This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
It returned a 429 error code with a 'Retry-After' header if a
RateLimiter::LimitExceeded was raised and unhandled, but the header was
missing if the request was limited in the 'RequestTracker' middleware.
This PR adds functionality for the IMAP sync code to detect if a UID that is missing from the mail group mailbox is in the Spam/Junk folder for the mail account, and if so delete the associated Discourse topic. This is identical to what we do for emails that are moved for Trash.
If an email is missing but not in Spam or Trash, then we mark the incoming email record with imap_missing: true. This may be used in future to further filter or identify these emails, and perhaps go hunting for them in the email account in bulk.
Note: This adds some code duplication because the trash and spam email detection and handling is very similar. I intend to do more refactors/improvements to the IMAP sync code in time because there is a lot of room for improvement.
If the sliding window size is N seconds, then a moment at the Nth second
should be considered as the moment outside of the sliding window.
Otherwise, if the sliding window is already full, at the Nth second,
a new call wouldn't be allowed, but a time to wait before the next call
would be equal to zero, which is confusing.
In other words, the end of the time range shouldn't be included in the
sliding window.
Let's say we start at the second 0, and the sliding window size is 10
seconds. In the current version of rate limiter, this sliding window will
be considered as a time range [0, 10] (including the end of the range),
which actually is 11 seconds in length.
After this fix, the time range will be considered as [0, 10)
(excluding the end of the range), which is exactly 10 seconds in length.
* DEV: TopicTrackingState calls should happen in the background
It was observed that calling TopicTrackingState on popular topics could result in a large number of calls to redis, resulting in slow response times when posting replies.
These calls should be moved to a background job.
* DEV: PostUpdateTopicTrackingState should execute on default queue
* FIX: Inline onebox should use encoding from Content-Type header when present
* Use Regexp.last_match(1)
Signed-off-by: OsamaSayegh <asooomaasoooma90@gmail.com>
- Only initialize the S3Helper when needed
- Skip initializing the S3Helper for S3Store#cdn_url
- Allow cook_url to be passed a `local` hint to skip unnecessary checks
Final sigma is not lower cased correctly in Ruby causing issues with routing.
This works around the issue by downcasing all usernames containing a sigma using JS.
You can now use `@me` to search for posts created by yourself, this is particularly handy if you have a long username.
`@me rainbow` will find all posts you created with the word rainbow.
Also cleans up test suite so it has no warnings.
`/srv/status` routes should not be cached at all. Also, we want to
decouple the route from Redis which `AnonymouseCache` relies on. The
`/srv/status` should continue to return a success response even if Redis
is down.
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
It used to insert block Oneboxes inside paragraphs which resulted in
invalid HTML. This needed an additional parsing for removal of empty
paragraphs and the resulting HTML could still be invalid.
This commit ensure that block Oneboxes are inserted correctly, by
splitting the paragraph containing the link and putting the block
between the two. Paragraphs left with nothing but whitespaces will
be removed.
Follow up to 7f3a30d79f.
* DEV: More robust processing of URLs
The previous `UrlHelper.encode_component(CGI.unescapeHTML(UrlHelper.unencode(uri))` method would naively process URLs, which could result in a badly formed response.
`Addressable::URI.normalized_encode(uri)` appears to deal with these edge-cases in a more robust way.
* DEV: onebox should use UrlHelper
* DEV: fix spec
* DEV: Escape output when rendering local links
You can let non-staff users use shared drafts by modifying the `shared_drafts_min_trust_level` site setting. These users must have access to the shared draft category.
If a category and a sub-category have the same slug, adding a background to one of them will also show it on the other one. This was introduced in 8e3f667 to fix a discrepancy, which was later fixed in 214b4c3.
When calculating whether the attached uploads went over the SiteSetting.email_total_attachment_size_limit_kb.kilobytes limit, we were using the original_upload for the calculation instead of the actually attached_upload, which will be smaller in most cases because it can be an optimized image.
This adds a new min_trust_level_to_allow_ignore site setting that enables admins to control the point at which a user is allowed to ignore other users.
