FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
When finding the candidates for `Topic.similar_to`, we will now ignore
topics in categories where `Category#search_priority` has been set to
ignore and also topics in categories which the user has specifically
muted.
Internal Ref: /t/87132
When a screened IP address is matched because it is either blocked or
allowed it should update match_count. This did not work because it
tried to validate the IP address and it failed as it matched with
itself.
Previously we would trigger the event before the `Topic#deleted_at`
column has been updated making it hard for plugins to correctly work
with the model when its new state has not been persisted in the
database.
* FIX: Only modify secured sidebar links on user promotion/demotion
If a user is created populate their sidebar with the default
categories/tags that they have access to.
If a user is promoted to admin populate any new categories/tags that
they now have access to.
If an admin is demoted remove any categories/tags that they no longer
have access to.
This will only apply for "secured" categories. For example if these are
the default sitebar categories:
- general
- site feedback
- staff
and a user only has these sidebar categories:
- general
when they are promoted to admin they will only receive the "staff"
category. As this is a default category they didn't previously have
access to.
* Add spec, remove tag logic on update
Change it so that if a user becomes unstaged it used the "add" method
instead of the "update" method because it is essentially following the
on_create path.
On admin promotion/demotion remove the logic for updating sidebar tags because
we don't currently have the tag equivalent like we do for User.secure_categories.
Added the test case for when a user is promoted to admin it should
receive *only* the new sidebar categories they didn't previously have
access to. Same for admin demotion.
* Add spec for suppress_secured_categories_from_admin site setting
* Update tags as well on admin promotion/demotion
* only update tags when they are enabled
* Use new SidebarSectionLinkUpdater
We now have a SidebarSectionLinkUpdater
that was introduced in: fb2507c6ce
* remove empty line
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
This PR adds separate notification indicators for PMs and reviewables that have arrived since the last time the user opened the notifications menu.
The PM indicator is the strongest one of all three indicators followed by the reviewable indicator and then finally the blue indicator. This means that if there's a new PM and a new reviewable, then the PM indicator will be shown.
Meta topic: https://meta.discourse.org/t/no-green-or-red-notification-bubbles/242783?u=osama.
Internal topic: t/82995.
While load testing our user creation code path in production, we
identified that executing the DB statement to update the `Group#user_count` column within a
transaction is creating a bottleneck for us. This is because the
creation of a user and addition of the user to the relevant groups are
done in a transaction. When we execute the DB statement to update
`Group#user_count` for the relevant group, a row level lock is held
until the transaction completes. This row level lock acts like a global
lock when the server is creating users that will be added to the same
group in quick succession.
Instead of updating the counter cache within a transaction which the
default ActiveRecord `counter_cache` option does, we simply update the
counter cache outside of the committing transaction.
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
This commit introduce a new API for registering callbacks, which we'll execute when a user gets destroyed, and the `delete_posts` opt is true. The chat plugin registers one callback and queues a job to destroy every message from that user in batches.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
The hidden site setting `suppress_secured_categories_from_admin` will
suppress visibility of categories without explicit access from admins
in a few key areas (category drop downs and topic lists)
It is not intended to be a security wall since admins can amend any site
setting. Instead it is feature that allows hiding the categories from the
UI.
Admins will still be able to see topics in categories without explicit
access using direct URLs or flags.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit adds some protections in InviteRedeemer to ensure that email
can never be nil, which could cause issues with inviting the invited
person to private topics since there was an incorrect inner join.
If the email is nil and the invite is scoped to an email, we just use
that invite.email unconditionally. If a redeeming_user (an existing
user) is passed in when redeeming an email, we use their email to
override the passed in email. Otherwise we just use the passed in
email. We now raise an error after all this if the email is still nil.
This commit also adds some tests to catch the private topic fix, and
some general improvements and comments around the invite code.
This commit also includes a migration to delete TopicAllowedUser records
for users who were mistakenly added to topics as part of the invite
redemption process.
It is likely that a new admin user was created as just a regular user
before being promoted to admin so this change will update the sidebar
link records for any users that are promoted to admin. This way if any
of the default side bar categories or tags are restricted to admins
these new admins will have those added to their sidebar as well.
You can easily replicate this issue locally (prior to this fix) by using
`rails admin:create` where it creates a user first, then it is promoted
to admin. This means it would receive the default categories of regular
user, but never receive the ones they should have access to as an admin.
As part of this change I did drop the `!` from
`SidebarSectionLink.insert_all` so that it would add any new records
that were missing, but not throw a unique constraint error trying to add
any existing records.
