Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
* Setting the cookie for the correct path, and not having it on root
* Correctly removing the cookie on first login
This fix ensures that when a topic title is edited the new title shows
up in the post webhook instead of the old title.
Rather than passing in the old topic object to the PostRevisor the
PostRevisor initializer will load the updated topic object inside of the
initializer if you don't pass it in. This will allow the post_edited
webhook to have the correct topic values.
Original bug reported at:
https://meta.discourse.org/t/post-edited-webhook-does-not-reflect-updated-topic-title/144722
Attempt 2, with more test.
Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
Setting the cookie for the correct path, and not having it on root
Correctly removing the cookie on first login
Additionally correctly handle cookie path for authentication_data
There were two bugs that exposed an interesting case where two discourse
instances hosted across two subfolder installs in the same domain
with oauth may clash and cause strange redirection on first login:
Log in to example.com/forum1. authentication_data cookie is set with path /
On the first redirection, the current authentication_data cookie is not unset.
Log in to example.com/forum2. In this case, the authentication_data cookie
is already set from forum1 - the initial page load will incorrectly redirect
the user to the redirect URL from the already-stored cookie, to /forum1.
This removes this issue by:
* Setting the cookie for the correct path, and not having it on root
* Correctly removing the cookie on first login
* DEV: Replace User.unstage and User#unstage API with User#unstage!
Quoting @SamSaffron:
> User.unstage mixes concerns of both unstaging users and updating params which is fragile/surprising.
> u.unstage destroys notifications and raises a user_unstaged event prior to the user becoming unstaged and the user object being saved.
User#unstage! no longer updates user attributes and saves the object before triggering the `user_unstaged` event.
* Update one more spec
* Assign attributes after unstaging
Meta report: https://meta.discourse.org/t/short-url-secure-uploads-s3/144224
* if the show_short route is hit for an upload that is
secure, we redirect to the secure presigned URL. however
this was not taking into account multisite so the db name
was left off the path which broke the presigned URL
* we now use the correct url_for method if we know the
upload (like in the show_short case) which takes into
account multisite
In development, if the ApplicationController is reloaded, then, previous
to this commit we were emitting an instance of the previous RenderEmpty
class, but rescuing from the reloaded instance.
Looking up RenderEmpty by its fully qualified name fixes this.
On some sites when bootstrapping communities it is helpful to bootstrap
with a "light weight" invite code.
Use the site setting `invite_code` to set a global invite code.
In this case the administrator can share the code with
a community which is very easy to remember and then anyone who has
that code can easily register accounts.
People without the invite code are not allowed account registration.
Global invite codes are less secure than indevidual codes, in that they
tend to leak in the community however in some cases when starting a brand
new community the security guarantees of invites are not needed.
* This PR changes the user activity bookmarks stream to show a new list of bookmarks based on the Bookmark record.
* If a bookmark has a name or reminder it will be shown as metadata above the topic title in the list
* The categories, tags, topic status, and assigned show for each bookmarked post based on the post topic
* Bookmarks can be deleted from the [...] menu in the list
* As well as this, the list of bookmarks from the quick access panel is now drawn from the Bookmarks table for a user:
* All of this new functionality is gated behind the enable_bookmarks_with_reminders site setting
The /bookmarks/ route now redirects directly to /user/:username/activity/bookmarks-with-reminders
* The structure of the Ember for the list of bookmarks is not ideal, this is an MVP PR so we can start testing this functionality internally. There is a little repeated code from topic.js.es6. There is an ongoing effort to start standardizing these lists that will be addressed in future PRs.
* This PR also fixes issues with feature detection for at_desktop bookmark reminders
A custom date and time can now be selected for a bookmark reminder
The reminder will not happen at the exact time but rather at the next 5 minute interval of the bookmark reminder schedule.
This PR also fixes issues with bulk deleting topic bookmarks.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
This commit ensures that an error is thrown when a user fails to be
removed from a group instead of silently failing.
This means when using the api you will receive a 400 instead of a 200 if
there is a failure. The remove group endpoint allows the removal of
multiple users, this change means that if you try to delete 10 users,
but 1 of them fails you will receive a 400 instead of 200 even though
the other 9 were removed successfully. Rather than adding a bunch more
complexity I think this is more than adequate for most use cases.
