The search_ignore_accents site setting can be used to make the search
indexer remove the accents before indexing the content. The unaccent
function from PostgreSQL is better than Ruby's unicode_normalize(:nfkd).
when bundler is loaded, it sets the `RUBYOPT` environment variable to setup bundler. However, it was causing weird errors like the following when we try to install
custom plugin gems into a specific directory.
```
/home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:214:in `rescue in load_spec_files': https://github.com/discourse/mail.git is not yet checked out. Run `bundle install` first. (Bundler::GitError)
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:210:in `load_spec_files'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/path.rb:107:in `local_specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/source/git.rb:178:in `specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/lazy_specification.rb:88:in `__materialize__'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:75:in `block in materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:72:in `map!'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/spec_set.rb:72:in `materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:468:in `materialize'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:190:in `specs'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/definition.rb:238:in `specs_for'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/runtime.rb:18:in `setup'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler.rb:151:in `setup'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/setup.rb:20:in `block in <top (required)>'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/ui/shell.rb:136:in `with_level'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/ui/shell.rb:88:in `silence'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/gems/2.7.0/gems/bundler-2.3.5/lib/bundler/setup.rb:20:in `<top (required)>'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/site_ruby/2.7.0/rubygems/core_ext/kernel_require.rb:85:in `require'
from /home/tgxworld/.asdf/installs/ruby/2.7.5/lib/ruby/site_ruby/2.7.0/rubygems/core_ext/kernel_require.rb:85:in `require'
```
Some product pages on Amazon are using a new HTML structure, meaning the previous Onebox engine was unable to gather the price and/or description. This change should allow these pages to be Oneboxed.
This PR adds an extra description to the 2FA page when granting a user admin access. It also introduces a general system for adding customized descriptions that can be used by future actions.
(Follow-up to dd6ec65061)
* DEV: Show only top level replies
Adds a new query param to the topic view so that we can filter out posts
that aren't top level replies. If a post is a reply to another post
instead of the original topic post we should not include it in the
response if the `filter_top_level_replies` query param is present.
* add rspec test
`Dir.glob` doesn't guarantee any particular order for results. However, it does appear to be consistent on a given machine. This means that specs can consistently pass on one machine while consistently failing on another. This can lead to some very confusing situations!
This commit sorts the spec files alphabetically so that load order is consistent across environments.
Note that the order in which tests are **run** is not affected by this change. Run order is still randomized by RSpec
This allows text editors to use correct syntax coloring for the heredoc sections.
Heredoc tag names we use:
languages: SQL, JS, RUBY, LUA, HTML, CSS, SCSS, SH, HBS, XML, YAML/YML, MF, ICS
other: MD, TEXT/TXT, RAW, EMAIL
```
warning: Passing a Node as the second parameter to Node.new is deprecated. Please pass a Document instead, or prefer an alternative constructor like Node#add_child. This will become an error in a future release of Nokogiri.
```
This commit introduces a new environment variable `RAISE_THEME_ERRORS`
that can control what happens when `theme:update` Rake task errors. It
can have three possible values: `0` to always print errors, `1` to
always raise on error, or be absent to use the default behavior which
raises errors only for default sites.
Previously email validations could fire when deleting posts if for
certain reasons any user validations fail on the user objects
This kind of condition could happen in core due to a corruption of a
user record, or via a plugin that introduces a new validation on User
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
This will allow consumers (e.g. the discourse-prometheus plugin) to separate topic-timings and message-bus requests. It also fixes the is_background boolean for subfolder sites.
Example error:
```
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: already initialized constant EMBER_CLI
/__w/discourse/discourse/lib/tasks/assets.rake:3: warning: previous definition of EMBER_CLI was here
```
This commit handles the edge case where a draft is lost with no warnings if the user edits the title (or category/tags) of a topic while they're replying.to the same topic. Repro steps are as follows:
1. Start replying to a topic and type enough to get a draft saved.
2. Scroll up to the topic title and click the pencil icon next to the topic title, change the title, category and/or tags, and then save the changes.
3. Reload the page and you'll see that the draft is gone.
This happens because we only allow 1 draft per topic per user and when you edit the title of a topic that you're replying to, from the server perspective it'll look like as if you've submitted your reply so it will advance the draft sequence for the topic and delete the draft.
The fix in this commit makes `PostRevisor` skip advancing the draft sequence when a topic's title is edited using the pencil button next to the title.
Internal ticket: t60854.