Follow up to: 1b56a55f50
And: e320bbe513
Previously, we didn't have a site-wide setting to set the default behavior for user profile visibility and user presence features. But we already have a user preference for that.
This commit fixes a regression introduced in 8979adc where under certain conditions the groups syncing logic in Discourse Connect would try to add users to groups they're already members of and cause errors when users try to sign in using Discourse Connect.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Discourse Connect can be used to manage group memberships of users by including a `add_groups`, `remove_groups` or `groups` attribute in the Discourse Connect payload. However, additions/deletions of users from groups aren't logged to the groups logs (available at `/g/<group>/manage/logs`) which can cause confusions to admins they try to figure out when/how users were added or removed from a group. This commit makes Discourse Connect add entries to the groups logs when it makes changes to users' group memberships.
Theme javascript is now minified using Terser, just like our core/plugin JS bundles. This reduces the amount of data sent over the network.
This commit also introduces sourcemaps for theme JS. Browser developer tools will now be able show each source file separately when browsing, and also in backtraces.
For theme test JS, the sourcemap is inlined for simplicity. Network load is not a concern for tests.
Previously, compiling theme 'extra_js' was done with a number of steps. Each theme_field would be compiled into its own value_baked column, and then the JavascriptCache content would be built by concatenating all of those compiled values.
This commit streamlines things by removing the value_baked step. The raw value of all extra_js theme_fields are passed directly to the ThemeJavascriptCompiler, and then the result is stored in the JavascriptCache.
In itself, this commit should not cause any behavior change. It is designed to open the door to more advanced compilation features which have interdependencies between different source files (e.g. template colocation, sourcemaps).
The previous implementation would attempt to fetch groups using the end-user's Google auth token. This only worked for admin accounts, or users with 'delegated' access to the `admin.directory.group.readonly` API.
This commit changes the approach to use a single 'service account' for fetching the groups. This removes the need to add permissions to all regular user accounts. I'll be updating the [meta docs](https://meta.discourse.org/t/226850) with instructions on setting up the service account.
This is technically a breaking change in behavior, but the existing implementation was marked experimental, and is currently unusable in production google workspace environments.
This commit fixes an issue where we had a typo in the
UserAction.stream query which meant that action_code_path
was not loaded correctly. Once that was fixed, we were also
not actually using the action_code_path in the user-stream-item,
so that has been fixed here too.
The bug this caused was that, when the link for the action was
clicked within the user-stream-item, the user would be redirected
to a URL ending with `[missing%20%%7Bpath%7D%20value]` because
the I18n call did not have the path present.
* FIX: Reset related site settings on general category delete
If the new seeded General category is deleted we also need to delete the
corresponding site setting for it so that we don't try and reference it.
This fixes a bug in the category dropdown composer.
This change creates the `clear_related_site_settings` after destroy
hook that could also be used by other features in the future, like maybe
when we have a `default_category_id` site_setting.
Looks like if `nil` out a site setting it is set to `0`?
```
[9] pry(main)> SiteSetting.general_category_id = nil
SiteSetting Load (0.4ms) SELECT "site_settings".* FROM "site_settings" WHERE "site_settings"."name" = 'general_category_id' LIMIT 1
=> nil
[10] pry(main)> SiteSetting.general_category_id
=> 0
```
That is why the tests check if the value is `< 1` and not `nil`.
* Use -1 instead of nil because it is the default
The previous fix in e83d35d6 was incorrect, and the stub in the test was never actually hit. This commit moves the error handling to the right place and updates the specs to ensure the stub is always used.
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
Adds a new upload field for a second dark mode category logo.
This alternative will be used when the browser is in dark mode (similar to the global site setting for a dark logo).
These errors tend to indicate that the upload is missing on the remote store. This is bad, but we don't want it to block the dominant-color calculation process. This commit catches errors when there is an HTTP error, and fixes the `base_store.rb` implementation when `FileHelper.download` returns nil.
cf. e62e93f83a
This PR also makes it so `bot` (negative ID) and `system` users are always allowed
to send PMs, since the old conditional was just based on `enable_personal_messages`
* FEATURE: Make General the default category
* Set general as the default category in the composer model instead
* use semicolon
* Enable allow_uncategorized_topics in create_post spec helper for now
* Check if general_category_id is set
* Enable allow_uncategorized_topics for test env
* Provide an option to the create_post helper to not set allow_uncategorized_topics
* Add tests to check that category… is not present and that General is selected automatically
Currently, the reviewables tab in the user menu shows pending reviewables at the top of the menu and fills the remaining space in the menu with old/handled reviewables. This PR makes the revieables tab show only pending reviewables and hides the tab altogether from the menu if there are no pending reviewables. We're going to follow-up with another change soon that will show pending reviewables in the main tab of the user menu.
