This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This adds a safe default to not process pop3 emails when the pop3 polling option is set up that are > 1 week old. This is to avoid the situation where an older mailbox is used, which causes us to go and process all emails in that mailbox, sending out error emails to the senders of emails which cannot be parsed successfully.
My initial implementation didn't consider this case. We should skip imported users if the "imported_id" field is present, even if there're other custom fields.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
b8c676e7 added the 'forever' option to the UI, and this is correctly stored in the database. However, we had a hard-coded limit of 4 months in the cleanup job. This commit removes the limit, so ignores can last forever.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
When posts or topics are deleted we don't want to immediately delete associated bookmarks, so we have a grace period to recover them and their reminders if the post or topic is un-deleted. This PR adds a task to the Weekly scheduled job to go and delete bookmarks attached to posts or topics deleted > 3 days ago.
Previously, Jobs::EnqueueDigestEmails would enqueue a digest job for every user, even if there are no topics to send. The digest job would exit, no email would send, and last_emailed_at would not change. 30 minutes later, Jobs::EnqueueDigestEmails would run again and re-enqueue jobs for the same users.
120fa8ad introduced a temporary mitigation for this issue, by randomly selecting a subset of those users each time.
This commit adds a new `digest_attempted_at` column to the `user_stats` table. This column is updated every time a digest job completes for a user. Using this, we can avoid scheduling digest jobs for the same user every 30 minutes. This also removes the random user selection in 120fa8ad, and instead prioritizes users who had digests attempted the longest time ago.
To avoid blocking the sidekiq queue a limit of 10,000 digests per 30 minutes
is introduced.
This acts as a safety measure that makes sure we don't keep pouring oil on
a fire.
On multisites it is recommended to set the number way lower so sites do not
dominate the backlog. A reasonable default for multisites may be 100-500.
This can be controlled with the environment var
DISCOURSE_MAX_DIGESTS_ENQUEUED_PER_30_MINS_PER_SITE
After restoring a backup it takes up to 48 hours for uploads stored on S3 to appear in the S3 inventory. This change prevents alerts about missing uploads by preventing the EnsureS3UploadsExistence job from running in the first 48 hours after a restore. During the restore it deletes the count of missing uploads from the PluginStore, so that an alert isn't triggered by an old number.
With the addition of `PostSearchData#private_message`, a partial
index consisting of only search data from regular posts can be created.
The partial index helps to speed up searches on large sites since PG
will not have to do an index scan on the entire search data index which
has shown to be a bottle neck.
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
Was tired of seeing the following warnings in the logs
```
/discourse/app/jobs/scheduled/old_keys_reminder.rb:7: warning: already initialized constant Jobs::OldKeysReminder::OLD_CREDENTIALS_PERIOD
/discourse/app/jobs/scheduled/old_keys_reminder.rb:7: warning: previous definition of OLD_CREDENTIALS_PERIOD was here
```
* FEATURE: notify admins about old credentials
Security and API keys should be renewed periodically.
This additional notification should help admins keep their Discourse safe and secure.
It might happen that some User records have no associated primary emails.
In which case we don't ever want to send them a digest.
Also added a new "user_email_no_email" skipped email log to ensure these cases
are properly handled and surfaced.
* FEATURE: notify admins about old credentials
Security and API keys should be renewed periodically.
This additional notification should help admins keep their Discourse safe and secure.
* PERF: Dematerialize topic_reply_count
It's only ever used for trust level promotions that run daily, or compared to 0. We don't need to track it on every post creation.
* UX: Add symbol in TL3 report if topic reply count is capped
* DEV: Drop user_stats.topic_reply_count column
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
We have the `# frozen_string_literal: true` comment on all our
files. This means all string literals are frozen. There is no need
to call #freeze on any literals.
For files with `# frozen_string_literal: true`
```
puts %w{a b}[0].frozen?
=> true
puts "hi".frozen?
=> true
puts "a #{1} b".frozen?
=> true
puts ("a " + "b").frozen?
=> false
puts (-("a " + "b")).frozen?
=> true
```
For more details see: https://samsaffron.com/archive/2018/02/16/reducing-string-duplication-in-ruby
The main thrust of this PR is to take all the conditional checks based on the `enable_bookmarks_with_reminders` away and only keep the code from the `true` path, making bookmarks with reminders the core bookmarks feature. There is also a migration to create `Bookmark` records out of `PostAction` bookmarks for a site.
### Summary
* Remove logic based on whether enable_bookmarks_with_reminders is true. This site setting is now obsolete, the old bookmark functionality is being removed. Retain the setting and set the value to `true` in a migration.
* Use the code from the rake task to create a database migration that creates bookmarks from post actions.
* Change the bookmark report to read from the new table.
