This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
See https://meta.discourse.org/t/discourse-email-messages-are-incorrectly-threaded/233499
for thorough reasoning.
This commit changes how we generate Message-IDs and do email
threading for emails sent from Discourse. The main changes are
as follows:
* Introduce an outbound_message_id column on Post that
is either a) filled with a Discourse-generated Message-ID
the first time that post is used for an outbound email
or b) filled with an original Message-ID from an external
mail client or service if the post was created from an
incoming email.
* Change Discourse-generated Message-IDs to be more consistent
and static, in the format `discourse/post/:post_id@:host`
* Do not send References or In-Reply-To headers for emails sent
for the OP of topics.
* Make sure that In-Reply-To is filled with either a) the OP's
Message-ID if the post is not a direct reply or b) the parent
post's Message-ID
* Make sure that In-Reply-To has all referenced post's Message-IDs
* Make sure that References is filled with a chain of Message-IDs
from the OP down to the parent post of the new post.
We also are keeping X-Discourse-Post-Id and X-Discourse-Topic-Id,
headers that we previously removed, for easier visual debugging
of outbound emails.
Finally, we backfill the `outbound_message_id` for posts that have
a linked `IncomingEmail` record, using the `message_id` of that record.
We do not need to do that for posts that don't have an incoming email
since they are backfilled at runtime if `outbound_message_id` is missing.
The `add_column` `limit` parameter has no effect on a postgres `text` column. Instead we can perform the check in ActiveRecord.
We never expect this condition to be hit - users cannot control this value. It's just a safety net.
Adds limits to location and website fields at model and DB level
to match the bio_raw field limits. A limit cannot be added at the
DB level for bio_raw because it is a postgres text field.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
We previously had a system which would generate a 10x10px preview of images and add their URLs in a data-small-upload attribute. The client would then use that as the background-image of the `<img>` element. This works reasonably well on fast connections, but on slower connections it can take a few seconds for the placeholders to appear. The act of loading the placeholders can also break or delay the loading of the 'real' images.
This commit replaces the placeholder logic with a new approach. Instead of a 10x10px preview, we use imagemagick to calculate the average color of an image and store it in the database. The hex color value then added as a `data-dominant-color` attribute on the `<img>` element, and the client can use this as a `background-color` on the element while the real image is loading. That means no extra HTTP request is required, and so the placeholder color can appear instantly.
Dominant color will be calculated:
1. When a new upload is created
2. During a post rebake, if the dominant color is missing from an upload, it will be calculated and stored
3. Every 15 minutes, 25 old upload records are fetched and their dominant color calculated and stored. (part of the existing PeriodicalUpdates job)
Existing posts will continue to use the old 10x10px placeholder system until they are next rebaked
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
Previously we were relying on a highly-customized version of the unmaintained Barber gem for theme template compilation. This commit switches us to use our own DiscourseJsProcessor, which makes use of more modern patterns and will be easier to maintain going forward.
In summary:
- Refactors DiscourseJsProcessor to move multiline JS heredocs into a companion `discourse-js-processor.js` file
- Use MiniRacer's `.call` method to avoid manually escaping JS strings
- Move Theme template AST transformers into DiscourseJsProcessor, and formalise interface for extending RawHandlebars AST transformations
- Update Ember template compilation to use a babel-based approach, just like Ember CLI. This gives each template its own ES6 module rather than directly assigning `Ember.TEMPLATES` values
- Improve testing of template compilation (and move some tests from `theme_javascript_compiler_spec.rb` to `discourse_js_processor_spec.rb`
It used to return the next URL anyway which lead to an additional
request. On the frontend, if the result set was empty, it kept retrying
until at least one result was returned. This bug is fixed in this commit
too.
* FIX: hide welcome topic banner as soon as the welcome topic is edited
This commit adds a message bus listener on client to hide the welcome
topic banner as soon as the welcome topic is edited.
* update test
* only subscribe when show_welcome_topic_banner is true
* Do not lookup for messageBus service if it's not required
* Remove unneeded code
* Cache result for Site.show_welcome_topic_banner
* Update tests per latest changes
* Changes per PR review
Each new user menu notifications should have their own count. Therefore, we need to include all types to serializer and not only `grouped_unread_high_priority_notifications`
Additional PR will be created for chat and assign plugin, as they will have to switch to `grouped_unread_notifications` as well.