Co-authored-by: Robin Ward <robin.ward@gmail.com>
This option will make it so the [quote] bbcode will always
include the HTML link to the quoted post, even if a topic_id
is not provided in the PrettyText#cook options. This is so
[quote] bbcode can be used in other places, like chat messages,
that always need the link and do not have an "off-topic" ID
to use.
Revert "BUGFIX: use a more widely compatible version of sadd"
This reverts commit aa577f11fd.
I think the compatibility might not be a problem anymore, after 8 years? 😃
The default of 1Mb was preventing some valid Onebox requests from successfully completing.
Increasing this to 5Mb should reduce the number of unexpected failures.
Since we already have perfectly sensible logic for validating email addresses,
let's leverage that and simplify the logic while we're at it.
Emails with spaces are no longer permitted (why were they?)
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
Themes often cache `nil` values in a DistributedCache. This bug meant that we were re-calculating some values on every request, AND triggering message-bus publishing on every request.
This fix should provide a significant performance improvement for busy sites.
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
When parent category or grandparent category is muted, then category should be muted as well.
Still, it can be overridden by setting individual subcategory notification level.
CategoryUser record is not created, mute for subcategories is purely virtual.
These calls were originally introduced to ensure that any stale users were cleaned up regularly. This is quite an expensive process to run on every `GET /presence/get` call, and will also cause errors during readonly mode.
Since the original introduction of this logic, we added the `Jobs::PresenceChannelAutoLeave` which runs every minute. That should be enough to clean up any stale users.
Note that users which explicitly `leave` a channel are still removed immediately. This auto_leave logic just takes care of clients which have disappeared without leaving.
This commit introduces two new APIs for handling unused uploads, one
can be used to exclude uploads in bulk when the data model allow and
the other one excludes uploads one by one.
We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
To make this possible in development mode, the `sourceURL=` implementation needs to include something plugin-specific. This has no effect on production.
The asset version is bumped in order to trigger a re-compilation of plugin JS assets.
Without this parameter, requests for sourcemaps on shared-CDN multisites will not be routed to the correct database, resulting in a 404.
The stylesheet content now depends on the site hostname, so the hostname has been added to the digest.
The `assets:precompile` rake task loads the full Ruby app, which can consume around 500mb of RAM by itself. Using `exec` to run `ember build` allows us to free up the Ruby memory and make more space for `ember build`
This makes a small improvement to 'cold cache' ember-cli build times, and a large improvement to 'warm cache' build times
The ember-auto-import update means that vendor is now split into multiple files for efficiency. These are named `chunk.*`, and should be included immediately after the `vendor.js` file. This commit also updates the rails app to render script tags for these chunks.
This change was previously merged, and caused memory-related errors on RAM-constrained machines. This was because Webpack 5 switches from multiple worker processes to a single multi-threaded process. This meant that it was hitting node's default heap size limit (~500mb on a 1GB RAM server). Discourse's standard install procedure recommends adding 2GB swap to 1GB-RAM machines, so we can afford to override's Node's default via the `--max-old-space-size` flag.
The chat quoting mechanism will need to be able to generate
markdown for all kinds of uploads. The UploadMarkdown class
was missing generation for video and audio uploads. This
commit adds that in, and also expands the server-side regex
recognition of FileHelper types to match those in uploads.js,
and adds a spec for UploadMarkdown
When a site has secure media enabled and a post is with secure
media, we were incorrectly cooking custom emoji URLs and using the
secure URL for those emojis, even though they should not be
considered secure (their corresponding upload records in the
database are _not_ secure). Now instead of the blanket
post.with_secure_media? boolean for the secure: param, we also
want to make sure the image whose URL is being cooked is also
_not_ a custom emoji.
This will allow pretty text deprecations / errors / warnings to appear in the Rails logs, rather than disappearing silently.
(implementation adapted from `discourse_js_processor.rb`)
This is intended for use by plugins which are building their own
topic lists, and want to include PMs alongside regular topics (e.g.
discourse-assign). It does not get used directly in core.
Redis supports deleting multiple keys at once using the `del` command and so does the `redis` gem: 21ec1dec06/lib/redis/commands/keys.rb (L188-L193). However, our wrapper around the `del` method currently accepts only one argument and expects it to be a string so it's impossible to delete multiple keys at once.
This PR changes the signature of the `DiscourseRedis#del` method so it accepts any number of arguments and makes sure all keys are properly namespaced before calling the `del` implementation of the `redis` gem.
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
Ember CLI gives sourcemaps their own digest. Our `s3.rake` logic assumes that the digest portion of sourcemap filenames remains the same.
The Ember CLI sourcemaps are included in the manifest file, so we can ensure they are uploaded by letting them past the MiniMime check.
