Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
This reverts commit 7fc7090. And fixed the spec test fails.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
* DEV: Add framework for filtered plugin registers
Plugins often need to add values to a list, and we need to filter those lists at runtime to ignore values from disabled plugins. This commit provides a re-usable way to do that, which should make it easier to add new registers in future, and also reduce repeated code.
Follow-up commits will migrate existing registers to use this new system
* DEV: Migrate user and group custom field APIs to plugin registry
This gives us a consistent system for checking plugin enabled state, so we are repeating less logic. API changes are backwards compatible
This commit ensures that an error is thrown when a user fails to be
removed from a group instead of silently failing.
This means when using the api you will receive a 400 instead of a 200 if
there is a failure. The remove group endpoint allows the removal of
multiple users, this change means that if you try to delete 10 users,
but 1 of them fails you will receive a 400 instead of 200 even though
the other 9 were removed successfully. Rather than adding a bunch more
complexity I think this is more than adequate for most use cases.
FIX: raised a proper NotFound exception when filtering groups by username with invalid username.
FIX: properly filter the groups based on current user visibility when viewing another user's groups.
DEV: Guardian.can_see_group?(group) is now using Guardian.can_see_groups(groups) instead of duplicating the same code.
FIX: spec for groups_controller#index when group directory is disabled for logged in user.
FIX: groups_controller.sortable specs to actually test all sorting combinations.
DEV: s/response_body/body/g for slightly shorter spec code.
FIX: rewrote the "view another user's groups" specs to test all group_visibility and members_group_visibility combinations.
DEV: Various refactoring for cleaner and more consistent code.
I was playing with groups locally and saw this line. I suspect this method isn't needed at all because I don't see any reference to it anywhere in the code, and as far as I know ActiveRecord objects don't have an `id!` method so if this method is called dynamically somewhere it's most likely failing.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
Previously we relied on side effects to set tracking state correctly
when inviting groups to messages
Also has a minor optimisation in that we use pluck instead of pulling in
full record
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
Context: https://meta.discourse.org/t/121589
This new setting option lets group owners message/mention large groups
without granting that privilege to all members.
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
* Expose a new plugin outlet. Pass group model to the group-member-dropdown so it can be accessed by plugins
* Added controller tests for group custom fields. update custom fields when updating a group
Minor fixes to add Rails 6 support to Discourse, we now will boot
with RAILS_MASTER=1, all specs pass
Only one tiny deprecation left
Largest change was the way ActiveModel:Errors changed interface a
bit but there is a simple backwards compat way of working it
Martin Brennan
Vinoth Kannan
Robin Ward
Bianca Nenciu
Vinoth Kannan
Guo Xiang Tan
Gerhard Schlager
Neil Lalonde
Mark VanLandingham
Arpit Jalan
Dan Ungureanu
Osama Sayegh
Sam Saffron
David Taylor
Kane York
Blake Erickson
Régis Hanol
Krzysztof Kotlarek
Joffrey JAFFEUX
Roman Rizzi
Penar Musaraj
Maja Komel