The source-of-truth for our ember version is now the installed node_module. The `ember_source` gem carries an old version of Ember and so the constant is no longer useful. We'll be dropping the gem soon.
This commit makes a number of improvements to the DiscourseJsProcessor:
1. Remove dependence on the out-of-date Ember template compiler from the ember-rails gem; switch to modern template compiler
2. Refactor to make use of a proper module system with `define`/`require`
3. Introduce `babel-plugin-ember-template-compilation` to enable inline hbs compilation
The `mini-loader` is upgraded to support relative lookup and `require.has`, so that these new JS packages work correctly.
If a topic is converted to a private message, all posters were invited
to the new private message. This included users who only whispered or
posted small actions.
Topic allowed user records were created for small actions, which lead to
the system user being invited in many private topics when the user
removed themselves or if a group was invited but some members already
had access.
This commits skips creating topic allowed user. They are already skipped
for the whisper posts.
If a user was granted a trust level, joined a group that granted a trust
level and left the group, the trust level was reset. This commit tries
to restore the last known trust level before joining the group by
looking into staff logs.
This commit also migrates old :change_trust_level user history records
to use previous_value and new_value fields.
When preloading topic_list data we were giving it a 'preload key' which was loosely based on the parameters of the list. However, it did not include all parameters, and mismatches between client/server-side logic would cause the preloaded data to be ignored.
This commit simplifies things by using a single key for all topic_list preloading. This works on the assumption that "The first topic_list the JS app will load is the one which was preloaded". That assumption also existed to some extent in the old design, so we don't expect any regressions here.
Default sidebar tags for not authenticated users can be defined in admin panel. Otherwise, top 5 categories and tags are taken.
Optionally, if categories are set up in permanent order, then the first 5 categories are taken.
```
1) CurrentUserSerializer#sidebar_category_ids includes visible default sidebar categories
Failure/Error: expect(json[:sidebar_category_ids]).to eq([category.id, category_2.id])
expected: [378, 379]
got: [379, 378]
```
Note that in the Ruby doc it says "The order is preserved from the original array". In this case, we want to preserve the order of the site setting.
Handles edge-case when a user is an admin and has an associated reviewable. Hitting this exception should be rare since we clear the reviewable when
granting staff to the user.
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
Some of the changes in this PR are extracted from https://github.com/discourse/discourse/pull/17379.
Similar to the bookmarks tab in the new user menu, the messages tab also displays a mix of notifications and messages. When there are unread message notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with a list of the user's messages. The bubble/badge count on the messages tab indicates how many unread message notifications there are.
This is a much better description of its function. It performs idempotent normalization of a URL. If consumers truly need to `encode` a URL (including double-encoding of existing encoded entities), they can use the existing `.encode` method.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Currently we can’t add a case-sensitive watched word if another one
exists with a different case. For example, the existing watched word
`Meta` has been created and is case-sensitive. Now an admin tries to add
`metA` while marking it as case-sensitive too, this won’t work and the
word won’t be added.
This patch changes this behavior by allowing to add same words that have
different cases, so the example above will now work as expected.
We still check for uniqueness but case-sensitivy is now taken
into account. It means that if the watched word `meta` already exists
and is not case-sensitive then it will not be possible to add `Meta`
(case-sensitive or not) as `meta` already matches every possible
variations of this word.
Follow-up to ce9eec8606.
I did a last-minute refactoring before merging the commit above where I extracted the Message Bus publish call into a new method, but forgot to delete the publish call after adding a call to the new method.
The content from the remote site and the footer get cached for 10 minutes, so Discourse should use the default locale instead of the user locale for the footer. Otherwise Discourse might cache the message in a different language.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
Relative URLs will work just fine for Web Workers, which were the original reason for introducing the `theme_uploads_local` feature
Making them relative will mean that `loadScript()` automatically uses the CDN (when enabled), which is doubly important because our CSP doesn't allow loading theme-javascripts from the host domain when the CDN is enabled.
When viewing a topic, we execute two queries to fetch the topic's
public topic timer and slow mode timer. The former query happens to be
able to use a unique index but the latter has to do a seq scan which is
slow. The query itself is not expensive but since viewing a topic is a
hot path, the little cuts add up overtime and the query itself
contributes significantly to the load of the database.
