It is likely that a new admin user was created as just a regular user
before being promoted to admin so this change will update the sidebar
link records for any users that are promoted to admin. This way if any
of the default side bar categories or tags are restricted to admins
these new admins will have those added to their sidebar as well.
You can easily replicate this issue locally (prior to this fix) by using
`rails admin:create` where it creates a user first, then it is promoted
to admin. This means it would receive the default categories of regular
user, but never receive the ones they should have access to as an admin.
As part of this change I did drop the `!` from
`SidebarSectionLink.insert_all` so that it would add any new records
that were missing, but not throw a unique constraint error trying to add
any existing records.
Follow up to: 1b56a55f50
And: e320bbe513
The previous sidebar default tags and categories implementation did not
allow for a user to configure their sidebar to have no categories or
tags. This commit changes how the defaults are applied. When a user is being created,
we create the SidebarSectionLink records based on the `default_sidebar_categories` and
`default_sidebar_tags` site settings. SidebarSectionLink records are
only created for categories and tags which the user has visibility on at
the point of user creation.
With this change, we're also adding the ability for admins to apply
changes to the `default_sidebar_categories` and `default_sidebar_tags`
site settings historically when changing their site setting. When a new
category/tag has been added to the default, the new category/tag will be
added to the sidebar for all users if the admin elects to apply the changes historically.
Like wise when a tag/category is removed, the tag/category will be
removed from the sidebar for all users if the admin elects to apply the
changes historically.
Internal Ref: /t/73500
Previously, when categories were not muted by default, we were sending message about unmuted topics (topics which user explicitly set notification level to watching)
The same mechanism can be used to fix a bug. When the user was explicitly watching topic, but category was muted, then the user was not informed about new reply.
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
Right now the experimental user menu sorts notifications the same way that the old menu does: unread high-priority notifications are shown first in reverse-chronological order followed by everything else also in reverse-chronological order. However, since the experimental user menu has dedicated tabs for some notification types and each tab displays a badge with the count of unread notifications in the tab, we feel like it makes sense to change how notifications are sorted in the experimental user menu to this:
1. unread high-priority notifications
2. unread regular notifications
3. all read notifications (both high-priority and regular)
4. within each group, notifications are sorted in reverse-chronological order (i.e. newest is shown first).
This new sorting logic applies to all tabs in the experimental user menu, however it doesn't change anything in the old menu. With this change, if a tab in the experimental user menu shows an unread notification badge for a really old notification, it will be surfaced to the top and prevents confusing scenarios where a user sees an unread notification badge on a tab, but the tab doesn't show the unread notification because it's too old to make it to the list.
Internal topic: t72199.
Each new user menu notifications should have their own count. Therefore, we need to include all types to serializer and not only `grouped_unread_high_priority_notifications`
Additional PR will be created for chat and assign plugin, as they will have to switch to `grouped_unread_notifications` as well.
Default sidebar tags for not authenticated users can be defined in admin panel. Otherwise, top 5 categories and tags are taken.
Optionally, if categories are set up in permanent order, then the first 5 categories are taken.
```
1) CurrentUserSerializer#sidebar_category_ids includes visible default sidebar categories
Failure/Error: expect(json[:sidebar_category_ids]).to eq([category.id, category_2.id])
expected: [378, 379]
got: [379, 378]
```
Note that in the Ruby doc it says "The order is preserved from the original array". In this case, we want to preserve the order of the site setting.
Some of the changes in this commit are extracted from https://github.com/discourse/discourse/pull/17379.
The bookmarks tab in the new user menu is different from the other tabs in that it can display a mixture of notifications and bookmarks. When there are unread bookmark reminder notifications, the tab displays all of these notifications at the top and fills the remaining space in the menu with the rest of the bookmarks. The bubble/badge count on the bookmarks tab indicates how many unread bookmark reminder notifications there are.
On the technical aspect, since this commit introduces a new `bookmark-item` component, we've done some refactoring so that all 3 "item" components (`notification-item`, `reviewable-item` and the new `bookmark-item`) inherit from a base component and get identical HTML structure so they all look consistent.
Internal tickets: t70584 and t65045.
Follow-up to ce9eec8606.
I did a last-minute refactoring before merging the commit above where I extracted the Message Bus publish call into a new method, but forgot to delete the publish call after adding a call to the new method.
The previous method for reused the PrettyText logic which applied the
watched word logic, but had the unwanted effect of cooking the text too.
This meant that regular text values were converted to HTML.
Follow up to commit 5a4c35f627.
* FIX: properly validate multiselect user fields on user creation
* Add test cases
* FIX: don't check multiselect user fields for watched words
* Clarifiy/simplify tests
* Roll back apply_watched_words changes
Since this method no longer needs to deal with arrays for now. If/when
we add new user fields which uses them, we can deal with it then.
Currently we only apply watched words of the `Block` type to custom user
fields and user profile fields.
