Adds a new column/setting to groups, allow_unknown_sender_topic_replies, which is default false. When enabled, this scenario is allowed via IMAP:
* OP sends an email to the support email address which is synced to a group inbox via IMAP, creating a group topic
* Group user replies to the group topic
* An email notification is sent to the OP of the topic via GroupSMTPMailer
* The OP has several email accounts and the reply is sent to all of them, or they forward their reply to another email account
* The OP replies from a different email address than the OP (gloria@gmail.com instead of gloria@hey.com for example)
* The a new staged user is created, the new reply is accepted and added to the topic, and the staged user is added to the topic allowed users
Without allow_unknown_sender_topic_replies enabled the new reply creates an entirely new topic (because the email address it is sent from is not previously part of the topic email chain).
"I18n.t(key, locale: locale)" fails to find the correct translation in some cases. We should always wrap it with the "I18n.with_locale(locale)" method.
Also, reverting an override wasn't always possible because the serializer always used "I18n.locale" as the locale.
This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
It used to change the category of the topic, instead of the destination
category (topic.category_id instead of topic.shared_draft.category_id).
The shared drafts controls were displayed only if the current category
matched the 'shared drafts category', which was not true for shared
drafts that had their categories changed (affected by the previous bug).
If a group you're a member of is invited to a PM, you can no longer remove yourself from it. This means you won't be able to remove the message from your inbox, and even if you archive it, it'll come back once someone replies.
This is an edge-case of 9fb3629. An admin could set the shared draft category to one where both TL2 and TL3 users have access but only give shared draft access to TL3 users. If something like this happens, we need to make sure that TL2 users won't be able to see them, and they won't be listed on latest.
Before this change, `SharedDrafts` were lazily created when a destination category was selected. We now create it alongside the topic and set the destination to the same shared draft category.
* FEATURE: Allow categroy group moderators to list/unlist topics
If enabled via SiteSettings, a user belonging to a group which has been granted category group moderator privileges should be able to list/unlist topics belonging to the appropraite category.
Being that system badges ship with every instance of Discourse, we've opted to define the name, description, and long description in our locales files to promote translation into other languages. When an admin visited the overview page of a system badge in their admin panel, they were met with disabled inputs for these text properties. The problem is that we failed to educate the admin that the text needs to be managed via the site text customization settings.
This change adds a small "Customize Text" link under theses inputs that takes the admin to the specific site text customization where they can make desired changes.
* FEATURE: Allow Category Group Moderators to edit topic titles
Adds category group moderators to the topic guardian’s `can_edit` method.
The value of `can_edit` is returned by the topic view serializer, and this value determines whether the current user can edit the title/category/tags of the topic directly (which category group moderators could already do by editing the first post of a topic).
Note that the value of `can_edit` is now always returned by the topic view serializer (ie, for both true and false values) to cover the case where a topic is moved out of a category that a category group moderator has permissions on, so that when the topic is reloaded the UI picks up that `can_edit` is now false, and thus the edit icon should no longer be displayed.
* DEV: Add a comment explaining why `can_edit` is always returned
ListableTopicSerializer includes many attributes which we are not using, and is likely to cause N+1s when not used in conjunction with TopicQuery.
Using the BasicTopicSerializer means that no other tables are required.
Themes marked for auto update will be automatically updated when
Discourse is updated. This is triggered by discourse_docker or
docker_manager running Rake task 'themes:update'.
There are issues around displaying images on published pages when secure media is enabled. This PR temporarily makes it appear as if published pages are enabled if secure media is also enabled.
* FEATURE - allow category group moderators to delete topics
* Allow individual posts to be deleted
* DEV - refactor for new `can_moderate_topic?` method
Trying to include this attribute when topic_user is nil causes an error when visiting a topic as anon. Additionally, we don't display the slow mode banner for these users.
Adds a new slow mode for topics that are heating up. Users will have to wait for a period of time before being able to post again.
We store this interval inside the topics table and track the last time a user posted using the last_posted_at datetime in the TopicUser relation.
We are using preload to load tags into topics. When later we try to use `order` or `pluck` it is causing N+1
Usually, topics don't have many tags so sorting using ruby should be reasonably performant.
Groups page was loading fields that are only used on the group show
page, so move those fields to the GroupShowSerializer.
Also only fetch the default category and tag notifications once.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
Moderators should not be able to see `UserSerializer#group_users` and `UserSerializer#second_factor_enabled` of other users.
Impact of leaking this is low because the information leaked is not
exploitable.
This was likely introduced with the refactor to make ColorSchemeColor a database object. Add a test so this doesn't happen again.
Also test other basics of the WizardSerializer.
For some reason, the .as_json left Ruby objects in; I solved this with a round trip through JSON during the test.
Like "default watching" and "default tracking" categories option now the "regular" categories support is added. It will be useful for sites that are muted by default. The user option will be displayed only if `mute_all_categories_by_default` site setting is enabled.
Enabling the moderators_manage_categories_and_groups site setting will allow moderator users to create/manage groups.
* show New Group form to moderators
* Allow moderators to update groups and read logs, where appropriate
* Rename site setting from create -> manage
* improved tests
* Migration should rename old log entries
* Log group changes, even if those changes mean you can no longer see the group
* Slight reshuffle
* RouteTo /g if they no longer have permissions to view group
For sites that are configured to mute some or all categories and tags
for users by default, groups can now be configured to set members'
notification level to normal from the group manage UI.
