When emails were forwarded to a group inbox by the email address
of the group, for example when an email ends up in spam and must
be manually forwarded to the group+site@discoursemail.com address,
the OP of the topic ended up being the group's email address instead
of the sender who originally sent the email to the group inbox.
This commit detects that an email has been forwarded using existing
tools, and if the from address matches one of the group incoming
email addresses, then we look at the forwarded email's from address
and use that instead for the incoming email from address as well as
the staged/regular user used for the Topic.user.
This will make it much cleaner to forward emails into a group inbox,
and will prevent issues with PostAlerter where the OP is double-notified
for these emails.
Currently, pinned topics are ordered by the `bumped_at` column. This behavior is not desired because it gives admins no control over the order of pinned topics. This PR makes pinned topics ordered by the `pinned_at` column. A topic that is pinned last appears first in topic lists. If an admin wants an already pinned topic to appear first in the list of pinned topics, they'll have to unpin that topic and pin it again.
Meta topic: https://meta.discourse.org/t/how-do-i-set-the-order-of-pinned-topics/16935/23?u=osama.
Emails can include the marker in a different language, depending on
site and user settings. The email receiver always looked for the marker
in default language.
Uploads can be reused between site settings. This change allows the same
upload to be exported only once and then the same file is reused. The
same applies to import.
Allow admins to configure exceptions to our Rails rate limiter.
Configuration happens in the environment variables, and work with both
IPs and CIDR blocks.
Example:
```
env:
DISCOURSE_MAX_REQS_PER_IP_EXCEPTIONS: >-
14.15.16.32/27
216.148.1.2
```
Sections with unreserverd characters will appear url-encoded and need to
be unescaped before using it.
Wikipedia generates 2 different spans in this case in the same page, one
with an id resulting of replacing the % symbols with . and the other with
the decoded version of the string. For example, for /wiki/foo#A%C3%A1A it
will generate:
<span id="A.C3.A1A"></span>
<span id="AáA">AáA</span>
Unescaping the `m_url_hash_name` should work in all cases to target the
proper section span.
When a post is flagged with the reason of 'Something Else' a brief message can be added by the user which subsequently creates a `meta_topic` private message. The group `moderators` is automatically added to this topic.
If category group moderation is enabled, and the post belongs to a category with a reviewable group, that group should also be added to the meta_topic.
Note: This extends the `notify_moderators` logic, and will add the reviewable group to the meta_topic, regardless of the settings of that group.
In 2018 check was added that TL1 welcome message is sent unless user already has BasicBadge granted.
I think we should also check if BasicBadge is even enabled. Otherwise, each time group is assigned to a user and trust level is recalculated, they will receive a welcome message.
The following example message would generate an exception:
```
Return-Path: <discourse@bar.com>
From: Foo Bar <discourse@bar.com>
To: reply+4f97315cc828096c9cb34c6f1a0d6fe8@bar.com
Date: Fri, 15 Jan 2016 00:12:43 +0100
Message-ID: <21@foo.bar.mail>
Mime-Version: 1.0
Content-Type: text/html; charset=UTF-8
</div>
```
Exception:
```
NoMethodError:
undefined method `split' for nil:NilClass
```
This reverts a part of changes introduced by https://github.com/discourse/discourse/pull/13947
In that PR I:
1. Disallowed topic feature links for TL-0 users
2. Additionally, disallowed just putting any URL in topic titles for TL-0 users
Actually, we don't need the second part. It introduced unnecessary complexity for no good reason. In fact, it tries to do the job that anti-spam plugins (like Akismet plugin) should be doing.
This PR reverts this second change.
This adds an optional ENV variable, `EMBER_CLI_PROD_ASSETS`. If truthy,
compiling production assets will be done via Ember CLI and will replace
the assets Rails would otherwise use.
