This commit fixes a regression introduced in 8979adc where under certain conditions the groups syncing logic in Discourse Connect would try to add users to groups they're already members of and cause errors when users try to sign in using Discourse Connect.
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Before this commit, there was no way for us to efficiently check an
array of topics for which a user can see. Therefore, this commit
introduces the `TopicGuardian#can_see_topic_ids` method which accepts an
array of `Topic#id`s and filters out the ids which the user is not
allowed to see. The `TopicGuardian#can_see_topic_ids` method is meant to
maintain feature parity with `TopicGuardian#can_see_topic?` at all
times so a consistency check has been added in our tests to ensure that
`TopicGuardian#can_see_topic_ids` returns the same result as
`TopicGuardian#can_see_topic?`. In the near future, the plan is for us
to switch to `TopicGuardian#can_see_topic_ids` completely but I'm not
doing that in this commit as we have to be careful with the performance
impact of such a change.
This method is currently not being used in the current commit but will
be relied on in a subsequent commit.
Discourse Connect can be used to manage group memberships of users by including a `add_groups`, `remove_groups` or `groups` attribute in the Discourse Connect payload. However, additions/deletions of users from groups aren't logged to the groups logs (available at `/g/<group>/manage/logs`) which can cause confusions to admins they try to figure out when/how users were added or removed from a group. This commit makes Discourse Connect add entries to the groups logs when it makes changes to users' group memberships.
Our theme system injects a magical `settings` object at the top of themes JS modules to allow theme authors to access the settings as configured by admins in the UI. Within this `settings` object, there are a couple of special objects `theme_uploads` and `theme_uploads_local` that contain URLs for all the assets/uploads that the theme has.
For test modules/files, the theme system also injects a `settings` object at the top of tests modules, but it's not the same object as the object that's injected in non-test files. The difference is that in tests we want the settings to have their default values as opposed to any custom values that may exist in the site's database. This ensures that test results are consistent no matter the site that runs them.
However, the `settings` object in tests files currently doesn't have the special objects `theme_uploads` and `theme_uploads_local` which means that if a theme includes an asset that's lazy-loaded, it's not possible to write tests for anything that depends on the lazy-loaded asset because the theme will not be able to load the asset during the tests since `theme_uploads_local` and `theme_uploads` don't exist. This PR adds these special objects inside the `settings` object for test files.
Internal topic: t/71825/52.
Theme javascript is now minified using Terser, just like our core/plugin JS bundles. This reduces the amount of data sent over the network.
This commit also introduces sourcemaps for theme JS. Browser developer tools will now be able show each source file separately when browsing, and also in backtraces.
For theme test JS, the sourcemap is inlined for simplicity. Network load is not a concern for tests.
Previously, compiling theme 'extra_js' was done with a number of steps. Each theme_field would be compiled into its own value_baked column, and then the JavascriptCache content would be built by concatenating all of those compiled values.
This commit streamlines things by removing the value_baked step. The raw value of all extra_js theme_fields are passed directly to the ThemeJavascriptCompiler, and then the result is stored in the JavascriptCache.
In itself, this commit should not cause any behavior change. It is designed to open the door to more advanced compilation features which have interdependencies between different source files (e.g. template colocation, sourcemaps).
This commit fixes an issue where we had a typo in the
UserAction.stream query which meant that action_code_path
was not loaded correctly. Once that was fixed, we were also
not actually using the action_code_path in the user-stream-item,
so that has been fixed here too.
The bug this caused was that, when the link for the action was
clicked within the user-stream-item, the user would be redirected
to a URL ending with `[missing%20%%7Bpath%7D%20value]` because
the I18n call did not have the path present.
* FIX: Reset related site settings on general category delete
If the new seeded General category is deleted we also need to delete the
corresponding site setting for it so that we don't try and reference it.
This fixes a bug in the category dropdown composer.
This change creates the `clear_related_site_settings` after destroy
hook that could also be used by other features in the future, like maybe
when we have a `default_category_id` site_setting.
Looks like if `nil` out a site setting it is set to `0`?