Internal topic: t/73220.
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
The `add_column` `limit` parameter has no effect on a postgres `text` column. Instead we can perform the check in ActiveRecord.
We never expect this condition to be hit - users cannot control this value. It's just a safety net.
Adds limits to location and website fields at model and DB level
to match the bio_raw field limits. A limit cannot be added at the
DB level for bio_raw because it is a postgres text field.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
We previously had a system which would generate a 10x10px preview of images and add their URLs in a data-small-upload attribute. The client would then use that as the background-image of the `<img>` element. This works reasonably well on fast connections, but on slower connections it can take a few seconds for the placeholders to appear. The act of loading the placeholders can also break or delay the loading of the 'real' images.
This commit replaces the placeholder logic with a new approach. Instead of a 10x10px preview, we use imagemagick to calculate the average color of an image and store it in the database. The hex color value then added as a `data-dominant-color` attribute on the `<img>` element, and the client can use this as a `background-color` on the element while the real image is loading. That means no extra HTTP request is required, and so the placeholder color can appear instantly.
Dominant color will be calculated:
1. When a new upload is created
2. During a post rebake, if the dominant color is missing from an upload, it will be calculated and stored
3. Every 15 minutes, 25 old upload records are fetched and their dominant color calculated and stored. (part of the existing PeriodicalUpdates job)
Existing posts will continue to use the old 10x10px placeholder system until they are next rebaked
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
Previously we were relying on a highly-customized version of the unmaintained Barber gem for theme template compilation. This commit switches us to use our own DiscourseJsProcessor, which makes use of more modern patterns and will be easier to maintain going forward.
In summary:
- Refactors DiscourseJsProcessor to move multiline JS heredocs into a companion `discourse-js-processor.js` file
- Use MiniRacer's `.call` method to avoid manually escaping JS strings
- Move Theme template AST transformers into DiscourseJsProcessor, and formalise interface for extending RawHandlebars AST transformations
- Update Ember template compilation to use a babel-based approach, just like Ember CLI. This gives each template its own ES6 module rather than directly assigning `Ember.TEMPLATES` values
- Improve testing of template compilation (and move some tests from `theme_javascript_compiler_spec.rb` to `discourse_js_processor_spec.rb`
It used to return the next URL anyway which lead to an additional
request. On the frontend, if the result set was empty, it kept retrying
until at least one result was returned. This bug is fixed in this commit
too.
* FIX: hide welcome topic banner as soon as the welcome topic is edited
This commit adds a message bus listener on client to hide the welcome
topic banner as soon as the welcome topic is edited.
* update test
* only subscribe when show_welcome_topic_banner is true
* Do not lookup for messageBus service if it's not required
* Remove unneeded code
* Cache result for Site.show_welcome_topic_banner
* Update tests per latest changes
* Changes per PR review
Each new user menu notifications should have their own count. Therefore, we need to include all types to serializer and not only `grouped_unread_high_priority_notifications`
Additional PR will be created for chat and assign plugin, as they will have to switch to `grouped_unread_notifications` as well.
If a topic is converted to a private message, all posters were invited
to the new private message. This included users who only whispered or
posted small actions.
Topic allowed user records were created for small actions, which lead to
the system user being invited in many private topics when the user
removed themselves or if a group was invited but some members already
had access.
This commits skips creating topic allowed user. They are already skipped
for the whisper posts.
If a user was granted a trust level, joined a group that granted a trust
level and left the group, the trust level was reset. This commit tries
to restore the last known trust level before joining the group by
looking into staff logs.
This commit also migrates old :change_trust_level user history records
to use previous_value and new_value fields.
When preloading topic_list data we were giving it a 'preload key' which was loosely based on the parameters of the list. However, it did not include all parameters, and mismatches between client/server-side logic would cause the preloaded data to be ignored.
This commit simplifies things by using a single key for all topic_list preloading. This works on the assumption that "The first topic_list the JS app will load is the one which was preloaded". That assumption also existed to some extent in the old design, so we don't expect any regressions here.