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
The previous method for reused the PrettyText logic which applied the
watched word logic, but had the unwanted effect of cooking the text too.
This meant that regular text values were converted to HTML.
Follow up to commit 5a4c35f627.
Our theme system is very complex and it can take a while to figure out how to invalidate the various types of caches that are used throughout the theme system. So, having a single helper method that invalidates everything can be useful in emergency situations where there is no time to read through the code and figure out how to clear the various caches.
Internal ticket: t64732.
The invites should be redeemed during the signup process. This was a
problem because when user tried to redeem an admin invite it tried to
authenticate the user using information from the session that was not
available.
This commit introduces a new plugin API to register
a group of stats that will be included in about.json
and also conditionally in the site about UI at /about.
The usage is like this:
```ruby
register_about_stat_group("chat_messages", show_in_ui: true) do
{
last_day: 1,
"7_days" => 10,
"30_days" => 100,
count: 1000,
previous_30_days: 120
}
end
```
In reality the stats will be generated any way the implementer
chooses within the plugin. The `last_day`, `7_days`, `30_days,` and `count`
keys must be present but apart from that additional stats may be added.
Only those core 4 stat keys will be shown in the UI, but everything will be shown
in about.json.
The stat group name is used to prefix the stats in about.json like so:
```json
"chat_messages_last_day": 2322,
"chat_messages_7_days": 2322,
"chat_messages_30_days": 2322,
"chat_messages_count": 2322,
```
The `show_in_ui` option (default false) is used to determine whether the
group of stats is shown on the site About page in the Site Statistics
table. Some stats may be needed purely for reporting purposes and thus
do not need to be shown in the UI to admins/users. An extension to the Site
serializer, `displayed_about_plugin_stat_groups`, has been added so this
can be inspected on the client-side.
* FIX: properly validate multiselect user fields on user creation
* Add test cases
* FIX: don't check multiselect user fields for watched words
* Clarifiy/simplify tests
* Roll back apply_watched_words changes
Since this method no longer needs to deal with arrays for now. If/when
we add new user fields which uses them, we can deal with it then.
All `DistributedCache` instances in Discourse are automatically keyed on the `Discourse.git_version`. Normally the theme compiler version is updated via a commit, and everything is fine. However, in some situations, it's possible for the BASE_COMPILER_VERSION to change without a change to the git_version (e.g. when applying patches directly to the codebase).
This commit adds the `BASE_COMPILER_VERSION` to the DistributedCache key to ensure that content from different compiler versions does not leak into other processes.
The `unread_not_too_old` attribute is a little odd because there should never be a case where
the user's first_unread_at column is less than the `Topic#updated_at`
column of an unread topic. The `unread_not_too_old` attribute is causing
a bug where topic states synced into `TopicTrackingState` do not appear
as unread because the attribute does not exsist on a normal `Topic`
object and hence never set.
It makes more sense to use user_ids for the UserCommScreener
introduced in fa5f3e228c since
in most cases the ID will be available, not the username. This
was discovered while starting work on a plugin that will
use this. In the cases where only usernames are available
the extra query is negligble.
The idea behind this refactor is to centralise all of the user ignoring / muting / disallow PM checks in a single place, so they can be used consistently in core as well as for plugins like chat, while improving the main bulk of the checks to run in a single fast non-AR query.
Also fixed up the invite error when someone is muting/ignoring the user that is trying to invite them to the topic.
Currently we only apply watched words of the `Block` type to custom user
fields and user profile fields.
This patch enables all rules to be applied such as `Censor` or
`Replace`.
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
Updates automatically data on the stats section of the topic.
It will update automatically the following information: likes, replies and last reply (timestamp and user)
We have a `cleanup!` class method on bookmarks that deletes
bookmarks X days after their related record (post/topic) are
deleted. This commit changes this method to use the
registered_bookmarkables for this instead, and each bookmarkable
type can delete related bookmarks in their own way.
In certain situations, a logged in user can redeem an invite with an email that
either doesn't match the invite's email or does not adhere to the email domain
restriction of an invite link. The impact of this flaw is aggrevated
when the invite has been configured to add the user that accepts the
invite into restricted groups.
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
This is pre-request work to introduce a splash screen while site assets load.
The only change this commit introduces is that it ensures we add the defer attribute to core/plugin/theme .JS files. This will allow us to insert markup before the browser starts evaluating those scripts later on. It has no visual or functional impact on core.
