Previously we would issue a 403 for all invalid routes under `/tags/c/...`, which is not semantically correct. In some cases, these 403'd routes would then be handled successfully in the Ember app, leading to some very confusing behavior.
* DEV: Allow params to be passed on topic redirects
There are several places where we redirect a url to a standard topic url
like `/t/:slug/:topic_id` but we weren't always passing query parameters
to the new url.
This change allows a few more query params to be included on the
redirect. The new params that are permitted are page, print, and
filter_top_level_replies. Any new params will need to be specified.
This also prevents the odd trailing empty page param that would
sometimes appear on a redirect. `/t/:slug/:id.json?page=`
* rubocop: fix missing space after comma
* fix another page= reference
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
* DEV: Deprecate /posts/:id/reply-ids/all
It was added in ed4c0c4a63 and its only use was removed in b58867b6e9
Nothing in all-the* seems to be using this endpoint.
* Update app/controllers/posts_controller.rb
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The `blocked onebox domains` setting lets site owners change what sites
are allowed to be oneboxed. When a link is entered into a post,
Discourse checks the domain of the link against that setting and blocks
the onebox if the domain is blocked. But if there's a chain of
redirects, then only the final destination website is checked against
the site setting.
This commit amends that behavior so that every website in the redirect
chain is checked against the site setting, and if anything is blocked
the original link doesn't onebox at all in the post. The
`Discourse-No-Onebox` header is also checked in every response and the
onebox is blocked if the header is set to "1".
Additionally, Discourse will now include the `Discourse-No-Onebox`
header with every response if the site requires login to access content.
This is done to signal to a Discourse instance that it shouldn't attempt
to onebox other Discourse instances if they're login-only. Non-Discourse
websites can also use include that header if they don't wish to have
Discourse onebox their content.
Internal ticket: t59305.
Previously, if an admin user tried to add/remove
users to another user's ignored list, it would
be added to their own ignore list because the
controller used current_user. Now for admins only
a source_user_id parameter can be passed through,
which will be used to ignore the target user for
that source user.
When creating files with create-multipart, if the file
size was somehow zero we were showing a very unhelpful
error message to the user. Now we show a nicer message,
and proactively don't call the API if we know the file
size is 0 bytes in JS, along with extra console logging
to help with debugging.
This PR adds an extra description to the 2FA page when granting a user admin access. It also introduces a general system for adding customized descriptions that can be used by future actions.
(Follow-up to dd6ec65061)
Discourse users and associated accounts are created or updated when a
user logins or connects the account using their account preferences.
This new API can be used to create associated accounts and users too,
if necessary.
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This feature was rarely used, could be used for spamming users and was
impossible to add a context to why the user was notified of a topic. A
simple private messages that includes the link and personalized message
can be used instead.
* DEV: Show only top level replies
Adds a new query param to the topic view so that we can filter out posts
that aren't top level replies. If a post is a reply to another post
instead of the original topic post we should not include it in the
response if the `filter_top_level_replies` query param is present.
* add rspec test
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
Currently, providing things like `filter[%24acunetix]=1` to
`UserActionsController#index` will throw an exception because instead of
getting a string as expected, we get a hash instead.
This patch simply uses `#permit` from strong parameters properly: first
we apply it on the whole parameters, this way it filters the keys we’re
interested in. By doing this, if the value is a hash for example, the
whole key/value pair will be ignored completely.
This commit handles the edge case where a draft is lost with no warnings if the user edits the title (or category/tags) of a topic while they're replying.to the same topic. Repro steps are as follows:
1. Start replying to a topic and type enough to get a draft saved.
2. Scroll up to the topic title and click the pencil icon next to the topic title, change the title, category and/or tags, and then save the changes.
3. Reload the page and you'll see that the draft is gone.
This happens because we only allow 1 draft per topic per user and when you edit the title of a topic that you're replying to, from the server perspective it'll look like as if you've submitted your reply so it will advance the draft sequence for the topic and delete the draft.
