For e-mails, secure uploads redacts all secure images, and later uses the access control post to re-attached allowed ones. We pass the ID of this post through the X-Discourse-Post-Id header. As the name suggests, this assumes there's only ever one access control post. This is not true for activity summary e-mails, as they summarize across posts.
This adds a new header, X-Discourse-Post-Ids, which is used the same way as the old header, but also works for the case where an e-mail is associated with multiple posts.
Why this change?
Prior to this change, the ordering of the tags shown in the email subject
was non-deterministic as there was no specific order specified. This
problem was exposed by a flaky test which we had.
What is the fix?
This commit orders the tags used in the email subject first by the
`Tag#public_topic_count` column in descending order and then the `Tag#name`
column in ascending order.
* FEATURE: Implement max_tags_per_email_subject
* made it so only max_tags_per_email_subject is responsible for tags in emails when the feature is enabled
* added locales for implemented siteSettings
* reworded locale for enable_max_tags_per_email_subject
* added min value for max_tags_per_email_subject
* Implemented suggested changes to spec description
This commit fixes an issue where the Likes Received notification
count in the user digest email was not affected by the
since/last_seen date for the user, which meant that no matter
how long it had been since the user visited the count was
always constant.
Now instead for the Likes Received count, we only count the
unread notifications of that type since the user was last
seen.
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
This commit does a couple of things:
1. Changes the limit of tags to include a subject for a
notification email to the `max_tags_per_topic` setting
instead of the arbitrary 3 limit
2. Adds both an X-Discourse-Tags and X-Discourse-Category
custom header to outbound emails containing the tags
and category from the subject, so people on mail clients
that allow advanced filtering (i.e. not Gmail) can filter
mail by tags and category, which is useful for mailing
list mode users
c.f. https://meta.discourse.org/t/headers-for-email-notifications-so-that-gmail-users-can-filter-on-tags/249982/17
* Adds a hidden site setting: `max_participant_names`
* Replaces duplicate code in `GroupSmtpMailer` and `UserNotifications`
* Groups are sorted by the number of users (decreasing)
* Replaces the query to count users of each group with `Group#user_count`)
* Users are sorted by their last reply in the topic (most recent first)
* Adds lots of tests
This commit removes the recipient's username from the
respond to / participants list that is shown at the bottom
of user notification emails. For example if the recipient's
username was jsmith, and there were participants ljones and
bmiller, we currently show this:
> "reply to this email to respond to jsmith, ljones, bmiller"
or
> "Participants: jsmith, ljones, bmiller"
However this is a bit redundant, as you are not replying to
yourself here if you are the recipient user. So we omit the
recipient user's username from this list, which is only used
in the text of the email and not elsewhere.
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
This PR makes several changes to the group SMTP email contents to make it look more like a support inbox message.
* Remove the context posts, they only add clutter to the email and replies
* Display email addresses of staged users instead of odd generated usernames
* Add a "please reply above this line" message to sent emails
This PR backtracks a fair bit on this one https://github.com/discourse/discourse/pull/13220/files.
Instead of sending the group SMTP email for each user via `UserNotifications`, we are changing to send only one email with the existing `Jobs::GroupSmtpEmail` job and `GroupSmtpMailer`. We are changing this job and mailer along with `PostAlerter` to make the first topic allowed user the `to_address` for the email and any other `topic_allowed_users` to be the CC address on the email. This is to cut down on emails sent via SMTP, which is subject to daily limits from providers such as Gmail. We log these details in the `EmailLog` table now.
In addition to this, we have changed `PostAlerter` to no longer rely on incoming email email addresses for sending the `GroupSmtpEmail` job. This was unreliable as a user's email could have changed in the meantime. Also it was a little overcomplicated to use the incoming email records -- it is far simpler to reason about to just use topic allowed users.
This also adds a fix to include cc_addresses in the EmailLog.addressed_to_user scope.
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
We were sending 2 emails for user silencing if a message was provided in the UI. Also always send email for user silence and user suspend with reason regardless of whether message provided.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
This PR introduces a few important changes to secure media redaction in emails. First of all, two new site settings have been introduced:
* `secure_media_allow_embed_images_in_emails`: If enabled we will embed secure images in emails instead of redacting them.