This will not have any impact on how themes and plugins work. The only exception is themes loading external scripts in the </head> theme field directly via script tags. Everything will work the same but those would need to add the defer attribute if they want to keep the benefits introduced in this PR.
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
When sending emails with delivery_method_options -> return_response
set to true, the SMTP sending code inside Mail will return the SMTP
response when calling deliver! for mail within the app. This commit
ensures that Email::Sender captures this response if it is returned
and stores it against the EmailLog created for the sent email.
A follow up PR will make this visible within the admin email UI.
The query is very inefficient without any constraints on large sites and
the average of all time to first response since the beginning of time is
not useful as well.
We do not zero-pad our base62 short URLs, so there is no guarantee that the length is 27. Instead, let's greedily match all consecutive base62 characters and look for a matching upload.
This reverts bd32656157 and 36f5d5eada.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This reverts one of the changes introduced just now in:
27d7b0c6de
I don't think we need this `activated_not_suspended_not_staged` scope
because we can just compose it ourselves via method chaining like
`User.activated.not_suspended.not_staged`.
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
* FIX: Email Send post has already been taken error
Adding a failing test first before coming up with a good solution.
Related: 357011eb3b
The above commit changed
```
PostReplyKey.find_or_create_by_safe!
```
to
```
PostReplyKey.create_or_find_by!
```
But I don't think it is working as a 1-1 replacement because of the
`Validation failed: Post has already been taken` error we are receiving
with this change. Also we need to make sure we don't re-introduce any
concurrency issues.
Reported: https://meta.discourse.org/t/224706/13
* Remove rails unique constraint and rely on db index
I believe this is what is causing `create_or_find_by!` to fail. Because
we have a unique constraint in the db I think we can remove this rails
unique constraint?
* clean up spec wording
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
When a site has `SiteSetting.invite_only` enabled, we create a
`ReviewableUser`record when activating a user if the user is not
approved. Therefore, we need to approve the user when redeeming an
invite.
There are some uncertainties surrounding why a `ReviewableRecord` is
created for a user in an invites only site but this commit does not seek
to address that.
Follow-up to 7c4e2d33fa
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previously this mapping of **cooked** images was only being run for oneboxes. Now it runs for all images, so we can transform hotlinked images without needing to immediately update `raw`
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
This allows the category_id filter for the bookmark
report to work with polymorphic bookmarks. Honestly this
is a little hardcode-y at the moment but until we go and
make this report a lot more flexible with more filters
I don't think it's worth the work to add extra interfaces
to RegisteredBookmarkable and BaseBookmarkable to make
this more flexible. This is enough for now.
We have not used anything related to bookmarks for PostAction
or UserAction records since 2020, bookmarks are their own thing
now. Deleting all this is just cleaning up old cruft.
Latest redis interoduces a block form of multi / pipelined, this was incorrectly
passed through and not namespaced.
Fix also updates logster, we held off on upgrading it due to missing functions
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
We're adding this column now in preparation for a future commit(s) that will
redesign the avatar/notifications menu. The reason the column is added in a
separate commit is because the redesign changes are going to be complex with a
high risk of getting (temporarily) reverted and if they included a database
migration, they wouldn't revert cleanly/easily.
Internal ticket: t65045.
When a user views a topic that contains a topic timer to publish to a
restricted category, an error occurs on the client side because the user
does not have access to information about the category.
This commit fixes it such that the topic timer is not shown to the user
if the user does not have access to the category.
On some installations, this would fail with 'index row size exceeds btree version 4 maximum'. This commit replaces the (post_id, url)` index with a `(post_id, md5(url))` index, which is much more space efficient.
This will make future changes to the 'pull hotlinked images' system easier. This commit should not introduce any functional change.
For now, the old post_custom_field data is kept in the database. This will be dropped in a future commit.
This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
* hidden siteSetting to enable experimental sidebar
* user preference to enable experimental sidebar
* `experimental_sidebar_enabled` attribute for current user
* Empty glimmer component for Sidebar
We were calling `dup` on the hash and using that to check for changes. However, we were not duplicating the values, so changes to arrays or nested hashes would not be detected.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
Previously, 'crop' would resize the image to have the requested width, then crop the height to the requested value. This works when cropping images vertically, but not when cropping them horizontally.
