String.prototype.substr() is deprecated so we replace it with String.prototype.slice() which works similarily but isn't deprecated.
Signed-off-by: Tobias Speicher <rootcommander@gmail.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
2FA support in Discourse was added and grown gradually over the years: we first
added support for TOTP for logins, then we implemented backup codes, and last
but not least, security keys. 2FA usage was initially limited to logging in,
but it has been expanded and we now require 2FA for risky actions such as
adding a new admin to the site.
As a result of this gradual growth of the 2FA system, technical debt has
accumulated to the point where it has become difficult to require 2FA for more
actions. We now have 5 different 2FA UI implementations and each one has to
support all 3 2FA methods (TOTP, backup codes, and security keys) which makes
it difficult to maintain a consistent UX for these different implementations.
Moreover, there is a lot of repeated logic in the server-side code behind these
5 UI implementations which hinders maintainability even more.
This commit is the first step towards repaying the technical debt: it builds a
system that centralizes as much as possible of the 2FA server-side logic and
UI. The 2 main components of this system are:
1. A dedicated page for 2FA with support for all 3 methods.
2. A reusable server-side class that centralizes the 2FA logic (the
`SecondFactor::AuthManager` class).
From a top-level view, the 2FA flow in this new system looks like this:
1. User initiates an action that requires 2FA;
2. Server is aware that 2FA is required for this action, so it redirects the
user to the 2FA page if the user has a 2FA method, otherwise the action is
performed.
3. User submits the 2FA form on the page;
4. Server validates the 2FA and if it's successful, the action is performed and
the user is redirected to the previous page.
A more technically-detailed explanation/documentation of the new system is
available as a comment at the top of the `lib/second_factor/auth_manager.rb`
file. Please note that the details are not set in stone and will likely change
in the future, so please don't use the system in your plugins yet.
Since this is a new system that needs to be tested, we've decided to migrate
only the 2FA for adding a new admin to the new system at this time (in this
commit). Our plan is to gradually migrate the remaining 2FA implementations to
the new system.
For screenshots of the 2FA page, see PR #15377 on GitHub.
We need this in other places, this commit moves clipboardCopy
to the utilities.js lib. Had to remove use of Promise as well because
lib/utilities cannot import it, otherwise it will cause a mini racer error.
Adds up and down buttons next to the inputs of value lists when there is more than 1 item present. This helps to re-order the items in the value lists if necessary.
This commit adds a hover effect for drag and drop in
the admin emoji uploader. It also changes the "Add New
Emoji" button to open the file selector; previously it
was useless because it was disabled unless a name was
entered (which is not even a requirement for the emoji)
and also it didn't actually do anything on click even
if it wasn't disabled.
Now we have a way of adding files without having to drag
and drop them, which is nice.
Also in this PR, there was no indication before that the upload was
complete apart from the button becoming enabled again.
This commit adds the highlight class to the emoji list
and removes it once the highlight fade animation is done,
like we do for new posts.
An admin could search for all screened ip addresses in a block by
using wildcards. 192.168.* returned all IPs in range 192.168.0.0/16.
This feature allows admins to search for a single IP address in all
screened IP blocks. 192.168.0.1 returns all IP blocks that match it,
for example 192.168.0.0/16.
* FEATURE: Remove roll up button for screened IPs
* FIX: Match more specific screened IP address first
This commit should be a no-op for all existing core outlets. Outlets which are introduced by themes/plugins may see a change in behavior, and should follow the steps below if they want to maintain their previous behavior.
`tagName="" connectorTagName=""` is almost always the correct choice for plugin outlets. 40eba8cd introduced a `noTags=true` shortcut which achieved this, and left a comment saying it should be the future default. This commit does exactly that. To avoid any breaking changes for plugins, all existing plugin outlets have been reviewed and adjusted by following this logic:
1) If `noTags=true`, remove the `noTags` parameter, and do not complete any further steps
2) If `tagName` is not specified, set `tagName="span"` (the previous default)
3) If `connectorTagName` is not specified, set `selectorTagName="div"` (the previous default)
4) If `tagName=""`, remove it
5) If `connectorTagName=""`, remove it
The updates were accomplished with the help of a ruby script:
```ruby
def removeAttr(tag, attribute)
tag = tag.sub /\s#{attribute}="?\w*"? /, " "
tag = tag.sub /\s#{attribute}="?\w*"?}}/, "}}"
tag = tag.sub /^\s*#{attribute}="?\w*"?\n/, ""
tag
end
files = Dir.glob("app/assets/javascripts/**/*.hbs")
puts "Checking #{files.count} files..."
files.each do |f|
content = File.read(f)
count = 0
edits = 0
content.gsub!(/{{\s*plugin-outlet.*?}}/m) do |match|
count += 1
result = match
noTags = result.include?("noTags=true")
tagName = result[/tagName="(\w*)"/, 1]
connectorTagName = result[/connectorTagName="(\w*)"/, 1]
if noTags
result = removeAttr(result, "noTags")
else
if connectorTagName == ""
result = removeAttr(result, "connectorTagName")
elsif connectorTagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} connectorTagName=\"div\"" }
end
if tagName == ""
result = removeAttr(result, "tagName")
elsif tagName.nil?
result = result.sub(/name="[\w-]+"/) { |m| "#{m} tagName=\"span\"" }
end
end
edits += 1 if match != result
result
end
puts "#{count} outlets, #{edits} edited -> #{f}"
File.write(f, content)
end
```
This commit adds a check that runs regularly as per
2d68e5d942 which tests the
credentials of groups with SMTP or IMAP enabled. If any issues
are found with those credentials a high priority problem is added to the
admin dashboard.
