If a secure upload's access_control_post was trashed, and an anon user
tried to look at that upload, they would get a 500 error rather than
the correct 403 because of an error inside the PostGuardian logic.
We show live user status on mentions starting from a76d864. But status didn’t appear on the post that appears on the bottom of the topic just after a user posted it (status appeared only after page reloading). This adds status to just posted posts.
A few specs in `dashboard_controller_spec.rb` set some state in redis but don't clean it up afterwards which causes other specs to fail when they're ran after `dashboard_controller_spec.rb`.
Related commit: 18467d4.
Featured topics are eventually serialized by `ListableTopicSerializer`
which calls `Topic#image_url` which requires us to preload
`Topic#topic_thumbnails`.
At the time of writing, this is how the `TopicPosterSerializer` looks
like:
```
class TopicPosterSerializer < ApplicationSerializer
attributes :extras, :description
has_one :user, serializer: PosterSerializer
has_one :primary_group, serializer: PrimaryGroupSerializer
has_one :flair_group, serializer: FlairGroupSerializer
end
```
Within `PosterSerializer`, the `primary_group` and `flair_group`
association is requested on the `user` object. However, the associations
have not been loaded on the `user` object at this point leading to the
N+1 queries problem. One may wonder
why the associations have not been loaded when the `TopicPosterSerializer`
has `has_one :primary_group` and `has_one :flair_group`. It turns out that `TopicPoster`
is just a struct containing the `user`, `primary_group` and
`flair_group` objects. The `primary_group` and `flair_group`
ActiveRecord objects are loaded seperately in `UserLookup` and not preloaded when querying for
the users. This is done for performance reason so that we are able to
load the `primary_group` and `flair_group` records in a single query
without duplication.
It was redefining rather than including them. It was causing this warning:
```
WARNING: Shared example group suspension of active user possible was defined without a block and will have no effect. Please define a block or remove the definition
```
* UX: Wizard Step Enhancements
- Remove illustrations
- Add Emoji graphic to top of steps
- Add description below step title
- Move point of contact to last step
* Move step count to header, plus some button navigation tweaks
* add remaining emoji to step headers
* fix button logic on steps
* Update Point of Contact
* remove automated messages field
* adjust styling for counter, title, and emoji
* Update wording for logos
* Fix tests
* fix prettier
* fix specs
* set same with for steps except for styling screen
* use sentence case; remove duplicate copy under your organization fields
* fix missing buttons on small screens
* add spacing to buttons; adjust font weight to labels
* adjust styling for community logo step; use sentence case for button
* update copy for point of contact text helper
* use sentence case for field labels
* fix ui tests
* use btn-back class to fix ui tests
* reduce bottom margin for toggle fields
* clean up
Co-authored-by: Ella <ella.estigoy@gmail.com>
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
We were changing the user's user_option.bookmark_auto_delete_preference
to whatever they changed it to in the bookmark modal to use as default
for future bookmarks. However this was leading to a lot of confusion
since if you wanted to set it for one bookmark you had to remember to
change it back on the next one.
This commit removes that automatic functionality, and instead moves
the bookmark auto delete preference to User Preferences > Interface
in an explicit dropdown.
This commit adds a new notification that gets sent to admins when the site gets new features after an upgrade/deploy. Clicking on the notification takes the admin to the admin dashboard at `/admin` where they can see the new features under the "New Features" section.
Internal topic: t/87166.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
When user is watching category or tag (watching or watching first post) notifications are moved to other tab.
To achieve that and distinguish between post create to directly watched topics and indirectly watched topics, new notification type called `watching_category_or_tag` was introduced.
* FEATURE: Show similar users when penalizing a user
Moderators will be notified if other users with the same IP address
exist before penalizing a user.
* FEATURE: Allow staff to penalize multiple users
This allows staff members to suspend or silence multiple users belonging
to the same person.
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
The default behavior for Rails is to vary the response of an endpoint based on the `Accept:` header, and therefore it returns a `Vary:` header on responses. This instructs browsers and intermediate proxies to key their caches based on the value of the request's `Accept` header. In some cases (e.g. Akamai), the presence of a `Vary` header is enough to prevent caching entirely.