* FEATURE: set notification levels when added to a group
This feature allows admins and group owners to define default
category and tag tracking levels that will be applied to user
preferences automatically at the time when users are added to the
group. Users are free to change those preferences afterwards.
When removed from a group, the user's notification preferences aren't
changed.
I added delete_when_reminder_sent to ignored_columns because it no longer exists and added a shortcut method delete_when_reminder_sent? to the Bookmark model. However I have been seeing some weird errors like:
> Job exception: unknown attribute 'delete_when_reminder_sent' for Bookmark.
So I am very suspicious. I am just renaming the method to auto_delete_when_reminder_sent? to avoid any potential conflicts.
Also found include_bookmark_delete_on_owner_reply? in PostSerializer which is used for nothing; I must have forgotten to delete it before.
This reverts commit 84de643c04.
Users are using the search endpoint as public API even though it is
meant to be internal. Revert for now while we figure out the path
forward on providing a more stable API to end users.
This adds an option to "delete on owner reply" to bookmarks. If you select this option in the modal, then reply to the topic the bookmark is in, the bookmark will be deleted on reply.
This PR also changes the checkboxes for these additional bookmark options to an Integer column in the DB with a combobox to select the option you want.
The use cases are:
* Sometimes I will bookmark the topics to read it later. In this case we definitely don’t need to keep the bookmark after I replied to it.
* Sometimes I will read the topic in mobile and I will prefer to reply in PC later. Or I may have to do some research before reply. So I will bookmark it for reply later.
* FEATURE: Allow List for PMs
This feature adds a new user setting that is disabled by default that
allows them to specify a list of users that are allowed to send them
private messages. This way they don't have to maintain a large list of
users they don't want to here from and instead just list the people they
know they do want. Staff will still always be able to send messages to
the user.
* Update PR based on feedback
* Added scopes UI
* Create scopes when creating a new API key
* Show scopes on the API key show route
* Apply scopes on API requests
* Extend scopes from plugins
* Add missing scopes. A mapping can be associated with multiple controller actions
* Only send scopes if the use global key option is disabled. Use the discourse plugin registry to add new scopes
* Add not null validations and index for api_key_id
* Annotate model
* DEV: Move default mappings to ApiKeyScope
* Remove unused attribute and improve UI for existing keys
* Support multiple parameters separated by a comma
When creating a bookmark reminder that deletes the bookmark on reminder, if the user clicked on the notification and got taken to the post in the topic the bookmark icon still showed as blue with the reminder clock indicator. This was because the response JSON for reloading a topic post was not including the bookmark attributes, not even the bookmarked boolean.
We now return the correct attributes in the serializer, and if bookmarked is false we clear all the bookmark related attributes on the post for the notification to make sure nothing of the old bookmark remains in the UI.
This was only a problem if the user did not refresh the app completely inbetween setting the reminder and receiving the notification.
When uploading an image as a site setting, we need to return the "raw" URL, otherwise
when saving the site setting, the upload won't be looked up properly.
Follow-up-to: f11363d446
#b19dcac2 improved the serializer so it sends default notification
levels to users to work around cases where a category edit would
would result in clients being left with invalid notification state
Unfortunately this did not address the root issue.
When we edit categories we publish state to multiple users this
means that the serializer is executed unscoped with no user.
The client already handles this case per:
dcad720a4c/app/assets/javascripts/discourse/app/models/site.js (L119-L119)
If a property is not shipped to it, it will leave it alone on the
existing category.
This fix ensures that these wide category info updates do not
include notification state to avoid corruption of local state.
* FEATURE: Don't display muted/ignored users under "who liked"
Previously, if you clicked on the heart icon below a post
it would show you the avatar for a user even if you ignored or muted
them.
This commit will instead display a (?) icon. The count of likes will
remain correct, but you needn't be reminded of the person you
preferred not to see.
* Use a circle instead of (?) for unknown user
There are two problems I'm trying to tackle here.
1. The site json is cached for anonymous users so readonly mode can be
cached for up to 30 minutes which makes it confusing.
2. We've already checked for readonly mode in the controller so having
to check for readonly mode again in `SiteSerializer` is adding an extra
Redis query on every request.
This came in as a request on meta to include the raw field in the post
webhook serializer.
https://meta.discourse.org/t/-/49045/55?u=blake
Including this field can prevent needing to make a 2nd API request to
get the raw field of a post.
It would be handy down the road if we updated the webhook ui to specify
fields or arguments that you wanted to be included in the serialized
data, but most requests I've seen to update the serializers have been
valid requests that are good to add anyways, so I don't think we have
reached that point yet.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
Martin Brennan
Bianca Nenciu
Vinoth Kannan
Roman Rizzi
Mark VanLandingham
Krzysztof Kotlarek
Dan Ungureanu
jbrw
Robin Ward
Penar Musaraj
tshenry
David Taylor
Arpit Jalan
Gerhard Schlager
Neil Lalonde
Guo Xiang Tan
Joshua Rosenfeld
Kane York
Joffrey JAFFEUX
jahan-ggn
Simon Cossar
Blake Erickson
Régis Hanol
Vinoth Kannan
Sam Saffron
Michael Brown