Anonymous users are "shadow" users created when an existing real user desires to post anonymously. This feature is off by default, but it can be enabled via the `allow_anonymous_posting` site setting. Those shadow users shouldn't be included in the users directory (`/u`).
In 14cf8eacf1, we added the
`user_search_similar_results` site setting which when enabled will use
trigram matching for similarity search in `UserSearch`. However, we
noted that adding the `index_users_on_username_lower_trgm` index is
causing the PG planner to not use the `index_users_on_username_lower`
index when the `=` operator is used against the `username_lower` column.
Based on the PG mailing list discussion where support for the `=`
operator in gist_trgm_ops was being considered, it stated that "I also have checked that btree_gist is preferred over pg_trgm gist
index for equality search." This is however quite different from reality
on our own PG clusters where the btree index is not preferred leading to
significantly slower queries when the `=` operator is used.
Since the pg_trgm gist index is only used for queries when the `user_search_similar_results` site setting
is enabled, we decided to drop the feature instead as it is hidden and
disabled by default. As such, we can consider it experiemental and drop
it without deprecation.
PG mailing list discussiong: https://www.postgresql.org/message-id/CAPpHfducQ0U8noyb2L3VChsyBMsc5V2Ej2whmEuxmAgHa2jVXg%40mail.gmail.com
Followup 0323b366f3
This was happening because another spec was adding a
report using the plugin API, but there was nothing
resetting that, so later in the reports controller
when we did Report.singleton_methods, we ended up
with another report with no translation, causing another
error.
Currently, when the custom flag has the same name as the system flag (which is disabled) then it is not displayed. To fix the problem, `custom_` prefix as `name_key` is used to distinguish between the system and the custom flag.
I considered writing a migration to fix existing custom flags name key. However, at the end of migration I would need to run rails code to reset cache `Flag.reset_flag_settings!`. I decided to skip that step as it is a very edge case. If someone has the same flag name as the system flag, then all they have to do is edit the flag and click save.
In addition, I made 2 small fixes:
- edit flag title was missing translation;
- flag form UI was not showing that description is the required field.
This commit adds a new `about_page_hidden_groups` setting to exclude members of specific groups from the admin and moderator lists on the /about page.
Internal topic: t/137717.
### UI changes
All of the UI changes described are gated behind the `use_legacy_pageviews`
site setting.
This commit changes the admin dashboard pageviews report to
use the "Consolidated Pageviews with Browser Detection" report
introduced in 2f2da72747 with
the following changes:
* The report name is changed to "Site traffic"
* The pageview count on the dashboard is counting only using the new method
* The old "Consolidated Pageviews" report is renamed as "Consolidated Legacy Pageviews"
* By default "known crawlers" and "other" sources of pageviews are hidden on the report
When `use_legacy_pageviews` is `true`, we do not show or allow running
the "Site traffic" report for admins. When `use_legacy_pageviews` is `false`,
we do not show or allow running the following legacy reports:
* consolidated_page_views
* consolidated_page_views_browser_detection
* page_view_anon_reqs
* page_view_logged_in_reqs
### Historical data changes
Also part of this change is that, since we introduced our new "Consolidated
Pageviews with Browser Detection" report, some admins are confused at either:
* The lack of data before a certain date , which didn’t exist before
we started collecting it
* Comparing this and the current "Consolidated Pageviews" report data,
which rolls up "Other Pageviews" into "Anonymous Browser" and so it
appears inaccurate
All pageview data in the new report before the date where the _first_
anon or logged in browser pageview was recorded is now hidden.
* FEATURE: Log tag group changes in staff action log
This commit records every change (add, change, delete) to a tag group in
the staff action log.
It uses a modal that was originally called ThemeChangeModal to display
changes, allowing staffs to see the specific changes clearly. The modal
is renamed to StaffActionLogChangeModal in this PR.
ref: https://meta.discourse.org/t/-/325011/14
Co-authored-by: Keegan George <kgeorge13@gmail.com>
Currently, categories support designating only 1 group as a moderation group on the category. This commit removes the one group limitation and makes it possible to designate multiple groups as mods on a category.