```
[9] pry(main)> SiteSetting.general_category_id = nil
SiteSetting Load (0.4ms) SELECT "site_settings".* FROM "site_settings" WHERE "site_settings"."name" = 'general_category_id' LIMIT 1
=> nil
[10] pry(main)> SiteSetting.general_category_id
=> 0
```
That is why the tests check if the value is `< 1` and not `nil`.
* Use -1 instead of nil because it is the default
This commit introduces a new framework for building user tutorials as
popups using the Tippy JS library. Currently, the new framework is used
to replace the old notification spotlight and tips and show a new one
related to the topic timeline.
All popups follow the same structure and have a title, a description and
two buttons for either dismissing just the current tip or all of them
at once.
The state of all seen popups is stored in a user option. Updating
skip_new_user_tips will automatically update the list of seen popups
accordingly.
The previous fix in e83d35d6 was incorrect, and the stub in the test was never actually hit. This commit moves the error handling to the right place and updates the specs to ensure the stub is always used.
This can no longer be used from the user interface and could be used to
generate useless topic invites notifications. This commit adds site
setting max_topic_invitations_per_minute to prevent invite spam.
Adds a new upload field for a second dark mode category logo.
This alternative will be used when the browser is in dark mode (similar to the global site setting for a dark logo).
These errors tend to indicate that the upload is missing on the remote store. This is bad, but we don't want it to block the dominant-color calculation process. This commit catches errors when there is an HTTP error, and fixes the `base_store.rb` implementation when `FileHelper.download` returns nil.
Previously, when categories were not muted by default, we were sending message about unmuted topics (topics which user explicitly set notification level to watching)
The same mechanism can be used to fix a bug. When the user was explicitly watching topic, but category was muted, then the user was not informed about new reply.
This commit makes pending reviewables show up in the main tab (a.k.a. "all notifications" tab). Pending reviewables along with unread notifications are always shown first and they're sorted based on their creation date (most recent comes first).
The dismiss button currently only shows up if there are unread notifications and it doesn't dismiss pending reviewables. We may follow up with another change soon that allows makes the dismiss button work with reviewables and remove them from the list without taking any action on them.
Follow-up to 079450c9e4.
This commit adds non-archived group messages and `group_message_summary` notifications in the messages tab in the user menu. With this change, the messages tab in the user menu now includes 3 types of items:
1. Unread `private_message` notifications (notifications when you receive a reply in a PM)
2. Unread and read `group_message_summary` notifications (notifications when there's a new message in a group inbox that you track)
3. Non-archived personal and group messages
Unread `private_message` notifications are always shown first, followed by unread `group_message_summary` notifications, and then everything else (messages and read `group_message_summary` notifications) sorted by recency (most recent first).
Internal topic: t/72976.
Currently, the reviewables tab in the user menu shows pending reviewables at the top of the menu and fills the remaining space in the menu with old/handled reviewables. This PR makes the revieables tab show only pending reviewables and hides the tab altogether from the menu if there are no pending reviewables. We're going to follow-up with another change soon that will show pending reviewables in the main tab of the user menu.
Internal topic: t/73220.
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
In the past, CategoryFeaturedTopic.feature_topics raised an exception
sometimes because it tried to create multiple CategoryFeaturedTopic
records for the same topic.
This code should not raise any exceptions as long as the list of new
topic IDs is unique because all previous records are deleted first,
then recreated and everything happens inside a transaction. The previous
rescue block was dead code anyway because it tried to catch
PG::UniqueViolation instead of ActiveRecord::RecordNotUnique. This
commit includes a fix to ensure that the topic IDs are unique.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
See https://meta.discourse.org/t/discourse-email-messages-are-incorrectly-threaded/233499
for thorough reasoning.
This commit changes how we generate Message-IDs and do email
threading for emails sent from Discourse. The main changes are
as follows:
* Introduce an outbound_message_id column on Post that
is either a) filled with a Discourse-generated Message-ID
the first time that post is used for an outbound email
or b) filled with an original Message-ID from an external
mail client or service if the post was created from an
incoming email.