Followup to abefb1beff
If no path is supplied, browsers will look for the map on the same path as the JS file itself. This fixes two problems that we see in production:
1. When compiling assets against one CDN, and then re-using them on a site with a different CDN, the sourceMappingUrls would be incorrect and print warnings in the console
2. If both an S3 CDN and an app CDN are configured, we were using the S3 CDN for the JS and the app CDN for the map. This commit will make sure we use the S3 CDN for both.
ember-cli already runs terser on its output. Running it through again provides no benefit, takes longer, and also breaks source mapping of these assets in production.
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* FEATURE: RS512, RS384 and RS256 COSE algorithms
These algorithms are not implemented by cose-ruby, but used in the web
authentication API and were marked as supported.
* FEATURE: Use all algorithms supported by cose-ruby
Previously only a subset of the algorithms were allowed.
This can be disabled by setting `EMBER_CLI_PROD_ASSETS=0`, but this option will not be available for long. If your theme/plugin/site has issues under Ember CLI, please open a topic on https://meta.discourse.org
This allows plugins to override the permissions required to access
specific things like the Logster and Sidekiq web UI without the changes
leaking to the rest of Discourse routes.
Our discourse_public_exceptions middleware is designed to catch bubbled exceptions from lower in the stack, and then use `ApplicationController.rescue_with_handler` to render an appropriate error response.
When the request itself is invalid, we had an escape-hatch to skip re-dispatching the request to ApplicationController. However, it was possible to work around this by 'layering' the errors. For example, if you made a request which resulted in a 404, but **also** had some other invalidity, the escape hatch would not be triggered.
This commit ensures that these kind of 'layered' errors are properly handled, without logging warnings. It also adds detection for invalid JSON bodies and badly-formed multipart requests.
The user-facing behavior is unchanged. This commit simply prevents warnings being logged for invalid requests.
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
Sometimes, the 'message' portion of an exception isn't enough to work out what's happening. In these cases, including the exception class name can help with debugging.
Job arguments go via JSON, and so symbols will appear as strings in the Job's `#execute` method. The latest version of Sidekiq has started warning about this to reduce developer confusion.
Most of our logging goes through Rails.logger, and therefore appears in Logster at `/logs` on a site. The Sidekiq logger was bypassing this and writing directly to STDERR.
Unfortunately it's not possible to do `Sidekiq.logger = Rails.logger` because `Sidekiq#logger=` applies a number of patches to the logger instance, causing our whole logging system to break.
Instead, this commit adds a dedicated Logger instance with no output, which is then patched to forward all messages directly to `Rails.logger`
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
This adapter ensures that MiniSql locks the ActiveRecord mutex before using the raw PG connection. This ensures that multiple threads will not attempt to use the same connection simultaneously.
This commit also removes the schema_cache_concurrency freedom-patch, which is no longer required now that cross-thread connection use is controlled by the mutex.
For the original root cause of this issue, see https://github.com/rails/rails/pull/38577
When creating a direct message to a group with group SMTP
set up, and adding another person to that message in the OP,
we send an email to the second person in the OP via the group_smtp
job. This in turn creates an IncomingEmail record to guard against
IMAP double sync.
The issue with this was that this IncomingEmail (which is essentialy
a placeholder/dummy one) was having its Message-ID used as the canonical
References Message-ID for subsequent emails sent out to user_private_message
recipients (such as members of the group), causing threading issues in
the mail client. The canonical <topic/ID@HOST> format should be used
instead for these cases.
This commit fixes the issue by only using the IncomingEmail for the
OP's Message-ID if the OP was created via our handle_mail email receiver
pipeline. It does not make sense to use it in other cases.
In an earlier PR, we decided that we only want to block a domain if
the blocked domain in the SiteSetting is the final destination (/t/59305). That
PR used `FinalDestination#get`. `resolve` however is used several places
but blocks domains along the redirect chain when certain options are provided.
This commit changes the default options for `resolve` to not do that. Existing
users of `FinalDestination#resolve` are
- `Oneboxer#external_onebox`
- our onebox helper `fetch_html_doc`, which is used in amazon, standard embed
and youtube
- these folks already go through `Oneboxer#external_onebox` which already
blocks correctly
Sometimes plugins need to have additional data or options available
when rendering custom markdown features/rules that are not available
on the default opts.discourse object. These additional options should
be namespaced to the plugin adding them.
```
Site.markdown_additional_options["chat"] = { limited_pretty_text_markdown_rules: [] }
```
These are passed down to markdown rules on opts.discourse.additionalOptions.
