Previously, with the default `editing_grace_period`, hotlinked images were pulled 5 minutes after a post is created. This delay was added to reduce the chance of automated edits clashing with user edits.
This commit refactors things so that we can pull hotlinked images immediately. URLs are immediately updated in the post's `cooked` HTML. The post's raw markdown is updated later, after the `editing_grace_period`.
This involves a number of behind-the-scenes changes including:
- Schedule Jobs::PullHotlinkedImages immediately after Jobs::ProcessPost. Move scheduling to after the `update_column` call to avoid race conditions
- Move raw changes into a separate job, which is delayed until after the ninja-edit window
- Move disable_if_low_on_disk_space logic into the `pull_hotlinked_images` job
- Move raw-parsing/replacing logic into `InlineUpload` so it can be easily be shared between `UpdateHotlinkedRaw` and `PullUserProfileHotlinkedImages`
Meta topic: https://meta.discourse.org/t/prevent-to-linkify-when-there-is-a-redirect/226964/2?u=osama.
This commit adds a new site setting `block_onebox_on_redirect` (default off) for blocking oneboxes (full and inline) of URLs that redirect. Note that an initial http → https redirect is still allowed if the redirect location is identical to the source (minus the scheme of course). For example, if a user includes a link to `http://example.com/page` and the link resolves to `https://example.com/page`, then the link will onebox (assuming it can be oneboxed) even if the setting is enabled. The reason for this is a user may type out a URL (i.e. the URL is short and memorizable) with http and since a lot of sites support TLS with http traffic automatically redirected to https, so we should still allow the URL to onebox.
Incorporates learnings from /t/64227:
* Changes the code to set access control posts in the rake
task to be an efficient UPDATE SQL query.
The original version was timing out with 312017 post uploads,
the new query took ~3s to run.
* Changes the code to mark uploads as secure/not secure in
the rake task to be an efficient UPDATE SQL query rather than
using UploadSecurity. This took a very long time previously,
and now takes only a few seconds.
* Spread out ACL syncing for uploads into jobs with batches of
100 uploads at a time, so they can be parallelized instead
of having to wait ~1.25 seconds for each ACL to be changed
in S3 serially.
One issue that still remains is post rebaking. Doing this serially
is painfully slow. We have a way to do this in sidekiq via PeriodicalUpdates
but this is limited by max_old_rebakes_per_15_minutes. It would
be better to fan this rebaking out into jobs like we did for the
ACL sync, but that should be done in another PR.
This commit migrates all bookmarks to be polymorphic (using the
bookmarkable_id and bookmarkable_type) columns. It also deletes
all the old code guarded behind the use_polymorphic_bookmarks setting
and changes that setting to true for all sites and by default for
the sake of plugins.
No data is deleted in the migrations, the old post_id and for_topic
columns for bookmarks will be dropped later on.
Previously we were only applying the restriction to `a[href]` and `img[src]`. This commit ensures we apply the same logic to all allowlisted media src attributes.
This makes it easier to find PMs involving a particular user, for
example by searching for `in:messages thisUser` (previously, that query
would only return results in posts where `thisUser` was in the post body).
The title had to be added both on the 404 page generated by the server
side, displayed when the user reaches a bad page directly and the 404
page rendered by Ember when a user reaches a missing topic while
navigating the forum.
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
The cache was causing state to leak between tests since the `WatchedWord` record in the DB would have been rolled back but `WordWatcher` still had the word in the cache.
The logic in 06893380 only works for `.js` files. It breaks down for `.br.js` and `.gz.js` files. This commit makes things more robust by extracting only the base_url from the service-worker JS, and taking the map filename from the original `sourceMappingURL` comment.
7a284164 previously switched the UserDestroyer to use find_each when iterating over UserHistory records. Unfortunately, since this logic is wrapped in a transaction, this didn't actually solve the memory usage problem. ActiveRecord maintains references to all modified models within a transaction.
This commit updates the logic to use a single SQL query, rather than updating models one-by-one
22a7905f restructured how we load Ember CLI assets in production. Unfortunately, it also broke sourcemaps for those assets. This commit fixes that regression via a couple of changes:
- It adds the necessary `.map` paths to `config.assets.precompile`
- It swaps Sprockets' default `SourcemappingUrlProcessor` with an extended version which maintains relative URLs of maps
`script_asset_path('.../blah.js.map')` was appending `.js`, which would result in a filename like `.js.map.js`. It would also lose the `/assets` prefix, since the map files are not included in the sprockets manifest.
This commit updates the sourceMappingURL rewriting logic to calculate the service-worker's own JS url, and then append `.map`.
When we build and send emails using MessageBuilder and Email::Sender
we add custom headers defined in SiteSetting.email_custom_headers.