Introduces `/user-cards.json`
Also allows the client-side user model to be passed an existing promise when loading, so that multiple models can share the same AJAX request
Meta: https://meta.discourse.org/t/improve-error-message-when-not-including-name-setting-up-totp/143339
* when the user creates a TOTP second factor method we want
to show them a nicer error if they forget to add a name
or the code from the app, instead of the param missing error
* also add a client-side check for this and for security key name,
no need to bother the server if we can help it
Anonymous users could query the invite json and see counts and
summaries which is not allowed in the UX of Discourse.
This commit has those endpoints return a 403 unless the user is
allowed to invite.
When admin changes a user's email from the preferences page of that user:
* The user will not be sent an email to confirm that their
email is changing. They will be sent a reset password email
so they can set the password for their account at the new
email address.
* The user will still be sent an email to their old email to inform
them that it was changed.
* Admin and staff users still need to follow the same old + new
confirm process, as do users changing their own email.
This normalizes it so we only carry one place for grabbing disk space size
It also normalizes the command made so it uses Discourse.execute_command
which splits off params in a far cleaner way.
Now if a group is visible but unmentionable, users can search for it
when composing by typing with `@`, but it will be rendered without the
grey background color.
It will also no longer pop up a JIT warning saying "You are about to
mention X people" because the group will not be mentioned.
### UI Changes
If `SiteSetting.enable_bookmarks_with_reminders` is enabled:
* Clicking "Bookmark" on a topic will create a new Bookmark record instead of a post + user action
* Clicking "Clear Bookmarks" on a topic will delete all the new Bookmark records on a topic
* The topic bookmark buttons control the post bookmark flags correctly and vice-versa
Disabled selecting the "reminder type" for bookmarks in the UI because the backend functionality is not done yet (of sending users notifications etc.)
### Other Changes
* Added delete bookmark route (but no UI yet)
* Added a rake task to sync the old PostAction bookmarks to the new Bookmark table, which can be run as many times as we want for a site (it will not create duplicates).
This commit adds support for an optional "logout" parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a "logout=true" parameter to the encoded/signed "sso" payload,
then Discourse will treat the request as a logout request instead
of an authentication request. The logout flow works something like
this:
* User requests logout at SSO-Consumer site (e.g., clicks "Log me out!"
on web browser).
* SSO-Consumer site does whatever it does to destroy User's session on
the SSO-Consumer site.
* SSO-Consumer then redirects browser to the Discourse sso_provider
endpoint, with a signed request bearing "logout=true" in addition
to the usual nonce and the "return_sso_url".
* Discourse destroys User's discourse session and redirects browser back
to the "return_sso_url".
* SSO-Consumer site does whatever it does --- notably, it cannot request
SSO credentials from Discourse without the User being prompted to login
again.
When 'categories topics' setting is set to 0, the system will
automatically try to find a value to keep the two columns (categories
and topics) symmetrical.
The value is computed as 1.5x the number of top level categories and at
least 5 topics will always be returned.
Adds a new route `/u/{username}/card.json`, which has a reduced number of fields. This change is behind a hidden site setting, so we can test compatibility before rolling out.
* FEATURE: Replace existing badge owners when using the bulk award feature
* Use ActiveRecord to sanitize title update query, Change replace checkbox text
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
* UX: Invalid CSV error message now includes information about the malformed line
* Update config/locales/server.en.ym and use line_number instead of lineno
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
Co-authored-by: Robin Ward <robin.ward@gmail.com>
When editing site texts from
/admin/customize/site_texts/
you can edit badge titles (aka name) and this will update any users that
have that badge currently set as their title. This fix prevents a badge
description text from being set as their title if an admin updates the
badge description text or any other badge fields that aren't the title.
On some customer forums we are randomly getting a "You must select a valid user" error when sending a PM even when all parameters seem to be OK. This is an attempt to track it down with more data.
Previously if local login via email was disabled because of the site setting or because SSO was enabled, we were raising a 500 error. We now raise a 403 error instead; we shouldn't raise 500 errors on purpose, instead keeping that code for unhandled errors. It doesn't make sense in the context of what we are validating either to raise a 500.
* When we refactored away the admin-login route we introduced a bug where admins could not log into an SSO enabled site, because of a check in the email_login route that disallowed this.