The main motivation for adding this is the chat plugin, which currently stores
chat_pretty_text_features and chat_pretty_text_markdown_rules on
the Site object via additions to the serializer, and the Site object is
not accessible to import via markdown rules (either through
Site.current() or through container.lookup). So, to have this working
for both front + backend code, we need to attach these additional options
from the Site object onto the markdown options object.
Running `update_from_remote` and `save!` cause a number of side-effects, including instructing all clients to reload CSS files. If there are no changes, then this is wasteful, and can even cause a 'flicker' effect on clients as they reload CSS.
This commit checks if any updates are available before triggering `update_from_remote` / `save!`. This should be much faster, and stop the 'flickering' UX from happening on every themes:update run.
It also improves the output of the command to include the from/to commit hashes, which may be useful for debugging issues. For example:
```
Checking 'Alien Night | A Dark Discourse Theme' for 'default'... already up to date
Checking 'Star Wars' for 'default'... updating from d8a170dd to 66b9756f
Checking 'Media Overlay' for 'default'... already up to date
```
`account_created` email contains a URL to `/u/password-reset/TOKEN`
which means that the correct scope for the email token is
`password_reset`, not `signup`.
Our previous implementation used a simple `blocked_domain_array.include?(hostname)`
so some values were not matching. Additionally, in some configurations like ours, we'd used
"cat.*.dog.com" with the assumption we'd support globbing.
This change implicitly allows globbing by blocking "http://a.b.com" if "b.com" is a blocked
domain but does not actively do anything for "*".
An upcoming change might include frontend validation for values that can be inserted.
* FIX: Mark invites flash messages as HTML safe.
This change should be safe as all user inputs included in the errors are sanitized before sending it back to the client.
Context: https://meta.discourse.org/t/html-tags-are-explicit-after-latest-update/214220
* If somebody adds a new error message that includes user input and doesn't sanitize it, using html-safe suddenly becomes unsafe again. As an extra layer of protection, we make the client sanitize the error message received from the backend.
* Escape user input instead of sanitizing
For now this is still gated behind a `QUNIT_EMBER_CLI=1` environment variable, but will eventually become the default so that we can remove `run-qunit.js`.
If the SiteSetting `allowed_onebox_iframes` contains a value of `*`, it will use the values of `all_iframe_origins` during the Oneboxing process. If `all_iframe_origins` itself contains a value of `*`, `origins_to_regexes` will try to return a "catch-all" regex.
Other code assumes `origins_to_regexes`will return an array, so this change ensures the `*` case will return an array containing only the catch-all regex.
1. `html_doc.css('.Box.md')` always returns a truthy value (e.g. `[]`) so the second branch of the if-elsif never ran
2. `node&.css('text()')` was invalid code that would raise an error
3. Matching on h3 elements is no longer correct with the current html structure returned by GitHub
This reverts commit 2c7906999a.
The changes break some things in local development (putting JS files
into minified files, not allowing debugger, and others)
This reverts commit ea84a82f77.
This is causing problems with `/theme-qunit` on legacy, non-ember-cli production sites. Reverting while we work on a fix
This is quite complex as it means that in production we have to build
Ember CLI test files and allow them to be used by our Rails application.
There is a fair bit of glue we can remove in the future once we move to
Ember CLI completely.
The `plugin:pull_compatible_all` task is intended to take incompatible plugins and downgrade them to an earlier version. Problem is, when running the rake task in development/production environments, the plugins have already been activated. If an incompatible plugin raises an error in `plugin.rb` then the rake task will be unable to start.
This commit centralises our LOAD_PLUGINS detection, adds support for LOAD_PLUGINS=0 in dev/prod, and adds a warning to `plugin:pull_compatible_all` if it's run with plugins enabled.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
Having to load `ip_addr` is confusing especially when that file exists
to monkey patch Ruby's `IpAddr` class. Moving it to our freedom patches
folder which is automatically loaded on initialization.
Also:
* Remove an unused method (#fill_email)
* Replace a method that was used just once (#generate_username) with `SecureRandom.alphanumeric`
* Remove an obsolete dev puma `tmp/restart` file logic
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
The rake task deleted here was added back in Feb 2020
when bookmarks were first converted from PostAction
records, it is no longer needed. The ignored columns
were removed in ed83d7573e.
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
This allows authenticators to instruct the Auth::Result to override attributes without using the general site settings. This provides an easy migration path for auth plugins which offer their own "overrides email", "overrides username" or "overrides name" settings. With this new api, they can set `overrides_*` on the result object, and the attribute will be overriden regardless of the general site setting.
ManagedAuthenticator is updated to use this new API. Plugins which consume ManagedAuthenticator will instantly take advantage of this change.