This commit restructures the Rails route definitions so that:
1. The "format" segment of the route is 'required'
2. The "format" segment of the route is constrained to a single value (e.g. `js` or `css`)
Now that the routes are guaranteed to have a `:format` segment, Rails will always prioritize that over the `Accept` header, and will therefore omit the `Vary` header.
Request specs are also added to test this behaviour for both stylesheets and theme-javascripts.
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
* FEATURE: Show warning if group cannot be mentioned
A similar warning is displayed when the user cannot be mentioned because
they have not been invited to the topic.
* FEATURE: Resolve mentions for new topic
This commit improves several improvements and refactors
/u/is_local_username route to a better /composer/mentions route that
can handle new topics too.
* FEATURE: Show warning if only some are notified
Sometimes users are still notified even if the group that was mentioned
was not invited to the message. This happens because its members were
invited directly or are members of other groups that were invited.
* DEV: Refactor _warnCannotSeeMention
When uploads are stored on S3, by default Discourse will fetch the avatars and proxy them through to the requesting client. This is simple, but it can lead to significant inbound/outbound network load in the hosting environment.
This commit adds an optional redirect_avatar_requests GlobalSetting. When enabled, requests for user avatars will be redirected to the S3 asset instead of being proxied. This adds an extra round-trip for clients, but it should significantly reduce server load. To mitigate that extra round-trip for clients, a CDN with 'follow redirect' capability could be used.
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
I'm hesitant to call this a performance improvement since claiming a
reviewable is probably rare. However, this commit cuts out two DB
queries each time we have to publish a reviewable claimed message. More
importantly, publishing to groups scales much better than publishing to
users because we esstentially cap the number ids we have to load into
memory.
This adds API scope for the user status. This also adds a get method to the user status controller. We didn't need a dedicated method that returns status before because the server returns status with user objects, but I think we need to provide this method for API clients.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
* FEATURE: API to update user's discourse connect external id
This adds a special handling of updates to DiscourseConnect external_id
in the general user update API endpoint.
Admins can create, update or delete a user SingleSignOn record using
PUT /u/:username.json
{
"external_ids": {
"discourse_connect": "new-external-id"
}
}
When opening the invite acceptance page when the user
was already logged in, we were still showing the Accept
Invitation prompt even if the user had already redeemed
the invitation and was present in the `InvitedUser` table.
This would lead to errors when the user clicked on the button.
This commit fixes the issue by hiding the Accept Invitation
button and showing an error message instead indicating that
the user had already redeemed the invitation. This only applies
to multi-use invite links.
The problem was reported as a problem with changing theme in user preferences, after saving a new theme the previously set user status was disappearing (https://meta.discourse.org/t/user-status/240335/42). Turned out though that the problem was more wide, changing pretty much any setting in user preferences apart from user status itself led to clearing the status.
This commit adds some protections in InviteRedeemer to ensure that email
can never be nil, which could cause issues with inviting the invited
person to private topics since there was an incorrect inner join.
If the email is nil and the invite is scoped to an email, we just use
that invite.email unconditionally. If a redeeming_user (an existing
user) is passed in when redeeming an email, we use their email to
override the passed in email. Otherwise we just use the passed in
email. We now raise an error after all this if the email is still nil.
This commit also adds some tests to catch the private topic fix, and
some general improvements and comments around the invite code.
This commit also includes a migration to delete TopicAllowedUser records
for users who were mistakenly added to topics as part of the invite
redemption process.
Currently, moderators are able to set primary group for users
irrespective of the of the `moderators_manage_categories_and_groups` site
setting value.
This change updates Guardian implementation to honour it.
Depends on: #18806
We have a banner that prompts to edit the welcome topic, so let's not
show it in the topic list until it has been edited. Previously this
banner covered the welcome topic, now the banner will be above the topic
list, so we need to hide the welcome topic.
* DEV: Add a dedicated Admin::StaffController base controller
The current parent(Admin:AdminController) for all admin-related controllers
uses a filter that allows only staff(admin, moderator) users.
This refactor makes Admin::AdminController filter for only admins as the name suggests and
introduces a base controller dedicated for staff-related endpoints.