Handles edge-case when a user is an admin and has an associated reviewable. Hitting this exception should be rare since we clear the reviewable when
granting staff to the user.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
* FEATURE: update bootstrap mode notice to add invite and wizard links
* Updates per feedback on PR
* Fix the wizard link not showing
* Remove unneeded function
* Remove router service injection
normalized_encode in addressable has a number of issues, including https://github.com/sporkmonger/addressable/issues/472
To temporaily work around those issues for the majority of cases, we try parsing with `::URI`. If that fails (e.g. due to non-ascii characters) then we will fall back to addressable.
Hopefully we can simplify this back to `Addressable::URI.normalized_encode` in the future.
This commit also adds support for unicode domain names and emoji domain names with escape_uri.
This removes an unneeded hack checking for pre-signed urls, which are now handled by the general case due to starting off valid and only being minimally normalized. Previous test case continues to pass.
UrlHelper.s3_presigned_url? which was somewhat wide was removed.
The new plugin list is based on the ones currently used in our ember-cli pipeline, and are based on our official browser support policy.
This commit includes an update to the raw-handlebars compiler to remove the 'very hacky but lets us use ES6' code. It's served us well for the last 6 years, but the babel config changes broke it (`const` -> `let`). This commit takes the opportunity to refactor it to take a similar approach to PrettyText, by leaning on `mini-loader.js`.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Currently we can’t add a case-sensitive watched word if another one
exists with a different case. For example, the existing watched word
`Meta` has been created and is case-sensitive. Now an admin tries to add
`metA` while marking it as case-sensitive too, this won’t work and the
word won’t be added.
This patch changes this behavior by allowing to add same words that have
different cases, so the example above will now work as expected.
We still check for uniqueness but case-sensitivy is now taken
into account. It means that if the watched word `meta` already exists
and is not case-sensitive then it will not be possible to add `Meta`
(case-sensitive or not) as `meta` already matches every possible
variations of this word.
Follow-up to ce9eec8606.
I did a last-minute refactoring before merging the commit above where I extracted the Message Bus publish call into a new method, but forgot to delete the publish call after adding a call to the new method.
The content from the remote site and the footer get cached for 10 minutes, so Discourse should use the default locale instead of the user locale for the footer. Otherwise Discourse might cache the message in a different language.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
The previous method for reused the PrettyText logic which applied the
watched word logic, but had the unwanted effect of cooking the text too.
This meant that regular text values were converted to HTML.
Follow up to commit 5a4c35f627.
The invites should be redeemed during the signup process. This was a
problem because when user tried to redeem an admin invite it tried to
authenticate the user using information from the session that was not
available.
This commit introduces a new plugin API to register
a group of stats that will be included in about.json
and also conditionally in the site about UI at /about.
The usage is like this:
```ruby
register_about_stat_group("chat_messages", show_in_ui: true) do
{
last_day: 1,
"7_days" => 10,
"30_days" => 100,
count: 1000,
previous_30_days: 120
}
end
```
In reality the stats will be generated any way the implementer
chooses within the plugin. The `last_day`, `7_days`, `30_days,` and `count`
keys must be present but apart from that additional stats may be added.
Only those core 4 stat keys will be shown in the UI, but everything will be shown
in about.json.
The stat group name is used to prefix the stats in about.json like so:
```json
"chat_messages_last_day": 2322,
"chat_messages_7_days": 2322,
"chat_messages_30_days": 2322,
"chat_messages_count": 2322,
```
The `show_in_ui` option (default false) is used to determine whether the
group of stats is shown on the site About page in the Site Statistics
table. Some stats may be needed purely for reporting purposes and thus
do not need to be shown in the UI to admins/users. An extension to the Site
serializer, `displayed_about_plugin_stat_groups`, has been added so this
can be inspected on the client-side.
* FIX: properly validate multiselect user fields on user creation
* Add test cases
* FIX: don't check multiselect user fields for watched words
* Clarifiy/simplify tests
* Roll back apply_watched_words changes
Since this method no longer needs to deal with arrays for now. If/when
we add new user fields which uses them, we can deal with it then.
Currently we only apply watched words of the `Block` type to custom user
fields and user profile fields.
This patch enables all rules to be applied such as `Censor` or
`Replace`.
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
Updates automatically data on the stats section of the topic.
It will update automatically the following information: likes, replies and last reply (timestamp and user)
We have a `cleanup!` class method on bookmarks that deletes
bookmarks X days after their related record (post/topic) are
deleted. This commit changes this method to use the
registered_bookmarkables for this instead, and each bookmarkable
type can delete related bookmarks in their own way.
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
This is pre-request work to introduce a splash screen while site assets load.
