groups_controller#index when group directory is disabled for logged in user.
FIX: groups_controller.sortable specs to actually test all sorting combinations.
DEV: s/response_body/body/g for slightly shorter spec code.
FIX: rewrote the "view another user's groups" specs to test all group_visibility and members_group_visibility combinations.
DEV: Various refactoring for cleaner and more consistent code.
An archive containing lots of small files could trigger an error even though the amount of decompressed data was way below the maximum allowed size. This happened because the decompression algorithm used the chunk size for calculating the remaining size instead of the actual size of the decompressed chunk.
The QUnit rake task starts a server in test mode. We need a tweak to allow dynamic CSP hostnames in test mode. This tweak is already present in development mode.
To allow CSP to work, the browser host/port must match what the server sees. Therefore we need to disable the enforce_hostname middleware in test mode. To keep rspec and production as similar as possible, we skip enforce_hostname using an environment variable.
Also move the qunit rake task to use unicorn, for consistency with development and production.
* Add a rake task to disable secure media. This sets all uploads to `secure: false`, changes the upload ACL to public, and rebakes all the posts using the uploads to make sure they point to the correct URLs. This is in a transaction for each upload with the upload being updated the last step, so if the task fails it can be resumed.
* Also allow viewing media via the secure url if secure media is disabled, redirecting to the normal CDN url, because otherwise media links will be broken while we go and rebake all the posts + update ACLs
Previously we had the ability to download a simple .gz file
new changes mean we have a a tar.gz file that needs some levels
of fiddling to get extracted correctly
MaxMind now requires an account with a license key to download files.
Discourse admins can register for such an account at:
https://www.maxmind.com/en/geolite2/signup
License key generation is available in the profile section.
Once registered you can set the license key using `DISCOURSE_MAXMIND_LICENSE_KEY`
This amends it so we unconditionally skip MaxMind DB downloads if no license key exists.
Many security scanners ship invalid mime types, this ensures we return
a very cheap response to the clients and do not log anything.
Previous attempt still re-dispatched the request to get proper error page
but in this specific case we want no error page.
Added a fix to gracefully error with a Webauthn::SecurityKeyError if somehow a user provides an unkown COSE algorithm when logging in with a security key.
If `COSE::Algorithm.find` returns nil we now fail gracefully and log the algorithm used along with the user ID and the security key params for debugging, as this will help us find other common algorithms to implement for webauthn
This used to work due to side effects.
`rake parallel:migrate` used to work very inconsistently and would only migrate
some of the databases.
This introduces the recommended change to db.yml so the correct database is
found based off TEST_ENV_NUMBER if for some reason we did not set it using
RAILS_DB
Also avoids a bunch of schema dumping which is not needed when migrating
parallel specs
DB number 1 is very odd cause for whatever reason parallel spec is not
setting it.
- Refactor source_url to avoid using eval in development
- Precompile handlebars in development
- Include template compilers when running qunit
- Remove unsafe-eval in development CSP
- Include unsafe-eval only for qunit routes in development
- Ensure that the 'notify_moderators' flag is always the last flag when using custom flags.
- Support passign a custom FlagSettings object when replacing flags to reuse existing ones.
People rarely want to have their avatars show up as the preview image on social media platforms. Instead, we should fall back to the site opengraph image.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
Meta thread: https://meta.discourse.org/t/sending-a-pm-with-the-following-title-causes-an-error/135654/3
We had an issue where if someone sent a PM with crazy
characters that are stripped and we end up with only
a number, the topic redirect errored because the slug was
a number. so instead we return the default as well if
the slug is a number after prettification
According to the [Rails
Source](https://github.com/rails/rails/blob/master/activerecord/lib/active_record/railties/databases.rake#L20)
the `ActiveRecord::Migrator.migrations_paths` are overwritten with the
value of `ActiveRecord::Tasks::DatabaseTasks.migrations_paths` every
time the config is loaded.
This caused a bug for Discourse development where if you ran:
`rake db:drop db:create db:migrate` in one line, you would not get our
post migrations, as those had a custom value for `migrations_paths`.
The fix is to use `ActiveRecord::Tasks::DatabaseTasks.migrations_paths`
to set up all our custom paths. Everything seems to work as expected.
Adds a custom bookmark-clock icon to discourse-additional.svg for use with the new bookmarks with reminder functionality.
Also add some code to correctly refresh the post-stream icon for bookmark to show the clock after save.
Plugins can add it via API if they need to use `eval`:
```
extend_content_security_policy(script_src: [:unsafe_eval])
```
See https://meta.discourse.org/t/104243
API keys are now only visible when first created. After that, only the first four characters are stored in the database for identification, along with an sha256 hash of the full key. This makes key usage easier to audit, and ensures attackers would not have access to the live site in the event of a database leak.
This makes the merge lower risk, because we have some time to revert if needed. Once the change is confirmed to be working, we will add a second commit to drop the `key` column.