Internal topic: t/124648.
This commit introduces a new hidden site setting: `group_pm_user_limit`, default to `1000` which will raise an error when attempting to create a PM target a large group.
TagUser.rb is used to set user notification levels for a tag, we don't have a unique index on the notification level itself. This means that there might be some weird case where a user may have multiple of the same notification level on a tag.
This PR adds a migration which de-duplicates this based on defaults, where we keep the earliest record in the event there is multiple notification level per-user-per-tag.
* add data migration to keep only unexpired or most recently expired user password
* refactor to 1:1 relationship between User and UserPassword
* add migration to remove redundant indexes on user passwords
A new setting attribute is used to define the areas (separated by `|`).
In addition, endpoint `/admin/config/site_settings.json` accepts new `filter_area` data.
This change introduces a new thread notification level allowing users to get notified when someone replies to the thread.
Users who watch a thread will get a green notification on the chat icon and a user notification (blue). User notifications are consolidated based on thread id to prevent cluttering the original users notification area.
---------
Co-authored-by: Régis Hanol <regis@hanol.fr>
* Do not delete created external upload stubs for 2 days
instead of 1 hour if enable_upload_debug_mode is true,
this aids with server-side debugging.
* If using an API call, return the detailed error message
if enable_upload_debug_mode is true. In this case the user
is not using the UI, so a more detailed message is appropriate.
* Add a prefix to log messages in ExternalUploadHelpers, to
make it easier to find these in logster.
Prior to this fix we were calling `fetch_stats` which is never checking if we have a cache entry. This call is making a lot of SQL calls, so it's better to use the cache.
The `notifications.id` has been migrated to bigint in previous commit
799a45a291. This commit migrates one of
the related columns, `user_badges.notification_id`, to `bigint`.
Follow-up to e3ae57ea7a
The previous commit added an `after_create` callback that triggers a refresh for the user directory whenever a `User` record is created. Theoretically, this approach should work, however, there's a gotcha in practice, because during a real user registration, when the `User` record is created in the database, it's not marked as active until the user verifies their email address and the user directory excludes inactive users, so the initial directory refresh triggered by the `after_create` callback becomes pointless.
To make a new user appear in the user directory immediately after sign up, we need to trigger a refresh via an `after_save` callback when they verify their email address and become active.
Prior this fix a topic created in the future could generate this exception:
```
Job exception: ERROR: a negative number raised to a non-integer power yields a complex result
```
This fix and spec should ensure we don't consider topics in the future as the rest of the `update_scores` function is doing at other places.
This check was checking the wrong scope, causing problems in certain edge conditions, for example:
1. Admin adds an "on signup" field that isn't editable after signup.
2. Admin adds a "for all users" field.
3. User goes and fills up the "for all users" field from 2.
4. User is now stuck on the required fields page without any fields showing.
With this change, we only consider "for all users" fields when asking if required custom fields are filled in.
The `notifications.id` column is the most probable column to run out of
values. This is because it is an `int` column that has only 2147483647
values and many notifications are generated on a regular basis in an
active community. This commit migrates the column to `bigint`.
These migrations do not use `ALTER TABLE ... COLUMN ... TYPE` in order
to avoid the `ACCESS EXCLUSIVE` lock on the entire table. Instead, they
create a new `bigint` column, copy the values to the new column and
then sets the new column as primary key.
Related columns (see `user_badges`, `shelved_notifications`) will
be migrated in a follow-up commit.
Followup 76c56c8284
The change introduced above made it so the expired
bookmark reminders were cleared when using the bulk
action menu for bookmarks. However this also affected
clearing reminders for bookmarks when sending notifications.