* Allow admin to get around this check.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
FIX: raised a proper NotFound exception when filtering groups by username with invalid username.
FIX: properly filter the groups based on current user visibility when viewing another user's groups.
DEV: Guardian.can_see_group?(group) is now using Guardian.can_see_groups(groups) instead of duplicating the same code.
FIX: spec for groups_controller#index when group directory is disabled for logged in user.
FIX: groups_controller.sortable specs to actually test all sorting combinations.
DEV: s/response_body/body/g for slightly shorter spec code.
FIX: rewrote the "view another user's groups" specs to test all group_visibility and members_group_visibility combinations.
DEV: Various refactoring for cleaner and more consistent code.
* UI: Mass grant a badge from the admin ui
* Send the uploaded CSV and badge ID to the backend
* Read the CSV and grant badge in batches
* UX: Communicate the result to the user
* Don't award if badge is disabled
* Create a 'send_notification' method to remove duplicated code, slightly shrink badge image. Replace router transition with href.
* Dynamically discover current route
When using the login confirmation screen, the referrer URL is `/auth/{provider}`. That means that the user is redirected back to the confirmation screen after logging in, even though login was successful. This is very confusing. Instead, they should be redirected to the homepage.
* Reapply "Rename 'target usernames' with 'target recipients' in Composer"
This reverts commit 9fe11d0fc3 which
reverted ebb288dc2c.
* DEV: Add test for replying to PM
if SiteSetting.secure_media is disabled we still want to
redirect to the signed url for uploads that are marked as
secure because their ACLs are probably still private
* Add a rake task to disable secure media. This sets all uploads to `secure: false`, changes the upload ACL to public, and rebakes all the posts using the uploads to make sure they point to the correct URLs. This is in a transaction for each upload with the upload being updated the last step, so if the task fails it can be resumed.
* Also allow viewing media via the secure url if secure media is disabled, redirecting to the normal CDN url, because otherwise media links will be broken while we go and rebake all the posts + update ACLs
Providing invalid dates as the end_date or start_date param causes a 500 error and creates noise in the logs. This will handle the error and returns a proper 400 response to the client with a message that explains what the problem is.
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
SingleSignOnProvider is expecting a sso param later in the chain. If sso param is not found it will cause a 500 with the following exception: `NoMethodError (undefined method `unpack1' for nil:NilClass)` as `set_return_sso_url` is attempting to decode it: https://github.com/discourse/discourse/blob/master/lib/single_sign_on_provider.rb#L19
The following methods have long been deprecated in ruby due to flaws in their implementation per http://blade.nagaokaut.ac.jp/cgi-bin/vframe.rb/ruby/ruby-core/29293?29179-31097:
URI.escape
URI.unescape
URI.encode
URI.unencode
escape/encode are just aliases for one another. This PR uses the Addressable gem to replace these methods with its own encode, unencode, and encode_component methods where appropriate.
I have put all references to Addressable::URI here into the UrlHelper to keep them corralled in one place to make changes to this implementation easier.
Addressable is now also an explicit gem dependency.
* DEV: Remove unused omit_stats variable from user serializer
This was hard-coded to true in a8b5192efd, and is no longer used anywhere
* Remove attribute declarations
When uploading a theme/component, depending on the extension of the
file and the OS/Browser being used, the content type might differ.
This adds the "application/x-zip-compressed" content type that is being
sent by most Browsers on latest Windows when uploading a .zip file.
Note: All of this functionality is hidden behind a hidden, default false, site setting called `enable_bookmarks_with_reminders`. Also, any feedback on Ember code would be greatly appreciated!
This is part 1 of the bookmark improvements. The next PR will address the backend logic to send reminder notifications for bookmarked posts to users. This PR adds the following functionality:
* We are adding a new `bookmarks` table and `Bookmark` model to make the bookmarks a first-class citizen and to allow attaching reminders to them.
* Posts now have a new button in their actions menu that has the icon of an actual book
* Clicking the button opens the new bookmark modal.
* Both name and the reminder type are optional.
* If you close the modal without doing anything, the bookmark is saved with no reminder.
* If you click the Cancel button, no bookmark is saved at all.
* All of the reminder type tiles are dynamic and the times they show will be based on your user timezone set in your profile (this should already be set for you).