* Change Discourse-generated Message-IDs to be more consistent
and static, in the format `discourse/post/:post_id@:host`
* Do not send References or In-Reply-To headers for emails sent
for the OP of topics.
* Make sure that In-Reply-To is filled with either a) the OP's
Message-ID if the post is not a direct reply or b) the parent
post's Message-ID
* Make sure that In-Reply-To has all referenced post's Message-IDs
* Make sure that References is filled with a chain of Message-IDs
from the OP down to the parent post of the new post.
We also are keeping X-Discourse-Post-Id and X-Discourse-Topic-Id,
headers that we previously removed, for easier visual debugging
of outbound emails.
Finally, we backfill the `outbound_message_id` for posts that have
a linked `IncomingEmail` record, using the `message_id` of that record.
We do not need to do that for posts that don't have an incoming email
since they are backfilled at runtime if `outbound_message_id` is missing.
The `add_column` `limit` parameter has no effect on a postgres `text` column. Instead we can perform the check in ActiveRecord.
We never expect this condition to be hit - users cannot control this value. It's just a safety net.
Adds limits to location and website fields at model and DB level
to match the bio_raw field limits. A limit cannot be added at the
DB level for bio_raw because it is a postgres text field.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
We previously had a system which would generate a 10x10px preview of images and add their URLs in a data-small-upload attribute. The client would then use that as the background-image of the `<img>` element. This works reasonably well on fast connections, but on slower connections it can take a few seconds for the placeholders to appear. The act of loading the placeholders can also break or delay the loading of the 'real' images.
This commit replaces the placeholder logic with a new approach. Instead of a 10x10px preview, we use imagemagick to calculate the average color of an image and store it in the database. The hex color value then added as a `data-dominant-color` attribute on the `<img>` element, and the client can use this as a `background-color` on the element while the real image is loading. That means no extra HTTP request is required, and so the placeholder color can appear instantly.
Dominant color will be calculated:
1. When a new upload is created
2. During a post rebake, if the dominant color is missing from an upload, it will be calculated and stored
3. Every 15 minutes, 25 old upload records are fetched and their dominant color calculated and stored. (part of the existing PeriodicalUpdates job)
Existing posts will continue to use the old 10x10px placeholder system until they are next rebaked
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
Previously we were relying on a highly-customized version of the unmaintained Barber gem for theme template compilation. This commit switches us to use our own DiscourseJsProcessor, which makes use of more modern patterns and will be easier to maintain going forward.
In summary:
- Refactors DiscourseJsProcessor to move multiline JS heredocs into a companion `discourse-js-processor.js` file
- Use MiniRacer's `.call` method to avoid manually escaping JS strings
- Move Theme template AST transformers into DiscourseJsProcessor, and formalise interface for extending RawHandlebars AST transformations
- Update Ember template compilation to use a babel-based approach, just like Ember CLI. This gives each template its own ES6 module rather than directly assigning `Ember.TEMPLATES` values
- Improve testing of template compilation (and move some tests from `theme_javascript_compiler_spec.rb` to `discourse_js_processor_spec.rb`
It used to return the next URL anyway which lead to an additional
request. On the frontend, if the result set was empty, it kept retrying
until at least one result was returned. This bug is fixed in this commit
too.
* FIX: hide welcome topic banner as soon as the welcome topic is edited
This commit adds a message bus listener on client to hide the welcome
topic banner as soon as the welcome topic is edited.
* update test
* only subscribe when show_welcome_topic_banner is true
* Do not lookup for messageBus service if it's not required
* Remove unneeded code
* Cache result for Site.show_welcome_topic_banner
* Update tests per latest changes
* Changes per PR review
Each new user menu notifications should have their own count. Therefore, we need to include all types to serializer and not only `grouped_unread_high_priority_notifications`
Additional PR will be created for chat and assign plugin, as they will have to switch to `grouped_unread_notifications` as well.
The source-of-truth for our ember version is now the installed node_module. The `ember_source` gem carries an old version of Ember and so the constant is no longer useful. We'll be dropping the gem soon.
