This PR allows invitations to be used when the DiscourseConnect SSO is enabled for a site (`enable_discourse_connect`) and local logins are disabled. Previously invites could not be accepted with SSO enabled simply because we did not have the code paths to handle that logic.
The invitation methods that are supported include:
* Inviting people to groups via email address
* Inviting people to topics via email address
* Using invitation links generated by the Invite Users UI in the /my/invited/pending route
The flow works like this:
1. User visits an invite URL
2. The normal invitation validations (redemptions/expiry) happen at that point
3. We store the invite key in a secure session
4. The user clicks "Accept Invitation and Continue" (see below)
5. The user is redirected to /session/sso then to the SSO provider URL then back to /session/sso_login
6. We retrieve the invite based on the invite key in secure session. We revalidate the invitation. We show an error to the user if it is not valid. An additional check here for invites with an email specified is to check the SSO email matches the invite email
7. If the invite is OK we create the user via the normal SSO methods
8. We redeem the invite and activate the user. We clear the invite key in secure session.
9. If the invite had a topic we redirect the user there, otherwise we redirect to /
Note that we decided for SSO-based invites the `must_approve_users` site setting is ignored, because the invite is a form of pre-approval, and because regular non-staff users cannot send out email invites or generally invite to the forum in this case.
Also deletes some group invite checks as per https://github.com/discourse/discourse/pull/12353
We override the default replacements rule to no longer replace "(c)", "(p)", and "(p)". Additionally, we merged the custom arrows rule into the replacement function.
* FIX: Be able to handle long file extensions
Some applications have really long file extensions, but if we truncate
them weird behavior ensues.
This commit changes the file extension size from 10 characters to 255
characters instead.
See:
https://meta.discourse.org/t/182824
* Keep truncation at 10, but allow uppercase and dashes
Component SCSS compilation should use the current theme's SCSS color
variables as a fallback before using the default core colors.
This is mostly a backwards-compatibility fix, new themes and components
should use CSS custom properties, which offer better support for on-the-fly
color scheme changes (dark mode support, etc.).
The user mailing list mode continued to be silently enabled and
UserEmail job checked just that ignoring site setting
disable_mailing_list_mode.
An additional migrate was added to set disable_mailing_list_mode
to false if any users enabled the mailing list mode already.
Currently the process of adding a custom image to badge is quite clunky; you have to upload your image to a topic, and then copy the image URL and pasting it in a text field. Besides being clucky, if the topic or post that contains the image is deleted, the image will be garbage-collected in a few days and the badge will lose the image because the application is not that the image is referenced by a badge.
This commit improves that by adding a proper image uploader widget for badge images.
It was used both when inviting from a topic page and when creating
invites with "Send to topic on first login", while it should be used
only in the former case.
Corrects flaky spec
Previously we were only clearing state after our spec ran, leaving possible
edge cases where `Discourse.plugins` had data.
Clean-up source of the plugin leak
1 pop was not enough to clear the plugin, plus make specs a bit more
deliberate
The cluster name can be configured by setting the `DISCOURSE_CLUSTER_NAME` environment variable. If set, you can then call /srv/status with a `?cluster=` parameter. If the cluster does not match, an error will be returned. This is useful if you need a load balancer to be able to verify the identity, as well as the presence, of an application container.
When creating a PM target_usernames has been deprecated for some time
now but the api docs have yet to reflect this.
The api docs now specify to use target_recipients.
See: eef21625c6
When transitioning from a tag topic list e.g. /tag/alerts
to the / route the topic list was not reloaded because the
same preload key was used for both lists (topic_list_latest).
The topic list was only reloaded when clicking on the / route
a second time because then it is forced to reload.
In the topic list adapter, we call `PreloadStore.getAndRemove` to
get the topic lists:
534777f5fd/app/assets/javascripts/discourse/app/adapters/topic-list.js (L34-L41)
Now instead of both / and /tag/alerts sharing the same preload
key of `topic_list_latest`, the tag has a key of `topic_list_tag/alerts/l/latest`
Staff can send a post to the review queue by clicking the "Flag Post" button next to "Take Action...". Clicking it flags the post using the "Notify moderators" score type and hides it. A custom message will be sent to the user.
