This did not work properly everytime because the destination URL was
saved in a cookie and that can be lost for various reasons. This commit
redirects the user to invited topic if it exists.
raw_html posts (i.e. those which are pulled as part of our comments integration) don't go through our markdown pipeline, so `upload://` URLs are not supported. Running pull_hotlinked_images will break any images in the post.
In future we may add support for pulling hotlinked images in these posts. But for now, disabling it will stop it breaking images.
When emailing a group inbox and including other support-type
emails (or even just regular ones with autoresponders) in the
CC field, each automated reply to the group inbox triggered
more emails to be sent out to all CC addresses to notify them
of the new reply, which in turn caused more automated emails
to be sent to the group inbox.
This commit fixes the issue by preventing any emails being sent
by the PostAlerter when the new post has an incoming email record
which is_auto_generated, which we detect in Email::Receiver.
Via the API it is possible to create a user with an integer username. So
123 instead of "123". This causes the following 500 error:
```
NoMethodError (undefined method `unicode_normalize' for 1:Integer)
app/models/user.rb:276:in `normalize_username'
```
See: https://meta.discourse.org/t/222281
Fixes the issue where making a user x as owner of a post doesn't
cause the concerned topic to be listed in new owner's `My Posts`
top menu filter
per https://meta.discourse.org/t/199369
can_permanently_delete field in Post and TopicViewDetails serializers
cannot use Guardian's can_permanently_delete beause their use is
different. The field from the serializers is used to show the button
and the button is shown even if the post cannot be removed forever
because not enough time has passed since it was first deleted. The
guardian method is used by the controller to check that the post can
really be deleted.
Previous to this change if any of the assets were not allowed extensions
they would simply be silently ignored, this could lead to broken themes
that are very hard to debug
Our group fabrication creates groups with name "my_group_#{n}" where n
is the sequence number of the group being created. However, this can
cause the test to be flaky if and when a group with name `my_group_10`
is created as it will be ordered before
`my_group_9`. This commits makes the group names determinstic to
eliminate any flakiness.
This reverts commit 558bc6b746.
In certain instances when viewing a category, the name of a group with
restricted visilbity may be revealed to users which do not have the
required permission.
This commit introduces a new use_polymorphic_bookmarks site setting
that is default false and hidden, that will be used to help continuous
development of polymorphic bookmarks. This setting **should not** be
enabled anywhere in production yet, it is purely for local development.
This commit uses the setting to enable create/update/delete actions
for polymorphic bookmarks on the server and client side. The bookmark
interactions on topics/posts are all usable. Listing, searching,
sending bookmark reminders, and other edge cases will be handled
in subsequent PRs.
Comprehensive UI tests will be added in the final PR -- we already
have them for regular bookmarks, so it will just be a matter of
changing them to be for polymorphic bookmarks.
Under some conditions, replacing an `<img` with `![]()` can break rendering, and make the image disappear.
Context at https://meta.discourse.org/t/152801
* DEV: add testing for multi del on keys
Following #15905 we were missing some tests, this covers cases where
del is used in the form of .del(key1,key2)
Tags (and tag groups) can be configured so that they can only be used in specific categories and (optionally) restrict topics in these categories to be able to add/use only these tags. These restrictions work as expected when a topic is created without going through the review queue; however, if the topic has to be reviewed by a moderator then these restrictions currently aren't checked before the topic is sent to the review queue, but they're checked later when a moderator tries to approve the topic. This is because if a user manages to submit a topic that doesn't meet the restrictions, moderators won't be able to approve and it'll be stuck in the review queue.
This PR prevents topics that don't meet the tags requirements from being sent to the review queue and shows the poster an error message that indicates which tags that cannot be used.
Internal ticket: t60562.
Previously, our `upload://` protocol urls were only supported in markdown image tags. This meant that our PullHotlinkedImages job was forced to convert `<img` tags to markdown. Depending on the exact syntax, this can actually cause the image to break.
This commit adds support for `upload://` inside regular HTML `<img` tags. In a future commit, we'll be able to use this to make our PullHotlinkedImages job much more robust.
Context at https://meta.discourse.org/t/152801
Since we give a 200 response for login errors, we should be checking
whether the error key exists in each case or not.
Some tests were broken, because they weren't checking.
* FIX: Redirect if Discourse-Xhr-Redirect is present
`handleRedirect` was passed an wrong argument type (a string) instead of
a jqXHR object and missed the fields checked in condition, thus always
evaluating to `false`.
* FIX: Add `errors` field if group update confirmation
An explicit confirmation about the effect of the group update is
required if the default notification level changes. Previously, if the
confirmation was missing the API endpoint failed silently returning
a 200 response code and a `user_count` field. This change ensures that
a proper error code is returned (422), a descriptive error message and
the additional information in the `user_count` field.
This commit also refactors the API endpoint to use the
`Discourse-Xhr-Redirect` header to redirect the user if the group is
no longer visible.