This commit makes a number of improvements to the DiscourseJsProcessor:
1. Remove dependence on the out-of-date Ember template compiler from the ember-rails gem; switch to modern template compiler
2. Refactor to make use of a proper module system with `define`/`require`
3. Introduce `babel-plugin-ember-template-compilation` to enable inline hbs compilation
The `mini-loader` is upgraded to support relative lookup and `require.has`, so that these new JS packages work correctly.
If a topic is converted to a private message, all posters were invited
to the new private message. This included users who only whispered or
posted small actions.
Topic allowed user records were created for small actions, which lead to
the system user being invited in many private topics when the user
removed themselves or if a group was invited but some members already
had access.
This commits skips creating topic allowed user. They are already skipped
for the whisper posts.
If a user was granted a trust level, joined a group that granted a trust
level and left the group, the trust level was reset. This commit tries
to restore the last known trust level before joining the group by
looking into staff logs.
This commit also migrates old :change_trust_level user history records
to use previous_value and new_value fields.
When preloading topic_list data we were giving it a 'preload key' which was loosely based on the parameters of the list. However, it did not include all parameters, and mismatches between client/server-side logic would cause the preloaded data to be ignored.
This commit simplifies things by using a single key for all topic_list preloading. This works on the assumption that "The first topic_list the JS app will load is the one which was preloaded". That assumption also existed to some extent in the old design, so we don't expect any regressions here.
Default sidebar tags for not authenticated users can be defined in admin panel. Otherwise, top 5 categories and tags are taken.
Optionally, if categories are set up in permanent order, then the first 5 categories are taken.
```
1) CurrentUserSerializer#sidebar_category_ids includes visible default sidebar categories
Failure/Error: expect(json[:sidebar_category_ids]).to eq([category.id, category_2.id])
expected: [378, 379]
got: [379, 378]
```
Note that in the Ruby doc it says "The order is preserved from the original array". In this case, we want to preserve the order of the site setting.
Handles edge-case when a user is an admin and has an associated reviewable. Hitting this exception should be rare since we clear the reviewable when
granting staff to the user.
A public key must be added to GitHub when installing private themes.
When the process happens asynchronously (for example if the admin does
not have admin permissions to the GitHub repository), installing
private themes becomes very difficult.
In this case, the Discourse admin can partially install the theme by
letting Discourse save the private key, create a placeholder theme and
give the admin a public key to be used as a deploy key. After the key
is installed, the admin can finish theme installation by pressing a
button on the theme page.
Hard deleting topics that contained soft deleted posts or small actions
used to create orphan posts because only the first post was hard
deleted. This commit adds an error message if there are still posts left
in the topic that must be hard deleted first or hard deletes all small
actions too immediately (there is no other way of hard deleting a small
action because there is no wrench menu).
Some of the changes in this PR are extracted from https://github.com/discourse/discourse/pull/17379.
Similar to the bookmarks tab in the new user menu, the messages tab also displays a mix of notifications and messages. When there are unread message notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with a list of the user's messages. The bubble/badge count on the messages tab indicates how many unread message notifications there are.
This is a much better description of its function. It performs idempotent normalization of a URL. If consumers truly need to `encode` a URL (including double-encoding of existing encoded entities), they can use the existing `.encode` method.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Currently we can’t add a case-sensitive watched word if another one
exists with a different case. For example, the existing watched word
`Meta` has been created and is case-sensitive. Now an admin tries to add
`metA` while marking it as case-sensitive too, this won’t work and the
word won’t be added.
This patch changes this behavior by allowing to add same words that have
different cases, so the example above will now work as expected.
We still check for uniqueness but case-sensitivy is now taken
into account. It means that if the watched word `meta` already exists
and is not case-sensitive then it will not be possible to add `Meta`
(case-sensitive or not) as `meta` already matches every possible
variations of this word.
Follow-up to ce9eec8606.
I did a last-minute refactoring before merging the commit above where I extracted the Message Bus publish call into a new method, but forgot to delete the publish call after adding a call to the new method.
The content from the remote site and the footer get cached for 10 minutes, so Discourse should use the default locale instead of the user locale for the footer. Otherwise Discourse might cache the message in a different language.
