This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
This change shows a notification number besides the flag icon in the
post menu if there is reviewable content associated with the post.
Additionally, if there is pending stuff to review, the icon has a red
background.
We have also removed the list of links below a post with the flag
status. A reviewer is meant to click the number beside the flag icon to
view the flags. As a consequence of losing those links, we've removed
the ability to undo or ignore flags below a post.
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
Minor fixes to add Rails 6 support to Discourse, we now will boot
with RAILS_MASTER=1, all specs pass
Only one tiny deprecation left
Largest change was the way ActiveModel:Errors changed interface a
bit but there is a simple backwards compat way of working it
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
The error displayed when logging into suspended accounts via SSO never includes
the suspension reason, unlike non-SSO logins. By re-using the failed_to_login
method when generating the error message for SSO we can ensure the message is
consistent between the SSO and non-SSO paths.
This commit adds some improvements to native app banners for iOS and Android
- iOS and Android now have separate settings for native app banners
- app banners will now only show for users on TL1 and up
- app ids are now in a hidden site setting to allow sites to switch to their own app, if desired
- iOS only: the site URL is passed to the app arguments
If you turn it on now, default all users to approved since they were
previously. Also support approving a user that doesn't have a reviewable
record (it will be created first.)
This also includes a refactor to move class method calls to
`DiscourseEvent` into an initializer. Otherwise the load order of
classes makes a difference in the test environment and some settings
might be triggered and others not, randomly.
In certain edge cases, the message bus won't send the message to the
user about the updated review count and it can go out of sync.
This patch synchronizes the review count every time:
1. The user visits the "Needs Review" page
2. Every time the user performs an action
A new checkbox has been added to the Tags tab of the category settings modal
which is used when some tags and/or tag groups are restricted to the category,
and all other unrestricted tags should also be allowed.
Default is the same as the previous behaviour: only allow the specified set of
tags and tag groups in the category.
Conversely, if a user is deactivated the reviewable should automatically
be rejected.
Before this fix, if a user was not active they'd still show in the
review queue but without an "Approve" button which was confusing.
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
- The test_email job is removed, because it was always being run synchronously (not in sidekiq)
- 34b29f62 added a bypass for critical emails, to match the spec. This removes the bypass, and removes the spec.
- This adapts the specs for 72ffabf6, so that they check for emails being sent
- This reimplements c2797921, allowing test emails to be sent even when emails are disabled
Fixes two issues:
1. Redirecting to an external origin's path after login did not work
2. User would be erroneously redirected to the external origin after logout
https://meta.discourse.org/t/109755
This will allow users installing a Discourse PWA to use their active
theme colors on the generated app. Thanks for @mgiuca for the tip.
Also makes the share_target config explicit to silence Chrome warnings
Migrates email user options to a new data structure, where `email_always`, `email_direct` and `email_private_messages` are replace by
* `email_messages_level`, with options: `always`, `only_when_away` and `never` (defaults to `always`)
* `email_level`, with options: `always`, `only_when_away` and `never` (defaults to `only_when_away`)
* FEATURE: Exposing a way to add a generic report filter
## Why do we need this change?
Part of the work discussed [here](https://meta.discourse.org/t/gain-understanding-of-file-uploads-usage/104994), and implemented a first spike [here](https://github.com/discourse/discourse/pull/6809), I am trying to expose a single generic filter selector per report.
## How does this work?
We basically expose a simple, single generic filter that is computed and displayed based on backend values passed into the report.
This would be a simple contract between the frontend and the backend.
**Backend changes:** we simply need to return a list of dropdown / select options, and enable the report's newly introduced `custom_filtering` property.
For example, for our [Top Uploads](https://github.com/discourse/discourse/pull/6809/files#diff-3f97cbb8726f3310e0b0c386dbe89e22R1423) report, it can look like this on the backend:
```ruby
report.custom_filtering = true
report.custom_filter_options = [{ id: "any", name: "Any" }, { id: "jpg", name: "JPEG" } ]
```
In our javascript report HTTP call, it will look like:
```js
{
"custom_filtering": true,
"custom_filter_options": [
{
"id": "any",
"name": "Any"
},
{
"id": "jpg",
"name": "JPG"
}
]
}
```
**Frontend changes:** We introduced a generic `filter` param and a `combo-box` which hooks up into the existing framework for fetching a report.
This works alright, with the limitation of being a single custom filter per report. If we wanted to add, for an instance a `filesize filter`, this will not work for us. _I went through with this approach because it is hard to predict and build abstractions for requirements or problems we don't have yet, or might not have._
## How does it look like?
## More on the bigger picture
The major concern here I have is the solution I introduced might serve the `think small` version of the reporting work, but I don't think it serves the `think big`, I will try to shed some light into why.