* `secure_media_max_email_embed_image_size_kb`: The cap to the size of the secure image we will embed, defaulting to 1mb, so the email does not become too big. Max is 10mb. Works in tandem with `email_total_attachment_size_limit_kb`.
`Email::Sender` will now attach images to the email based on these settings. The sender will also call `inline_secure_images` in `Email::Styles` after secure media is redacted and attachments are added to replace redaction messages with attached images. I went with attachment and `cid` URLs because base64 image support is _still_ flaky in email clients.
All redaction of secure media is now handled in `Email::Styles` and calls out to `PrettyText.strip_secure_media` to do the actual stripping and replacing with placeholders. `app/mailers/group_smtp_mailer.rb` and `app/mailers/user_notifications.rb` no longer do any stripping because they are earlier in the pipeline than `Email::Styles`.
Finally the redaction notice has been restyled and includes a link to the media that the user can click, which will show it to them if they have the necessary permissions.
In the near future, we will be swtiching to PG headlines to generate the
search blurb. As such, we need to replace audio and video links in the
raw data used for headline generation. This also means that we avoid
replacing links each time we need to generate the blurb.
If `default email digest frequency` was set to "Never", users would get
a `digest_after_minutes` set to `nil` which triggered this error
in the logs if/when the site eventually changed that setting and
enabled digests:
```
NoMethodError (undefined method `>=' for nil:NilClass)
/var/www/discourse/app/mailers/user_notifications.rb:227:in `digest'
```
We now add together unread notifications (which are low-priority only) and unread high priority notifications (PMs and bookmark reminder notifications), and removed the separate "X unread high priority notifications" count in the user digest email.
Introduce the concept of "high priority notifications" which include PM and bookmark reminder notifications. Now bookmark reminder notifications act in the same way as PM notifications (float to top of recent list, show in the green bubble) and most instances of unread_private_messages in the UI have been replaced with unread_high_priority_notifications.
The user email digest is changed to just have a section about unread high priority notifications, the unread PM section has been removed.
A high_priority boolean column has been added to the Notification table and relevant indices added to account for it.
unread_private_messages has been kept on the User model purely for backwards compat, but now just returns unread_high_priority_notifications count so this may cause some inconsistencies in the UI.
The following methods have long been deprecated in ruby due to flaws in their implementation per http://blade.nagaokaut.ac.jp/cgi-bin/vframe.rb/ruby/ruby-core/29293?29179-31097:
URI.escape
URI.unescape
URI.encode
URI.unencode
escape/encode are just aliases for one another. This PR uses the Addressable gem to replace these methods with its own encode, unencode, and encode_component methods where appropriate.
I have put all references to Addressable::URI here into the UrlHelper to keep them corralled in one place to make changes to this implementation easier.
Addressable is now also an explicit gem dependency.
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
The query to count how many new users there are since a given date
is expensive. It's the least personalized stat and the one we fallback
to last when no better number can be found for the target user.
Give up accuracy so we can aggressively cache the user counts
that appear in this email.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Our instance used for template rendering needs a lock to ensure there is
no race condition where rendering happens on 2 threads at the same time.
This can lead to local poisoning which can cause unexpected results in
emails
Previous to this fix we were leaking methods on the internal action view
template class per render.
This caused email generation to be very low and a steady memory leak in the
application in sidekiq when sending out emails
The behavior change is new to Rails 6 so this fix does not need to be
backported into stable.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Loïc Guitaut
Régis Hanol
Natalie Tay
marstall
Ted Johansson
Penar Musaraj
Alan Guo Xiang Tan
Juan David Martínez Cubillos
Martin Brennan
David Taylor
Daniel Waterworth
Roman Rizzi
Andrei Prigorshnev
Gerhard Schlager
Martin Brennan
Jarek Radosz
Dan Ungureanu
Krzysztof Kotlarek
Joffrey JAFFEUX
Neil Lalonde
Arpit Jalan
Sam Saffron