The fix in this commit makes `PostRevisor` skip advancing the draft sequence when a topic's title is edited using the pencil button next to the title.
Internal ticket: t60854.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
We serve `service-worker.js` in an unusual way, which means that the sourcemap is not available on an adjacent path. This means that the browser fails to fetch the map, and shows an error in the console.
This commit re-writes the source map reference in the static_controller to be an absolute link to the asset (including the appropriate CDN, if enabled), and adds a spec for the behavior.
It's important to do this at runtime, rather than JS precompile time, so that changes to CDN configuration do not require re-compilation to take effect.
This adds logic to increase an `InvitedUser` record, increase
`redemption_count` and create a `:invitee_accepted` to let the inviter
know that the invitee used the invite.
Initial support for this was implemented in commit 9969631.
Sorting group members worked always kept the group owners at the top of
the list. This commit keeps the group owners at the top of the list only
when no order exists.
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This can be disabled by setting `EMBER_CLI_PROD_ASSETS=0`, but this option will not be available for long. If your theme/plugin/site has issues under Ember CLI, please open a topic on https://meta.discourse.org
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Job arguments go via JSON, and so symbols will appear as strings in the Job's `#execute` method. The latest version of Sidekiq has started warning about this to reduce developer confusion.
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
When the record is not saved, we should display a proper message.
One potential reason can be plugins for example discourse-calendar is specifying that only first post can contain event
* FIX: Remove svg icons from webmanifest shortcuts
While SVGs are valid in the webmanifest, Chromium has not implemented
support for it in this specific manifest member.
Revert when https://bugs.chromium.org/p/chromium/issues/detail?id=1091612
lands.
* fix test
When staff visits the user profile of another user, the `email` field
in the model is empty. In this case, staff cannot send the reset email
password because nothing is passed in the `login` field.
This commit changes the behavior for staff users to allow resetting
password by username instead.
The UI used to request a password reset by username when the user was
logged in. This did not work when hide_email_already_taken site setting
was enabled, which disables the lookup-by-username functionality.
This commit also introduces a check to ensure that the parameter is an
email when hide_email_already_taken is enabled as the single allowed
type is email (no usernames are allowed).
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
* FEATURE: Export topics to markdown
The route `/raw/TOPIC_ID` will now export whole topics (paginated to 100
posts) in a markdown format.
See https://meta.discourse.org/t/-/152185/12
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
The new warnings cover more cases and more accurate. Most of the
warnings will be visible only to staff members because otherwise they
would leak information about user's preferences.
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
- switches to a raster image QR code so it can be long-pressed (or right
clicked) and added to iCloud keychain
- adds `autocomplete="one-time-code"` to the 2FA input for better
discoverability
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
* FEATURE: hide_email_address_taken forces use of email in forgot password form
This strengthens this site setting which is meant to be used to harden sites
that are experiencing abuse on forgot password routes.
Previously we would only deny letting people know if forgot password worked on not
New change also bans usage of username for forgot password when enabled
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
A plugin API that allows customizing existing topic-backed static pages, like:
faq, tos, privacy (see: StaticController) The block passed to this
method has to return a SiteSetting name that contains a topic id.
```
add_topic_static_page("faq") do |controller|
current_user&.locale == "pl" ? "polish_faq_topic_id" : "faq_topic_id"
end
```
You can also add new pages in a plugin, but remember to add a route,
for example:
```
get "contact" => "static#show", id: "contact"
```
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
We don't need it anymore. Actually, I removed using of it on the client side a long time ago, when I was working on improving blank page syndrome on user activity pages (see https://github.com/discourse/discourse/pull/14311).
This PR also removes some old resource strings that we don't use anymore. We have new strings for blank pages.