* Get rid of old endpoints for bookmarks
* Link to the new bookmarks list from the user summary page
Within 24 hours of signing up, new users were losing their
default trust level of 3. With this fix, demotions from
trust level 3 won't happen when the "default trust level"
setting is 3 or 4.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
Introduces a new site setting `max_notifications_per_user`.
Out-of-the-box this is set to 10,000. If a user exceeds this number of
notifications, we will delete the oldest notifications keeping only 10,000.
To disable this safeguard set the setting to 0.
Enforcement happens weekly.
This is in place to protect the system from pathological states where a
single user has enormous amounts of notifications causing various queries
to time out. In practice nobody looks back more than a few hundred notifications.
Previously the badge was granted one month after the last time the badge was granted. The exact date shifted by one day each month. The new logic tries to grant the badge always at the beginning of a new month by looking at new users of the previous month. The "granted at" date is set to the end of the previous month.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
Adds the settings:
raw_email_max_length, raw_rejected_email_max_length, delete_rejected_email_after_days.
These settings control retention of the "raw" emails logs.
raw_email_max_length ensures that if we get incoming email that is huge we will truncate it removing uploads from the raw log.
raw_rejected_email_max_length introduces an even more aggressive truncation for rejected incoming mail.
delete_rejected_email_after_days controls how many days we will keep rejected emails for (default 90)
Previously every hour we would run a full scan of the entire DB searching
for expired uploads that need to be moved to the tombstone folder.
This commit amends it so we only run the job 2 times per clean_orpha_uploads_grace_period_hours
There is a upper bound of 7 days so even if the grace period is set really
high it will still run at least once a week.
By default we have a 48 grace period so this amends it to run this cleanup
daily instead of hourly. This eliminates 23 times we run this ultra expensive
query.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Previously, calculating thresholds for reviewables was done based on the
50th and 85th percentile across all reviewables. However, many forum
owners provided feedback that these thresholds were too easy to hit, in
particular when it came to auto hiding content.
The calculation has been adjusted to base the priorities on reviewables
that have a minimum of 2 scores (flags). This should push the amount of
flags required to hide something higher then before.
On forums with very few flags you don't want to calculate averages
because they won't be very useful. Stick with the defaults until we hit
15 reviewables at least.
This reverts commit e805d44965.
We now have mechanisms in place to ensure heartbeat will always
be scheduled even if the scheduler is overloaded per: 098f938b
Databases can have a lot of user actions, self joining and running an
aggregate on millions of rows can be very costly
This optimisation will reduce the regular window of consistency down to 13
hours, this ensures the job runs much faster
* FIX: Heartbeat check per sidekiq process
* Rename method
* Remove heartbeat queues of previous bootups
* Regis feedback
* Refactor before_start
* Update lib/demon/sidekiq.rb
Co-Authored-By: Régis Hanol <regis@hanol.fr>
* Update lib/demon/sidekiq.rb
Co-Authored-By: Régis Hanol <regis@hanol.fr>
* Expire redis keys after 3600 seconds
* Don't use redis to store the list of queues
The site settings beginning with "topic views heat" and "topic post like
heat" are set to defaults when installing Discourse, but there has not
been a process or guidance for updating these values based on
community activity.
This feature will update them once a month. The low, medium, and
high settings will be based on the minimums of the 45th, 25th, and
10th percentile topics respectively, so that 45% of topics will have
some "heat".
Disable automatic changes with the automatic_topic_heat_values setting.
This does two things
1. Our "index grace period" has been wound down to 1 day, there is no point
keeping a bloated index for a week, usually when people delete stuff they
mean for it to be removed
2. We were never dropping deleted posts from the index, only posts from
deleted topics
These changes speed up search a tiny bit and reduce background work.
The `AutoQueueHandler` will ignore really old flags. In that case, don't
notify the user that the moderator is looking into it. They probably
never saw it because it didn't meet the reviewable minimum priority.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
We found score hard to understand. It is still there behind the scenes
for sorting purposes, but it is no longer shown.
You can now filter by minimum priority (low, med, high) instead of
score.
This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
After careful analysis of large data-sets it became apparent that avg_time
had no impact whatsoever on "best of" topic scoring. Calculating avg_time
was a very costly operation especially on large databases.
We have some longer term plans of introducing other weighting that is read
time based into our scoring for "best of" and "top" topics, but in the
interim to stop a large amount of work that is not achieving any value we
are removing the jobs.
Column removal will follow once we decide on a new replacement metric.
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
Mark VanLandingham
Martin Brennan
Roman Rizzi
Gerhard Schlager
Joffrey JAFFEUX
David Taylor
Bianca Nenciu
Gerhard Schlager
Sam
Guo Xiang Tan
Régis Hanol
Robin Ward
Krzysztof Kotlarek
Vinoth Kannan
Kane York
Neil Lalonde
Dan Ungureanu
OsamaSayegh
Guo Xiang Tan