When clearing bookmark reminders after sending notifications,
we take into account the auto delete preference:
* never - The bookmark `reminder_at` date should not be cleared,
and the bookmark is kept.
* clear_reminder - The bookmark `reminder_at` date is cleared and
the bookmark is kept
The `never` option made it so "expired" bookmark reminder show
on the user's bookmark list.
This commit fixes the change from the other commit and only
forces clearing of `reminder_at` if using the bookmark bulk
action service.
This commit moves the business logic in the `Admin::UsersController#suspend` and `Admin::UsersController#silence` actions to dedicated service classes. There's no functional changes in this commit.
Internal topic: t/130014.
This commit implements 2 new metrics/stats in the /about page for the _estimated_ numbers of unique visitors from the EU and the rest of the world. This new feature is currently off by default, but it can be enabled by turning on the hidden `display_eu_visitor_stats` site settings via the rails console.
There are a number of assumptions that we're making here in order to estimate the number of unique visitors, specifically:
1. we're assuming that the average of page views per anonymous visitor is similar to the average number of page views that a logged-in visitor makes, and
2. we're assuming that the ratio of logged in visitors from the EU is similar to the ratio of anonymous visitors from the EU
Discourse keeps track of the number of both logged-in and anonymous page views, and also the number of unique logged-in visitors and where they're from. So with those numbers and the assumptions above, we can estimate the number of unique anonymous visitors from the EU and the rest of the world.
Internal topic: t/128480.
We need a way to disable certain checks programatically, e.g. on Discourse hosting. This PR adds a configuration option for this, and makes it so that disabled checks aren't run as part of #run_all.
This commit fixes a bug where the silence button is incorrectly displayed on the admin page of a staff user. It's not actually possible to silence a staff user because the backend correctly prevents it, but the frontend isn't checking if the button should be displayed.
Another small bug that this commit fixes is the similar users list not showing up inside the silence/suspend modals due to also a bug in the frontend.
I've also changed the way similar users are loaded so that they're not returned by the `admin/users#show` endpoint anymore and moved them into a new endpoint that the penalize modals (suspend and silence) can call directly to retrieve the list of users. This is done because the similar users list is never shown on the admin user page (`/admin/users/:user_id/:username`); they're only needed when the suspend or silence modals are opened.
Internal topic: t/130014.
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
Adds a new statistics (hidden from the UI, but available via the API) that tracks daily participating users.
A user is considered as "participating" if they have
- Reacted to a post
- Replied to a topic
- Created a new topic
- Created a new PM
- Sent a chat message
- Reacted to a chat message
Internal ref - t/131013
Currently to handle stub topics after merging, there are only options to (1) never delete a stub topic and (2) delete a stub topic after X amount of days. This adds the option to immediately delete a stub topic upon merge.
---------
Co-authored-by: Mark VanLandingham <markvanlan@gmail.com>
Co-authored-by: Renato Atilio <renato@discourse.org>
This commit continues on work laid out by 6039b513fe to redesign the /about page. In this commit, we add the site age and a section on the right hand side to show site activities/statistics such as topics, posts, sign-ups, likes etc.
Following a recent refactor, some methods from `FlagSettings` have been
renamed (`custom_types` -> `additional_message_types`). The
`PostActionType` model was using `custom_types` but when the renaming
was done, it was renamed to `with_additional_message` instead of
`additional_message_types`, which under the right circumstances will
raise an error.
Admin can create up to 50 custom flags. It is limited for performance reasons.
When the limit is reached "Add button" is disabled and backend is protected by guardian.
Osama Sayegh
Alan Guo Xiang Tan
Joffrey JAFFEUX
Martin Brennan
Krzysztof Kotlarek
Keegan George
Guhyoun Nam
Linca
Ted Johansson
Natalie Tay
Kelv
David Battersby
Bianca Nenciu
Régis Hanol
Loïc Guitaut
Isaac Janzen
Penar Musaraj
carson chang