* FEATURE: hide_email_address_taken forces use of email in forgot password form
This strengthens this site setting which is meant to be used to harden sites
that are experiencing abuse on forgot password routes.
Previously we would only deny letting people know if forgot password worked on not
New change also bans usage of username for forgot password when enabled
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
When the Forever option is selected for suspending a user, the user is suspended for 1000 years. Without customizing the site’s text, this time period is displayed to the user in the suspension email that is sent to the user, and if the user attempts to log back into the site. Telling someone that they have been suspended for 1000 years seems likely to come across as a bad attempt at humour.
This PR special case messages when a user suspended or silenced forever.
This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
This moves all the rate limiting for user second factor (based on `params[:second_factor_token]` existing) to the one place, which rate limits by IP and also by username if a user is found.
25563357 moved the logout redirect logic from the client-side to the server-side. Unfortunately the login_required check was lost during the refactoring which meant that non-login-required sites would redirect to `/login` after redirect, and immediately restart the login process. Depending on the SSO implementation, that can make it impossible for users to log out cleanly.
This commit restores the login_required check, and prevents the potential redirect loop.
- Display reason for validation error when logging in via an authenticator
- Fix email validation handling for 'Discourse SSO', and add a spec
Previously, validation errors (e.g. blocked or already-taken emails) would raise a generic error with no useful information.
1. Total 6 attempts per day per user
2. Total of 5 per unique email/login that is not found per hour
3. If an admin blocks an IP that IP can not request a reset
Timezone is guessed by moment.js if unset upon a normal login, but was not when
logging in via an email link. This adds logic to update a guessed
timezone upon email login so timezones don't end up blank.
This commit adds support for an optional "logout" parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a "logout=true" parameter to the encoded/signed "sso" payload,
then Discourse will treat the request as a logout request instead
of an authentication request. The logout flow works something like
this:
* User requests logout at SSO-Consumer site (e.g., clicks "Log me out!"
on web browser).
* SSO-Consumer site does whatever it does to destroy User's session on
the SSO-Consumer site.
* SSO-Consumer then redirects browser to the Discourse sso_provider
endpoint, with a signed request bearing "logout=true" in addition
to the usual nonce and the "return_sso_url".
* Discourse destroys User's discourse session and redirects browser back
to the "return_sso_url".
* SSO-Consumer site does whatever it does --- notably, it cannot request
SSO credentials from Discourse without the User being prompted to login
again.
Previously if local login via email was disabled because of the site setting or because SSO was enabled, we were raising a 500 error. We now raise a 403 error instead; we shouldn't raise 500 errors on purpose, instead keeping that code for unhandled errors. It doesn't make sense in the context of what we are validating either to raise a 500.
* When we refactored away the admin-login route we introduced a bug where admins could not log into an SSO enabled site, because of a check in the email_login route that disallowed this.
* Allow admin to get around this check.
SingleSignOnProvider is expecting a sso param later in the chain. If sso param is not found it will cause a 500 with the following exception: `NoMethodError (undefined method `unpack1' for nil:NilClass)` as `set_return_sso_url` is attempting to decode it: https://github.com/discourse/discourse/blob/master/lib/single_sign_on_provider.rb#L19
We like to stay as close as possible to latest with rubocop cause the cops
get better.
This update required some code changes, specifically the default is to avoid
explicit returns where implicit is done
Also this renames a few rules
* Add timezone to user_options table
* Also migrate existing timezone values from UserCustomField,
which is where the discourse-calendar plugin is storing them
* Allow user to change their core timezone from Profile
* Auto guess & set timezone on login & invite accept & signup
* Serialize user_options.timezone for group members. this is so discourse-group-timezones can access the core user timezone, as it is being removed in discourse-calendar.
* Annotate user_option with timezone
* Validate timezone values
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Adds 2 factor authentication method via second factor security keys over [web authn](https://developer.mozilla.org/en-US/docs/Web/API/Web_Authentication_API).
Allows a user to authenticate a second factor on login, login-via-email, admin-login, and change password routes. Adds registration area within existing user second factor preferences to register multiple security keys. Supports both external (yubikey) and built-in (macOS/android fingerprint readers).
* FIX: Better error when SSO fails due to blank secret
* Update spec/requests/session_controller_spec.rb
Co-Authored-By: Robin Ward <robin.ward@gmail.com>
* SECURITY: Add confirmation screen when logging in via email link
* SECURITY: Add confirmation screen when logging in via user-api OTP
* FIX: Correct translation key in session controller specs
* FIX: Use .email-login class for page
The impersonate any user by anonymous feature in dev should require a
deliberate opt-in. This way developers are better aware of the security
implications of this development only feature.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
The error displayed when logging into suspended accounts via SSO never includes
the suspension reason, unlike non-SSO logins. By re-using the failed_to_login
method when generating the error message for SSO we can ensure the message is
consistent between the SSO and non-SSO paths.
Andrei Prigorshnev
Sam
Dan Ungureanu
Arpit Jalan
Martin Brennan
David Taylor
Robin Ward
Krzysztof Kotlarek
Justin DiRose
Blake Erickson
Matt Marjanović
Martin Brennan
Joffrey JAFFEUX
Penar Musaraj
Martin Brennan
Osama Sayegh
Guo Xiang Tan
Chris Butler
Maja Komel