This is not recommended. But if you have other protections in place for CSRF mitigation, you may wish to disable Discourse's implementation. This site setting is not visible in the UI, and must be changed via the console.
It has been observed that doing a HEAD against an Amazon store URL may result in a 405 error being returned.
Skipping the HEAD request may result in an improved oneboxing experience when requesting these URLs.
Onebox content may only be resolved during the process_post job. Onebox content could change the content of the excerpt, so we need to make sure the excerpt is updated accordingly.
The user and an admin could create multiple email change requests for
the same user. If any of the requests was validated and it became
primary, the other request could not be deleted anymore.
* FEATURE: allow category group moderators to pin/unpin topics
Category group moderators should be able to pin/unpin any topics within a category where they have appropraite category group moderator permissions.
Previously, we blocked search engines in tag pages since they may get marked as a duplicate content.
* DEV: block tag inner pages from search engines crawling.
Prior to this change, we had weights for very_high, high, low and
very_low. This means there were 4 weights to tweak and what weights to
use for `very_high/high` and `very_low/low` pair was hard to explain.
This change makes it such that `very_high` search priority will always
ensure that the posts are ranked at the top while `very_low` search
priority will ensure that the posts are ranked at the very bottom.
* FIX: Do not show expired invites under Pending tab
* DEV: Controller action was renamed in previous commit
* FEATURE: Add 'Expired' tab to invites
* FEATURE: Refresh model after removing expired invites
* FEATURE: Do not immediately add invite to the list
Opening the 'create-invite' modal used to automatically generate an
invite to reserve an invite link. If the user did not save it and
closed the modal, the invite would be destroyed. This operations caused
the invite list to change in the background and confuse users.
* FEATURE: Sort redeemed users by creation time
* UX: Improve show / hide advanced options link
* FIX: Show redeemed users even if invites were trashed
* UX: Change modal title when editing invite
* UX: Remove Get Link button
Users can get it from the edit modal
* FEATURE: Add limit for invite links generated by regular users
* FEATURE: Add option to skip email
* UX: Show better error messages
* FIX: Show "Invited by" even if invite was trashed
Follow up to 1fdfa13a099d8e46edd0c481b3aaaafe40455ced.
* FEATURE: Add button to save without sending email
Follow up to c86379a465f28a3cc64a4a8c939cf32cf2931659.
* DEV: Use a buffer to hold all changed data
* FEATURE: Close modal after save
* FEATURE: Rate limit resend invite email
* FEATURE: Make the save buttons smarter
* FEATURE: Do not always send email even for new invites
The Guardian object memoizes a list of allowed user fields. Normally this is fine because Guardian objects only persist for a single request. However, the WebHook class was memoizing a guardian at the class level. This meant that an app restart was required for changes to be reflected. Plus, the Guardian was being shared across all sites in a multisite instance.
Initializing a guardian is cheap, so we can manage without memoization here.
Mailing list mode can generate significant email volume, especially on sites with a large user base. Disable mailing list mode via site settings by default so sites don't experience an unexpectedly large cost from outgoing email.
The urls that we generate for mobile post notifications don't take into
account the subfolder url if a site happens to have one configured. When
this happens when you tap on a new mobile notification it takes you to
a url that doesn't work because it is missing the subfolder portion.
I honestly think this should be handled in the Post model like we do
with the Topic model. `Post.url` should know how to handle subfolder
installs, but that seemed like a very risky change because there are
lots of other places in the codebase where we tack on the base_path and
I didn't want to risk duplicating it.
I also found a small typo in the topics controller spec.
A missing email when accepting an invite link does not make sense so we
should make it a required param which helps to catch bugs in our test
suite and also prevent potential bugs in our code base when the code
trips on a `nil` email.
The user interface has been reorganized to show email and link invites
in the same screen. Staff has more control over creating and updating
invites. Bulk invite has also been improved with better explanations.
On the server side, many code paths for email and link invites have
been merged to avoid duplicated logic. The API returns better responses
with more appropriate HTTP status codes.