* FEATURE: display error if Oneboxing fails due to HTTP error
- display warning if onebox URL is unresolvable
- display warning if attributes are missing
* FEATURE: Use new Instagram oEmbed endpoint if access token is configured
Instagram requires an Access Token to access their oEmbed endpoint. The requirements (from https://developers.facebook.com/docs/instagram/oembed/) are as follows:
- a Facebook Developer account, which you can create at developers.facebook.com
- a registered Facebook app
- the oEmbed Product added to the app
- an Access Token
- The Facebook app must be in Live Mode
The generated Access Token, once added to SiteSetting.facebook_app_access_token, will be passed to onebox. Onebox can then use this token to access the oEmbed endpoint to generate a onebox for Instagram.
* DEV: update user agent string
* DEV: don’t do HEAD requests against news.yahoo.com
* DEV: Bump onebox version from 2.1.5 to 2.1.6
* DEV: Avoid re-reading templates
* DEV: Tweaks to onebox mustache templates
* DEV: simplified error message for missing onebox data
* Apply suggestions from code review
Co-authored-by: Gerhard Schlager <mail@gerhard-schlager.at>
* FIX: Store Reviewable's force_review as a boolean.
Using the `force_review` flag raises the score to hit the minimum visibility threshold. This strategy turned out to be ineffective on sites with a high number of flags, where these values could rapidly fluctuate.
This change adds a `force_review` column on the reviewables table and modifies the `Reviewable#list_for` method to show these items when passing the `status: :pending` option, even if the score is not high enough. ReviewableQueuedPosts and ReviewableUsers are always created using this option.
CookedPostProcessor replaces all large images with their optimized
versions, but for GIF images the optimized version is limited to first
frame only. This caused animations it cooked posts to require a click
to show up the lightbox and start playing.
It used to simply say "title is invalid" without giving any hint what
the problem could be. This commit adds different errors messages for
all caps titles, low entropy titles or titles with very long words.
We updated version of moment and moment-timezone as our current versions are outdated making Discourse Dates broken on places where timezone had updates, like here in Brazil.
This also update highlightJS to the latest version and corrected a test that relied on a no longer supported locale in
moment.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
PostDestroyer should accept the option to permanently destroy post from the database. In addition, when the first post is destroyed it destroys the whole topic.
Currently, that feature is limited to private messages and creator of the post. It will be used by discourse-encrypt to explode encrypted private messages.
When embedding secure images which have been oneboxed, we checked to see if the image's parent's parent had the class onebox-body. This was not always effective as if the image does not get resized/optimized then it does not have the aspect-image div wrapping it. This would cause the image to embed in the email but be huge.
This PR changes the check to see if any of the image's ancestors have the class onebox-body, or if the image has the onebox-avatar class to account for variations in HTML structure.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Previous to this change our anonymous rate limits acted as a throttle.
New implementation means we now also consider rate limited requests towards
the limit.
This means that if an anonymous user is hammering the server it will not be
able to get any requests through until it subsides with traffic.
A site owner attempting to use both the email_subject site setting and translation overrides for normal post notification
email subjects would find themselves frusturated at the lack of template argument parity.
Make all the variables available for translation overrides by adding the subject variables to the custom interpolation keys list and applying them.
Reported at https://meta.discourse.org/t/customize-subject-format-for-standard-emails/20801/47?u=riking
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
We had an issue where onebox thumbnail was too large and thus was optimized, and we are using the image URLs in post to redact and re-embed, based on the sha1 in the URL. Optimized image URLs have extra stuff on the end like _99x99 so we were not parsing out the sha1 correctly. Another issue I found was for posts that have giant images, the original was being used to embed in the email and thus would basically never get included because it is huge.
For example the URL 787b17ea61_2_690x335.jpeg was not parsed correctly; we would end up with 787b17ea6140f4f022eb7f1509a692f2873cfe35_2_690x335.jpeg as the sha1 which would not find the image to re-embed that was already attached to the email.
This fix will use the first optimized image of the detected upload when we are redacting and then re-embedding to make sure we are not sending giant things in email. Also, I detect if it is a onebox thumbnail or the site icon and force appropriate sizes and styles.