The only change this commit introduces is that it ensures we add the defer attribute to core/plugin/theme .JS files. This will allow us to insert markup before the browser starts evaluating those scripts later on. It has no visual or functional impact on core.
This will not have any impact on how themes and plugins work. The only exception is themes loading external scripts in the </head> theme field directly via script tags. Everything will work the same but those would need to add the defer attribute if they want to keep the benefits introduced in this PR.
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
We do not zero-pad our base62 short URLs, so there is no guarantee that the length is 27. Instead, let's greedily match all consecutive base62 characters and look for a matching upload.
This reverts bd32656157 and 36f5d5eada.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
When a site has `SiteSetting.invite_only` enabled, we create a
`ReviewableUser`record when activating a user if the user is not
approved. Therefore, we need to approve the user when redeeming an
invite.
There are some uncertainties surrounding why a `ReviewableRecord` is
created for a user in an invites only site but this commit does not seek
to address that.
Follow-up to 7c4e2d33fa
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
The cache was causing state to leak between tests since the `WatchedWord` record in the DB would have been rolled back but `WordWatcher` still had the word in the cache.
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
This allows the category_id filter for the bookmark
report to work with polymorphic bookmarks. Honestly this
is a little hardcode-y at the moment but until we go and
make this report a lot more flexible with more filters
I don't think it's worth the work to add extra interfaces
to RegisteredBookmarkable and BaseBookmarkable to make
this more flexible. This is enough for now.
We have not used anything related to bookmarks for PostAction
or UserAction records since 2020, bookmarks are their own thing
now. Deleting all this is just cleaning up old cruft.
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
`TestLogger` was responsible for some flaky specs runs:
```
Error during failsafe response: undefined method `debug' for #<TestLogger:0x0000556c4b942cf0 @warnings=1>
Did you mean? debugger
```
This commit also cleans up other uses of `FakeLogger`
This will make future changes to the 'pull hotlinked images' system easier. This commit should not introduce any functional change.
For now, the old post_custom_field data is kept in the database. This will be dropped in a future commit.
This commit introduces a new site setting: `use_name_for_username_suggestions` (default true)
Admins can disable it if they want to stop using Name values when generating usernames for users. This can be useful if you want to keep real names private-by-default or, when used in conjunction with the `use_email_for_username_and_name_suggestions` setting, you would prefer to use email-based username suggestions.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
When changing upload security using `Upload#update_secure_status`,
we may not have the context of how an upload is being created, because
this code path can be run through scheduled jobs. When calling
update_secure_status, the normal ActiveRecord validations are run,
and ours include validating extensions. In some cases the upload
is created in an automated way, such as user export zips, and the
security is applied later, with the extension prohibited from
use when normally uploading.
This caused the upload to fail validation on `update_secure_status`,
causing the security change to silently fail. This fixes the issue
by skipping the file extension validation when the upload security
is being changed.
Previously, 'crop' would resize the image to have the requested width, then crop the height to the requested value. This works when cropping images vertically, but not when cropping them horizontally.
For example, trying to crop a 500x500 image to 200x500 was actually resulting in a 200x200 image. Having an OptimizedImage with width/height columns mismatching the actual OptimizedImage width/height causes some unusual issues.
This commit ensures that a call to `OptimizedImage.crop(from, to, width, height)` will always return an image of the requested width/height. The `w x h^` syntax defines minimum width/height, while maintaining aspect ratio.
This commit fixes two issues at play. The first was introduced
in f6c852b (or maybe not introduced
but rather revealed). When a user posted a new message in a topic,
they received the unread topic tracking state MessageBus message,
and the Unread (X) indicator was incremented by one, because with the
aforementioned perf commit we "guess" the correct last read post
for the user, because we no longer calculate individual users' read
status there. This meant that every time a user posted in a topic
they tracked, the unread indicator was incremented. To get around
this, we can just exclude the user who created the post from the
target users of the unread state message.
The second issue was related to the private message topic tracking
state, and was somewhat similar. Whenever a user created a new private
message, the New (X) indicator was incremented, and could not be
cleared until the page was refreshed. To solve this, we just don't
update the topic state for the user when the new_topic tracking state
message comes through if the user who created the topic is the
same as the current user.
cf. https://meta.discourse.org/t/bottom-of-topic-shows-there-is-1-unread-remaining-when-there-are-actually-0-unread-topics-remaining/220817
This commit improves the logic for rolling up IPv4 screened IP
addresses and extending it for IPv6. IPv4 addresses will roll up only
up to /24. IPv6 can rollup to /48 at most. The log message that is
generated contains the list of original IPs and new subnet.