The following methods have long been deprecated in ruby due to flaws in their implementation per http://blade.nagaokaut.ac.jp/cgi-bin/vframe.rb/ruby/ruby-core/29293?29179-31097:
URI.escape
URI.unescape
URI.encode
URI.unencode
escape/encode are just aliases for one another. This PR uses the Addressable gem to replace these methods with its own encode, unencode, and encode_component methods where appropriate.
I have put all references to Addressable::URI here into the UrlHelper to keep them corralled in one place to make changes to this implementation easier.
Addressable is now also an explicit gem dependency.
Note: All of this functionality is hidden behind a hidden, default false, site setting called `enable_bookmarks_with_reminders`. Also, any feedback on Ember code would be greatly appreciated!
This is part 1 of the bookmark improvements. The next PR will address the backend logic to send reminder notifications for bookmarked posts to users. This PR adds the following functionality:
* We are adding a new `bookmarks` table and `Bookmark` model to make the bookmarks a first-class citizen and to allow attaching reminders to them.
* Posts now have a new button in their actions menu that has the icon of an actual book
* Clicking the button opens the new bookmark modal.
* Both name and the reminder type are optional.
* If you close the modal without doing anything, the bookmark is saved with no reminder.
* If you click the Cancel button, no bookmark is saved at all.
* All of the reminder type tiles are dynamic and the times they show will be based on your user timezone set in your profile (this should already be set for you).
* If for some reason a user does not have their timezone set they will not be able to set a reminder, but they will still be able to create a bookmark.
* A bookmark can be deleted by clicking on the book icon again which will be red if the post is bookmarked.
This PR does NOT do anything to migrate or change existing bookmarks in the form of `PostActions`, the two features live side-by-side here. Also this does nothing to the topic bookmarking.
This is required because bin/rake automatically loads plugins when migrating. In our continuous integration, we don't want plugins to break the core build. They should only be loaded for the plugin build.
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
Non UTF-8 user_agent requests were bypassing logging due to PG always
wanting UTF-8 strings.
This adds some conversion to ensure we are always dealing with UTF-8
`available_disk_space` calls `df` which exits with an error if the `uploads` path doesn't exist. That's often the case when the `Discourse.store.external?` is true.
By doing the `external?` check first the `disable_if_low_on_disk_space` does less work and doesn't output any errors to the console.
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
This bug was causing some unusual behavior when the last post is filtered (e.g. from an ignored user). In some situations this would cause suggested topics to be omitted from the payload.
The next_page specs have been updated to remove most of the stubs
* Support for custom messages and redirects when creating posts
When a post/topic is created Discourse serializes a `NewPostResult`
object. Normally this contains a status like `created_post` or
errors describing why the post could not be created.
There are times when a plugin might want to take the inputted post
and do something in the background. In this case, the plugin
can return a custom `message` and `route_to` attribute in the
`NewPostResult`.
If present, the message will be displayed in an alert, and when "Ok" is
clicked the user will be routed to the new URL.
* Destroy the draft in parallel
Note:
```
def foo(bar: 1)
end
foo({bar: 2})
# raises a deprecation, instead use:
foo(**{bar: 2})
```
Additionally when matching regexes always use strings. It does not make
sense to match a non string to a regex.
We already cache failed onebox URL requests client-side, we now want to cache this on the server-side for extra protection. failed onebox previews will be cached for 1 hour, and any more requests for that URL will fail with a 404 status. Forcing a rebake via the Rebake HTML action will delete the failed URL cache (like how the oneboxer preview cache is deleted).
If a user has more than 60 active sessions, the oldest sessions will be terminated automatically. This protects performance when logging in and when loading the list of recently used devices.
This is a bottom up rewrite of Discourse cache to support faster performance
and a limited surface area.
ActiveSupport::Cache::Store accepts many options we do not use, this partial
implementation only picks the bits out that we do use and want to support.
Additionally params are named which avoids typos such as "expires_at" vs "expires_in"
This also moves a few spots in Discourse to use Discourse.cache over setex
Performance of setex and Discourse.cache.write is similar.
Discourse.cache is a more consistent method to use and offers clean fallback
if you are skipping redis
This is part of a larger change that both optimizes Discoruse.cache and omits
use of setex on $redis in favor of consistently using discourse cache
Bench does reveal that use of Rails.cache and Discourse.cache is 1.25x slower
than redis.setex / get so a re-implementation will follow prior to porting
This amends our API so we provide it with the draft key when saving a post
this means post creator can clean up the draft consistently even if we are
doing fancy stuff like replying to a new topic or new pm or whatever.
There will be some followup work to clean it up so client never calls destroy
on draft during normal operation and the #create/#update endpoints takes care of it
every time
In `post_creator`, the ACL update is only necessary when uploads need to be secured.
This should fix a regression with S3 clones that do not support updating ACLs.