* FEATURE: allow category group moderators to edit posts
If the `enable_category_group_moderation` SiteSetting is enabled, posts should be editable by those belonging to the appropraite groups.
`max-width: 50%; max-height: 400px;` is a good fallback, however, if width and height are given and are smaller than fallback - we should persist that smaller size.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
Now that we have support for user-selectable color schemes, it makes sense
to simplify seeding and theme updates in the wizard.
We now:
- seed only one theme, named "Default" (previously "Light")
- seed a user-selectable Dark color scheme
- rename the "Themes" wizard step to "Colors"
- update the default theme's color scheme if a default is set
(a new theme is created if there is no default)
When the server gets overloaded and lots of requests start queuing server
will attempt to shed load by returning 429 errors on background requests.
The client can flag a request as background by setting the header:
`Discourse-Background` to `true`
Out-of-the-box we shed load when the queue time goes above 0.5 seconds.
The only request we shed at the moment is the request to load up a new post
when someone posts to a topic.
We can extend this as we go with a more general pattern on the client.
Previous to this change, rate limiting would "break" the post stream which
would make suggested topics vanish and users would have to scroll the page
to see more posts in the topic.
Server needs this protection for cases where tons of clients are navigated
to a topic and a new post is made. This can lead to a self inflicted denial
of service if enough clients are viewing the topic.
Due to the internal security design of Discourse it is hard for a large
number of clients to share a channel where we would pass the full post body
via the message bus.
It also renames (and deprecates) triggerNewPostInStream to triggerNewPostsInStream
This allows us to load a batch of new posts cleanly, so the controller can
keep track of a backlog
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
A follow-up to a follow-up. (6932a373a3 and 572da7a57b)
Our `discourse_test` Docker image uses git 2.20.1 released on Dec 15, 2018. It does not support `git branch --show-current`. (it was added in 2.22.0)
Previously, any errors in those files would e.g. blow up the update process in docker_manager.
Now it prints out an error and proceeds as if there was no compatibility file.
Includes:
* DEV: Extract setup_git_repo
* DEV: Use `Dir.mktmpdir`
* DEV: Default to `main` branch (The latest versions of git already do this, so to avoid problems do this by default)
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
See https://meta.discourse.org/t/email-address-change-confirmation-email-not-sent-but-every-other-notification-emails-are/165358
In short: with disable emails set to non-staff, email address change confirmation emails (those sent to the new address) are not sent for staff or admin members.
This was happening because we were looking up the staff user with the to_address of the email, but the to address was the new email address because we are sending a confirm email change email, and thus the user could not be found. We didn't need to do this anyway because we are passing the user into the Email::Sender class anyway.
When that site setting is enabled, the category counts (new/unread)
include the subcategory definition topics, but the topics aren't included
in the list. This fixes that discrepancy.
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
Allows site administrators to pick different fonts for headings in the wizard and in their site settings. Also correctly displays the header logos in wizard previews.
Upload.secure_media_url? raised an exceptions when the URL was invalid,
which was a issue in some situations where secure media URLs must be
removed.
For example, sending digests used PrettyText.strip_secure_media,
which used Upload.secure_media_url? to replace secure media with
placeholders. If the URL was invalid, then an exception would be raised
and left unhandled.
Now instead in UrlHelper.rails_route_from_url we return nil if there is something wrong with the URL.
Co-authored-by: Bianca Nenciu <nenciu.bianca@gmail.com>
Martin Brennan
Robert
Penar Musaraj
Joffrey JAFFEUX
Régis Hanol
Robin Ward
Gerhard Schlager
Dan Ungureanu
Andrew Prigorshnev
Bianca Nenciu
jbrw
Krzysztof Kotlarek
Arpit Jalan
Roman Rizzi
Osama Sayegh
David Taylor
Sam
Daniel Waterworth
Guo Xiang Tan
Alan Guo Xiang Tan
tshenry
Rafael dos Santos Silva
Kane York
Vinoth Kannan
Jahan Gagan
Jarek Radosz