* DEV: Set staff-only controllers parent to Admin::StaffController
Refactor staff-only controllers to inherit newly introduced
Admin::StaffController abstract controller. This conveys the
purpose of the parent controller better unlike the previously used parent
controller.
* FIX: Follow up fixes for password-reset error page
Pass in `base_url` to the template
Use `.html_safe` since the message now contains html
Follow up to: 9b1536fb83
* Update specs to pass in the base_url
Before this commit, we did not have guardian checks in place to determine if a
topic's title associated with a user badge should be displayed or not.
This means that the topic title of topics with restricted access
could be leaked to anon and users without access if certain conditions
are met. While we will not specify the conditions required, we have internally
assessed that the odds of meeting such conditions are low.
With this commit, we will now apply a guardian check to ensure that the
current user is able to see a topic before the topic's title is included
in the serialized object of a `UserBadge`.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
The `active` param on the create user endpoint requires that an api key
is used in the request header otherwise it is ignored, so adding this
distinction to the api docs.
* DEV: Use list controller and action
It used an empty action handler which just returned the app and it
required another request to get the topic list. By using the correct
controller and action we can preload the topic list.
Our theme system injects a magical `settings` object at the top of themes JS modules to allow theme authors to access the settings as configured by admins in the UI. Within this `settings` object, there are a couple of special objects `theme_uploads` and `theme_uploads_local` that contain URLs for all the assets/uploads that the theme has.
For test modules/files, the theme system also injects a `settings` object at the top of tests modules, but it's not the same object as the object that's injected in non-test files. The difference is that in tests we want the settings to have their default values as opposed to any custom values that may exist in the site's database. This ensures that test results are consistent no matter the site that runs them.
However, the `settings` object in tests files currently doesn't have the special objects `theme_uploads` and `theme_uploads_local` which means that if a theme includes an asset that's lazy-loaded, it's not possible to write tests for anything that depends on the lazy-loaded asset because the theme will not be able to load the asset during the tests since `theme_uploads_local` and `theme_uploads` don't exist. This PR adds these special objects inside the `settings` object for test files.
Internal topic: t/71825/52.
This commit excludes posts from hidden topics from the latest posts and user activity RSS feeds. Additionally, it also excludes small actions from the first one.
Theme javascript is now minified using Terser, just like our core/plugin JS bundles. This reduces the amount of data sent over the network.
This commit also introduces sourcemaps for theme JS. Browser developer tools will now be able show each source file separately when browsing, and also in backtraces.
For theme test JS, the sourcemap is inlined for simplicity. Network load is not a concern for tests.
The previous implementation would attempt to fetch groups using the end-user's Google auth token. This only worked for admin accounts, or users with 'delegated' access to the `admin.directory.group.readonly` API.
This commit changes the approach to use a single 'service account' for fetching the groups. This removes the need to add permissions to all regular user accounts. I'll be updating the [meta docs](https://meta.discourse.org/t/226850) with instructions on setting up the service account.
This is technically a breaking change in behavior, but the existing implementation was marked experimental, and is currently unusable in production google workspace environments.
* Revert "Revert "FEATURE: Preload resources via link header (#18475)" (#18511)"
This reverts commit 95a57f7e0c.
* put behind feature flag
* env -> global setting
* declare global setting
* forgot one spot
Unless we have specified `override = true` in the DeprecatedSettings
class for an old -> new settings map, we should not allow people
to change the old setting in the UI and have it affect the new
setting.
* FEATURE: Hide Privacy Policy and TOS topics
As a way to simplify new sites this change will hide the privacy policy
and the TOS topics from the topic list. They can still be accessed and
edited though.
* add tests
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
Experiment moving from preload tags in the document head to preload information the the response headers.
While this is a minor improvement in most browsers (headers are parsed before the response body), this allows smart proxies like Cloudflare to "learn" from those headers and build HTTP 103 Early Hints for subsequent requests to the same URI, which will allow the user agent to download and parse our JS/CSS while we are waiting for the server to generate and stream the HTML response.
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Adds a new upload field for a second dark mode category logo.
This alternative will be used when the browser is in dark mode (similar to the global site setting for a dark logo).
