We added this constraint in 5bd55acf83
but it is causing problems in hosted sites and is catching the
issue too far down the line. This commit removes the constraint
for now, and also fixes an issue found with PostDestroyer
which wasn't using the UserStatCountUpdater when updating post_count
and thus was causing negative numbers to occur.
Whenever we got a bounced email in the Email::Receiver we
previously would just set bounced: true on the EmailLog and
discard the status/diagnostic code. This commit changes this
flow to store the bounce error code (defined in the RFC at
https://www.iana.org/assignments/smtp-enhanced-status-codes/smtp-enhanced-status-codes.xhtml)
not just in the Email::Receiver, but also via webhook events
from other mail services and from SNS.
This commit does not surface the bounce error in the UI,
we can do that later if necessary.
Without this parameter, requests for sourcemaps on shared-CDN multisites will not be routed to the correct database, resulting in a 404.
The stylesheet content now depends on the site hostname, so the hostname has been added to the digest.
When a site has secure media enabled and a post is with secure
media, we were incorrectly cooking custom emoji URLs and using the
secure URL for those emojis, even though they should not be
considered secure (their corresponding upload records in the
database are _not_ secure). Now instead of the blanket
post.with_secure_media? boolean for the secure: param, we also
want to make sure the image whose URL is being cooked is also
_not_ a custom emoji.
This is intended for use by plugins which are building their own
topic lists, and want to include PMs alongside regular topics (e.g.
discourse-assign). It does not get used directly in core.
Breakdown of fixes in this commit:
* `UserStat#topic_count` was not updated when visibility of
the topic changed.
* `UserStat#post_count` was not updated when post was hidden or
unhidden.
* `TopicConverter` was only incrementing or decrementing the counts by 1
even if a user has multiple posts in the topic.
* The commit turns off the verbose logging by default as it is just
noise to normal users who are not debugging this problem.
Allows to write custom code blocks:
```
```mermaid height=200,foo=bar
test
```
```
Which will then get converted to:
```
<pre data-code-wrap="mermaid" data-code-height="200" data-code-foo="bar">
<code class="lang-nohighlight">
test
</code>
</pre>
```
This commits adds a new advance_draft to PostCreator that controls if
the draft sequence will be advanced or not. If the draft sequence is
advanced then the old drafts will be cleared. This used to happen for
posts created by plugins or through the API and cleared user drafts
by mistake.
* FEATURE: Add external_id to topics
This commit allows for topics to be created and fetched by an
external_id. These changes are API only for now as there aren't any
front changes.
* add annotations
* add external_id to this spec
* Several PR feedback changes
- Add guardian to find topic
- 403 is returned for not found as well now
- add `include_external_id?`
- external_id is now case insensitive
- added test for posts_controller
- added test for topic creator
- created constant for max length
- check that it redirects to the correct path
- restrain external id in routes file
* remove puts
* fix tests
* only check for external_id in webhook if exists
* Update index to exclude external_id if null
* annotate
* Update app/controllers/topics_controller.rb
We need to check whether the topic is present first before passing it to the guardian.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
* Apply suggestions from code review
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
Ensures that `UserStat#post_count` and `UserStat#topic_count` does not
go below 0. When it does like it did now, we tend to have bugs in our
code since we're usually coding with the assumption that the count isn't
negative.
In order to support the constraints, our post and topic fabricators in
tests will now automatically increment the count for the respective
user's `UserStat` as well. We have to do this because our fabricators
bypasss `PostCreator` which holds the responsibility of updating `UserStat#post_count` and
`UserStat#topic_count`.
* Chinese segmenetation will continue to rely on cppjieba
* Japanese segmentation will use our port of TinySegmenter
* Korean currently does not rely on segmentation which was dropped in c677877e4f
* SiteSetting.search_tokenize_chinese_japanese_korean has been split
into SiteSetting.search_tokenize_chinese and
SiteSetting.search_tokenize_japanese respectively
- Limit bulk re-invite to 1 time per day
- Move bulk invite by csv behind a site setting (hidden by default)
- Bump invite expiry from 30 -> 90 days
## Updates to rate_limiter
When limiting reinvites I found that **staff** are never limited in any way. So I updated the **rate_limiter** model to allow for a few things:
- add an optional param of `staff_limit`, which (when included and passed values, and the user passes `.staff?`) will override the default `max` & `secs` values and apply them to the user.
- in the case you **do** pass values to `staff_limit` but the user **does not** pass `staff?` the standard `max` & `secs` values will be applied to the user.
This should give us enough flexibility to
1. continue to apply a strict rate limit to a standard user
2. but also apply a secondary (less strict) limit to staff
When creating a direct message to a group with group SMTP
set up, and adding another person to that message in the OP,
we send an email to the second person in the OP via the group_smtp
job. This in turn creates an IncomingEmail record to guard against
IMAP double sync.
The issue with this was that this IncomingEmail (which is essentialy
a placeholder/dummy one) was having its Message-ID used as the canonical
References Message-ID for subsequent emails sent out to user_private_message
recipients (such as members of the group), causing threading issues in
the mail client. The canonical <topic/ID@HOST> format should be used
instead for these cases.
