If reload a page after enabling slow mode and open the slow mode dialog again it would show a slow mode interval but wouldn't show Enabled Until value. This PR fixes it.
The old share modal used to host both share and invite functionality,
under two tabs. The new "Share Topic" modal can be used only for
sharing, but has a link to the invite modal.
Among the sharing methods, there is also "Notify" which points out
that existing users will simply be notified (this was not clear
before). Staff members can notify as many users as they want, but
regular users are restricted to one at a time, no more than
max_topic_invitations_per_day. The user will not receive another
notification if they have been notified of the same topic in past hour.
The "Create Invite" modal also suffered some changes: the two radio
boxes for selecting the type (invite or email) have been replaced by a
single checkbox (is email?) and then the two labels about emails have
been replaced by a single one, some fields were reordered and the
advanced options toggle was moved to the bottom right of the modal.
This PR adds a new category setting which is a column in the `categories` table, `allow_unlimited_owner_edits_on_first_post`.
What this does is:
* Inside the `can_edit_post?` method of `PostGuardian`, if the current user editing a post is the owner of the post, it is the first post, and the topic's category has `allow_unlimited_owner_edits_on_first_post`, then we bypass the check for `LimitedEdit#edit_time_limit_expired?` on that post.
* Also, similar to wiki topics, in `PostActionNotifier#after_create_post_revision` we send a notification to all users watching a topic when the OP is edited in a topic with the category setting `allow_unlimited_owner_edits_on_first_post` enabled.
This is useful for forums where there is a Marketplace or similar category, where topics are created and then updated indefinitely by the OP rather than the OP making new topics or additional replies. In a way this acts similar to a wiki that only one person can edit.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.
When `PostCreator` creates a new topic it loads the `allowed_groups` of the topic. `Fabricate` doesn't do that and that's why the existing spec worked even though it should have failed, because `PostAlerter#notify_group_summary` didn't create a notification for a non-fabricated topic.
`Topic#invite_group` added a new `TopicAllowedGroup` record without reloading `Topic.allowed_groups`. A subsequent call to `PostAlerter#notify_group_summary` didn't work because it didn't find the invited group in the topic's `allowed_groups` association.
though other participants are not in allowed list)
If you create an allowlist of users who can PM you, and use the function
“Only specific users can send me private messages”, then you can’t be
added to group messages unless everyone in that message is already in
your allow list.
This commit allows user to be added to a group message even when other
participants are not in allowed list
Previously when inheriting category auto-close settings for a topic, those settings were disrupted if another topic timer was assigned or if a topic was closed then manually re-opened.
This PR makes it so that when a topic is manually re-opened the topic auto-close settings are inherited from the category. However, they will now be based on the topic created_at date. As an example, for a topic with a category auto close hours setting of 72 (3 days):
* Topic was created on 2021-02-15 08:00
* Topic was closed on 2021-02-16 10:00
* Topic was opened again on 2021-02-17 06:00
Now, the topic will inherit the auto close timer again and will close automatically at **2021-02-18 08:00**, which is based on the creation date. If the current date and time is greater than the original auto-close time (e.g. we were at 2021-02-20 13:45) then no auto-close timer is created.
Note, this will not happen if the topic category auto-close setting is "based on last post".
Updating a topic's visibility did not increase or decrease the
topic_count of a category, but Category.update_stats does ignore
unlisted topics which resulted in inconsistencies when deleting
such topics.
This PR allows entering a float value for topic timers e.g. 0.5 for 30 minutes when entering hours, 0.5 for 12 hours when entering days. This is achieved by adding a new column to store the duration of a topic timer in minutes instead of the ambiguous both hours and days that it could be before.
This PR has ommitted the post migration to delete the duration column in topic timers; it will be done in a subsequent PR to ensure that no data is lost if the UPDATE query to set duration_mintues fails.
I have to keep the old keyword of duration in set_or_create_topic_timer for backwards compat, will remove at a later date after plugins are updated.
This is a try to simplify logic around dismiss new topics to have one solution to work in all places - dismiss all-new, dismiss new in a specific category or even in a specific tag.
This PR adds security_last_changed_at and security_last_changed_reason to uploads. This has been done to make it easier to track down why an upload's secure column has changed and when. This necessitated a refactor of the UploadSecurity class to provide reasons why the upload security would have changed.
As well as this, a source is now provided from the location which called for the upload's security status to be updated as they are several (e.g. post creator, topic security updater, rake tasks, manual change).
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This PR fixes a race condition with the IMAP notification code. In the `Email::Receiver` we call the `NewPostManager` to create the post and enqueue jobs and sends alerts via `PostAlerter`. However, if the post alerter reaches the `notify_pm_users` and the `group_notifying_via_smtp` method _before_ the incoming email is updated with the post and topic, we unnecessarily send a notification to the person who just posted. The result of this is that the IMAP syncer re-imports the email sent to the user about their own post, which looks like this in the group inbox:
To fix this, we skip the jobs enqueued by `NewPostManager` and only enqueue them with `PostJobsEnqueuer` manually _after_ the incoming email record has been updated with the post and topic.
Other improvements:
* Moved code to calculate email addresses from `IncomingEmail` records into the topic, with a group passed in, for easier testing and debugging. It is not the responsibility of the post alerter to figure this stuff out.
* Add shortcut methods on `IncomingEmail` to split or provide an empty array for to and cc addresses to avoid repetition.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
- Only initialize the S3Helper when needed
- Skip initializing the S3Helper for S3Store#cdn_url
- Allow cook_url to be passed a `local` hint to skip unnecessary checks
It used to simply say "not allowed" without giving any hint what the
problem could be. This commit refactors the code and tries to improve
readability.
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
DEV: Replace instances of Discourse.base_uri with Discourse.base_path
This is clearer because the base_uri is actually just a path prefix. This continues the work started in 555f467.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
It's possible that the original topic image is broken in some form, so
we shouldn't try and generate a topic thumbnail for it. The fix will
prevent the generate_topic_thumbnails job being enqueued every time the
topic is viewed.
* DEV: Show message when cannot invite user to PM
When inviting a user to a PM return a message that says, "Sorry, this
user can't be invited." if they have been muted or are not in a users
allowed pm users list.
* Minor refactor & improved some text
This changes PG text search to only match the given title against
lexemes that are formed from the title. Likewise, the given raw will
only be matched against lexemes that are formed from the post's raw.
It's possible through an import or other means to have images larger
than the current max allowed image size in the db.
If this happens the thumbnail generation job will keep running
indefinitely trying to download a new copy of the original but
discarding it because it is larger than the max_file_size eventually
causing this error
`Job exception: undefined method `path' for nil:NilClass`
because the newly downloaded image is now nil.
This fix stops the enqueuing of the `GenerateTopicThumbnails` job for
all images that happen to be larger than the max image size.
If any value, including nil, is passed in as an argument the default
won't be set, so we need to handle when a non-Array value is passed in
to the `generate_thumbnails!` method.
Andrei Prigorshnev
Josh Soref
Dan Ungureanu
Martin Brennan
Bianca Nenciu
Gerhard Schlager
Arpit Jalan
Krzysztof Kotlarek
David Taylor
Mark VanLandingham
tshenry
Roman Rizzi
Daniel Waterworth
Guo Xiang Tan
Blake Erickson
Robin Ward
jbrw