This commit makes pending reviewables show up in the main tab (a.k.a. "all notifications" tab). Pending reviewables along with unread notifications are always shown first and they're sorted based on their creation date (most recent comes first).
The dismiss button currently only shows up if there are unread notifications and it doesn't dismiss pending reviewables. We may follow up with another change soon that allows makes the dismiss button work with reviewables and remove them from the list without taking any action on them.
Follow-up to 079450c9e4.
cf. e62e93f83a
This PR also makes it so `bot` (negative ID) and `system` users are always allowed
to send PMs, since the old conditional was just based on `enable_personal_messages`
This commit adds non-archived group messages and `group_message_summary` notifications in the messages tab in the user menu. With this change, the messages tab in the user menu now includes 3 types of items:
1. Unread `private_message` notifications (notifications when you receive a reply in a PM)
2. Unread and read `group_message_summary` notifications (notifications when there's a new message in a group inbox that you track)
3. Non-archived personal and group messages
Unread `private_message` notifications are always shown first, followed by unread `group_message_summary` notifications, and then everything else (messages and read `group_message_summary` notifications) sorted by recency (most recent first).
Internal topic: t/72976.
Currently, the reviewables tab in the user menu shows pending reviewables at the top of the menu and fills the remaining space in the menu with old/handled reviewables. This PR makes the revieables tab show only pending reviewables and hides the tab altogether from the menu if there are no pending reviewables. We're going to follow-up with another change soon that will show pending reviewables in the main tab of the user menu.
Internal topic: t/73220.
* SECURITY: moderator shouldn't be able to import a theme via API.
* DEV: apply `AdminConstraint` for all the "themes" routes.
Co-authored-by: Vinoth Kannan <svkn.87@gmail.com>
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
* FEATURE: add composer warning when user haven't been seen in a long time
When a user creates a PM and adds a recipient that hasn't been seen in a
long time then we'll now show a warning in composer indicating that the
user hasn't been seen in a long time.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
We previously had a system which would generate a 10x10px preview of images and add their URLs in a data-small-upload attribute. The client would then use that as the background-image of the `<img>` element. This works reasonably well on fast connections, but on slower connections it can take a few seconds for the placeholders to appear. The act of loading the placeholders can also break or delay the loading of the 'real' images.
This commit replaces the placeholder logic with a new approach. Instead of a 10x10px preview, we use imagemagick to calculate the average color of an image and store it in the database. The hex color value then added as a `data-dominant-color` attribute on the `<img>` element, and the client can use this as a `background-color` on the element while the real image is loading. That means no extra HTTP request is required, and so the placeholder color can appear instantly.
Dominant color will be calculated:
1. When a new upload is created
2. During a post rebake, if the dominant color is missing from an upload, it will be calculated and stored
3. Every 15 minutes, 25 old upload records are fetched and their dominant color calculated and stored. (part of the existing PeriodicalUpdates job)
Existing posts will continue to use the old 10x10px placeholder system until they are next rebaked
When tagging is enabled, we were correctly serializing tags by their name. However, when tagging was disabled we were attempting to serialize an entire Tag object which raises an error since ee07f6da7d.
https://meta.discourse.org/t/232885
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
The generate RSA key and import theme routes worked separate from each
other. The RSA key returned both the public and private key and it was
the frontend which posted the private key back to the server. With this
commit, only the public key is necessary as the server keeps a map of
public and private keys that is used to get the private key back from
a public key.
This lets us use all our normal JS tooling like prettier, esline and babel on the splash screen JS. At runtime the JS file is read and inlined into the HTML. This commit also switches us to use a CSP hash rather than a nonce for the splash screen.
When preloading topic_list data we were giving it a 'preload key' which was loosely based on the parameters of the list. However, it did not include all parameters, and mismatches between client/server-side logic would cause the preloaded data to be ignored.
This commit simplifies things by using a single key for all topic_list preloading. This works on the assumption that "The first topic_list the JS app will load is the one which was preloaded". That assumption also existed to some extent in the old design, so we don't expect any regressions here.
The logic to determine what post excerpt to show for
a topic-level bookmark based on the last unread post
was complex and slow, so we decided to remove it and
always just use the first post excerpt.