* If for some reason a user does not have their timezone set they will not be able to set a reminder, but they will still be able to create a bookmark.
* A bookmark can be deleted by clicking on the book icon again which will be red if the post is bookmarked.
This PR does NOT do anything to migrate or change existing bookmarks in the form of `PostActions`, the two features live side-by-side here. Also this does nothing to the topic bookmarking.
It's possibly that when trying to upload a backup the free space check
will output scientific notation resulting in an incorrect "There is not
enough space on disk" error.
The free space check uses the Linux `print` command which could return a
number using scientific notation like `1.60459e+10` and when ruby
converts it to an integer it will have the value of `1` instead of
`16045879296`. Which means even though you have 16GB of free space you
could not upload a 1GB backup file.
This commit uses the `printf` command instead which allows you to
specify that you do not want scientific notation.
I'm not sure why this hasn't been an issue before, but I was
experiencing it locally in development.
But the "synonyms" can't use the TagSerializer yet. We still have some
code from the discourse-tagging plugin that uses "text" instead of
"name", "count" instead of "topic_count", etc. We should make the js
consistent with the TagSerializer and then stop using tag_counts_json.
If for some reason an URL was create in this format:
```
?slug[]=foo&slug[]=bar
```
This would have create an exception of this kind:
```
NoMethodError (undefined method `tr' for ["foo", "bar"]:Array
Did you mean? try)
```
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
Some endpoints are returning i18n keys instead of translated messages
and with these changes, the site_texts endpoint can help translating
those.
Pagination part is needed for better wildcard support. For example,
looking for 'js.notifications' would set 'has_more' to true, but return
only the first 50 messages with no way of fetching the remaining.
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
Note:
```
def foo(bar: 1)
end
foo({bar: 2})
# raises a deprecation, instead use:
foo(**{bar: 2})
```
Additionally when matching regexes always use strings. It does not make
sense to match a non string to a regex.
We already cache failed onebox URL requests client-side, we now want to cache this on the server-side for extra protection. failed onebox previews will be cached for 1 hour, and any more requests for that URL will fail with a 404 status. Forcing a rebake via the Rebake HTML action will delete the failed URL cache (like how the oneboxer preview cache is deleted).
When uploading a file to a theme component, and that file is existing and has already been marked as secure, we now automatically mark the file as secure: false, change the ACL, and log the action as the user (also rebake the posts for the upload)
This is a bottom up rewrite of Discourse cache to support faster performance
and a limited surface area.
ActiveSupport::Cache::Store accepts many options we do not use, this partial
implementation only picks the bits out that we do use and want to support.
Additionally params are named which avoids typos such as "expires_at" vs "expires_in"
This also moves a few spots in Discourse to use Discourse.cache over setex
Performance of setex and Discourse.cache.write is similar.
This amends our API so we provide it with the draft key when saving a post
this means post creator can clean up the draft consistently even if we are
doing fancy stuff like replying to a new topic or new pm or whatever.
There will be some followup work to clean it up so client never calls destroy
on draft during normal operation and the #create/#update endpoints takes care of it
every time
If current value is nil we should use `&.` combined with `dig` to protect diff from erroring
It is happening when for example theme is delete (new value is empty)
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
When category is dismissed, `dismiss_new` message is sent to fronted to clean state.
In addition, I noticed that when old dismiss new button is clicked, no message is sent so I decided to kill two birds with one stone.
- Show old and new email address during the process
- Ensure correct user is logged on when attempting to make email changes
- Support reloading a page during the email reset process without resubmit
of form
- Improve tests
- Fixed issue where redirect back to site was not linking correctly in
subfolder setups
Internal refactor of single action into 4 distinct actions that are simpler
to reason about.
This also removes the step that logs on an account after you confirm an
email change, since it is no longer needed which leaves us with safer
internals.
This left me no choice but to amend translations cause the old route was
removed.
The group card and group members page were affecting each other and were
leaking members list and the query parameters which led to bad UX
experience and sub-optimal performance (client made more queries because
it was loading fewer members).
This commit refactors the group model to make it more consistent, remove
dead code, move error handling outside of model.