Currently the Message-IDs we send out for outbound email
are not unique; for a post they look like:
topic/TOPIC_ID/POST_ID@HOST
And for a topic they look like:
topic/TOPIC_ID@HOST
This commit changes the outbound Message-IDs to also have
a random suffix before the host, so the new format is
like this:
topic/TOPIC_ID/POST_ID.RANDOM_SUFFIX@HOST
Or:
topic/TOPIC_ID.RANDOM_SUFFIX@HOST
This should help with email deliverability. This change
is backwards-compatible, the old Message-ID format will
still be recognized in the mail receiver flow, so people
will still be able to reply using Message-IDs, In-Reply-To,
and References headers that have already been sent.
This commit also refactors Message-ID related logic
to a central location, and adds judicious amounts of
tests and documentation.
When redirecting to login, we store a destination_url cookie, which the user is then redirected to after login. We never want the user to be redirected to a JSON URL. Instead, we should return a 403 in these situations.
This should also be much less confusing for API consumers - a 403 is a better representation than a 302.
Related to: 20f736aa11.
`auto_update` is true by default at the database level, but it doesn't make sense for `auto_update` to be true on themes that are not imported from a Git repository.
Under some conditions, these varied responses could lead to cache poisoning, hence the 'security' label.
Previously the Rails application would serve JSON data in place of HTML whenever Ember CLI requested an `application.html.erb`-rendered page. This commit removes that logic, and instead parses the HTML out of the standard response. This means that Rails doesn't need to customize its response for Ember CLI.
* REFACTOR: Improve support for consolidating notifications.
Before this commit, we didn't have a single way of consolidating notifications. For notifications like group summaries, we manually removed old ones before creating a new one. On the other hand, we used an after_create callback for likes and group membership requests, which caused unnecessary work, as we need to delete the record we created to replace it with a consolidated one.
We now have all the consolidation rules centralized in a single place: the consolidation planner class. Other parts of the app looking to create a consolidable notification can do so by calling Notification#consolidate_or_save!, instead of the default Notification#create! method.
Finally, we added two more rules: one for re-using existing group summaries and another for deleting duplicated dashboard problems PMs notifications when the user is tracking the moderator's inbox. Setting the threshold to one forces the planner to apply this rule every time.
I plan to add plugin support for adding custom rules in another PR to keep this one relatively small.
* DEV: Introduces a plugin API for consolidating notifications.
This commit removes the `Notification#filter_by_consolidation_data` scope since plugins could have to define their criteria. The Plan class now receives two blocks, one to query for an already consolidated notification, which we'll try to update, and another to query for existing ones to consolidate.
It also receives a consolidation window, which accepts an ActiveSupport::Duration object, and filter notifications created since that value.
Recently, the wrong new behavior appeared – we started to suggest to invited users usernames like "user1".
To reproduce:
1. Create an invitation with default settings, do not restrict it to email
2. Copy an invitation link and follow it in incognito mode
See username already filled, with eg “user1”. See screenshot. Should be empty.
This bug was very likely introduced by my recent changes to UserNameSuggester.
We have a couple of site setting, `slow_down_crawler_user_agents` and `slow_down_crawler_rate`, that are meant to allow site owners to signal to specific crawlers that they're crawling the site too aggressively and that they should slow down.
When a crawler is added to the `slow_down_crawler_user_agents` setting, Discourse currently adds a `Crawl-delay` directive for that crawler in `/robots.txt`. Unfortunately, many crawlers don't support the `Crawl-delay` directive in `/robots.txt` which leaves the site owners no options if a crawler is crawling the site too aggressively.
This PR replaces the `Crawl-delay` directive with proper rate limiting for crawlers added to the `slow_down_crawler_user_agents` list. On every request made by a non-logged in user, Discourse will check the User Agent string and if it contains one of the values of the `slow_down_crawler_user_agents` list, Discourse will only allow 1 request every N seconds for that User Agent (N is the value of the `slow_down_crawler_rate` setting) and the rest of requests made within the same interval will get a 429 response.