This commit also fixes an issue where a couple of
instances of for_topic were missed when doing the
Bookmarkable refactors, so:
1. Clicking the topic bookmark link was not taking
the user to the last unread post
2. When replying to a topic where there was a topic
level bookmark with the auto delete preference
of "on owner reply", we were not removing the
bookmark from the UI correctly.
A test has been added for the former, the latter would
be quite time-consuming to test and not really worth
it considering it's quite an edge case UI bug.
Previously, for every bookmarked topic, all topic_user records were being preloaded. Only the current user's record is actually required.
This commit introduces a new `perform_custom_preload!` API which bookmarkables can use to add custom preloading logic. We use this in topic_bookmarkable to load just the topic_user data we need (in the same way as `topic_list.rb`).
Co-authored-by: Blake Erickson <o.blakeerickson@gmail.com>
Previously, this would require manually adding `?safe_mode=...` multiple times during the email-based login flow. `/u/admin-login` is often used when debugging a site, so it makes sense for this to be easier.
This commit introduces a new checkbox on the `/u/admin-login` screen. When checked, it'll set the safe_mode parameter on the `/email-login` link, and then pass it all the way through to the homepage redirect.
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
Some of the changes in this PR are extracted from https://github.com/discourse/discourse/pull/17379.
Similar to the bookmarks tab in the new user menu, the messages tab also displays a mix of notifications and messages. When there are unread message notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with a list of the user's messages. The bubble/badge count on the messages tab indicates how many unread message notifications there are.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Follow up to 4d3c1ceb44, this commit
shows the SMTP response in the admin email sent list and also moves the
topic/post link into a new column. Reply key is now in its own column.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
Some errors (e.g. InvalidAccess) are rendered with `include_ember: true`. Booting the ember app requires that the 'preload' data is rendered in the HTML.
If a particular route was configured to `skip_before_action :preload_json`, and then went on to raise an InvalidAccess error, then we'd attempt to render the Ember app without the preload json. This led to a blank screen and a client-side error.
This commit ensures that error pages will fallback to the no_ember view if there is no preload data. It also adds a sanity check in `discourse-bootstrap` so that it's easier for us to identify similar errors in future.
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
* FEATURE: revamped wizard
* UX: Wizard redesign (#17381)
* UX: Step 1-2
* swap out images
* UX: Finalize all steps
* UX: mobile
* UX: Fix test
* more test
* DEV: remove unneeded wizard components
* DEV: fix wizard tests
* DEV: update rails tests for new wizard
* Remove empty hbs files that were created because of rebase
* Fixes for rebase
* Fix wizard image link
* More rebase fixes
* Fix rails tests
* FIX: Update preview for new color schemes: (#17481)
* UX: make layout more responsive, update images
* fix typo
* DEV: move discourse logo svg to template only component
* DEV: formatting improvements
* Remove unneeded files
* Add tests for privacy step
* Fix banner image height for step "ready"
Co-authored-by: Jordan Vidrine <30537603+jordanvidrine@users.noreply.github.com>
Co-authored-by: awesomerobot <kris.aubuchon@discourse.org>
This commit introduces a new plugin API to register
a group of stats that will be included in about.json
and also conditionally in the site about UI at /about.
The usage is like this:
```ruby
register_about_stat_group("chat_messages", show_in_ui: true) do
{
last_day: 1,
"7_days" => 10,
"30_days" => 100,
count: 1000,
previous_30_days: 120
}
end
```
In reality the stats will be generated any way the implementer
chooses within the plugin. The `last_day`, `7_days`, `30_days,` and `count`
keys must be present but apart from that additional stats may be added.
Only those core 4 stat keys will be shown in the UI, but everything will be shown
in about.json.
The stat group name is used to prefix the stats in about.json like so:
```json
"chat_messages_last_day": 2322,
"chat_messages_7_days": 2322,
"chat_messages_30_days": 2322,
"chat_messages_count": 2322,
```
The `show_in_ui` option (default false) is used to determine whether the
group of stats is shown on the site About page in the Site Statistics
table. Some stats may be needed purely for reporting purposes and thus
do not need to be shown in the UI to admins/users. An extension to the Site
serializer, `displayed_about_plugin_stat_groups`, has been added so this
can be inspected on the client-side.