This disallows putting URLs in topic titles for TL0 users, which means that:
If a TL-0 user puts a link into the title, a topic featured link won't be generated (as if it was disabled in the site settings)
Server methods for creating and updating topics will be refusing featured links when they are called by TL-0 users
TL-0 users won't be able to put any link into the topic title. For example, the title "Hey, take a look at https://my-site.com" will be rejected.
Also, it improves a bit server behavior when creating or updating feature links on topics in the categories with disabled featured links. Before the server just silently ignored a featured link field that was passed to him, now it will be returning 422 response.
We are still on a version of pretender since 2017
https://github.com/pretenderjs/pretender/releases/tag/v1.6.1
Since then many changes have been made, including adding support
for xhr.upload. Upgrading will let us write proper acceptance
tests for uppy, which uses XmlHTTPRequest internally including
xhr.upload.
Updates pretender to 3.4.7 and fake-xml-http-request to 2.1.2.
Note: There have been no breaking changes in the releases that would
affect us, mainly dropping support for old node versions.
* FIX: Update draft count when sequence is increased
Sometimes users ended up having a draft count higher than the actual
number of drafts.
* FIX: Do not update draft count twice
The call to DraftSequence.next! above already does it.
Discourse automatically sends a private message after backup or
restore finished. The private message used to contain the log inline
even when it was very long. A very long log can create issues because
the length of the post will be over the maximum allowed length of a
post. When that happens, Discourse will try to create an upload with
the logs. If that fails, it will trim the log and inline it.
Inlining secure images with the same name was not possible because they
were indexed by filename. If an email contained two files with the same
name, only the first image was used for both of them. The other file
was still attached to the email.
When the Reply-To header is present for incoming emails we
want to use it instead of the from address. This is usually the
case when forwarding an email via a mailing list into Discourse.
For now we are only using the Reply-To header if the email has
been forwarded via Google Groups, which is why we are checking the
X-Original-From header too. In future we may want to use the Reply-To
header in more cases.
Searching in a category looked only one level down, ignoring the site
setting max_category_nesting. The user interface did not support the
third level of categories and did not display them in the "Categorized"
input of the advanced search options.
* FEATURE: Onebox can match engines based on the content_type
`FinalDestination` now returns the `content_type` of a resolved URL.
`Oneboxer` passes this value to `Onebox` itself. Onebox engines can now specify a `matches_content_type` regex of content_types that the engine can handle, regardless of the URL.
`ImageOnebox` will match URLs with a content type of `image/png`, `jpg`, `gif`, `bmp`, `tif`, etc.
This will allow images that exist at a URL without a file type extension to be correctly rendered, assuming a valid `content_type` is returned.
When a post is created, the draft sequence is increased and then older
drafts are automatically executing a raw SQL query. This skipped the
Draft model callbacks and did not update user's draft count.
I fixed another problem related to a raw SQL query from Draft.cleanup!
method.
We shouldn't be checking if a user is allowed to do an action in the logger. We should be checking it just before we perform the action. In fact, guardians in the logger can make things even worse in case of a security bug. Let's say we forgot to check user's permissions before performing some action, but we still have a call to the guardian in the logger. In this case, a user would perform the action anyway, and this action wouldn't even be logged!
I've checked all cases and I confirm that we're safe to delete this calls from the logger.
I've added two calls to guardians in admin/user_controller. We didn't have security bugs there, because regular users can't access admin/... routes at all. But it's good to have calls to guardian in these methods anyway, neighboring methods have them.
This adds a few different things to allow for direct S3 uploads using uppy. **These changes are still not the default.** There are hidden `enable_experimental_image_uploader` and `enable_direct_s3_uploads` settings that must be turned on for any of this code to be used, and even if they are turned on only the User Card Background for the user profile actually uses uppy-image-uploader.
A new `ExternalUploadStub` model and database table is introduced in this pull request. This is used to keep track of uploads that are uploaded to a temporary location in S3 with the direct to S3 code, and they are eventually deleted a) when the direct upload is completed and b) after a certain time period of not being used.