PostAnalyzer and CookedPostProcessor both replace URLs with oneboxes.
PostAnalyzer did not use the max_oneboxes_per_post site and setting and
CookedPostProcessor replaced at most max_oneboxes_per_post URLs ignoring
the oneboxes that were replaced already by PostAnalyzer.
If the crawled page returned an error, `FinalDestination#safe_get`
yielded `nil` for `uri` and `chunk` arguments. Another problem is that
`get` did not handle the case when `safe_get` failed and did not return
the `location` and `set_cookie` headers.
Previously we would issue a 403 for all invalid routes under `/tags/c/...`, which is not semantically correct. In some cases, these 403'd routes would then be handled successfully in the Ember app, leading to some very confusing behavior.
If a group's messageable_level is set to nobody then staff can't should not be able to send PMs to it.
Co-authored-by: Martin Brennan <martin@discourse.org>
* DEV: Allow params to be passed on topic redirects
There are several places where we redirect a url to a standard topic url
like `/t/:slug/:topic_id` but we weren't always passing query parameters
to the new url.
This change allows a few more query params to be included on the
redirect. The new params that are permitted are page, print, and
filter_top_level_replies. Any new params will need to be specified.
This also prevents the odd trailing empty page param that would
sometimes appear on a redirect. `/t/:slug/:id.json?page=`
* rubocop: fix missing space after comma
* fix another page= reference
* FEATURE: use canonical links in posts.rss feed
Previously we used non canonical links in posts.rss
These links get crawled frequently by crawlers when discovering new
content forcing crawlers to hop to non canonical pages just to end up
visiting canonical pages
This uses up expensive crawl time and adds load on Discourse sites
Old links were of the form:
`https://DOMAIN/t/SLUG/43/21`
New links are of the form
`https://DOMAIN/t/SLUG/43?page=2#post_21`
This also adds a post_id identified element to crawler view that was
missing.
Note, to avoid very expensive N+1 queries required to figure out the
page a post is on during rss generation, we cache that information.
There is a smart "cache breaker" which ensures worst case scenario is
a "page drift" - meaning we would publicize a post is on page 11 when
it is actually on page 10 due to post deletions. Cache holds for up to
12 hours.
Change only impacts public post RSS feeds (`/posts.rss`)
This update topic route has never worked. Better late than never. I am
in favor of using non-slug urls when using the api so I do think we
should fix this route.
Just thought I would update the `:id` param to `:topic_id` here in the
routes file instead of updating the controller to handle both params.
Added a spec to test this route.
Also added the same constraint we have on other topic routes to ensure
we only pass in an ID that is a digit.
The `blocked onebox domains` setting lets site owners change what sites
are allowed to be oneboxed. When a link is entered into a post,
Discourse checks the domain of the link against that setting and blocks
the onebox if the domain is blocked. But if there's a chain of
redirects, then only the final destination website is checked against
the site setting.
This commit amends that behavior so that every website in the redirect
chain is checked against the site setting, and if anything is blocked
the original link doesn't onebox at all in the post. The
`Discourse-No-Onebox` header is also checked in every response and the
onebox is blocked if the header is set to "1".
Additionally, Discourse will now include the `Discourse-No-Onebox`
header with every response if the site requires login to access content.
This is done to signal to a Discourse instance that it shouldn't attempt
to onebox other Discourse instances if they're login-only. Non-Discourse
websites can also use include that header if they don't wish to have
Discourse onebox their content.
Internal ticket: t59305.
Previously, if an admin user tried to add/remove
users to another user's ignored list, it would
be added to their own ignore list because the
controller used current_user. Now for admins only
a source_user_id parameter can be passed through,
which will be used to ignore the target user for
that source user.
The user can select what happens with a bookamrk after it expires. New
option allow bookmark's reminder to be kept even after it has expired.
After a bookmark's reminder notification is created, the reminder date
will be highlighted in red until the user resets the reminder date.
User can do that using the new Clear Reminder button from the dropdown.
The search_ignore_accents site setting can be used to make the search
indexer remove the accents before indexing the content. The unaccent
function from PostgreSQL is better than Ruby's unicode_normalize(:nfkd).
When creating files with create-multipart, if the file
size was somehow zero we were showing a very unhelpful
error message to the user. Now we show a nicer message,
and proactively don't call the API if we know the file
size is 0 bytes in JS, along with extra console logging
to help with debugging.
Some product pages on Amazon are using a new HTML structure, meaning the previous Onebox engine was unable to gather the price and/or description. This change should allow these pages to be Oneboxed.
Dan Ungureanu
David Taylor
Martin Brennan
Blake Erickson
Faizaan Gagan
Bianca Nenciu
Sam
Alan Guo Xiang Tan
Rafael dos Santos Silva
Mark VanLandingham
Osama Sayegh
Penar Musaraj
Daniel Waterworth
Jarek Radosz
Vinoth Kannan
Ayke Halder
jbrw