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
* When viewing a tag, the search widget will now show a checkbox to scope the search by tag, which will limit search results to that tag on desktop and mobile
This brings the behavior in line with native Discourse SSO. If login is required, and a user tries to visit the forum, they will be directed straight to the external login page without requiring any clicks.
This method had grown into a monster. Its query had bugs
that I couldn't fix, and new features would be hard to add.
Also I don't understand how it all works anymore...
Replace it with common table expressions that can be queried
to generate the results we need, instead of subtracting
results using lots of "NOT IN" clauses.
Fixed are bugs with tag schemas that use combinations of
tag groups, parent tags, and one-tag-per-topic restrictions.
For example: https://meta.discourse.org/t/130991/6
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
These are the changes to tags routing that correspond to the category
routing changes of d84c34ad. The new scheme is:
/tags/c/*slug_path/:id/none/:tag_id/ENDPOINT
/tags/c/*slug_path/:id/none/:tag_id
/tags/c/*slug_path/:id/:tag_id/ENDPOINT
/tags/c/*slug_path/:id/:tag_id
In a category's settings, the Tags tab has two new fields to
specify the number of tags that must be added to a topic
from a tag group. When creating a new topic, an error will be
shown to the user if the requirement isn't met.
The routes for categories are changing. The scheme that I intend to move
us to is:
/c/*slug_path/(:id)/ENDPOINT
/c/*slug_path/(:id)
This commit adds support for the new scheme to the server side without
dropping support for existing URLs. It is necessary to support existing
URLs for two reasons:
* This commit does not change any client side routing code,
* Posts that contain category hashtags that refer to a root category
are baked into URLs that do not fit this new scheme, (/c/[id]-[slug])
This is a major change to draft internals. Previously there were quite a
few cases where the draft system would say "draft saved", when in fact
we just skipped saving.
This commit ensures the draft system deals with draft ownership handover in
a predictable way.
For example:
- Window 1 editing draft
- Window 2 editing same draft at the same time
Previously we would allow window 1 and 2 to just fight on the same draft
each window overwriting the same draft over an over.
This commit introduces an ownership concept where either window 1 or 2 win
and user is prompted on the loser window to reload screen to correct the issue
This also corrects edge cases where a user could have multiple browser windows
open and posts in 1 window, later to post in the second window. Previously
drafts would break in the second window, this corrects it.
* DEV: Add the actual "tag_groups/new" route
Allows refreshing the "new" page without an error.
* DEV: Prevent attempts to create group tags if tagging is disabled
* DEV: Refactor the tag-groups controller
Gets rid of `selectedItem`, `selected`, and `selectTagGroup` action.
* DEV: Rename tag-groups-show to tag-groups-edit
* DEV: Refactor tag-groups form
* Extracted the tag-groups-form that's used by tag-groups-new and tag-groups-edit
* The model is now a buffered property
* Serialization relies more heavily on RestAdapter now
* Data is sent as JSON
* Payload is now namespaced ("tag_group")
* Update app/assets/javascripts/discourse/controllers/tag-groups-new.js.es6
Co-Authored-By: Joffrey JAFFEUX <j.jaffeux@gmail.com>
* Update app/assets/javascripts/discourse/components/tag-groups-form.js.es6
Co-Authored-By: Joffrey JAFFEUX <j.jaffeux@gmail.com>
* Update app/assets/javascripts/discourse/controllers/tag-groups-edit.js.es6
Co-Authored-By: Joffrey JAFFEUX <j.jaffeux@gmail.com>
* Require q param in /tags/filter/search route.
* If not provided this route was causing a 500 error when
DiscourseTagging.clean_tag was called, because .downcase
was being called on the param (which was nil).
* Now return a 400 error instead.
Anonymous users are only possible if allow_anonymous_posting is true,
which means that 'user.is_anonymous' check implies that
allow_anonymous_posting is true.
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
This fix ensures that searches that contain a null byte return a 400
error instead of causing a 500 error.
For some reason from rspec we will reach the raise statement inside
of the `rescue_from ArgumentError` block, but outside of rspec it will
not execute the raise statement and so a 500 is thrown instead of
reaching the `rescue_from Discourse::InvalidParameters` block inside of
the application controller.
This fix raises Discourse::InvalidParameters directly from the search
controller instead of relying on `PG::Connection.escape_string` to
raise the `ArgumentError`.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
`suspend` isn't a User attribute, but was being assigned to the frontend User model as if it was. The model has a computed property that depends on `suspended_till`, so instead of overriding this property, it's better to return relevant attributes.