* FEATURE: Let sites add a sitemap.xml file.
This PR adds the same features discourse-sitemap provides to core. Sitemaps are only added to the robots.txt file if the `enable_sitemap` setting is enabled and `login_required` disabled.
After merging discourse/discourse-sitemap#34, this change will take priority over the sitemap plugin because it will disable itself. We're also using the same sitemaps table, so our migration won't try to create it
again using `if_not_exists: true`.
Due to default CSP web workers instantiated from CDN based assets are still
treated as "same-origin" meaning that we had no way of safely instansiating
a web worker from a theme.
This limits the theme system and adds the arbitrary restriction that WASM
based components can not be safely used.
To resolve this limitation all js assets in about.json are also cached on
local domain.
{
"name": "Header Icons",
"assets" : {
"worker" : "assets/worker.js"
}
}
This can then be referenced in JS via:
settings.theme_uploads_local.worker
local_js_assets are unconditionally served from the site directly and
bypass the entire CDN, using the pre-existing JavascriptCache
Previous to this change this code was completely dormant on sites which
used s3 based uploads, this reuses the very well tested and cached asset
system on s3 based sites.
Note, when creating local_js_assets it is highly recommended to keep the
assets lean and keep all the heavy working in CDN based assets. For example
wasm files can still live on the CDN but the lean worker that loads it can
live on local.
This change unlocks wasm in theme components, so wasm is now also allowed
in `theme_authorized_extensions`
* more usages of upload.content
* add a specific test for upload.content
* Adjust logic to ensure that after upgrades we still get a cached local js
on save
There are still some, but those are in actual code that's used outside core, so the change there would need to go through the deprecation cycle. That's a task for another day.
All users are members of the EVERYONE group, but this group is special and
is omitted from the group_users table. When checking permission we need to
make sure we also add a bypass.
This also fixes a very buggy test in post_alerter, it was confirming the
broken behavior due to fabricator flow.
When it defined the tag group the everyone group automatically had full access
then the additional permission fabricated just added one more group. After
fix was made to code the test started failing. Fabricators can be risky.
Via the API it is possible to create a user with an integer username. So
123 instead of "123". This causes the following 500 error:
```
NoMethodError (undefined method `unicode_normalize' for 1:Integer)
app/models/user.rb:276:in `normalize_username'
```
See: https://meta.discourse.org/t/222281
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
PostAnalyzer and CookedPostProcessor both replace URLs with oneboxes.
PostAnalyzer did not use the max_oneboxes_per_post site and setting and
CookedPostProcessor replaced at most max_oneboxes_per_post URLs ignoring
the oneboxes that were replaced already by PostAnalyzer.
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
Previously cached counting made redis calls in main thread and performed
the flush in main thread.
This could lead to pathological states in extreme heavy load.
This refactor reduces load and cleans up the interface
Previously we were publishing one messagebus message per user which was 'tracking' a topic. On large sites, this can easily be 1000+ messages. The important information in the message is common between all users, so we can manage with a single message on a shared channel, which will be much more efficient.
For user-specific values (notification_level and last_read_post_number), the JS app can infer values which are 'good enough'. Correct values will be loaded as soon as a topic-list containing the topic is visited.
aa1442fdc3 split theme stylesheets so that every component gets its own stylesheet. Therefore, there is now no need for parent themes to collate the settings/variables of its children during scss compilation.
Technically this is a breaking change for any themes which depend on the settings/variables of their child components. That was never a supported/recommended arrangement, so we don't expect this to cause issues.
If a theme is updated to introduce a new setting AND immediately make use of it in a stylesheet, then an error was being shown. This is because the stylesheet compilation was using the theme's cached settings, and the cache is only cleared **after** the theme has finished compiling.
This commit updates the SCSS compilation to use uncached values for settings. A similar fix was applied to other parts of theme compilation back in 2020: (a51b8d9c66)
The previous Discourse.cache usage was different to how other theme-related caching is handled, and also requires reaching out to redis every time. The common theme cache is held in memory (as a DistributedCache)
This commit makes sure that the email log's bounce_error_code
conforms to the SMTP error code RFC on save, so that
it is always in the format X.X.X or XXX without any
additional string details. Also included is a migration
to fix this issue for past records.
Similar site settings exist for likes and edits and the new ones work
in a similar way.
By default, users below TL2 have a limit of 20, the limit is increased
by 1.5 for TL2 users up to 30, by 2 for TL3 users up to 40 and by 3 for
TL4 users up to 60.