This patch enables all rules to be applied such as `Censor` or
`Replace`.
At some point in the past we decided to rename the 'regular' notification state of topics/categories to 'normal'. However, some UI copy was missed when the initial renaming was done so this commit changes the spots that were missed to the new name.
This reverts commit 94c3bbc2d1.
At this current point in time, we do not have enough data on whether
this centralisation is the trade-offs of coupling features into a single
channel.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
This reverts one of the changes introduced just now in:
27d7b0c6de
I don't think we need this `activated_not_suspended_not_staged` scope
because we can just compose it ourselves via method chaining like
`User.activated.not_suspended.not_staged`.
- Only validate if custom_fields are loaded, so that we don't trigger a db query
- Only validate public user fields, not all custom_fields
This commit also reverts the unrelated spec changes in ba148e08, which were required to work around these issues
Currently we don’t apply watched words to custom user fields nor user
profile fields.
This led to users being able to use blocked words in their bio, location
or some custom user fields.
This patch addresses this issue by adding some validations so it’s not
possible anymore to save the User model or the UserProfile model if they
contain blocked words.
We're adding this column now in preparation for a future commit(s) that will
redesign the avatar/notifications menu. The reason the column is added in a
separate commit is because the redesign changes are going to be complex with a
high risk of getting (temporarily) reverted and if they included a database
migration, they wouldn't revert cleanly/easily.
Internal ticket: t65045.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
Via the API it is possible to create a user with an integer username. So
123 instead of "123". This causes the following 500 error:
```
NoMethodError (undefined method `unicode_normalize' for 1:Integer)
app/models/user.rb:276:in `normalize_username'
```
See: https://meta.discourse.org/t/222281
* FEATURE: upload an avatar option for uploading avatars with selectable avatars
Allow staff or users at or above a trust level to upload avatars even when the site
has selectable avatars enabled.
Everyone can still pick from the list of avatars. The option to upload is shown
below the selectable avatar list.
refactored boolean site setting into an enum with the following values:
disabled: No selectable avatars enabled (default)
everyone: Show selectable avatars, and allow everyone to upload custom avatars
tl1: Show selectable avatars, but require tl1+ and staff to upload custom avatars
tl2: Show selectable avatars, but require tl2+ and staff to upload custom avatars
tl3: Show selectable avatars, but require tl3+ and staff to upload custom avatars
tl4: Show selectable avatars, but require tl4 and staff to upload custom avatars
staff: Show selectable avatars, but only allow staff to upload custom avatars
no_one: Show selectable avatars. No users can upload custom avatars
Co-authored-by: Régis Hanol <regis@hanol.fr>
We validate the *format* of email addresses in many places with a match against
a regex, often with very slightly different syntax.
Adding a separate EmailAddressValidator simplifies the code in a few spots and
feels cleaner.
Deprecated the old location in case someone is using it in a plugin.
No functionality change is in this commit.
Note: the regex used at the moment does not support using address literals, e.g.:
* localpart@[192.168.0.1]
* localpart@[2001:db8::1]
This commit introduces a new site setting "google_oauth2_hd_groups". If enabled, group information will be fetched from Google during authentication, and stored in the Discourse database. These 'associated groups' can be connected to a Discourse group via the "Membership" tab of the group preferences UI.
The majority of the implementation is generic, so we will be able to add support to more authentication methods in the near future.
https://meta.discourse.org/t/managing-group-membership-via-authentication/175950
Currently when a user creates posts that are moderated (for whatever
reason), a popup is displayed saying the post needs approval and the
total number of the user’s pending posts. But then this piece of
information is kind of lost and there is nowhere for the user to know
what are their pending posts or how many there are.
This patch solves this issue by adding a new “Pending” section to the
user’s activity page when there are some pending posts to display. When
there are none, then the “Pending” section isn’t displayed at all.
This commit adds token_hash and scopes columns to email_tokens table.
token_hash is a replacement for the token column to avoid storing email
tokens in plaintext as it can pose a security risk. The new scope column
ensures that email tokens cannot be used to perform a different action
than the one intended.
To sum up, this commit:
* Adds token_hash and scope to email_tokens
* Reuses code that schedules critical_user_email
* Refactors EmailToken.confirm and EmailToken.atomic_confirm methods
* Periodically cleans old, unconfirmed or expired email tokens
Use @here to mention all users that were allowed to topic directly or
through group, who liked topics or read the topic. Only first 10 users
will be notified.
Blake Erickson
Alan Guo Xiang Tan
Krzysztof Kotlarek
Martin Brennan
Loïc Guitaut
Osama Sayegh
Arpit Jalan
Andrei Prigorshnev
Bianca Nenciu
Leonardo Mosquera
David Taylor
Sam
Gerhard Schlager
Dan Ungureanu
Jeff Wong
Michael Brown
Angus McLeod