This commit fixes the issue by only using the IncomingEmail for the
OP's Message-ID if the OP was created via our handle_mail email receiver
pipeline. It does not make sense to use it in other cases.
In an earlier PR, we decided that we only want to block a domain if
the blocked domain in the SiteSetting is the final destination (/t/59305). That
PR used `FinalDestination#get`. `resolve` however is used several places
but blocks domains along the redirect chain when certain options are provided.
This commit changes the default options for `resolve` to not do that. Existing
users of `FinalDestination#resolve` are
- `Oneboxer#external_onebox`
- our onebox helper `fetch_html_doc`, which is used in amazon, standard embed
and youtube
- these folks already go through `Oneboxer#external_onebox` which already
blocks correctly
If a model class calls preload_custom_fields twice then
we have to clear this otherwise the fields are cached inside the
already existing proxy and no new ones are added, so when we check
for custom_fields[KEY] an error is likely to occur
Our previous implementation used a simple `blocked_domain_array.include?(hostname)`
so some values were not matching. Additionally, in some configurations like ours, we'd used
"cat.*.dog.com" with the assumption we'd support globbing.
This change implicitly allows globbing by blocking "http://a.b.com" if "b.com" is a blocked
domain but does not actively do anything for "*".
An upcoming change might include frontend validation for values that can be inserted.
This commit extends the options which can be passed to
`PrettyText.markdown` so that which Markdown-it rules and Discourse
Markdown plugins to be used when rendering a text can be customizable.
Currently, this extension is mainly used by plugins.
* File.exists? is deprecated and removed in Ruby 3.2 in favor of
File.exist?
* Dir.exists? is deprecated and removed in Ruby 3.2 in favor of
Dir.exist?
I plan to use this in an upcoming discourse-reactions PR, where I want to like a post without notifying the user, so I can instead create a reaction notification.
Additionally, we decouple the a11y attributes from the icon itself, which will let us extend the widget's icon without losing them.
This allows authenticators to instruct the Auth::Result to override attributes without using the general site settings. This provides an easy migration path for auth plugins which offer their own "overrides email", "overrides username" or "overrides name" settings. With this new api, they can set `overrides_*` on the result object, and the attribute will be overriden regardless of the general site setting.
ManagedAuthenticator is updated to use this new API. Plugins which consume ManagedAuthenticator will instantly take advantage of this change.
The previous default aspect ratio for cropping tall images was a little
too strict and was cutting off images. This new setting should allow for
a larger range of image sizes before cropping them.
As an example, the lookup order for German was:
1. override for de
2. override for en
3. value from de
4. value from en
After this change the lookup order is the same as on the client:
1. override for de
2. value from de
3. override for en
4. value from en
see /t/16381
If a theme name contained a double-quote, this problem could lead to invalid/unexpected HTML in the `<head>`
Note that this is not considered a security issue because themes can only be installed/named by administrators, and themes/administrators already have the ability to run arbitrary javascript.
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Since 3b13f1146b the email threading
in mail clients has been broken, because the random suffix meant
that the References header would always be different for non-group
SMTP email notifications sent out.
This commit fixes the issue by always using the "canonical" topic
reference ID inside the References header in the format:
topic/TOPIC_ID@HOST
Which was the old format. We also add the References header to
notifications sent for the first post arriving, so the threading
works for subsequent emails. The Message-ID header is still random
as per the previous change.
Currently we display pending posts in topics (both for author and staff
members) but the feature is only enabled when there’s an enabled global site
setting related to moderation.
This patch allows to have the same behavior for a site where there’s
nothing enabled globally but where a moderated category exists. So when
browsing a topic of a moderated category, the presence of pending posts
will be checked whereas nothing will happen in a normal category.
Currently the Message-IDs we send out for outbound email
are not unique; for a post they look like:
topic/TOPIC_ID/POST_ID@HOST
And for a topic they look like:
topic/TOPIC_ID@HOST
This commit changes the outbound Message-IDs to also have
a random suffix before the host, so the new format is
like this:
topic/TOPIC_ID/POST_ID.RANDOM_SUFFIX@HOST
Or:
topic/TOPIC_ID.RANDOM_SUFFIX@HOST
This should help with email deliverability. This change
is backwards-compatible, the old Message-ID format will
still be recognized in the mail receiver flow, so people
will still be able to reply using Message-IDs, In-Reply-To,
and References headers that have already been sent.
This commit also refactors Message-ID related logic
to a central location, and adds judicious amounts of
tests and documentation.
Martin Brennan
David Taylor
Krzysztof Kotlarek
Bianca Nenciu
Alan Guo Xiang Tan
Ayke Halder
Joffrey JAFFEUX
Blake Erickson
Jarek Radosz
janzenisaac
Natalie Tay
Martin Brennan
Vinoth Kannan
Peter Zhu
Roman Rizzi
Daniel Waterworth
Andrei Prigorshnev
Gerhard Schlager
Angus McLeod
Loïc Guitaut