The site.json endpoint was missing some optional fields on the
categories property that is returned. This commit documents the
`parent_category_id` which is present if there are subcategories and it
also documents the `custom_fields` property which the chat plugin is
using causing some flaky tests.
* FIX: Posts can belong to hard-deleted topics
This was a problem when serializing deleted posts because they might
belong to a topic that was permanently deleted. This caused to DB
lookup to fail immediately and raise an exception. In this case, the
endpoint returned a 404.
* FIX: Remove N+1 queries
Deleted topics were not loaded because of the default scope that
filters out all deleted topics. It executed a query for each deleted
topic.
We previously relied on CSS animation-delay for the splash. This means that we can get inconsistent results based on device/network conditions.
This PR moves us to a more consistent timing based on {request time + 2 seconds}
Internal topic: /t/65378/65
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
* DEV: Fix flaky admin badges.json api docs spec
This commit is to fix this incredibly vague error message:
```
Failure/Error: expect(valid).to eq(true)
expected: true
got: false
```
From this test:
> Assertion: badges /admin/badges.json get success response behaves like
> a JSON endpoint response body matches the documented response schema
I was finally able to repro locally using parallel tests:
```
RAILS_ENV=test bundle exec ./bin/turbo_rspec
```
I *think* the parallel tests might be swallowing the `puts` output, but
when I also specified the individual spec file
```
RAILS_ENV=test bundle exec ./bin/turbo_rspec spec/requests/api/badges_spec.rb
```
It revealed the issue:
```
VALIDATION DETAILS: {"missing_keys"=>["i18n_name"]}
```
``` ruby
...
def include_i18n_name?
object.system?
end
```
Looks like if the "system" user isn't being used the `i18n_name` won't
be returned in the json response so we shouldn't mark it as a required
attribute.
* Switch to using fab!
When using `let(:badge)` to fabricate a test badge it wouldn't be
returned from the controller, but switching to using `fab!` allows it to
be returned in the json data giving us a non-system badge to test
against.
When calling the API to delete a user:
```
curl -X DELETE "https://discourse.example.com/admin/users/159.json" \
-H "Content-Type: multipart/form-data;" \
-H "Api-Key: ***" \
-H "Api-Username: ***" \
-F "delete_posts=true" \
-F "block_email=false" \
-F "block_urls=false" \
-F "block_ip=false"
```
Setting the parameters `block_email`, `block_urls` and `block_ip`explicitly to `false` did not work because the values weren't being parsed to boolean.
This PR introduces a new hidden site setting that allows admins to display a splash screen while site assets load.
The splash screen can be enabled via the `splash_screen` hidden site setting.
This is what the splash screen currently looks like
5ceb72f085.mp4
Once site assets load, the splash screen is automatically removed.
To control the loading text that shows in the splash screen, you can change the preloader_text translation string in admin > customize > text
In certain situations, a logged in user can redeem an invite with an email that
either doesn't match the invite's email or does not adhere to the email domain
restriction of an invite link. The impact of this flaw is aggrevated
when the invite has been configured to add the user that accepts the
invite into restricted groups.
The category description fields as part of the rswag specs for the
site.json endpoint were flakey. Removing the `required` attribute allows
us to still document that these fields exists, but that depending on
certain site settings they may not be present in the response.
Certain rogue bots such as Yandex may send across invalid CSP reports
when CSP report collection is enabled.
This ensures that invalid reports will not cause log floods and simply
returns a 422 error.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
Presence endpoints are often called asynchronously at the same time as other request, and never need to modify the session. Skipping ensures that an unneeded cookie rotation doesn't race against another request and cause issues.
This change brings presence in line with message-bus's behaviour.
As part of this commit, a bug where updating a tag's notification level on the server side does not update the state of the user's tag notification levels on the client side is fixed too.
The `WebhookController` inherits directly from `ActionController::Base`. Since Rails 5.2, forgery protection has been enabled by default. When we applied those new defaults in 0403a8633b, it took effect on this controller and broke integrations.