This commit also formats the admin dashboard differently if
there are high priority problems, bringing them to the top of
the list and highlighting them.
The problem will be cleared if the issue is fixed before the next
problem check, or if the group's settings are updated with a valid
credential.
Now that d5e380e5c1 has been
committed there is nothing in the codebase that uses either
resumable.js or the old backup-uploader component.
R.I.P resumable.js
This commit removes the enable_experimental_backup_uploader site
setting and the flags in backups-index.hbs to make the uppy
backup uploader the main one from now on.
A follow-up commit will delete the old backup uploader code and
also remove resumable.js from the project.
This commit introduces scheduled problem checks for the admin dashboard, which are long running or otherwise cumbersome problem checks that will be run every 10 minutes rather than every time the dashboard is loaded. If these scheduled checks add a problem, the problem will remain until it is cleared or until the scheduled job runs again.
An example of a check that should be scheduled is validating credentials against an external provider.
This commit also introduces the concept of a `priority` to the problems generated by `AdminDashboardData` and the scheduled checks. This is `low` by default, and can be set to `high`, but this commit does not change any part of the UI with this information, only adds a CSS class.
I will be making a follow up PR to check group SMTP credentials.
In the composer, we already only allow for S3 multipart uploads
if enable_direct_s3_uploads is true, so in the backups uploader
that is based on Uppy we want to do the same thing. In future
if self-hosters need some way to not use S3 multipart in these
scenarios for whatever reason we can revisit this then (which
should be as simple as adding a enable_multipart_s3_uploads site
setting).
Some reports, like the Web Crawler User Agents report, have very long strings that need to be truncated when displayed. However, there is no way to see the full value without exporting the report or inspecting the elements using dev tools. This PR set a `title` attribute with the full value to the reports `<td>` elements so that the full value is shown on hover.
This takes the uppy chunking algorithm and combines it with some
form submission from resumable.js for parity with the current
backup controller to make local backup uploads work with uppy.
We can then use this to replace the resumable-upload component
and the resumable.js library from our codebase, once stable.
This is disabled by default, so people using local backups will not
be affected. The enable_experimental_backup_uploader site setting
must be enabled for this to work.
- Removes jquery
- Removes a not unregistered listener and uses component event
- Removes external-url class as it was only valid in one case of the dropdown
- Uses @action
- Tagless
- Other minor changes
This PR introduces a new `enable_experimental_backup_uploads` site setting (default false and hidden), which when enabled alongside `enable_direct_s3_uploads` will allow for direct S3 multipart uploads of backup .tar.gz files.
To make multipart external uploads work with both the S3BackupStore and the S3Store, I've had to move several methods out of S3Store and into S3Helper, including:
* presigned_url
* create_multipart
* abort_multipart
* complete_multipart
* presign_multipart_part
* list_multipart_parts
Then, S3Store and S3BackupStore either delegate directly to S3Helper or have their own special methods to call S3Helper for these methods. FileStore.temporary_upload_path has also removed its dependence on upload_path, and can now be used interchangeably between the stores. A similar change was made in the frontend as well, moving the multipart related JS code out of ComposerUppyUpload and into a mixin of its own, so it can also be used by UppyUploadMixin.
Some changes to ExternalUploadManager had to be made here as well. The backup direct uploads do not need an Upload record made for them in the database, so they can be moved to their final S3 resting place when completing the multipart upload.
This changeset is not perfect; it introduces some special cases in UploadController to handle backups that was previously in BackupController, because UploadController is where the multipart routes are located. A subsequent pull request will pull these routes into a module or some other sharing pattern, along with hooks, so the backup controller and the upload controller (and any future controllers that may need them) can include these routes in a nicer way.
This commit, while changing the watched word uploader to use
uppy, also fixes a minor bug with the UppyUploadMixin where
the file input's value was not cleared after reset, which
prevented subsequent file uploads. The composer mixin already
has this fix.
Joffrey JAFFEUX
awesomerobot
Jarek Radosz
CommanderRoot
Osama Sayegh
Penar Musaraj
Mark VanLandingham
Bianca Nenciu
Vinoth Kannan
Martin Brennan
Keegan George
Natalie Tay
Rafael dos Santos Silva
Martin Brennan
David Taylor