### Starting a direct S3 upload
When an S3 direct upload is initiated with uppy, we first request a presigned PUT URL from the new `generate-presigned-put` endpoint in `UploadsController`. This generates an S3 key in the `temp` folder inside the correct bucket path, along with any metadata from the clientside (e.g. the SHA1 checksum described below). This will also create an `ExternalUploadStub` and store the details of the temp object key and the file being uploaded.
Once the clientside has this URL, uppy will upload the file direct to S3 using the presigned URL. Once the upload is complete we go to the next stage.
### Completing a direct S3 upload
Once the upload to S3 is done we call the new `complete-external-upload` route with the unique identifier of the `ExternalUploadStub` created earlier. Only the user who made the stub can complete the external upload. One of two paths is followed via the `ExternalUploadManager`.
1. If the object in S3 is too large (currently 100mb defined by `ExternalUploadManager::DOWNLOAD_LIMIT`) we do not download and generate the SHA1 for that file. Instead we create the `Upload` record via `UploadCreator` and simply copy it to its final destination on S3 then delete the initial temp file. Several modifications to `UploadCreator` have been made to accommodate this.
2. If the object in S3 is small enough, we download it. When the temporary S3 file is downloaded, we compare the SHA1 checksum generated by the browser with the actual SHA1 checksum of the file generated by ruby. The browser SHA1 checksum is stored on the object in S3 with metadata, and is generated via the `UppyChecksum` plugin. Keep in mind that some browsers will not generate this due to compatibility or other issues.
We then follow the normal `UploadCreator` path with one exception. To cut down on having to re-upload the file again, if there are no changes (such as resizing etc) to the file in `UploadCreator` we follow the same copy + delete temp path that we do for files that are too large.
3. Finally we return the serialized upload record back to the client
There are several errors that could happen that are handled by `UploadsController` as well.
Also in this PR is some refactoring of `displayErrorForUpload` to handle both uppy and jquery file uploader errors.
In badge queries for 'First Share' and 'Nice/Good/Great Share' badges,
check that the user exists.
For 'Nice+ Share' badges, also grant badges if the number of shares is
equal to the threshhold count to better match the descriptions.
The cache_fullpath for the Stylesheet::Manager was the same for
every test runner in a parallel test environment, so when other
specs or other places e.g. the stylesheets_controller_spec ran
rm -rf Stylesheet::Manager.cache_fullpath this caused errors
for other specs running that went through the
Stylesheet::Manager::Builder#compile path, causing the error
```
Errno::ENOENT:
No such file or directory @ rb_sysopen
```
Also fixed the stylesheet_controller which was interpolating Rails.root + CACHE_PATH
itself instead of just using Stylesheet::Manager.cache_fullpath
Prior to this fix, post whisperer in personal messages are revealed in
the topic's participants list even though non-staff users are unable to
see the whisper.
Using an invalid value was allowed. This commit tries to automatically
fix the color by adding missing # symbol or will show an error to the
user if it is not possible and it is not a CSS color either.
Not specifying an `Accept-Language` should be equivalent to specifying an `Accept-Language` of `*`, however some webservers seem to prefer it if we are explicit about being able to handle a response of content in any language.
There was a bunch of warnings repeated over and over during spec runs:
```
/var/www/discourse/lib/tasks/release_note.rake:3: warning: already initialized constant DATE_REGEX
/var/www/discourse/lib/tasks/release_note.rake:3: warning: previous definition of DATE_REGEX was here
/var/www/discourse/lib/tasks/release_note.rake:5: warning: already initialized constant CHANGE_TYPES
/var/www/discourse/lib/tasks/release_note.rake:5: warning: previous definition of CHANGE_TYPES was here
```
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
This change largely targets dev users, but it could potentially change
behaviour in production.
Jamie Wilson & I debugged a problem where "should not be larger than the
maximum thumbnail size" would fail due to timeouts.