Within the current design, It is hard to maintain QueryParams for dynamically generated params (based on the idea of introducing more than one custom filter per report).
To allow ourselves to have more than one generic filter, we will need to:
a. Use the Route's model to retrieve the report's payload (we are now dependent on changes of the QueryParams via computed properties)
b. After retrieving the payload, we can use the `setupController` to define our dynamic QueryParams based on the custom filters definitions we received from the backend
c. Load a custom filter specific Ember component based on the definitions we received from the backend
* First take
* Add support for sprites in themes
Automatically register any custom icons added via themes or plugins
* Fix theme sprite caching
* Simplify test
* Update lib/svg_sprite/svg_sprite.rb
Co-Authored-By: pmusaraj <pmusaraj@gmail.com>
* Fix /svg-sprite/search request
Since uploads site settings are now backed by an actual upload, we don't
have to reach over the network just to fetch the favicon. Instead, we
can just read the upload directly from disk.
Attempt to force NGINX to include content length when doing X-SendFile
This does not seem to be required when bypassing NGINX.
Without this header some CDNs may have issues caching
When a new post is triggered via message bus post stream will attempt to load
it, previously the `/topic/TOPIC_ID/posts.json` would unconditionally include
suggested topics, this caused excessive load on the server.
New pattern defaults to exclude suggested and related topics from this API
unless people explicitly ask for suggested.
Do not allow `/u/search/users.json` to list any group matches unless a
specific `term` is specified in the API call.
Adding groups should always be done when an actual search term exists,
blank search is only supported for users within a topic
Co-authored-by: Sam Saffron <sam.saffron@gmail.com>
Co-authored-by: David Taylor <david@taylorhq.com>
This gives more control over the request. In particular we can easily
lookup DNS dynamically, instead of only upon NGINX startup.
Previously, NGINX was looking up IP for the letter avatar service and
caching the CDN IP address, this caused issues if CDN changed IP, in
which letter avatars would be broken till a container restarted.
NGINX config has been updated to add caching. This change will require
a container rebuild.
The proxy will now function in development environments, so the patch
for `letter_avatar_proxy` has been removed.
We had a missing formats: string on our render partial that caused logs to
spam when CSS files got 404s.
Due to magic discourse_public_exceptions.rb was actually returning the
correct 404 cause it switched format when rendering the error.
Previously it would unhide their post but leave them silenced.
This fix also cleans up some of the helper classes to make it easier
to pass extra data to the silencing code (for example, a link to the
post that caused the user to be silenced.)
This patch also refactors the auto_silence specs to avoid using
stubs.
Currently the theme is matched by name, which can be fragile when there are many themes with the same name. This functionality will be used by the next version of theme CLI.
If for some reason `Discourse.store.path_for` returns `nil`, the
forum would throw an error rather than returning 404.
Why would it be `nil`? One cause could be changing the type of
file store and having the `url` field no longer be relative.
Under some conditions it was possible to pass in a user_id as an
integer, but we would try and parse it as a comma delimited string
resulting in an error. This has been fixed so that we are no longer
mapping the user_id param to user_ids.
- Themes can supply translation files in a format like `/locales/{locale}.yml`. These files should be valid YAML, with a single top level key equal to the locale being defined. For now these can only be defined using the `discourse_theme` CLI, importing a `.tar.gz`, or from a GIT repository.
- Fallback is handled on a global level (if the locale is not defined in the theme), as well as on individual keys (if some keys are missing from the selected interface language).
- Administrators can override individual keys on a per-theme basis in the /admin/customize/themes user interface.
- Theme developers should access defined translations using the new theme prefix variables:
JavaScript: `I18n.t(themePrefix("my_translation_key"))`
Handlebars: `{{theme-i18n "my_translation_key"}}` or `{{i18n (theme-prefix "my_translation_key")}}`
- To design for backwards compatibility, theme developers can check for the presence of the `themePrefix` variable in JavaScript
- As part of this, the old `{{themeSetting.setting_name}}` syntax is deprecated in favour of `{{theme-setting "setting_name"}}`
This makes more sense than having the guardian take an accessor.
The logic belongs in the Serializer, where the JSON is calculated.
Also removed some of the DRYness in the spec. It's fewer lines
and made it easier to test the option on the serializer.
Previously we killed caching on old avatars cause we kept serving blank
this meant we would front many more avatar requests after a version change
This change ensures all old avatars do not cause a flood of requests on the
server
This is a possible solution for https://meta.discourse.org/t/user-api-keys-specification/48536/19
This allows for user-api-key requests to not require a redirect url.