The `slow_down_crawler_user_agents` setting becomes quite dangerous with this PR since it could rate limit lots if not all of anonymous traffic if the setting is not used appropriately. So to protect against this scenario, we've added a couple of new validations to the setting when it's changed:
1) each value added to setting must 3 characters or longer
2) each value cannot be a substring of tokens found in popular browser User Agent. The current list of prohibited values is: apple, windows, linux, ubuntu, gecko, firefox, chrome, safari, applewebkit, webkit, mozilla, macintosh, khtml, intel, osx, os x, iphone, ipad and mac.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
* FEATURE: Optionally send a 'noindex' header in non-canonical responses
This will be used in a SEO experiment.
Co-authored-by: David Taylor <david@taylorhq.com>
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
Use @here to mention all users that were allowed to topic directly or
through group, who liked topics or read the topic. Only first 10 users
will be notified.
This takes the uppy chunking algorithm and combines it with some
form submission from resumable.js for parity with the current
backup controller to make local backup uploads work with uppy.
We can then use this to replace the resumable-upload component
and the resumable.js library from our codebase, once stable.
This is disabled by default, so people using local backups will not
be affected. The enable_experimental_backup_uploader site setting
must be enabled for this to work.
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
Uppy adds the file name as the "name" parameter in the
payload by default, which means that for things like the
emoji uploader which have a name param used by the controller,
that param will be passed as the file name. We already use
the existing file name if the name param is null, so this
commit just does further cleanup of the name param, removing
the extension if it is a filename so we don't end up with
emoji names like blah_png.
Uppy and Resumable slice up their chunks differently, which causes a difference
in this algorithm. Let's take a 131.6MB file (137951695 bytes) with a 5MB (5242880 bytes)
chunk size. For resumable, there are 26 chunks, and uppy there are 27. This is
controlled by forceChunkSize in resumable which is false by default. The final
chunk size is 6879695 (chunk size + remainder) whereas in uppy it is 1636815 (just remainder).
This means that the current condition of uploaded_file_size + current_chunk_size >= total_size
is hit twice by uppy, because it uses a more correct number of chunks. This
can be solved for both uppy and resumable by checking the _previous_ chunk
number * chunk_size as the uploaded_file_size.
An example of what is happening before that change, using the current
chunk number to calculate uploaded_file_size.
chunk 26: resumable: uploaded_file_size (26 * 5242880) + current_chunk_size (6879695) = 143194575 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (5242880) = 141557760 >= total_size (137951695) ? YES
chunk 27: uppy: uploaded_file_size (27 * 5242880) + current_chunk_size (1636815) = 143194575 >= total_size (137951695) ? YES
An example of what this looks like after the change, using the previous
chunk number to calculate uploaded_file_size:
chunk 26: resumable: uploaded_file_size (25 * 5242880) + current_chunk_size (6879695) = 137951695 >= total_size (137951695) ? YES
chunk 26: uppy: uploaded_file_size (25 * 5242880) + current_chunk_size (5242880) = 136314880 >= total_size (137951695) ? NO
chunk 27: uppy: uploaded_file_size (26 * 5242880) + current_chunk_size (1636815) = 137951695 >= total_size (137951695) ? YES
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
David Taylor
Blake Erickson
Sam
Jarek Radosz
Osama Sayegh
Martin Brennan
Joffrey JAFFEUX
Dan Ungureanu
Jeff Wong
Loïc Guitaut
Bianca Nenciu
Michael Brown
Krzysztof Kotlarek
Vinoth Kannan
Martin Brennan
Alan Guo Xiang Tan
janzenisaac
Rafael dos Santos Silva
Roman Rizzi
Robin Ward
Andrei Prigorshnev
Peter Zhu
Penar Musaraj
Gerhard Schlager
Angus McLeod
Akshay Birajdar
Daniel Waterworth