For example, trying to crop a 500x500 image to 200x500 was actually resulting in a 200x200 image. Having an OptimizedImage with width/height columns mismatching the actual OptimizedImage width/height causes some unusual issues.
This commit ensures that a call to `OptimizedImage.crop(from, to, width, height)` will always return an image of the requested width/height. The `w x h^` syntax defines minimum width/height, while maintaining aspect ratio.
This commit fixes two issues at play. The first was introduced
in f6c852b (or maybe not introduced
but rather revealed). When a user posted a new message in a topic,
they received the unread topic tracking state MessageBus message,
and the Unread (X) indicator was incremented by one, because with the
aforementioned perf commit we "guess" the correct last read post
for the user, because we no longer calculate individual users' read
status there. This meant that every time a user posted in a topic
they tracked, the unread indicator was incremented. To get around
this, we can just exclude the user who created the post from the
target users of the unread state message.
The second issue was related to the private message topic tracking
state, and was somewhat similar. Whenever a user created a new private
message, the New (X) indicator was incremented, and could not be
cleared until the page was refreshed. To solve this, we just don't
update the topic state for the user when the new_topic tracking state
message comes through if the user who created the topic is the
same as the current user.
cf. https://meta.discourse.org/t/bottom-of-topic-shows-there-is-1-unread-remaining-when-there-are-actually-0-unread-topics-remaining/220817
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
This commit improves the logic for rolling up IPv4 screened IP
addresses and extending it for IPv6. IPv4 addresses will roll up only
up to /24. IPv6 can rollup to /48 at most. The log message that is
generated contains the list of original IPs and new subnet.
* FEATURE: Let sites add a sitemap.xml file.
This PR adds the same features discourse-sitemap provides to core. Sitemaps are only added to the robots.txt file if the `enable_sitemap` setting is enabled and `login_required` disabled.
After merging discourse/discourse-sitemap#34, this change will take priority over the sitemap plugin because it will disable itself. We're also using the same sitemaps table, so our migration won't try to create it
again using `if_not_exists: true`.
It's possible in Rails to map a single route to multiple controller
actions with different constraints. We do this in at least 1 place in
our application for the root route (/) to make it possible to change the
page that root route displays.
This means that if you get the list of routes of your application,
you'll get the same route for each time the route is defined. And if
there's an API scope for 2 (or more) controller actions that map to the
same route, the route will be listed twice in the Allowed URLs list of
the scope.
To prevent this, this PR adds the allowed URLs in a set so that
duplicate routes are automatically removed.
The Allowed URLs list of an API scope only includes routes that
constraint the format for the route to JSON. However, some routes define
no format constraints, but that doesn't mean they can't be used by an
API key.
This commit amends the logic for the Allowed URLs list so that it
includes routes that have no format constraints or the format
constraints include JSON.
Due to default CSP web workers instantiated from CDN based assets are still
treated as "same-origin" meaning that we had no way of safely instansiating
a web worker from a theme.
This limits the theme system and adds the arbitrary restriction that WASM
based components can not be safely used.
To resolve this limitation all js assets in about.json are also cached on
local domain.
{
"name": "Header Icons",
"assets" : {
"worker" : "assets/worker.js"
}
}
This can then be referenced in JS via:
settings.theme_uploads_local.worker
local_js_assets are unconditionally served from the site directly and
bypass the entire CDN, using the pre-existing JavascriptCache
Previous to this change this code was completely dormant on sites which
used s3 based uploads, this reuses the very well tested and cached asset
system on s3 based sites.
Note, when creating local_js_assets it is highly recommended to keep the
assets lean and keep all the heavy working in CDN based assets. For example
wasm files can still live on the CDN but the lean worker that loads it can
live on local.
This change unlocks wasm in theme components, so wasm is now also allowed
in `theme_authorized_extensions`
* more usages of upload.content
* add a specific test for upload.content
* Adjust logic to ensure that after upgrades we still get a cached local js
on save
Previously we only supported a single 'required tag group' for a category. This commit allows admins to specify multiple required tag groups, each with their own minimum tag count.
A new category_required_tag_groups database table replaces the existing columns on the categories table. Data is automatically migrated.
This patch removes some of our freedom patches that have been deprecated
for some time now.
Some of them have been updated so we’re not shipping code based on an
old version of Rails.