Instead, the encypted payload will just be displayed after creation ( which can be copied
pasted into an env for a CLI, for example )
Also: Show instructions when creating user-api-key w/out redirect
This adds a view to show instructions when requesting a user-api-key
without a redirect. It adds a erb template and json format.
Also adds a i18n user_api_key.instructions for server.en.yml
* Dashboard doesn't timeout anymore when Amazon S3 is used for backups
* Storage stats are now a proper report with the same caching rules
* Changing the backup_location, s3_backup_bucket or creating and deleting backups removes the report from the cache
* It shows the number of backups and the backup location
* It shows the used space for the correct backup location instead of always showing used space on local storage
* It shows the date of the last backup as relative date
Historically due to https://meta.discourse.org/t/why-is-discourse-so-slow-on-android/8823
we decreased page sizes of both home page and topic page on android by half.
This was done on the server side and as a side effect and caused page sizes on android
to mismatch between Android and non Android.
Unfortunately about a year ago googlebot started pretending it is Android,
this cause Google to start indexing pages as what android would see. So
it saw double the amount of pages in the index as what exists on desktop.
This in turn caused double the amount of indexing work and a large amount
of broken links on long topics.
This fix removes all special behavior which is no longer needed due to
other performance work in Discourse including raw handlebars on home page
and virtual dom on topic pages.
I tested we do not need this on Blu Advance 5.0 it has 1.3 GHZ mediatec mt6580
This phone retails for around $50 USD.
If we decide long term that we want any hacks like this we will shift them
to the client side. It can just hold data in memory without rendering.
Previously the 'reconnect' process was a bit magic - IF you were already logged into discourse, and followed the auth flow, your account would be reconnected and you would be 'logged in again'.
Now, we explicitly check for a reconnect=true parameter when the flow is started, store it in the session, and then only follow the reconnect logic if that variable is present. Setting this parameter also skips the 'logged in again' step, which means reconnect now works with 2fa enabled.
Do not send an activation email to users invited via email. They
already confirmed their email address by clicking the invite link.
Users invited via link will need to confirm their email address before
they can login.
This adds a **very basic** support for share to Discourse.
Currently, this is only supported in Android + Chrome 71+.
After installing a Discourse site to the Home Screen, you will be
able to share from anywhere in the OS to the Discourse site.
Discourse will use the title and text from the share event.
* Add missing icons to set
* Revert FA5 revert
This reverts commit 42572ff
* use new SVG syntax in locales
* Noscript page changes (remove login button, center "powered by" footer text)
* Cast wider net for SVG icons in settings
- include any _icon setting for SVG registry (offers better support for plugin settings)
- let themes store multiple pipe-delimited icons in a setting
- also replaces broken onebox image icon with SVG reference in cooked post processor
* interpolate icons in locales
* Fix composer whisper icon alignment
* Add support for stacked icons
* SECURITY: enforce hostname to match discourse hostname
This ensures that the hostname rails uses for various helpers always matches
the Discourse hostname
* load SVG sprite with pre-initializers
* FIX: enable caching on SVG sprites
* PERF: use JSONP for SVG sprites so they are served from CDN
This avoids needing to deal with CORS for loading of the SVG
Note, added the svg- prefix to the filename so we can quickly tell in
dev tools what the file is
* Add missing SVG sprite JSONP script to CSP
* Upgrade to FA 5.5.0
* Add support for all FA4.7 icons
- adds complete frontend and backend for renamed FA4.7 icons
- improves performance of SvgSprite.bundle and SvgSprite.all_icons
* Fix group avatar flair preview
- adds an endpoint at /svg-sprites/search/:keyword
- adds frontend ajax call that pulls icon in avatar flair preview even when it is not in subset
* Remove FA 4.7 font files
Previously in some cases we would queue logging of invalid post numbers
The impact would be we would miss logging an incoming link and would leak
an error.
Sam Saffron
Guo Xiang Tan
Robin Ward
Régis Hanol
David Taylor
Penar Musaraj
Saurabh Patel
Joffrey JAFFEUX
Gerhard Schlager
Chris Butler
Bianca Nenciu
Dan Ungureanu
Maja Komel
Roman Rizzi
Arpit Jalan
Tarek Khalil
Neil Lalonde
venarius
Leo McArdle
Guo Xiang Tan
Rafael dos Santos Silva
Davide Porrovecchio
Vinoth Kannan
Vinoth Kannan
Blake Erickson
Michael Brown
cfitz
Rishabh
Bianca Nenciu
Kyle Zhao