Fixes a computed-property.override deprecation (https://emberjs.com/deprecations/v3.x#toc_computed-property-override)
* FIX: Do not encode the URL twice
Now that we encode slugs in the server we don't need this anymore.
Reverts fe5na33
* FIX: More places do deal with encoded slugs
* the param is a string now, not a hash
* FIX: Handle the nil slug on /categories
* DEV: Add seeded? method to identity default categories
* DEV: Use SiteSetting to keep track of seeded categories
This feature amends it so instead of using one challenge and honeypot
statically per site we have a rotating honeypot and challenge value which
changes every hour.
This means you must grab a fresh copy of honeypot and challenge value once
an hour or account registration will be rejected.
We also now cycle the value of the challenge when after successful account
registration forcing an extra call to hp.json between account registrations
Client has been made aware of these changes.
Additionally this contains a JavaScript workaround for:
https://bugs.chromium.org/p/chromium/issues/detail?id=987293
This is client side code that is specific to Chrome user agent and swaps
a PASSWORD type honeypot with a TEXT type honeypot.
When an admin changes the site setting slug_generation_method to
encoded, we weren't really encoding the slug, but just allowing non-ascii
characters in the slug (unicode).
That brings problems when a user posts a link to topic without the slug, as
our topic controller tries to redirect the user to the correct URL that contains
the slug with unicode characters. Having unicode in the Location header in a
response is a RFC violation and some browsers end up in a redirection loop.
Bug report: https://meta.discourse.org/t/-/125371?u=falco
This commit also checks if a site uses encoded slugs and clear all saved slugs
in the db so they can be regenerated using an onceoff job.
We were mixing in 20 or so methods into a controller just to use a single
one.
The helper itself is not the actual implementation anyway... MobileDetection
is responsible here.
If the setting is turned on, then the user will receive information
about the subject: if it was deleted or requires some special access to
a group (only if the group is public). Otherwise, the user will receive
a generic #404 error message. For now, this change affects only the
topics and categories controller.
This commit also tries to refactor some of the code related to error
handling. To make error pages more consistent (design-wise), the actual
error page will be rendered server-side.
Using popups is becoming increasingly rare. Full page redirects are already used on mobile, and for some providers. This commit removes all logic related to popup authentication, leaving only the full page redirect method.
For more info, see https://meta.discourse.org/t/do-we-need-popups-for-login/127988
* FEATURE: Adds an extra protection layer when decompressing files.
* Rename exporter/importer to zip importer. Update old locale
* Added a new composite class to decompress a file with multiple strategies
* Set max file size inside a site setting
* Ensure that file is deleted after compression
* Sanitize path and files before compressing/decompressing
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
The current manifest validation in Chrome requires at least one
non-maskable icon to make it installable.
This commit adds the maskable entry as another entry, following up
on changes added in 3e590b8
Because:
- Chrome 78 and Firefox Fenix have support for it
- The icons will look better by using all the availiable space
- Admins can control the icon and add appropriate padding since we have a
dedicated asset for the manifest logo. Read more about it on
https://css-tricks.com/maskable-icons-android-adaptive-icons-for-your-pwa/
This commit:
- Adds a new key under the icons array in the webmanifest, named purpose
with maskable value.
In development, we track the last requested theme id, and use that to refresh the correct stylesheet targets. The after_action hook runs on every request, but the preview_theme_id parameter is only sent on the initial HTML request. This commit ensures we only fetch the development theme_id on HTML requests
New site setting: `embed_any_origin` that will send postMessages to
wildcard origins `*` instead of the referer.
Most of the time you won't want to do this, so the setting is default to
`false`. However, there are certain situations where you want to allow
embedding to send post messages when there is no HTTP REFERER.
For example, if you created a native mobile app and you wanted to embed a list
of Discourse topics as HTML. In the code your HTML would be a
static file/string, which would not be able to send a referer. In this
case, the site setting will allow the embed to work.
From a security standpoint we currently only use `postMessage` to send
data about the size of the HTML document and scroll position, so it
should be enable if required with minimal security ramifications.
* Extract QuickAccessPanel from UserNotifications.