This commit adds API documentation for the new upload
endpoints related to direct + multipart external uploads.
Also included is a rake task which watches the files in
the spec/requests/api directory and calls a script file
(spec/regenerate_swagger_docs) whenever one changes. This
script runs rake rswag:specs:swaggerize and then copies
the openapi.yml file over to the discourse_api_docs repo
directory, and hits a script there to convert the YML to
JSON so the API docs are refreshed while the server is
still running. This makes the loop of making a doc change
and seeing it in the local server much faster.
The rake task is rake autospec:swagger
This commit removes jQuery file uploader from Discourse,
completing the transition to Uppy. The image-uploader
and UploadMixin components are also removed in this commit
as they have already been replaced and are the only things
using jQuery file upload.
.-'~~~`-.
.' `.
| R I P |
| jquery |
| file |
| upload |
| |
\\| 2013-2021 |//
-----------------
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
When attempting to Onebox a page if there is no `meta property="og:description"` tag but there is a `meta name="description"` tag, Onebox should try to use that value.
Discourse sent only translation overrides for the current language to the client instead of sending overrides from fallback locales as well. This especially impacted en_GB -> en since most overrides would be done in English instead of English (UK).
This also adds lots of tests for previously untested code.
There's a small caveat: The client currently doesn't handle fallback locales for MessageFormat strings. That is why overrides for those strings always have a higher priority than regular translations. So, as an example, the lookup order for MessageFormat strings in German is:
1. override for de
2. override for en
3. value from de
4. value from en
As an example, the lookup order for German was:
1. override for de
2. override for en
3. value from de
4. value from en
After this change the lookup order is the same as on the client:
1. override for de
2. value from de
3. override for en
4. value from en
see /t/16381
A plugin API that allows customizing existing topic-backed static pages, like:
faq, tos, privacy (see: StaticController) The block passed to this
method has to return a SiteSetting name that contains a topic id.
```
add_topic_static_page("faq") do |controller|
current_user&.locale == "pl" ? "polish_faq_topic_id" : "faq_topic_id"
end
```
You can also add new pages in a plugin, but remember to add a route,
for example:
```
get "contact" => "static#show", id: "contact"
```
The discourse base image already contains a postgres installation, so pulling a separate postgres image is a little wasteful. Using the copy of Postgres in the discourse image saves about 20 seconds on every GitHub actions run.
This commit sets up Postgres with a few performance-improving flags, which we were already using for the `rake docker:test` task (used on our internal CI system).
If a theme name contained a double-quote, this problem could lead to invalid/unexpected HTML in the `<head>`
Note that this is not considered a security issue because themes can only be installed/named by administrators, and themes/administrators already have the ability to run arbitrary javascript.
We can fake redis transactions so that `fab!` works for redis and PG
data, but it's too slow to be used indiscriminately. Instead, you can
opt into it with the `use_redis_snapshotting` helper.
Insofar as snapshotting allows us to `fab!` more things, it provides a
speedup.
OAuth2Authenticator is considered deprecated, and isn't used in core. However, some plugins still depend on it, and this was breaking the signup of previously-staged users. There is no easy way to make an end-end test of this in core, but I will be adding an integration test in the SAML plugin.
This is a fix to address blurry onebox favicon images if the site you
are linking to happens to have a favicon.ico file that contains multiple
images.
This fix detects of we are trying to create an upload for a favicon.ico
file. We then convert it to a png and not a jpeg like we were doing. We
want a png because it will preserve transparency, otherwise if we
convert it to a jpeg we lose that and it looks bad on dark themed sites.
This fix also addresses the fact that .ico files can include multiple
images. The blurry images we were producing was caused by the
ImageMagick `-flatten` option when the .ico file had multiple images
which then squishes them all together. So for .ico files we are no
longer flattening them and instead we are grabbing the last image in the
.ico bundle and converting that single image to a png.
We previously used ConsolidateNotifications with a threshold of 1 to re-use an existing notification and bump it to the top instead of creating a new one. It produces some jumpiness in the user notification list, and it relies on updating the `created_at` attribute, which is a bit hacky.
As a better alternative, we're introducing a new plan that deletes all the previous versions of the notification, then creates a new one.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Since 3b13f1146b the email threading
in mail clients has been broken, because the random suffix meant
that the References header would always be different for non-group
SMTP email notifications sent out.
This commit fixes the issue by always using the "canonical" topic
reference ID inside the References header in the format:
topic/TOPIC_ID@HOST
Which was the old format. We also add the References header to
notifications sent for the first post arriving, so the threading
works for subsequent emails. The Message-ID header is still random
as per the previous change.