This commit explicitly disables CSRF protection on these webhook routes, and updates the specs so they'll catch this kind of regression in future.
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
The server-side implementation had unintentionally changed to include `-{id}` at the end of the body class name. This change meant that the JS client was unaware of the class, and didn't remove it when navigating away from the category page.
This commit fixes the server-side implementation to match the client
Previously we limited Discourse Connect provider to 1 secret per domain.
This made it pretty awkward to cycle secrets in environments where config
takes time to propagate
This change allows for the same domain to have multiple secrets
Also fixes internal implementation on DiscourseConnectProvider which was
not thread safe as it leaned on class variables to ferry data around
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Previously we hardcoded the DOWNLOAD_URL_EXPIRES_AFTER_SECONDS const
inside S3Helper to be 5 minutes (300 seconds). For various reasons,
some hosted sites may need this to be longer for other integrations.
The maximum expiry time for presigned URLs is 1 week (which is
604800 seconds), so that has been added as a validation on the
setting as well. The setting is hidden because 99% of the time
it should not be changed.
When searching for PMs or PMs in a group inbox, results in the header search were not being limited to 5 with a "More" link to the full page search. This PR fixes that.
It also simplifies the logic and updates the search API docs to include recently added `in:messages` and `group_messages:groupname` options.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
The title had to be added both on the 404 page generated by the server
side, displayed when the user reaches a bad page directly and the 404
page rendered by Ember when a user reaches a missing topic while
navigating the forum.
The logic in 06893380 only works for `.js` files. It breaks down for `.br.js` and `.gz.js` files. This commit makes things more robust by extracting only the base_url from the service-worker JS, and taking the map filename from the original `sourceMappingURL` comment.
`script_asset_path('.../blah.js.map')` was appending `.js`, which would result in a filename like `.js.map.js`. It would also lose the `/assets` prefix, since the map files are not included in the sprockets manifest.
This commit updates the sourceMappingURL rewriting logic to calculate the service-worker's own JS url, and then append `.map`.
We have a .ics endpoint for user bookmarks, this
commit makes it so polymorphic bookmarks work on
that endpoint, using the serializer associated with
the RegisteredBookmarkable.
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
This was causing issues on some sites, having the const, because this really is heavily
dependent on upload speed. We request 5-10 URLs at a time with this endpoint; for
a 1.5GB upload with 5mb parts this could mean 60 requests to the server to get all
the part URLs. If the user's upload speed is super fast they may request all 60
batches in a minute, if it is slow they may request 5 batches in a minute.
The other external upload endpoints are not hit as often, so they can stay as constant
values for now. This commit also increases the default to 20 requests/minute.
We have not used anything related to bookmarks for PostAction
or UserAction records since 2020, bookmarks are their own thing
now. Deleting all this is just cleaning up old cruft.
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
`TestLogger` was responsible for some flaky specs runs:
```
Error during failsafe response: undefined method `debug' for #<TestLogger:0x0000556c4b942cf0 @warnings=1>
Did you mean? debugger
```
This commit also cleans up other uses of `FakeLogger`
This was due to a server side bug when unicode usernames have been
enabled. We were double encoding the unicode username in the URL
resulting in a invalid URL.
This will make future changes to the 'pull hotlinked images' system easier. This commit should not introduce any functional change.
For now, the old post_custom_field data is kept in the database. This will be dropped in a future commit.
This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
David Taylor
Martin Brennan
Alan Guo Xiang Tan
Andrei Prigorshnev
Jan Cernik
Osama Sayegh
Jarek Radosz
Blake Erickson
Krzysztof Kotlarek
Bianca Nenciu
Wolftallemo
Gerhard Schlager
Rafael dos Santos Silva
Ayke Halder
Selase Krakani
Roman Rizzi
Meghna
Daniel Waterworth
Jan Cernik
Arpit Jalan
Vinoth Kannan
Penar Musaraj
Frank
Isaac Janzen
Loïc Guitaut
Wolftallemo
Phil Pirozhkov
Jean
Joe
Sérgio Saquetim
J. David Lowe
Sam
M.K. Safi
Johannes Faigle
Angus McLeod