* FEATURE: Quick access panels in user menu.
This feature adds quick access panels for bookmarks and personal
messages. It allows uses to browse recent items directly in the user
menu, without being redirected to the full pages.
* REFACTOR: Use QuickAccessItem for messages.
Reusing `DefaultNotificationItem` feels nice but it actually requires a
lot of extra work that is not needed for a quick access item.
Also, `DefaultNotificationItem` shows an incorrect tooptip ("unread
private message"), and it is not trivial to remove / override that.
* Use a plain JS object instead.
An Ember object was required when `DefaultNotificationItem` was used.
* Prefix instead suffix `_` for private helpers.
* Set to null instead of deleting object keys.
JavaScript engines can optimize object property access based on the
object’s shape. https://mathiasbynens.be/notes/shapes-ics
* Change trivial try/catch to one-liners.
* Return the promise in case needs to be waited on.
* Refactor showAll to a link with href
* Store `emptyStatePlaceholderItemText` in state.
* Store items in Session singleton instead.
We can drop `staleItems` (and `findStaleItems`) altogether. Because
`(old) items === staleItems` when switching back to a quick access
panel.
* Add `limit` parameter to the `user_actions` API.
* Explicitly import Session instead.
* FEATURE: Add tl2 threshold for editing new posts
* Adds a new setting and for tl2 editing posts (30 days same as old value)
* Sets the tl0/tl1 editing period as 1 day
* FIX: Spec uses wrong setting
* Fix site setting on guardian spec
* FIX: post editing period specs
* Avoid shared examples
* Use update_columns to avoid callbacks on user during tests
If you click a (?) icon beside the reviewable status a pop up will
appear with expanded informatio that explains how the reviewable got its
score, and how it compares to system thresholds.
When there is an overridden text in the database that belongs to
a pluralized key which doesn't exist in English anymore, the
Customize Texts admin page was unusable. This stops those keys from
ever being returned by a search.
- Adds support for iOS Universal Links via an `apple-app-site-association` endpoint
Adds support for Google Digital Asset Links at the `.well-known/assetlinks.json` endpoint
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
Previously, a regular user could not edit the title or category
of a topic if a hidden tag had already been applied.
This also stops hidden tag names from leaking in the error message.
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
This adds support for a `<d-topics-list>` tag you can embed in your site
that will be rendered as a list of discourse topics. Any attributes on
the tag will be passed as filters. For example:
`<d-topics-list discourse-url="URL" category="1234">` will filter to category 1234.
To use this feature, enable the `embed topics list` site setting. Then
on the site you want to embed, include the following javascript:
`<script
src="http://URL/javascripts/embed-topics.js"></script>`
Where `URL` is your discourse forum's URL.
Then include the `<d-topics-list discourse-url="URL">` tag in your HTML document and it will
be replaced with the list of topics.
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
This displays more useful messages for the most common issues we see:
- CSRF (when the user switches browser)
- Invalid IAT (when the server clock is wrong)
- OAuth::Unauthorized for OAuth1 providers, when the credentials are incorrect
This commit also stops earlier for disabled authenticators. Now we stop at the request phase, rather than the callback phase.
This feature (when enabled) will allow for invite_only sites to require
external authentication before they can redeem an invite.
- Created hidden site setting to toggle this
- Enables sending invites with local logins disabled
- OAuth button added to invite form
- Requires OAuth email address to match invite email address
- Prevents redeeming invite if OAuth authentication fails
This feature allows @ mentions to prioritize showing members of a group who
have explicit permission to a category.
This makes it far easier to @ mention group member when composing topics in
categories where only the group has access.
For example:
If Sam, Jane an Joan have access to bugs category.
Then `@` will auto complete to (jane,joan,sam) ordered on last seen at
This feature works on new topics and existing topics. There is an explicit
exclusion of trust level 0,1,2 groups cause they get too big.
This feature adds the ability to customize the HTML part of all emails using a custom HTML template and optionally some CSS to style it. The CSS will be parsed and converted into inline styles because CSS is poorly supported by email clients. When writing the custom HTML and CSS, be aware of what email clients support. Keep customizations very simple.
Customizations can be added and edited in Admin > Customize > Email Style.