Currently we display pending posts in topics (both for author and staff
members) but the feature is only enabled when there’s an enabled global site
setting related to moderation.
This patch allows to have the same behavior for a site where there’s
nothing enabled globally but where a moderated category exists. So when
browsing a topic of a moderated category, the presence of pending posts
will be checked whereas nothing will happen in a normal category.
Currently the Message-IDs we send out for outbound email
are not unique; for a post they look like:
topic/TOPIC_ID/POST_ID@HOST
And for a topic they look like:
topic/TOPIC_ID@HOST
This commit changes the outbound Message-IDs to also have
a random suffix before the host, so the new format is
like this:
topic/TOPIC_ID/POST_ID.RANDOM_SUFFIX@HOST
Or:
topic/TOPIC_ID.RANDOM_SUFFIX@HOST
This should help with email deliverability. This change
is backwards-compatible, the old Message-ID format will
still be recognized in the mail receiver flow, so people
will still be able to reply using Message-IDs, In-Reply-To,
and References headers that have already been sent.
This commit also refactors Message-ID related logic
to a central location, and adds judicious amounts of
tests and documentation.
Themes that are imported via a ZIP file do have a `remote_theme` record in the database but the record has a blank value for the `remote_url` field which means attempting to do an update git via will result in an error.
Under some conditions, these varied responses could lead to cache poisoning, hence the 'security' label.
Previously the Rails application would serve JSON data in place of HTML whenever Ember CLI requested an `application.html.erb`-rendered page. This commit removes that logic, and instead parses the HTML out of the standard response. This means that Rails doesn't need to customize its response for Ember CLI.
* REFACTOR: Improve support for consolidating notifications.
Before this commit, we didn't have a single way of consolidating notifications. For notifications like group summaries, we manually removed old ones before creating a new one. On the other hand, we used an after_create callback for likes and group membership requests, which caused unnecessary work, as we need to delete the record we created to replace it with a consolidated one.
We now have all the consolidation rules centralized in a single place: the consolidation planner class. Other parts of the app looking to create a consolidable notification can do so by calling Notification#consolidate_or_save!, instead of the default Notification#create! method.
Finally, we added two more rules: one for re-using existing group summaries and another for deleting duplicated dashboard problems PMs notifications when the user is tracking the moderator's inbox. Setting the threshold to one forces the planner to apply this rule every time.
I plan to add plugin support for adding custom rules in another PR to keep this one relatively small.
* DEV: Introduces a plugin API for consolidating notifications.
This commit removes the `Notification#filter_by_consolidation_data` scope since plugins could have to define their criteria. The Plan class now receives two blocks, one to query for an already consolidated notification, which we'll try to update, and another to query for existing ones to consolidate.
It also receives a consolidation window, which accepts an ActiveSupport::Duration object, and filter notifications created since that value.
We have a couple of site setting, `slow_down_crawler_user_agents` and `slow_down_crawler_rate`, that are meant to allow site owners to signal to specific crawlers that they're crawling the site too aggressively and that they should slow down.
When a crawler is added to the `slow_down_crawler_user_agents` setting, Discourse currently adds a `Crawl-delay` directive for that crawler in `/robots.txt`. Unfortunately, many crawlers don't support the `Crawl-delay` directive in `/robots.txt` which leaves the site owners no options if a crawler is crawling the site too aggressively.
This PR replaces the `Crawl-delay` directive with proper rate limiting for crawlers added to the `slow_down_crawler_user_agents` list. On every request made by a non-logged in user, Discourse will check the User Agent string and if it contains one of the values of the `slow_down_crawler_user_agents` list, Discourse will only allow 1 request every N seconds for that User Agent (N is the value of the `slow_down_crawler_rate` setting) and the rest of requests made within the same interval will get a 429 response.
The `slow_down_crawler_user_agents` setting becomes quite dangerous with this PR since it could rate limit lots if not all of anonymous traffic if the setting is not used appropriately. So to protect against this scenario, we've added a couple of new validations to the setting when it's changed:
1) each value added to setting must 3 characters or longer
2) each value cannot be a substring of tokens found in popular browser User Agent. The current list of prohibited values is: apple, windows, linux, ubuntu, gecko, firefox, chrome, safari, applewebkit, webkit, mozilla, macintosh, khtml, intel, osx, os x, iphone, ipad and mac.
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
* FEATURE: Optionally send a 'noindex' header in non-canonical responses
This will be used in a SEO experiment.