* FEATURE: Add case-sensitivity flag to watched_words
Currently, all watched words are matched case-insensitively. This flag
allows a watched word to be flagged for case-sensitive matching.
To allow allow for backwards compatibility the flag is set to false by
default.
* FEATURE: Support case-sensitive creation of Watched Words via API
Extend admin creation and upload of Watched Words to support case
sensitive flag. This lays the ground work for supporting
case-insensitive matching of Watched Words.
Support for an extra column has also been introduced for the Watched
Words upload CSV file. The new column structure is as follows:
word,replacement,case_sentive
* FEATURE: Enable case-sensitive matching of Watched Words
WordWatcher's word_matcher_regexp now returns a list of regular
expressions instead of one case-insensitive regular expression.
With the ability to flag a Watched Word as case-sensitive, an action
can have words of both sensitivities.This makes the use of the global
Regexp::IGNORECASE flag added to all words problematic.
To get around platform limitations around the use of subexpression level
switches/flags, a list of regular expressions is returned instead, one for each
case sensitivity.
Word matching has also been updated to use this list of regular expressions
instead of one.
* FEATURE: Use case-sensitive regular expressions for Watched Words
Update Watched Words regular expressions matching and processing to handle
the extra metadata which comes along with the introduction of
case-sensitive Watched Words.
This allows case-sensitive Watched Words to matched as such.
* DEV: Simplify type casting of case-sensitive flag from uploads
Use builtin semantics instead of a custom method for converting
string case flags in uploaded Watched Words to boolean.
* UX: Add case-sensitivity details to Admin Watched Words UI
Update Watched Word form to include a toggle for case-sensitivity.
This also adds support for, case-sensitive testing and matching of Watched Word
in the admin UI.
* DEV: Code improvements from review feedback
- Extract watched word regex creation out to a utility function
- Make JS array presence check more explicit and readable
* DEV: Extract Watched Word regex creation to utility function
Clean-up work from review feedback. Reduce code duplication.
* DEV: Rename word_matcher_regexp to word_matcher_regexp_list
Since a list is returned now instead of a single regular expression,
change `word_matcher_regexp` to `word_matcher_regexp_list` to better communicate
this change.
* DEV: Incorporate WordWatcher updates from upstream
Resolve conflicts and ensure apply_to_text does not remove non-word characters in matches
that aren't at the beginning of the line.
Relative URLs will work just fine for Web Workers, which were the original reason for introducing the `theme_uploads_local` feature
Making them relative will mean that `loadScript()` automatically uses the CDN (when enabled), which is doubly important because our CSP doesn't allow loading theme-javascripts from the host domain when the CDN is enabled.
When viewing a topic, we execute two queries to fetch the topic's
public topic timer and slow mode timer. The former query happens to be
able to use a unique index but the latter has to do a seq scan which is
slow. The query itself is not expensive but since viewing a topic is a
hot path, the little cuts add up overtime and the query itself
contributes significantly to the load of the database.
This commit removes the ability to enable/disable the Sidebar on a per
user basis and introduces a site wide setting. For testing purposes, sidebar can be enabled/disabled via the `enable_sidebar=1` or `enable_sidebar=0` query param.
The previous method for reused the PrettyText logic which applied the
watched word logic, but had the unwanted effect of cooking the text too.
This meant that regular text values were converted to HTML.
Follow up to commit 5a4c35f627.
Our theme system is very complex and it can take a while to figure out how to invalidate the various types of caches that are used throughout the theme system. So, having a single helper method that invalidates everything can be useful in emergency situations where there is no time to read through the code and figure out how to clear the various caches.
Internal ticket: t64732.
The invites should be redeemed during the signup process. This was a
problem because when user tried to redeem an admin invite it tried to
authenticate the user using information from the session that was not
available.
This commit introduces a new plugin API to register
a group of stats that will be included in about.json
and also conditionally in the site about UI at /about.
