Previously we would always take the first image in a post to use as the
thumbnail. On media-heavy sites, users may want to manually select a
specific image as the topic thumbnail. This commit allows this to be
done via a `|thumbnail` attribute in markdown.
For example, in this case, bbb would be chosen as the thumbnail:
```
```
It used to insert block Oneboxes inside paragraphs which resulted in
invalid HTML. This needed an additional parsing for removal of empty
paragraphs and the resulting HTML could still be invalid.
This commit ensure that block Oneboxes are inserted correctly, by
splitting the paragraph containing the link and putting the block
between the two. Paragraphs left with nothing but whitespaces will
be removed.
Follow up to 7f3a30d79f.
CookedPostProcessor replaces all large images with their optimized
versions, but for GIF images the optimized version is limited to first
frame only. This caused animations it cooked posts to require a click
to show up the lightbox and start playing.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
We must guarantee that "rel=noopener" was set if "target=_blank" is present, which is not always the case for trusted users. Also, if the link contains the "nofollow" attribute, it has to have the "ugc" attribute as well.
This commit should cause no functional change
- Split into functions to avoid deep nesting
- Register custom field type, and remove manual json parse/serialize
- Recover from deleted upload records
Also adds a test to ensure pull_hotlinked_images redownloads secure images only once
When rebaking a post we were invalidating _regular_ oneboxes but not inline oneboxes.
DEV: also renamed 'InlineOneboxer.purge' to 'InlineOneboxer.invalidate' to keep
the API consistent with 'Oneboxer.invalidate'
Previously the pull hotlinked images job was skipped after system edits. This ensured that we never had an infinite loop of system-edit/pull-hotlinked/system-edit/pull-hotlinked etc.
A side effect was that edits made by system for any other reason (e.g. API, removing full quotes) would prevent pulling hotlinked images. This commit removes the system edit check, and replaces it with another method to avoid an infinite job scheduling loop.
There were two constants here, `INLINE_ONEBOX_LOADING_CSS_CLASS` and
`INLINE_ONEBOX_CSS_CLASS` that were both longer than the strings they
were DRYing up: `inline-onebox-loading` and `inline-onebox`
I normally appreciate constants, but in this case it meant that we had
a lot of JS imports resulting in many more lines of code (and CPU cycles
spent figuring them out.)
It also meant we had an `.erb` file and had to invoke Ruby to create the
JS file, which meant the app was harder to port to Ember CLI.
I removed the constants. It's less DRY but faster and simpler, and
arguably the loss of DRYness is not significant as you can still search
for the `inline-onebox-loading` and `inline-onebox` strings easily if
you are refactoring.
This introduces new APIs for obtaining optimized thumbnails for topics. There are a few building blocks required for this:
- Introduces new `image_upload_id` columns on the `posts` and `topics` table. This replaces the old `image_url` column, which means that thumbnails are now restricted to uploads. Hotlinked thumbnails are no longer possible. In normal use (with pull_hotlinked_images enabled), this has no noticeable impact
- A migration attempts to match existing urls to upload records. If a match cannot be found then the posts will be queued for rebake
- Optimized thumbnails are generated during post_process_cooked. If thumbnails are missing when serializing a topic list, then a sidekiq job is queued
- Topic lists and topics now include a `thumbnails` key, which includes all the available images:
```
"thumbnails": [
{
"max_width": null,
"max_height": null,
"url": "//example.com/original-image.png",
"width": 1380,
"height": 1840
},
{
"max_width": 1024,
"max_height": 1024,
"url": "//example.com/optimized-image.png",
"width": 768,
"height": 1024
}
]
```
- Themes can request additional thumbnail sizes by using a modifier in their `about.json` file:
```
"modifiers": {
"topic_thumbnail_sizes": [
[200, 200],
[800, 800]
],
...
```
Remember that these are generated asynchronously, so your theme should include logic to fallback to other available thumbnails if your requested size has not yet been generated
- Two new raw plugin outlets are introduced, to improve the customisability of the topic list. `topic-list-before-columns` and `topic-list-before-link`
* FIX: Perform crop using user-specified image sizes
It used to resize the images to max width and height first and then
perform the crop operation. This is wrong because it ignored the user
specified image sizes from the Markdown.
* DEV: Use real images in test
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
* use image alt as a fallback when there's no title
* update spec
we used to check that the overlay information is added when the image has a titie. This adds 2 more scenarios. One where an image has both a title and an alt, in which case the title should be used and alt ignored.
The other is when there's only an alt, it should then be used to generate the overlay
Penar Musaraj
Bianca Nenciu
David Taylor
Dan Ungureanu
Jarek Radosz
Roman Rizzi
Krzysztof Kotlarek
Guo Xiang Tan
Robin Ward
Régis Hanol
Sam Saffron
Martin Brennan
Joffrey JAFFEUX
Vinoth Kannan
Mark VanLandingham
dependabot-preview[bot]
Joe
Arpit Jalan
Osama Sayegh
Guo Xiang Tan