Co-authored-by: David Taylor <david@taylorhq.com>
The error handling of the theme:update Rake task has been improved. If
an error occurs while updating the default site, then the exception will
be propagated and the process will exit with non-zero status.
This is a follow-up to commit 3f97f884fe.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
This applies only when a single site exists. If a theme update fails
when there are multiple sites, then it will continue updating the
remaining themes.
Use @here to mention all users that were allowed to topic directly or
through group, who liked topics or read the topic. Only first 10 users
will be notified.
Allow current user to keep existent tags when adding or removing a tag.
For example, a user could not remove a tag from a topic if the topic
had another tag that was restricted to a different category.
The code that checked this permission was duplicated everytime a new
settings of this type was added. This commit changes the behavior of
some functionality because some feature checks were bypassed for staff
members.
* DEV: Swap out optipng with oxipng
The oxipng binary has been added to our base docker image here:
244c9cb110
oxipng is a rust replacement for optipng that provides increased
performance and multi-threading. Checkout
https://github.com/shssoichiro/oxipng for more info.
* add instructions for installing oxipng
Similar to site settings, adds support for `refresh` option to theme settings.
```yaml
super_feature_enabled:
type: bool
default: false
refresh: true
```
When rendering the markdown code blocks we replace the
offending characters in the output string with spans highlighting a textual
representation of the character, along with a title attribute with
information about why the character was highlighted.
The list of characters stripped by this fix, which are the bidirectional
characters considered relevant, are:
U+202A
U+202B
U+202C
U+202D
U+202E
U+2066
U+2067
U+2068
U+2069
This commit refactors the direct external upload routes (get presigned
put, complete external, create/abort/complete multipart) into a
helper which is then included in both BackupController and the
UploadController. This is done so UploadController doesn't need
strange backup logic added to it, and so each controller implementing
this helper can do their own validation/error handling nicely.
This is a follow up to e4350bb966
Currently, Discourse rate limits all incoming requests by the IP address they
originate from regardless of the user making the request. This can be
frustrating if there are multiple users using Discourse simultaneously while
sharing the same IP address (e.g. employees in an office).
This commit implements a new feature to make Discourse apply rate limits by
user id rather than IP address for users at or higher than the configured trust
level (1 is the default).
For example, let's say a Discourse instance is configured to allow 200 requests
per minute per IP address, and we have 10 users at trust level 4 using
Discourse simultaneously from the same IP address. Before this feature, the 10
users could only make a total of 200 requests per minute before they got rate
limited. But with the new feature, each user is allowed to make 200 requests
per minute because the rate limits are applied on user id rather than the IP
address.
The minimum trust level for applying user-id-based rate limits can be
configured by the `skip_per_ip_rate_limit_trust_level` global setting. The
default is 1, but it can be changed by either adding the
`DISCOURSE_SKIP_PER_IP_RATE_LIMIT_TRUST_LEVEL` environment variable with the
desired value to your `app.yml`, or changing the setting's value in the
`discourse.conf` file.
Requests made with API keys are still rate limited by IP address and the
relevant global settings that control API keys rate limits.
Before this commit, Discourse's auth cookie (`_t`) was simply a 32 characters
string that Discourse used to lookup the current user from the database and the
cookie contained no additional information about the user. However, we had to
change the cookie content in this commit so we could identify the user from the
cookie without making a database query before the rate limits logic and avoid
introducing a bottleneck on busy sites.
Besides the 32 characters auth token, the cookie now includes the user id,
trust level and the cookie's generation date, and we encrypt/sign the cookie to
prevent tampering.
Internal ticket number: t54739.
* Revert "DEV: increase lock timeout for multisite migration (#14831)"
This partially reverts commit 337ef60303.
We need to revert the mutex around `db:status:json` because the mutex is not available unless the rails environment is loaded which the `db:status:json` doesn't load before the mutex. We can't load the environment before entering the mutex because the mutex is meant to prevent other instances of the task from loading a rails environment while the database is migrating.
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: David Taylor <david@taylorhq.com>
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
PERF: Update like count in visible posts without an extra GET per like
Currently when a user is reading a topic and some post in it receive a
like from another user, the Ember app will be notified via MessageBus
and issue a GET to `/posts/{id}` to get the new like count. This worked
fine for us until today, but it can easily create a self-inflicted DDoS
when a topic with a large number of visitors gets a large number of
likes, since we will issue `visitors * likes` GET requests requests.
This patch optimizes this flow, by sending the new like count down in
the MessageBus notification, removing any need for the extra request.
It shouldn't cause any drift on the count because we send down the full
count instead of the difference too.
Possible follow-ups could include handling like removal.
