* Because custom emoji count as post "uploads" we were
marking them as secure when updating the secure status for post uploads.
* We were also giving them an access control post id, which meant
broken image previews from 403 errors in the admin custom emoji list.
* We now check if an upload is used as a custom emoji and do not
assign the access control post + never mark as secure.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
When uploading a file to a theme component, and that file is existing and has already been marked as secure, we now automatically mark the file as secure: false, change the ACL, and log the action as the user (also rebake the posts for the upload)
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
* Support private uploads in S3
* Use localStore for local avatars
* Add job to update private upload ACL on S3
* Test multisite paths
* update ACL for private uploads in migrate_to_s3 task
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
Some sites have external URLs that don't even match `%/uploads/%' and
some sites surprise me with URLs that contains the default path when it
is a site in a multisite cluster. We can't do anything about those.
Previously if upload had missing width and height we would calculate
on first use BUT we (me) forgot to save this to the database
This was particularly bad on home page cause category images (when old)
miss dimensions.
This generates a 10x10 PNG thumbnail for each lightboxed image.
If Image Lazy Loading is enabled (IntersectionObserver API) then
we'll load the low res version when offscreen. As the image scrolls
in we'll swap it for the high res version.
We use a WeakMap to track the old image attributes. It's much less
memory than storing them as `data-*` attributes and swapping them
back and forth all the time.
For a normal upload url
Before
```
Warming up --------------------------------------
264.000 i/100ms
Calculating -------------------------------------
2.754k (± 8.4%) i/s - 13.728k in 5.022066s
```
After
```
Warming up --------------------------------------
341.000 i/100ms
Calculating -------------------------------------
3.435k (±11.6%) i/s - 17.050k in 5.045676s
```
Previously we used width and height for thumbnails, new code ensures
1. We auto correct width and height
2. We added extra columns for thumbnail_width and height, this is determined
by actual upload and no longer passed in as a side effect
3. Optimized Image now stores filesize which can be used for analysis, decisions
Also
- fixes Android image manifest as a side effect
- fixes issue where a thumbnail generated that is smaller than the upload is no longer used
* `rescue nil` is a really bad pattern to use in our code base.
We should rescue errors that we expect the code to throw and
not rescue everything because we're unsure of what errors the
code would throw. This would reduce the amount of pain we face
when debugging why something isn't working as expexted. I've
been bitten countless of times by errors being swallowed as a
result during debugging sessions.
This refactors handling of s3 so it can be specified via GlobalSetting
This means that in a multisite environment you can configure s3 uploads
without actual sites knowing credentials in s3
It is a critical setting for situations where assets are mirrored to s3.
Martin Brennan
Penar Musaraj
Krzysztof Kotlarek
Gerhard Schlager
Guo Xiang Tan
Sam Saffron
Vinoth Kannan
Guo Xiang Tan
Robin Ward
Arpit Jalan
Régis Hanol
Maja Komel
Rafael dos Santos Silva
Neil Lalonde
Jakub Macina