Since the summary email is already heavily styled, there is a setting to disable custom styles for summary emails called "apply custom styles to digest" found in Admin > Settings > Email.
As part of this work, RTL locales are now rendered correctly for all emails.
* FIX: Better error when SSO fails due to blank secret
* Update spec/requests/session_controller_spec.rb
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
- will ensure this tag is not restricted to another category, and not only ensure this category can use it
- will clean tags param, in case client is sending an empty array, eg: [""], this could be solved client-side, but we ensure it won't happen ever this way
This commit contains 3 features:
- FEATURE: Allow downloading watched words
This introduces a button that allows admins to download watched words per action in a `.txt` file.
- FEATURE: Allow clearing watched words in bulk
This adds a "Clear All" button that clears all deleted words per action (e.g. block, flag etc.)
- FEATURE: List all blocked words contained in the post when it's blocked
When a post is rejected because it contains one or more blocked words, the error message now lists all the blocked words contained in the post.
-------
This also changes the format of the file for importing watched words from `.csv` to `.txt` so it becomes inconsistent with the extension of the file when watched words are exported.
* FEATURE: Allow choice of category when making a PM public
Previously it would default to uncategorized, which was not ideal on
some forums. This gives the staff member more choice about what they'd
like to do.
* Make the optional category more explicit
* Joffrey's feedback
* Revert "Revert "FEATURE: admin/user exports are compressed using the zip format (#7784)""
This reverts commit f89bd55576.
* Replace .tar.zip with .zip
This fixes the problem where if a route ends with a dynamic segment and the segment contains a period e.g. `my.name`, `name` is interpreted as the format. This applies a default format constraints `/(json|html)/` on all routes. If you'd like a route to have a different format constraints, you can do something like this:
```ruby
get "your-route" => "your_controlller#method", constraints: { format: /(rss|xml)/ }
#or
get "your-route" => "your_controlller#method", constraints: { format: :xml }
```
* FEATURE: Allow customization of robots.txt
This allows admins to customize/override the content of the robots.txt
file at /admin/customize/robots. That page is not linked to anywhere in
the UI -- admins have to manually type the URL to access that page.
* use Ember.computed.not
* Jeff feedback
* Feedback
* Remove unused import
* FEATURE: admin/user exports are compressed using the zip format
* Update translations. Theme exporter now exports .zip file. Theme importer supports .zip and .gz files
* Fix controller test, updated locale and skip saving the csv export to disk
This allows you to temporarily disable components without having to remove them from a theme.
This feature is very handy when doing quick fix engineering.
The global setting disable_search_queue_threshold
(DISCOURSE_DISABLE_SEARCH_QUEUE_THRESHOLD) which default to 1 second was
added.
This protection ensures that when the application is unable to keep up with
requests it will simply turn off search till it is not backed up.
To disable this protection set this to 0.
Adds a second factor landing page that centralizes a user's second factor configuration.
This contains both TOTP and Backup, and also allows multiple TOTP tokens to be registered and organized by a name. Access to this page is authenticated via password, and cached for 30 minutes via a secure session.
This can cause unbound CPU usage in some cases, and excessive logging in other cases. This commit moves redis readonly information into the local process, but maintains the DistributedCache for postgres readonly state.
* SECURITY: Add confirmation screen when logging in via email link
* SECURITY: Add confirmation screen when logging in via user-api OTP
* FIX: Correct translation key in session controller specs
* FIX: Use .email-login class for page
David Taylor
Jeff Wong
Blake Erickson
Robin Ward
Vinoth Kannan
Martin Brennan
Rafael dos Santos Silva
Jarek Radosz
Roman Rizzi
Martin Brennan
Daniel Waterworth
Sam Saffron
Kane York
Mark VanLandingham
Bianca Nenciu
Arpit Jalan
Joffrey JAFFEUX
Dan Ungureanu
Régis Hanol
Jay Pfaffman
Matt Marjanović
Gerhard Schlager
Osama Sayegh
Krzysztof Kotlarek
Bianca Nenciu
Neil Lalonde
dependabot-preview[bot]
Vinoth Kannan
Penar Musaraj
Mark VanLandingham
Martin Brennan
Kyle Zhao
Rimian Perkins
Rishabh
Saurabh Patel
Michael Brown
Guo Xiang Tan
Ralph Rooding