However this was causing errors in cases where the custom headers
defined a header that we already specify in outbound emails (e.g.
the Precedence: list header for topic/post emails).
This commit makes it so we always use the header value defined in Discourse
core if there is a duplicate, discarding the custom header value
from the site setting.
cf. https://meta.discourse.org/t/email-notifications-fail-if-duplicate-headers-exist/222960/14
We have a .ics endpoint for user bookmarks, this
commit makes it so polymorphic bookmarks work on
that endpoint, using the serializer associated with
the RegisteredBookmarkable.
Currently the only way to allow tagging on pms is to use the `allow_staff_to_tag_pms` site setting. We are removing that site setting and replacing it with `pm_tags_allowed_for_groups` which will allow for non staff tagging. It will be group based permissions instead of requiring the user to be staff.
If the existing value of `allow_staff_to_tag_pms` is `true` then we include the `staff` groups as a default for `pm_tags_allowed_for_groups`.
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
This allows the category_id filter for the bookmark
report to work with polymorphic bookmarks. Honestly this
is a little hardcode-y at the moment but until we go and
make this report a lot more flexible with more filters
I don't think it's worth the work to add extra interfaces
to RegisteredBookmarkable and BaseBookmarkable to make
this more flexible. This is enough for now.
This was causing issues on some sites, having the const, because this really is heavily
dependent on upload speed. We request 5-10 URLs at a time with this endpoint; for
a 1.5GB upload with 5mb parts this could mean 60 requests to the server to get all
the part URLs. If the user's upload speed is super fast they may request all 60
batches in a minute, if it is slow they may request 5 batches in a minute.
The other external upload endpoints are not hit as often, so they can stay as constant
values for now. This commit also increases the default to 20 requests/minute.
We have not used anything related to bookmarks for PostAction
or UserAction records since 2020, bookmarks are their own thing
now. Deleting all this is just cleaning up old cruft.
Latest redis interoduces a block form of multi / pipelined, this was incorrectly
passed through and not namespaced.
Fix also updates logster, we held off on upgrading it due to missing functions
This fixes a corner case of the perf optimization in d4e35f5.
When you have the the same post showing in multiple tab/devices and like
said post in one place, we updated the like count but didn't flip the
`acted` bool in the front-end. This caused a small visual desync.
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
A bit of a mixed bag, this addresses several edge areas of bookmarks and makes them compatible with polymorphic bookmarks (hidden behind the `use_polymorphic_bookmarks` site setting). The main ones are:
* ExportUserArchive compatibility
* SyncTopicUserBookmarked job compatibility
* Sending different notifications for the bookmark reminders based on the bookmarkable type
* Import scripts compatibility
* BookmarkReminderNotificationHandler compatibility
This PR also refactors the `register_bookmarkable` API so it accepts a class descended from a `BaseBookmarkable` class instead. This was done because we kept having to add more and more lambdas/properties inline and it was very messy, so a factory pattern is cleaner. The classes can be tested independently as well.
Some later PRs will address some other areas like the discourse narrative bot, advanced search, reports, and the .ics endpoint for bookmarks.
Admins won't be able to disable strip_image_metadata if they don't
disable composer_media_optimization_image_enabled first since the later
will strip the same metadata on client during upload, making disabling
the former have no effect.
Bug report at https://meta.discourse.org/t/-/223350
When a user views a topic that contains a topic timer to publish to a
restricted category, an error occurs on the client side because the user
does not have access to information about the category.
This commit fixes it such that the topic timer is not shown to the user
if the user does not have access to the category.
`TestLogger` was responsible for some flaky specs runs:
```
Error during failsafe response: undefined method `debug' for #<TestLogger:0x0000556c4b942cf0 @warnings=1>
Did you mean? debugger
```
This commit also cleans up other uses of `FakeLogger`
This was due to a server side bug when unicode usernames have been
enabled. We were double encoding the unicode username in the URL
resulting in a invalid URL.
This happened only for languages other than "en" and when `I18n.t` was called without any interpolation keys. The lib still tried to interpolate keys because it interpreted the `overrides` option as interpolation key.
When an admin enters a badly formed regular expression in the
permalink_normalizations site setting, a RegexpError exception is
generated everytime a URL is normalized (see Permalink.normalize_url).
The new validator validates every regular expression present in the
setting value (delimited by '|').
If the identity provider does not provide a precise username value, then we should use our UserNameSuggester to generate one and use it for the override. This makes the override consistent with initial account creation.
Bianca Nenciu
David Taylor
Gerhard Schlager
Osama Sayegh
Martin Brennan
Johannes Faigle
Penar Musaraj
Daniel Waterworth
Loïc Guitaut
Alan Guo Xiang Tan
Isaac Janzen
Arpit Jalan
Sam
Rafael dos Santos Silva
Roman Rizzi
Jarek Radosz