Commit Graph

255 Commits

Author SHA1 Message Date
Roman Rizzi 58b135d6d3
DEV:Using symbols is deprecated, use strings instead (#17874) 2022-08-11 11:33:41 -03:00
Roman Rizzi f1c3670d74
FIX: Publish membership update events when refreshing automatic groups. (#17668)
Adding or removing users from automatic groups is now consistent with `Group#add` and `Group#remove`.
2022-07-27 11:34:08 -03:00
Vinoth Kannan 90c969c90f
DEV: remove `automatic_membership_retroactive` column from group model. (#17212)
The column is already dropped from the database table.
2022-07-26 21:26:22 +05:30
Jarek Radosz 0d3cf3333a
DEV: Add secondary sort to `Group.visible_groups` (#17659)
Fix a flaky group controller spec and makes the API responses more stable.
2022-07-26 02:13:38 +02:00
Bianca Nenciu 9db8f00b3d
FEATURE: Create upload_references table (#16146)
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.

* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
2022-06-09 09:24:30 +10:00
Gerhard Schlager b7230d14a3 REFACTOR: Add `full_url` to `Group`
Lets stop writing the same code over and over again.
2022-04-14 11:53:57 +02:00
Alan Guo Xiang Tan e7c3d01aaa
DEV: Restore order assertion in category serializer tests. (#16344)
Our group fabrication creates groups with name "my_group_#{n}" where n
is the sequence number of the group being created. However, this can
cause the test to be flaky if and when a group with name `my_group_10`
is created as it will be ordered before
`my_group_9`. This commits makes the group names determinstic to
eliminate any flakiness.

This reverts commit 558bc6b746.
2022-04-01 08:58:06 +08:00
Sam 3bf5692c72
FEATURE: prioritize group search order based on prefix match (#16093)
Our @mention user search prioritized users based on prefix matches.

So if searching for `sa` we will display `sam`, `asam` in that order

Previously, we did not prioritize group matches based on prefix. This change ensures better parity.

Implementation notes:

1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.

Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
2022-03-03 16:57:52 +11:00
Martin Brennan 0a738bd5bc
FEATURE: Allow sending group SMTP emails with from alias (#15687)
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
2022-02-07 13:52:01 +10:00
Martin Brennan 20fe5eceb8
FEATURE: Scheduled group email credential problem check (#15396)
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.

This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.

The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
2022-01-04 10:14:33 +10:00
Angus McLeod df3886d6e5
FEATURE: Experimental support for group membership via google auth (#14835)
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI. 

The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.

https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
2021-12-09 12:30:27 +00:00
Daniel Waterworth 4724f3cbf7
DEV: Remove deprecated method (#14902) 2021-11-12 09:07:44 -06:00
Vinoth Kannan deee715a2c
FIX: update flair group of all members if primary group setting changed. (#14762)
Previously, if we enable the `primary_group` setting on a group then the `flair_group_id` of its' members are not affected.
2021-10-28 22:56:44 +05:30
Vinoth Kannan 28be284b27
FIX: use active record `update_attribute` instead of mini sql. (#14367)
* DEV: use active record `save!` instead of mini sql.

The "save" method will trigger the before_save callback "match_primary_group_changes" for User model. Else `flair_group_id` won't be removed from the user.

* check whether the method `match_primary_group_changes` called or not.
2021-09-21 09:29:12 +08:00
Krzysztof Kotlarek e3793e6d7c
FIX: better filter for groups search (#14262)
Follow up of https://github.com/discourse/discourse/pull/14216

Allow plugins to register custom filter with block
2021-09-08 09:38:45 +10:00
Krzysztof Kotlarek f859fd6bde
FEATURE: allow plugins to extend Groups (#14216)
* add_permitted_group_param API for plugins
* add groups-interaction-custom-options outlet
* custom search can use custom group scope
2021-09-06 10:18:51 +10:00
Arpit Jalan 3006de39d1
REVERT "FIX: do not show private group flair on user avatars" (#13991)
This reverts commit fe3e18f981 and 0d8fd9ace6
2021-08-10 17:25:11 +05:30
Arpit Jalan 0d8fd9ace6
FIX: do not show flair bg color if flair is not visible (#13969)
follow up to fe3e18f981
2021-08-06 20:53:23 +05:30
Vinoth Kannan 1da0aa838f
FIX: use `update_attribute` method to trigger callbacks. (#13930)
Group flair is not removed while removing a user from the group since the `before_save` callback methods are not triggered while using the `update_columns` method.
2021-08-04 11:54:46 +05:30
Arpit Jalan fe3e18f981
FIX: do not show private group flair on user avatars (#13872)
Meta ref: https://meta.discourse.org/t/visible-flair-for-invisible-groups-is-that-on-purpose/167674
2021-08-02 06:21:00 +05:30
Gerhard Schlager 6805cc287e FIX: Allow uppercase letters in automatic group names
`User.username_exists?` always converts to lowercase during lookup, so this change should be safe.
2021-07-13 20:29:07 +02:00
Martin Brennan d3e27cabf6
FIX: Improve participant display in group SMTP emails (#13539)
This PR makes several changes to the group SMTP email contents to make it look more like a support inbox message.

* Remove the context posts, they only add clutter to the email and replies
* Display email addresses of staged users instead of odd generated usernames
* Add a "please reply above this line" message to sent emails
2021-06-28 10:42:06 +10:00
Martin Brennan 6bf97a47a7
FEATURE: Add last updated details to SMTP/IMAP group settings UI (#13396)
Adds the last updated at and by SMTP/IMAP fields to the UI, we were already storing them in the DB. Also makes sure that `imap_mailbox_name` being changed makes the last_updated_at/by field update for IMAP.
2021-06-17 08:21:06 +10:00
Martin Brennan eb2c399445
FEATURE: Use group SMTP settings for sending user notification emails (initial) (#13220)
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:

* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things

The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.

Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.

#### Note

This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.

There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
2021-06-03 14:47:32 +10:00
Joffrey JAFFEUX 624edac3bb
DEV: calls user_added_to_group on group/TL enforcement (#13222) 2021-06-01 10:34:41 +02:00
Martin Brennan 964da21817
FEATURE: Improve group email settings UI (#13083)
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.

### UI

Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.

You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.

If there is an issue with the configuration or credentials a meaningful error message should be shown.

IMAP settings must also be validated when IMAP is enabled, before saving.

When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):

### Database & Backend

This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.

For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.

There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
2021-05-28 09:28:18 +10:00
Vinoth Kannan 26d7eedf4c
FEATURE: trigger webhook when a user added/removed in a group. (#12653)
Whenever a group is added or removed from a group a webhook event will get triggered if it's active.
2021-04-08 21:16:34 +05:30
David Taylor 38e7fe2770
FIX: Ensure group flair upload is present when deciding type (#12650)
Previously, if the upload_id was present, but the upload was missing, the entire site would give a server error.

We have no foreign keys on this relation, so we have to be able to cope with the situation where the upload_id is present, but the actual upload has been deleted.

Co-authored-by: Jarek Radosz <jradosz@gmail.com>
2021-04-08 15:54:09 +01:00
Rafael dos Santos Silva d86cb7d1c3
FIX: Use the S3 CDN for the Group flair (#12130) 2021-02-18 17:24:44 -03:00
Martin Brennan 4af4d36175
FIX: IMAP allow unknown senders to reply to group topics via email (#11877)
Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:

* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users

Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
2021-01-29 09:59:10 +10:00
Vinoth Kannan 872f3e6934
UX: warn about messages to be orphaned while deleting a group. (#11727)
Currently, after destroying a group its messages are inaccessible to everyone. Only admins can access using direct URLs.
2021-01-22 03:29:34 +05:30
Robin Ward a51a06115a FIX: Posts with Staff Colors were excluded from the group activity
Now they are included, with the correct color applied.
2020-12-11 11:52:03 -05:00
Bianca Nenciu ed52577e1c
FIX: Group#flair_url must be a real URL (#11400)
It used to be a short URL, but that did not work with the lightbox
in {{image-uploader}}.
2020-12-07 13:35:41 +02:00
Martin Brennan 632942e697
FIX: Ensure group SMTP and message builder always uses from address for Reply-To when IMAP is enabled (#11037)
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.

However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.

This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:

if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
  raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
2020-10-28 07:01:58 +10:00
Vinoth Kannan 9e4ed03b8f FEATURE: moderators allowed to view groups which members can see.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.

This reverts commit 7fc7090. And fixed the spec test fails.
2020-09-11 08:20:13 +05:30
Guo Xiang Tan 7fc70900d2
Revert "FEATURE: moderators allowed to view groups which members can see."
Build is broken.

This reverts commit 2bf0c4188b.
2020-09-11 10:04:54 +08:00
Vinoth Kannan 2bf0c4188b FEATURE: moderators allowed to view groups which members can see.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
2020-09-11 03:33:44 +05:30
Gerhard Schlager 31c1d57228
FIX: System message wasn't fully translatable 2020-09-02 15:24:25 +02:00
Martin Brennan 4670b62969
DEV: IMAP log to database (#10435)
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.

Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
2020-08-14 12:01:31 +10:00
Neil Lalonde d65a839577
FEATURE: allow group membership to unmute categories and tags
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
2020-08-13 17:20:53 -04:00
Neil Lalonde 1ca81fbb95
FEATURE: set notification levels when added to a group (#10378)
* FEATURE: set notification levels when added to a group

This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
2020-08-06 12:27:27 -04:00
Mark VanLandingham b76731d722
FEATURE: Invite emails to groups from add member modal (#10308) 2020-08-04 10:02:01 -05:00
Martin Brennan 5a3494b1e1
FIX: IMAP archive fix and group list mailbox code unification (#10355)
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
2020-08-04 14:19:57 +10:00
Arpit Jalan ba57dc57cc DEV: use group_ids instead of group_names in invite params 2020-07-13 17:37:04 +05:30
Dan Ungureanu c72bc27888
FEATURE: Implement support for IMAP and SMTP email protocols. (#8301)
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
2020-07-10 12:05:55 +03:00
Guo Xiang Tan 2fbd4eb11f
DEV: Remove double query in `Group#remove_review_group`.
Probably a mistake during commit.
2020-06-12 10:14:45 +08:00
Vinoth Kannan 0f20a6f0aa FIX: use `short_path` of flair upload to get signed url for secure media.
If we use `upload.url` for secure urls then the images won't render.
2020-06-05 07:43:15 +05:30
Arpit Jalan 2152e70e0d DEV: annotate models 2020-05-27 19:05:24 +05:30
Bianca Nenciu f47400475e
FEATURE: Send a private message when a group membership is accepted (#9822)
* FEATURE: Send a private message when a group membership is accepted

* DEV: Small code improvements

* FIX: Send PM as group owner

* Copy edits
2020-05-26 16:28:03 +03:00
Osama Sayegh 2211581a85
FIX: Don't responde with error 500 if domain is invalid when adding automatic membership domain (#9655) 2020-05-26 15:40:09 +10:00