Via the API it is possible to create a user with an integer username. So
123 instead of "123". This causes the following 500 error:
```
NoMethodError (undefined method `unicode_normalize' for 1:Integer)
app/models/user.rb:276:in `normalize_username'
```
See: https://meta.discourse.org/t/222281
Previous to this change if any of the assets were not allowed extensions
they would simply be silently ignored, this could lead to broken themes
that are very hard to debug
Our group fabrication creates groups with name "my_group_#{n}" where n
is the sequence number of the group being created. However, this can
cause the test to be flaky if and when a group with name `my_group_10`
is created as it will be ordered before
`my_group_9`. This commits makes the group names determinstic to
eliminate any flakiness.
This reverts commit 558bc6b746.
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
Tags (and tag groups) can be configured so that they can only be used in specific categories and (optionally) restrict topics in these categories to be able to add/use only these tags. These restrictions work as expected when a topic is created without going through the review queue; however, if the topic has to be reviewed by a moderator then these restrictions currently aren't checked before the topic is sent to the review queue, but they're checked later when a moderator tries to approve the topic. This is because if a user manages to submit a topic that doesn't meet the restrictions, moderators won't be able to approve and it'll be stuck in the review queue.
This PR prevents topics that don't meet the tags requirements from being sent to the review queue and shows the poster an error message that indicates which tags that cannot be used.
Internal ticket: t60562.
As we are gradually moving to having a polymorphic
bookmarkable relationship on the Bookmark table,
we need to make the post_id column nullable to be
able to develop and test the new columns, and
for cutover/migration purposes later as well.
PostAnalyzer and CookedPostProcessor both replace URLs with oneboxes.
PostAnalyzer did not use the max_oneboxes_per_post site and setting and
CookedPostProcessor replaced at most max_oneboxes_per_post URLs ignoring
the oneboxes that were replaced already by PostAnalyzer.
This commit is a redo of2f1ddadff7dd47f824070c8a3f633f00a27aacde
which we reverted because it blew up an internal CI check. I looked
into it, and it happened because the old migration to add the bookmark
columns still existed, and those columns were dropped in a post migrate,
so the two migrations to add the columns were conflicting before
the post migrate was run.
------
This commit only includes the creation of the new columns and index,
and does not add any triggers, backfilling, or new data.
A backfill will be done in the final PR when we switch this over.
Intermediate PRs will look something like this:
Add an experimental site setting for using polymorphic bookmarks,
and make sure in the places where bookmarks are created or updated
we fill in the columns. This setting will be used in subsequent
PRs as well.
Listing and searching bookmarks based on polymorphic associations
Creating post and topic bookmarks using polymorphic associations,
and changing special for_topic logic to just rely on the Topic
bookmarkable_type
Querying bookmark reminders based on polymorphic associations
Make sure various other areas like importers, bookmark guardian,
and others all rely on the associations
Prepare plugins that rely on the Bookmark model to use polymorphic
associations
The final core PR will remove all the setting gates and switch over
to using the polymorphic associations, backfill the bookmarks
table columns, and ignore the old post_id and for_topic colummns.
Then it will just be a matter of dropping the old columns down the
line.
This commit is a redo of e21c640a3c
which we reverted to not include half-done work in a release.
This commit is slightly different though, in that it only includes
the creation of the new columns and index, and does not add any
triggers, backfilling, or new data.
A backfill will be done in the final PR when we switch this over.
Intermediate PRs will look something like this:
1. Add an experimental site setting for using polymorphic bookmarks,
and make sure in the places where bookmarks are created or updated
we fill in the columns. This setting will be used in subsequent
PRs as well.
2. Listing and searching bookmarks based on polymorphic associations
3. Creating post and topic bookmarks using polymorphic associations,
and changing special for_topic logic to just rely on the Topic
bookmarkable_type
4. Querying bookmark reminders based on polymorphic associations
5. Make sure various other areas like importers, bookmark guardian,
and others all rely on the associations
6. Prepare plugins that rely on the Bookmark model to use polymorphic
associations
The final core PR will remove all the setting gates and switch over
to using the polymorphic associations, backfill the bookmarks
table columns, and ignore the old post_id and for_topic colummns.
Then it will just be a matter of dropping the old columns down the
line.