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
There was an issue on dev where when uploading secure media, the href of the media was correctly being replaced in the CookedPostProcessor, but the srcset urls were not being replaced correctly. This is because UrlHelper.cook_url was returning the asset host URL for the media for secure media instead of returning early with the proxied secure proxy url.
Previously our custom exception handler was unable to handle situations
where an invalid mime type was sent, resulting in a warning log
This ensures we pretend a request is HTML for the purpose of rendering
the error page if an invalid mime type from a scanner is shipped to the app
* FEATURE: Normalize the service worker route
Update cache headers so they are not immutable outside of the rails app
Add the ability to purge the service worker cache from localhost
Rails -> nginx will pass immutable flags so the file is cached until reloaded.
In most cases, nginx will have its cache flushed on rebuild (new image)
For those needing dynamic re-caching (such as upgrading via the UI),
a rake task for flushing the service worker script is provided
through `assets:flush_sw`
This is only defined in a console environment. For example:
```
[1] pry(main)> SiteSetting.info(:title)
=> {:resolved_value=>"Globally Overridden Title",
:default_value=>"Discourse",
:global_override=>"Globally Overridden Title",
:database_value=>"Test Discourse",
:refresh?=>false,
:client?=>true,
:secret?=>false}
```
* Abort CensoredWordsValidator early if censored_words_regexp nil. Sometimes censored_words_regex can end up nil, erroring the validator. This handles the nil condition and also adds a spec for the validator
The secure media functionality relied on `SiteSetting.enable_s3_uploads?` which, as we found in dev, did not take into account global S3 settings via `GlobalSetting.use_s3?`. We now use `SiteSetting.Upload.enable_s3_uploads` instead to be more consistent.
Also, we now validate `enable_s3_uploads` changes, because if `GlobalSetting.use_s3?` is true users should NOT be enabling S3 uploads manually.
We were having issues in development mode where the JS code had errors due to a bad cache. When starting a server in development mode in bin/unicorn we now get the git sha of the discourse HEAD and get a git sha of all plugins, and store them in a file. If the sha has changed then we delete tmp/cache to refresh the assets cache.
* Fix an issue where if an edit was made to a post with a reason provided, and then another edit was made with no reason, the original edit reason got wiped out
* We now always make a post revision (even with ninja edits) if an edit reason has been provided and it is different from the current edit reason
Co-Authored-By: Sam <sam.saffron@gmail.com>
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
For this to work we need to overwrite `db:rollback` in our Rakefile like
we do for migrate, so that it removes the load_config dependency. This
allows our custom migration paths to work.
This version hash is used for the filename, and so browsers/CDNs cache based on it. Previously the version hash was based only on the list of requested icons. This can cause issues in a couple of situations, most commonly when developing themes with custom icons:
- A requested icon does not exist, and then later is added to the theme. The bundle output changes, but the hash did not
- The SVG content of an icon changes, but the name of the icon does not. The bundle output changes, but the hash did not
* When viewing a tag, the search widget will now show a checkbox to scope the search by tag, which will limit search results to that tag on desktop and mobile
`FileUtils.cd` and `Dir.chdir` cause the working directory to change for the entire process. We run sidekiq jobs, hijacked requests and deferred jobs in threads, which can make working directory changes have unintended side-effects.
- Add a rubocop rule to warn about usage of Dir.chdir and FileUtils.cd
- Added rubocop:disable for scripts used outside the app
- Refactored code using cd to use alternative methods
- Temporarily skipped the rubocop check for lib/backup_restore. This will require more complex refactoring, so I will create a separate PR for review
This method had grown into a monster. Its query had bugs
that I couldn't fix, and new features would be hard to add.
Also I don't understand how it all works anymore...
Replace it with common table expressions that can be queried
to generate the results we need, instead of subtracting
results using lots of "NOT IN" clauses.
Fixed are bugs with tag schemas that use combinations of
tag groups, parent tags, and one-tag-per-topic restrictions.
For example: https://meta.discourse.org/t/130991/6
Previously we were always hard-coding expiry, this allows the secure session
to correctly handle custom expiry times
Also adds a ttl method for looking up time to live
Previous versions of the mail-receiver used query based api credentials,
if we detect this we will show a message in the admin panel to update
the mail receiver.
Sam Saffron
Jeff Wong
Martin Brennan
Gerhard Schlager
Neil Lalonde
spirobel
Joffrey JAFFEUX
Roman Rizzi
Arpit Jalan
Martin Brennan
David Taylor
Robin Ward
Dan Ungureanu
Penar Musaraj
Mark VanLandingham
Vinoth Kannan
Jarek Radosz
Blake Erickson
Régis Hanol
Matt Marjanović
Daniel Waterworth
adam j hartz
Rafael dos Santos Silva
Krzysztof Kotlarek
mintsaxon
Leo McArdle
Vinoth Kannan
Bianca Nenciu
Kris
Hector Bustillos
Simon Cossar
Jay Pfaffman