The usage is like this:
```ruby
register_about_stat_group("chat_messages", show_in_ui: true) do
{
last_day: 1,
"7_days" => 10,
"30_days" => 100,
count: 1000,
previous_30_days: 120
}
end
```
In reality the stats will be generated any way the implementer
chooses within the plugin. The `last_day`, `7_days`, `30_days,` and `count`
keys must be present but apart from that additional stats may be added.
Only those core 4 stat keys will be shown in the UI, but everything will be shown
in about.json.
The stat group name is used to prefix the stats in about.json like so:
```json
"chat_messages_last_day": 2322,
"chat_messages_7_days": 2322,
"chat_messages_30_days": 2322,
"chat_messages_count": 2322,
```
The `show_in_ui` option (default false) is used to determine whether the
group of stats is shown on the site About page in the Site Statistics
table. Some stats may be needed purely for reporting purposes and thus
do not need to be shown in the UI to admins/users. An extension to the Site
serializer, `displayed_about_plugin_stat_groups`, has been added so this
can be inspected on the client-side.
* FIX: properly validate multiselect user fields on user creation
* Add test cases
* FIX: don't check multiselect user fields for watched words
* Clarifiy/simplify tests
* Roll back apply_watched_words changes
Since this method no longer needs to deal with arrays for now. If/when
we add new user fields which uses them, we can deal with it then.
All `DistributedCache` instances in Discourse are automatically keyed on the `Discourse.git_version`. Normally the theme compiler version is updated via a commit, and everything is fine. However, in some situations, it's possible for the BASE_COMPILER_VERSION to change without a change to the git_version (e.g. when applying patches directly to the codebase).
This commit adds the `BASE_COMPILER_VERSION` to the DistributedCache key to ensure that content from different compiler versions does not leak into other processes.
The `unread_not_too_old` attribute is a little odd because there should never be a case where
the user's first_unread_at column is less than the `Topic#updated_at`
column of an unread topic. The `unread_not_too_old` attribute is causing
a bug where topic states synced into `TopicTrackingState` do not appear
as unread because the attribute does not exsist on a normal `Topic`
object and hence never set.
It makes more sense to use user_ids for the UserCommScreener
introduced in fa5f3e228c since
in most cases the ID will be available, not the username. This
was discovered while starting work on a plugin that will
use this. In the cases where only usernames are available
the extra query is negligble.
The idea behind this refactor is to centralise all of the user ignoring / muting / disallow PM checks in a single place, so they can be used consistently in core as well as for plugins like chat, while improving the main bulk of the checks to run in a single fast non-AR query.
Also fixed up the invite error when someone is muting/ignoring the user that is trying to invite them to the topic.
Currently we only apply watched words of the `Block` type to custom user
fields and user profile fields.
This patch enables all rules to be applied such as `Censor` or
`Replace`.
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
Updates automatically data on the stats section of the topic.
It will update automatically the following information: likes, replies and last reply (timestamp and user)
We have a `cleanup!` class method on bookmarks that deletes
bookmarks X days after their related record (post/topic) are
deleted. This commit changes this method to use the
registered_bookmarkables for this instead, and each bookmarkable
type can delete related bookmarks in their own way.
In certain situations, a logged in user can redeem an invite with an email that
either doesn't match the invite's email or does not adhere to the email domain
restriction of an invite link. The impact of this flaw is aggrevated
when the invite has been configured to add the user that accepts the
invite into restricted groups.
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
This is pre-request work to introduce a splash screen while site assets load.
The only change this commit introduces is that it ensures we add the defer attribute to core/plugin/theme .JS files. This will allow us to insert markup before the browser starts evaluating those scripts later on. It has no visual or functional impact on core.
This will not have any impact on how themes and plugins work. The only exception is themes loading external scripts in the </head> theme field directly via script tags. Everything will work the same but those would need to add the defer attribute if they want to keep the benefits introduced in this PR.
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
When sending emails with delivery_method_options -> return_response
set to true, the SMTP sending code inside Mail will return the SMTP
response when calling deliver! for mail within the app. This commit
ensures that Email::Sender captures this response if it is returned
and stores it against the EmailLog created for the sent email.
A follow up PR will make this visible within the admin email UI.