* FIX: Don't accept accents in slug if generation_method == 'ascii'
Fixes bug reported in:
- https://meta.discourse.org/t/404-when-trying-to-edit-category-with-accent-in-slug/214762
- https://meta.discourse.org/t/formatting-and-accents-in-urls/215734/5
Assuming `SiteSetting.slug_generation_method == 'ascii'.
If the user provides a slug containing non-ascii characters while
creating the category, the user will receive a 404 error just
after saving the category since the slug will be escaped anyway but
Category.find_by_slug_path won't escape the category slug
causing the Edit Page of the category to be inaccessible.
This commit checks the provided slug and raises an error if the
provided slugcontains non-ascii characters ensuring that the
provided value is consistent with the site settings.
It also changes Category.find_by_slug_path to always escape the slug,
since if present, it is escaped anyway in Category.ensure_slug to
prevent the 404 in the Edit Category Page in case the user already
have some category with a non-ascii slug.
* Removed trailing whitespace
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
This can happen if the topic to which a user is invited is in a private
category and the user was not invited to one of the groups that can see
that specific category.
This used to be a warning and this commit makes it an error.
Previously calls such as `Emoji["smile"]` would force a full dehydration of
objects from Redis.
This introduces a version safe site and global emoji cache so lookups are
cheap. It eliminates iterating through the list of emojis and pulling from
redis.
Distributed cache uses a normalized name as the key and stores an Array tuple
with version and Emoji. Successful hits always confirm version matches.
Interface to Emoji object remains unchanged.
We opted for 2 caches to improve reuse on multisites. misses though will be
stored in both caches. If there is a hit on the global cache we can avoid
looking up in site local cache and storing a miss there.
Previously we were calling `EXPIRE` every time we incremented a given key. Instead, we can call EXPIRE once when the key is first populated. A LUA script is used to make this as efficient as possible.
Consumers of this Concern use daily keys. Since we're now calling EXPIRE only at the beginning of the day, rather than throughout the day, the expire time has been increased from 3 to 4 days.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
- Update UI to improve contrast
- Make it clear that the message is only shown to administrators
- Add theme name and id to the console output
- Parse the error backtrace to identify the theme-id for post-decoration errors
- Improve console output to include the theme name / URL
- Add `?safe_mode=no_custom` to the admin panel link, so that it will work even if the theme is causing the site to break
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
Non-staff users are not allowed to see whisper so this change prevents
non-staff user from seeing a like count that does not make sense to
them. In the future, we might consider adding another like count column
for staff user.
Follow-up to 4492718864
* FIX: Tag watching for everyone tag groups
Tags in tag groups that have permissions set to everyone were not able
to be saved correctly. A user on their preferences page would mark the
tags that they wanted to save, but the watched_tags in the response
would be empty. This did not apply to admins, just regular users. Even
though the watched tags were being saved in the db, the user serializer
response was filtering them out. When a user refreshed their preferences
pages it would show zero watched tags.
This appears to be a regression introduced by:
0f598ca51e
The issue that needed to be fixed is that we don't track the "everyone"
group (which has an id of 0) in the group_users table. This is because
everyone has access to it, so why fill a row for every single user, that
would be a lot. The fix was to update the query to include tag groups
that had permissions set to the "everyone" group (group_id 0).
I also added another check to the existing spec for updating
watched tags for tags that aren't in a tag group so that it checks the
response body. I then added a new spec which updates watched tags for
tags in a tag group which has permissions set to everyone.
* Resolve failing tests
Improve SQL query syntax for including the "everyone" group with the id
of 0.
This commit also fixes a few failing tests that were introduced. It
turns out that the Fabrication of the Tag Group Permissions was faulty.
What happens when creating the tag groups without any permissions is
that it sets the permission to "everyone". If we then follow up with
fabricating a tag group permission on the tag group instead of having a
single permission it will have 2 (everyone + the group specified)! We
don't want this. To fix it I removed the fabrication of tag group
permissions and just set the permissions directly when creating the tag
group.
* Use response.parsed_body instead of JSON.parse
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
* FIX: Pass category and tag IDs to the emit webhook event job.
Like webhooks won't fire when they're scoped to specific categories or tags because we're not passing the data to the job that emits it.