On our systems, on ImageMagick 7.1.0-2, with inkscape installed, IM would
attempt to rasterise the svg then check the resulting filesize, causing the
test to timeout.
As of now, we haven't found a way to cause this to behave better, but have a
workaround in that forcing IM to use the internal renderer (`MSVG:`) seems to
make it perform the same on development workstations as it does in our docker
container.
Configuring staged users to watch categories and tags is a way to sign
them up to get many emails. These emails may be unwanted and get marked
as spam, hurting the site's email deliverability.
Users can opt-in to email notifications by logging on to their
account and configuring their own preferences.
If staff need to be able to configure these preferences on behalf of
staged users, the "allow changing staged user tracking" site setting
can be enabled. Default is to not allow it.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* DEV: Improve rake `release_note:generate` date handling
A commit-ish value like HEAD@{2021-01-01} is based on the **local state** of HEAD on that date. It does not use dates attached to commits.
Instead, the rake task now detects date-like strings and supplies them to `git log` via the `--after` and `--before` flags
* Skip printing plugin when there are no changes found
A list of skipped plugins is printed on a single line at the end of the output
After every new random record created using the `dev:populate` rake task a new Discourse event will be triggered. So the plugins can modify the records if needed.
Fixes two issues:
- ignores invalid XML in custom icon sprite SVG file (and outputs an error if sprite was uploaded via admin UI)
- clears SVG sprite cache when deleting an `icons-sprite` upload in a theme
By default, Twitter will return the URL for the avatar image of the tweet poster as the `og:image` value.
However, if the `user_generated` attribute is true, we should not use this as the avatar URL as this will be an URL of an image in the tweet itself (e.g., an image belonging to a tweeted news story).
If user had a staged account and logged in using a third party service
a different username was suggested. This change will try to use the
username given by the authentication provider first, then the current
staged username and last suggest a new one.
The date shown in topic timeline was one day later if the post at that
position was made near midnight. This happened because the days number
was rounded down.
User flair was given by user's primary group. This PR separates the
two, adds a new field to the user model for flair group ID and users
can select their flair from user preferences now.
This TODO comment has existed for 8 years. Sort must be working just
fine or we would have prioritized fixing it.
Removing this comment as a tiny step toward keeping our codebase nice
and tidy.
This PR adds uppy to the project with a custom JS build and the shims needed to import it into our JS code. We need a custom build of Uppy because we do not use webpack for our JS modules/build. The only way to get what you want from Uppy is to use the webpack modules or to include the entire Uppy project including all plugins in a single JS file. This way we can just use the plugins we actually want. Future PRs will actually use Uppy!
Take 2 of https://github.com/discourse/discourse/pull/13466.
Fixes a few issues with the original PR:
- color definition stylesheet target now includes the theme id, to avoid themes set to use the default color scheme loading the same stylesheet
- changes the internal cache key for color definition stylesheet to reset the pre-existing cache
`bin/rake annotate` is an alias of `bin/annotate --models`
`bin/rake annotate:clean` generates annotations by using a temporary, freshly migrated database. This should help us to produce more consistent annotations, even if development databases have been polluted by plugin migrations.
A GitHub actions task is also added which generates annotations on a clean database, and raises an error if they differ from the committed annotations.
Bianca Nenciu
Martin Brennan
Kris
Penar Musaraj
Joffrey JAFFEUX
Osama Sayegh
Dan Ungureanu
Arpit Jalan
Alan Guo Xiang Tan
Rafael dos Santos Silva
Chema Balsas
jbrw
Krzysztof Kotlarek
Andrei Prigorshnev
Dmitry Klimensky
Laurent Arnoud
Robin Ward
Jean
Gerhard Schlager
wbhouston
Neil Lalonde
Jarek Radosz
Vinoth Kannan
Michael Brown
David Taylor
Kim Lindberger
Guhyoun Nam
Kane York
Blake Erickson
dependabot[bot]