We have all these calls to Group.refresh_automatic_groups! littered throughout the tests. Including tests that are seemingly unrelated to groups. This is because automatic group memberships aren't fabricated when making a vanilla user. There are two places where you'd want to use this:
You have fabricated a user that needs a certain trust level (which is now based on group membership.)
You need the system user to have a certain trust level.
In the first case, we can pass refresh_auto_groups: true to the fabricator instead. This is a more lightweight operation that only considers a single user, instead of all users in all groups.
The second case is no longer a thing after #25400.
We want to exclude the system user from group user counts, since intuitively admins wouldn't include them.
Originally this was accomplished by booting said system user from the groups, but this is causing problems, because the system user needs TL group membership to perform certain tasks.
After this PR, system user is still in the TL groups, but excluded when refreshing the user count.
Some preparatory refactoring as we're working on TL groups for the system user. On User we have a scope #human_users to exclude the system user, DiscoBot, etc. This PR adds the same scope (delegated to User) on Group.
* FIX: respect creation date when paginating group activity posts
There are scenarios where the chronological order of posts doesn't match the order of their IDs. For instance, when moving the first post from one topic or PM to another, a new post (with a higher ID) will be created, but it will retain the original creation time.
This PR changes the group activity page and endpoint to paginate posts using created_at instead of relying on ID ordering.
When setting an old TL based site setting in the console e.g.:
SiteSetting.min_trust_level_to_allow_ignore = TrustLevel[3]
We will silently convert this to the corresponding Group::AUTO_GROUP. And vice-versa, when we read the value on the old setting, we will automatically get the lowest trust level corresponding to the lowest auto group for the new setting in the database.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
Currently, groups owned by moderators are not visible to them on the
groups page. This happens because, the group visibility queries don't
account for non-admin staff user group ownership.
This change updates the group visibility scope queries to account for a
moderator(non-admin staff user) group ownership.
This patch sets some limits on custom fields:
- an entity can’t have more than 100 custom fields defined on it
- a custom field can’t hold a value greater than 10,000,000 characters
The current implementation of custom fields is relatively complex and
does an upsert in SQL at some point, thus preventing to simply add an
`ActiveRecord` validation on the custom field model without having to
rewrite a part of the existing logic.
That’s one of the reasons this patch is implementing validations in the
`HasCustomField` module adding them to the model including the module.
Comparing arrays without an explicit order or sort is usually a bad idea and leads to flakiness. It also replaces `#sort` calls in a couple of specs with array specific matchers like `contain_exactly` and `match_array`.
In addition to that it switches the arguments of some expectations around, because it should be `expect(actual).to eq(expected)` instead of `expect(expected).to eq(actual)`
This fixes a bug in the create invite API where if you passed in an
integer for the group_ids field it would fail to add the user to the
specified group.
Our @mention user search prioritized users based on prefix matches.
So if searching for `sa` we will display `sam`, `asam` in that order
Previously, we did not prioritize group matches based on prefix. This change ensures better parity.
Implementation notes:
1. User search only prioritizes based on username prefix, not name prefix. TBD if we want to change that.
2. @mention on client side will show 0 group matches if we fill up all the spots with user matches. TBD if we want to unconditionally show the first / second group match.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
It's very easy to forget to add `require 'rails_helper'` at the top of every core/plugin spec file, and omissions can cause some very confusing/sporadic errors.
By setting this flag in `.rspec`, we can remove the need for `require 'rails_helper'` entirely.
This commit allows group SMTP emails to be sent with a
different from email address that has been set up as an
alias in the email provider. Emails from the alias will
be grouped correctly using Message-IDs in the mail client,
and replies to the alias go into the correct group inbox.
Group flair is not removed while removing a user from the group since the `before_save` callback methods are not triggered while using the `update_columns` method.
We renamed the site setting for this long ago, but there
were a few places left in the code base where "ninja edit"
needed to be turned into "grace period". Doing this here
to avoid combatative language.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
This overhauls the user interface for the group email settings management, aiming to make it a lot easier to test the settings entered and confirm they are correct before proceeding. We do this by forcing the user to test the settings before they can be saved to the database. It also includes some quality of life improvements around setting up IMAP and SMTP for our first supported provider, GMail. This PR does not remove the old group email config, that will come in a subsequent PR. This is related to https://meta.discourse.org/t/imap-support-for-group-inboxes/160588 so read that if you would like more backstory.
### UI
Both site settings of `enable_imap` and `enable_smtp` must be true to test this. You must enable SMTP first to enable IMAP.
You can prefill the SMTP settings with GMail configuration. To proceed with saving these settings you must test them, which is handled by the EmailSettingsValidator.
If there is an issue with the configuration or credentials a meaningful error message should be shown.
IMAP settings must also be validated when IMAP is enabled, before saving.
When saving IMAP, we fetch the mailboxes for that account and populate them. This mailbox must be selected and saved for IMAP to work (the feature acts as though it is disabled until the mailbox is selected and saved):
### Database & Backend
This adds several columns to the Groups table. The purpose of this change is to make it much more explicit that SMTP/IMAP is enabled for a group, rather than relying on settings not being null. Also included is an UPDATE query to backfill these columns. These columns are automatically filled when updating the group.
For GMail, we now filter the mailboxes returned. This is so users cannot use a mailbox like Sent or Trash for syncing, which would generally be disastrous.
There is a new group endpoint for testing email settings. This may be useful in the future for other places in our UI, at which point it can be extracted to a more generic endpoint or module to be included.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
This reverts commit 7fc7090. And fixed the spec test fails.
Currently, if a group's visibility is set to "Group owners, members" then the mods can't view those group pages. The same rule is applied for members visibility setting too.
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
* Fixed an issue I introduced in the last PR where I am just archiving everything regardless of whether it is actually archived in Discourse man_facepalming
* Refactor group list_mailboxes IMAP code to use providers, add specs, and add provider code to get the correct prodivder
* DEV: Replace User.unstage and User#unstage API with User#unstage!
Quoting @SamSaffron:
> User.unstage mixes concerns of both unstaging users and updating params which is fragile/surprising.
> u.unstage destroys notifications and raises a user_unstaged event prior to the user becoming unstaged and the user object being saved.
User#unstage! no longer updates user attributes and saves the object before triggering the `user_unstaged` event.
* Update one more spec
* Assign attributes after unstaging
Ted Johansson
Renato Atilio
Martin Brennan
Daniel Waterworth
Natalie Tay
Loïc Guitaut
Selase Krakani
Gerhard Schlager
Blake Erickson
Mark VanLandingham
Sam
David Taylor
Phil Pirozhkov
Roman Rizzi
Martin Brennan
Jarek Radosz
Vinoth Kannan
Krzysztof Kotlarek
Arpit Jalan
Joffrey JAFFEUX
Guo Xiang Tan
Neil Lalonde
Gerhard Schlager
Vinoth Kannan