* Update config/initializers/012-web_hook_events.rb
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
Co-authored-by: Dan Ungureanu <dan@ungureanu.me>
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
Some time ago, we made this fix to external authentication – https://github.com/discourse/discourse/pull/13706. We didn't address Discourse Connect (https://meta.discourse.org/t/discourseconnect-official-single-sign-on-for-discourse-sso/13045) at that moment, so I wanted to fix it for Discourse Connect as well.
Turned out though that Discourse Connect doesn't contain this problem and already handles staged users correctly. This PR adds tests that confirm it. Also, I've extracted two functions in Discourse Connect implementation along the way and decided to merge this refactoring too (the refactoring is supported with tests).
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
* REFACTOR: Improve support for consolidating notifications.
Before this commit, we didn't have a single way of consolidating notifications. For notifications like group summaries, we manually removed old ones before creating a new one. On the other hand, we used an after_create callback for likes and group membership requests, which caused unnecessary work, as we need to delete the record we created to replace it with a consolidated one.
We now have all the consolidation rules centralized in a single place: the consolidation planner class. Other parts of the app looking to create a consolidable notification can do so by calling Notification#consolidate_or_save!, instead of the default Notification#create! method.
Finally, we added two more rules: one for re-using existing group summaries and another for deleting duplicated dashboard problems PMs notifications when the user is tracking the moderator's inbox. Setting the threshold to one forces the planner to apply this rule every time.
I plan to add plugin support for adding custom rules in another PR to keep this one relatively small.
* DEV: Introduces a plugin API for consolidating notifications.
This commit removes the `Notification#filter_by_consolidation_data` scope since plugins could have to define their criteria. The Plan class now receives two blocks, one to query for an already consolidated notification, which we'll try to update, and another to query for existing ones to consolidate.
It also receives a consolidation window, which accepts an ActiveSupport::Duration object, and filter notifications created since that value.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When this setting is turned on, it will check that normalized emails
are unique. Normalized emails are emails without any dots or plus
aliases.
This setting can be used to block use of aliases of the same email
address.
The users all shared the same `User#last_seen_at` column so depending on
how the database returned the records, the user that we're interested in
may be excluded from the update query.
Follow-up to 8226ab1099
In b8c8909a9d, we introduced a regression
where users may have had their `UserStat.first_unread_pm_at` set
incorrectly. This commit introduces a migration to reset `UserStat.first_unread_pm_at` back to
`User#created_at`.
Follow-up to b8c8909a9d.
Similar to site settings, adds support for `refresh` option to theme settings.
```yaml
super_feature_enabled:
type: bool
default: false
refresh: true
```
We are pushing /notification-alert/#{user_id} and /notification/#{user_id}
messages to MessageBus from both PostAlerter and User#publish_notification_state.
This can cause memory issues on large sites with many users. This commit
stems the bleeding by only sending these alert messages if the user
in question has been seen in the last 30 days, which eliminates a large
chunk of users on some sites.
Previously, incorrect reply counts are displayed in the "top categories" section of the user summary page since we included the `moderator_action` and `small_action` post types.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previously, suppressed category topics are included in the digest emails if the user visited that topic before and the `TopicUser` record is created with any notification level except 'muted'.
* DEV: Sanitize HTML admin inputs
This PR adds on-save HTML sanitization for:
Client site settings
translation overrides
badges descriptions
user fields descriptions
I used Rails's SafeListSanitizer, which [accepts the following HTML tags and attributes](018cf54073/lib/rails/html/sanitizer.rb (L108))
* Make sure that the sanitization logic doesn't corrupt settings with special characters
This PR doesn't change any behavior, but just removes code that wasn't in use. This is a pretty dangerous place to change, since it gets called during user's registration. At the same time the refactoring is very straightforward, it's clear that this code wasn't doing any work (it still needs to be double-checked during review though). Also, the test coverage of UserNameSuggester is good.
Blake Erickson
Rafael dos Santos Silva
Alan Guo Xiang Tan
Bianca Nenciu
Osama Sayegh
Roman Rizzi
Martin Brennan
Gerhard Schlager
Krzysztof Kotlarek
Sam
Vinoth Kannan
Jarek Radosz
David Taylor
Joffrey JAFFEUX
chapoi
Arpit Jalan
Jan Cernik
Loïc Guitaut
Daniel Waterworth
Selase Krakani
Phil Pirozhkov
Leonardo Mosquera
Sérgio Saquetim
Joe
Andrei Prigorshnev
Isaac Janzen
Mark VanLandingham
Jeff Wong
Dan Ungureanu
Ayke Halder
Martin Brennan
Peter Zhu
Angus McLeod
Michelle Bueno Saquetim Vendrame
Natalie Tay