Previously, PM only tags were being routed to the public topic list with
the tag added as a filter. However, the public topic list does not fetch
PMs and hence PM only tags did not provide any value when added to the
Sidebar. This commit changes that by allowing the client to
differentiate PM only tag and thus routes the link to the PM tags show
route.
Counts for PM only tags section links are not supported as of this
commit and will be added in a follow up commit.
As part of this commit, a bug where updating a tag's notification level on the server side does not update the state of the user's tag notification levels on the client side is fixed too.
Configuring staged users to watch categories and tags is a way to sign
them up to get many emails. These emails may be unwanted and get marked
as spam, hurting the site's email deliverability.
Users can opt-in to email notifications by logging on to their
account and configuring their own preferences.
If staff need to be able to configure these preferences on behalf of
staged users, the "allow changing staged user tracking" site setting
can be enabled. Default is to not allow it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This is a recent regression introduced by https://github.com/discourse/discourse/pull/12937 which makes it so that when looking at a user profile that is not your own, specifically the category and tag notification settings, you would see your own settings instead of the target user. This is only a problem for admins because regular users cannot see these details for other users.
The issue was that we were using `scope` in the serializer, which refers to the current user, rather than using a scope for the target user via `Guardian.new(user)`.
However, on further inspection the `notification_levels_for` method for `TagUser` and `CategoryUser` did not actually need to be accepting an instance of Guardian, all that it was using it for was to check guardian.anonymous? which is just a fancy way of saying user.blank?. Changed this method to just accept a user instead and send the user in from the serializer.
The user may have changed their category or tag tracking settings since a topic was tracked/watched based on those settings in the past. In that case we need to alter the reason message we show them otherwise it is very confusing for the end user to be told they are tracking a topic because of a category, when they are no longer tracking that category.
For example: "You will see a count of new replies because you are tracking this category." becomes: "You will see a count of new replies because you were tracking this category in the past."
To do this, it was necessary to add tag and category tracking info to current user serializer. I improved the serializer code so it only does 3 SQL queries instead of 9 to get the tracking information for tags and categories for the current user.
If the "use_site_small_logo_as_system_avatar" setting is enabled, the site's small logo is displayed as the selected option by the avatar-selector. Choosing a different avatar disables the setting.
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
Moderators should not be able to see `UserSerializer#group_users` and `UserSerializer#second_factor_enabled` of other users.
Impact of leaking this is low because the information leaked is not
exploitable.
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
Adds a new route `/u/{username}/card.json`, which has a reduced number of fields. This change is behind a hidden site setting, so we can test compatibility before rolling out.
* DEV: Remove unused omit_stats variable from user serializer
This was hard-coded to true in a8b5192efd, and is no longer used anywhere
* Remove attribute declarations
* If a staff user created only a security key as their single 2FA option. they continued to be prompted to create a 2FA option because we only considered this condition satisfied if a TOTP was added.
* The condition is now satisfied if TOTP OR security keys are enabled.
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
This reverts commit 1fbe078ae0.
`UserProfile` is created in a callback after the user has been created.
As such, it should be impossible for a user to not have a blank
`UserProfile`. This was also improved in
4f5c9bb8d3.
Apparently is is possible to have a user without a user_profile. This
fix will return nil for any user_profile fields during serialization
(like the after delete web hook) instead of blowing up.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
* FEATURE: Add ignored user list to the User's preference page
## Why?
Part of: https://meta.discourse.org/t/ability-to-ignore-a-user/110254
We want to add list of Ignored users under or along with the muted users preferences section.
This way Users can find and update their list of ignored users.
## UI
## Open questions
Two of many options to represent a list of ignored users is that we can:
1. We can represent the ignored user list as a table with the ability to `un-ignore` but NOT to add new ignored users.
2. We can keep it functioning as the `muted user list` where you can `un-ignore` or `ignore` users.
* FEATURE: Added MaxMindDb to resolve IP information.
* FEATURE: Added browser detection based on user agent.
* FEATURE: Added recently used devices in user preferences.
* DEV: Added acceptance test for recently used devices.
* UX: Do not show 'Show more' button if there aren't more tokens.
* DEV: Fix unit tests.
* DEV: Make changes after code review.
* Add more detailed unit tests.
* Improve logging messages.
* Minor coding style fixes.
* DEV: Use DropdownSelectBoxComponent and run Prettier.
* DEV: Fix unit tests.
* `rescue nil` is a really bad pattern to use in our code base.
We should rescue errors that we expect the code to throw and
not rescue everything because we're unsure of what errors the
code would throw. This would reduce the amount of pain we face
when debugging why something isn't working as expexted. I've
been bitten countless of times by errors being swallowed as a
result during debugging sessions.
Alan Guo Xiang Tan
Neil Lalonde
Martin Brennan
Roman Rizzi
David Taylor
Mark VanLandingham
Vinoth Kannan
jahan-ggn
Blake Erickson
Krzysztof Kotlarek
mentalstring
Martin Brennan
Vinoth Kannan
Guo Xiang Tan
Sam Saffron
Tarek Khalil
Bianca Nenciu
Gerhard Schlager
Régis Hanol
Maja Komel
Simon Cossar