The query is very inefficient without any constraints on large sites and
the average of all time to first response since the beginning of time is
not useful as well.
We do not zero-pad our base62 short URLs, so there is no guarantee that the length is 27. Instead, let's greedily match all consecutive base62 characters and look for a matching upload.
This reverts bd32656157 and 36f5d5eada.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This reverts one of the changes introduced just now in:
27d7b0c6de
I don't think we need this `activated_not_suspended_not_staged` scope
because we can just compose it ourselves via method chaining like
`User.activated.not_suspended.not_staged`.
This commit introduces a new site setting: `block_hotlinked_media`. When enabled, all attempts to hotlink media (images, videos, and audio) will fail, and be replaced with a linked placeholder. Exceptions to the rule can be added via `block_hotlinked_media_exceptions`.
`download_remote_image_to_local` can be used alongside this feature. In that case, hotlinked images will be blocked immediately when the post is created, but will then be replaced with the downloaded version a few seconds later.
This implementation is purely server-side, and does not impact the composer preview.
Technically, there are two stages to this feature:
1. `PrettyText.sanitize_hotlinked_media` is called during `PrettyText.cook`, and whenever new images are introduced by Onebox. It will iterate over all src/srcset attributes in the post HTML and check if they're allowed. If not, the attributes will be removed and replaced with a `data-blocked-hotlinked-src(set)` attribute
2. In the `CookedPostProcessor`, we iterate over all `data-blocked-hotlinked-src(set)` attributes and check whether we have a downloaded version of the media. If yes, we update the src to use the downloaded version. If not, the entire media element is replaced with a placeholder. The placeholder is labelled 'external media', and is a link to the offsite media.
* FIX: Email Send post has already been taken error
Adding a failing test first before coming up with a good solution.
Related: 357011eb3b
The above commit changed
```
PostReplyKey.find_or_create_by_safe!
```
to
```
PostReplyKey.create_or_find_by!
```
But I don't think it is working as a 1-1 replacement because of the
`Validation failed: Post has already been taken` error we are receiving
with this change. Also we need to make sure we don't re-introduce any
concurrency issues.
Reported: https://meta.discourse.org/t/224706/13
* Remove rails unique constraint and rely on db index
I believe this is what is causing `create_or_find_by!` to fail. Because
we have a unique constraint in the db I think we can remove this rails
unique constraint?
* clean up spec wording
This commit resolves a bug where users are not auto approved based on
`SiteSetting.auto_approve_email_domains` when
`SiteSetting.must_approve_users` has been enabled.
When a site has `SiteSetting.invite_only` enabled, we create a
`ReviewableUser`record when activating a user if the user is not
approved. Therefore, we need to approve the user when redeeming an
invite.
There are some uncertainties surrounding why a `ReviewableRecord` is
created for a user in an invites only site but this commit does not seek
to address that.
Follow-up to 7c4e2d33fa
This security fix affects sites which have `SiteSetting.must_approve_users`
enabled. There are intentional and unintentional cases where invited
users can be auto approved and are deemed to have skipped the staff approval process.
Instead of trying to reason about when auto-approval should happen, we have decided that
enabling the `must_approve_users` setting going forward will just mean that all new users
must be explicitly approved by a staff user in the review queue. The only case where users are auto
approved is when the `auto_approve_email_domains` site setting is used.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Previously this mapping of **cooked** images was only being run for oneboxes. Now it runs for all images, so we can transform hotlinked images without needing to immediately update `raw`
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
David Taylor
Osama Sayegh
Natalie Tay
Alan Guo Xiang Tan
Blake Erickson
Joffrey JAFFEUX
Krzysztof Kotlarek
Martin Brennan
Bianca Nenciu
Arpit Jalan
Jan Cernik
Roman Rizzi
Loïc Guitaut
Gerhard Schlager
Isaac Janzen
Andrei Prigorshnev
Selase Krakani
Vinoth Kannan
Jarek Radosz
Jean
Leonardo Mosquera
Jordan Vidrine
Sam
Sérgio Saquetim
Rafael dos Santos Silva
Joe