Plugins like chat add custom score type to override the title in the UI, but that should be reserved for situations when you need to manage the flag priority separately, which is configurable in the queue settings page.
Currently, if a plugin creates a custom score type, it won't be able to associate a priority, so there's no real gain from doing so. Priorities are tightly related to post-action types, which is something we might want to revise. For now, this change lets plugins move away from custom score types without compromises.
The meaning of reminder_at and reminder_last_sent_at changed after
commit 6d422a8033. A bookmark reminder
will fire only if reminder_last_sent_at is null, but before that it
fired everytime reminder_at was set. This is no longer true because
sometimes reminder_at continues to exist even after a reminder fired.
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
In the API keys page where admins can create API keys with restricted scopes, each scope shows a list of URLs that it allows. But currently, this list of allowed URLs shows incomplete URLs for scopes that are added by plugins. For example, the allowed URL for the "run queries" scope of the data-explorer plugin is shown as `/queries/:id/run` when the correct URL for this scope is `/admin/plugins/explorer/queries/:id/run`. The first 3 segments of the path are the mount path of the plugin's engine and it's missing because the routes set of the engine doesn't include the mount path. To fix this, this commit gets the mount path and prepends it to the URL so the complete URL is shown to the user.
It's not possible to write tests for this change because plugins are not loaded in the test environment by default when core's tests suite is running.
The user can select what happens with a bookamrk after it expires. New
option allow bookmark's reminder to be kept even after it has expired.
After a bookmark's reminder notification is created, the reminder date
will be highlighted in red until the user resets the reminder date.
User can do that using the new Clear Reminder button from the dropdown.
This change adds support for the categories endpoint to have an api
scope. Only adds GET scope for listing categories and for fetching a
single category.
See: https://meta.discourse.org/t/218080/4
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
Previously cached counting made redis calls in main thread and performed
the flush in main thread.
This could lead to pathological states in extreme heavy load.
This refactor reduces load and cleans up the interface
Previously we were publishing one messagebus message per user which was 'tracking' a topic. On large sites, this can easily be 1000+ messages. The important information in the message is common between all users, so we can manage with a single message on a shared channel, which will be much more efficient.
For user-specific values (notification_level and last_read_post_number), the JS app can infer values which are 'good enough'. Correct values will be loaded as soon as a topic-list containing the topic is visited.
aa1442fdc3 split theme stylesheets so that every component gets its own stylesheet. Therefore, there is now no need for parent themes to collate the settings/variables of its children during scss compilation.
Technically this is a breaking change for any themes which depend on the settings/variables of their child components. That was never a supported/recommended arrangement, so we don't expect this to cause issues.
If a theme is updated to introduce a new setting AND immediately make use of it in a stylesheet, then an error was being shown. This is because the stylesheet compilation was using the theme's cached settings, and the cache is only cleared **after** the theme has finished compiling.
This commit updates the SCSS compilation to use uncached values for settings. A similar fix was applied to other parts of theme compilation back in 2020: (a51b8d9c66)
The previous Discourse.cache usage was different to how other theme-related caching is handled, and also requires reaching out to redis every time. The common theme cache is held in memory (as a DistributedCache)
This commit makes sure that the email log's bounce_error_code
conforms to the SMTP error code RFC on save, so that
it is always in the format X.X.X or XXX without any
additional string details. Also included is a migration
to fix this issue for past records.
Similar site settings exist for likes and edits and the new ones work
in a similar way.
By default, users below TL2 have a limit of 20, the limit is increased
by 1.5 for TL2 users up to 30, by 2 for TL3 users up to 40 and by 3 for
TL4 users up to 60.
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
Martin Brennan
David Taylor
Loïc Guitaut
Joffrey JAFFEUX
Osama Sayegh
Gerhard Schlager
Bianca Nenciu
Arpit Jalan
Alan Guo Xiang Tan
Krzysztof Kotlarek
Isaac Janzen
Roman Rizzi
Andrei Prigorshnev
Selase Krakani
Vinoth Kannan
Jarek Radosz
Jean
Leonardo Mosquera
Jordan Vidrine
Sam
Sérgio Saquetim
Rafael dos Santos Silva
Joe
Blake Erickson
Daniel Waterworth
Angus McLeod
Mark VanLandingham
Dan Ungureanu
Penar Musaraj
Jeff Wong
Michael Brown