We are only using list_multipart_parts right now in the
uploads controller for multipart uploads to check if the
upload exists; thus we don't need up to 1000 parts.
Also adding a note for future explorers that list_multipart_parts
only gets 1000 parts max, and adding params for max parts
and starting parts.
Support for invites alongside DiscourseConnect was added in 355d51af. This commit fixes the guardian method so that the bulk invite button functionality also works.
* FIX: Preserve field types when updating revision
When a post was edited quickly twice by the same user, the old post
revision was updated with the newest changes. To check if the change
was reverted (i.e. rename topic A to B and then back to A) a comparison
of the initial value and last value is performed. If the check passes
then the intermediary value is dismissed and only the initial value and
the last ones are preserved. Otherwise, the modification is dismissed
because the field returned to its initial value.
This used to work well for most fields, but failed for "tags" because
the field is an array and the values were transformed to strings to
perform the comparison.
* FIX: Reset last_editor_id if revision is reverted
If a post was revised and then the same revision was reverted,
last_editor_id was still set to the ID of the user who last edited the
post. This was a problem because the same person could then edit the
same post again and because it was the same user and same post, the
system attempted to update the last one (that did not exist anymore).
This commit introduces a new s3:ensure_cors_rules rake task
that is run as a prerequisite to s3:upload_assets. This rake
task calls out to the S3CorsRulesets class to ensure that
the 3 relevant sets of CORS rules are applied, depending on
site settings:
* assets
* direct S3 backups
* direct S3 uploads
This works for both Global S3 settings and Database S3 settings
(the latter set directly via SiteSetting).
As it is, only one rule can be applied, which is generally
the assets rule as it is called first. This commit changes
the ensure_cors! method to be able to apply new rules as
well as the existing ones.
This commit also slightly changes the existing rules to cover
direct S3 uploads via uppy, especially multipart, which requires
some more headers.
FinalDestination's follow_canonical mode used for embedded topics should work when canonical URLs are relative, as specified in [RFC 6596](https://datatracker.ietf.org/doc/html/rfc6596)
We are no longer able to display the image returned by Instagram directly within a Discourse site (either in the composer, or within a cooked post within a topic), so:
- Display an image placeholder in the composer preview
- A cooked post should use an iframe to display the Instagram 'embed' content
The `白名单` term becomes `名单 白名单` after it is processed by
cppjieba in :query mode. However, `白名单` is not tokenized as such by cppjieba when it
appears in a string of text. Therefore, this may lead to failed matches as
the search data generated while indexing may not contain all of the
terms generated by :query mode. We've decided to maintain parity for now
such that both indexing and querying uses the same :mix mode. This may
lead to less accurate search but our plan is to properly support CJK
search in the future.
In preparation for adding automatic CORS rules creation
for direct S3 uploads, I am adding tests here and moving the
CORS rule definitions into a dedicated class so they are all
in the one place.
There is a problem with ensure_cors! as well -- if there is
already a CORS rule defined (presumably the asset one) then
we do nothing and do not apply the new rule. This means that
the S3BackupStore.ensure_cors method does nothing right now
if the assets rule is already defined, and it will mean the
same for any direct S3 upload rules I add for uppy. We need
to be able to add more rules, not just one.
This is not a problem on our hosting because we define the
rules at an infra level.
If the initial `get`/`head` response within `resolve` returns a status code of `103`, attempt to fetch the same URL with the alternative `small_get` method.
* FIX: allowed_theme_ids should not be persisted in GlobalSettings
It was observed that the memoized value of `GlobalSetting.allowed_theme_ids` would be persisted across requests, which could lead to unpredictable/undesired behaviours in a multisite environment.
This change moves that logic out of GlobalSettings so that the returned theme IDs are correct for the current site.
Uses get_set_cache, which ultimately uses DistributedCache, which will take care of multisite issues for us.
Bianca Nenciu
Alan Guo Xiang Tan
Jarek Radosz
jbrw
Osama Sayegh
Arpit Jalan
Joffrey JAFFEUX
Blake Erickson
David Taylor
Roman Rizzi
Dan Ungureanu
Sam
Jeff Wong
Martin Brennan
tshenry
Michael Brown
Krzysztof Kotlarek
Andrei Prigorshnev
janzenisaac
Rafael dos Santos Silva
Noah Gibbs
Natalie Tay
Martin Brennan
Neil Lalonde
Gerhard Schlager
jbrw
Robin Ward
Vinoth Kannan
Peter Zhu
Bianca Nenciu
Penar Musaraj
Dax74
Daniel Waterworth
Angus McLeod
Loïc Guitaut
Mark VanLandingham