When we call Bookmark.cleanup! we want to make sure that
topic_user.bookmarked is updated for topics linked to the
bookmarks that were deleted. Also when PostDestroyer calls
destroy and recover. We have a job for this already --
SyncTopicUserBookmarked -- so we just utilize that.
Leaking state and non-obvious order (before :all runs *before* RailsHelper.test_setup) are not worth it.
A replacement PR for #13370. Fixes some flaky specs, e.g.
```
bin/rspec './spec/components/freedom_patches/translate_accelerator_spec.rb[1:3]' './spec/jobs/clean_up_user_export_topics_spec.rb[1:1]' --tag ~type:multisite --seed 35994
```
Also included:
* DEV: No need for locale reset (we do it anyway in rails_helper in `test_setup`)
Adds a new `smtp_group_id` column to `EmailLog` which is filled in if the mail `from_address` matches a group's `email_username`. This is for easier debugging, so we know which emails have been sent via group SMTP.
When replying to a user_private_message email originating from
a group PM that does _not_ have a reply key (e.g. when replying
directly to the group's SMTP address), we were mistakenly linking
the new post created from the reply to the OP and the user who
created the topic, based on the first IncomingEmail message ID in
the topic, rather than using the correct reply to user and post number
that the user actually replied to.
We now use the In-Reply-To header to look up the corresponding EmailLog
record when the user who replied was sent a user_private_message email,
and use the post from that as the reply_to_user/post.
This also removes superfluous filtering of incoming_email records. After
already filtering by message_id and then addressed_to_user (which only
returns incoming emails where the to, from, or cc address includes any
of the user's emails), we were filtering again but in the ruby code for
the exact same conditions. After removing this all existing tests still
pass.
This PR changes the `UserNotification` class to send outbound `user_private_message` using the group's SMTP settings, but only if:
* The first allowed_group on the topic has SMTP configured and enabled
* SiteSetting.enable_smtp is true
* The group does not have IMAP enabled, if this is enabled the `GroupSMTPMailer` handles things
The email is sent using the group's `email_username` as both the `from` and `reply-to` address, so when the user replies from their email it will go through the group's SMTP inbox, which needs to have email forwarding set up to send the message on to a location (such as a hosted site email address like meta@discoursemail.com) where it can be POSTed into discourse's handle_mail route.
Also includes a fix to `EmailReceiver#group_incoming_emails_regex` to include the `group.email_username` so the group does not get a staged user created and invited to the topic (which was a problem for IMAP), as well as updating `Group.find_by_email` to find using the `email_username` as well for inbound emails with that as the TO address.
#### Note
This is safe to merge without impacting anyone seriously. If people had SMTP enabled for a group they would have IMAP enabled too currently, and that is a very small amount of users because IMAP is an alpha product, and also because the UserNotification change has a guard to make sure it is not used if IMAP is enabled for the group. The existing IMAP tests work, and I tested this functionality by manually POSTing replies to the SMTP address into my local discourse.
There will probably be more work needed on this, but it needs to be tested further in a real hosted environment to continue.
This improves the display of available tags in categories that are
configured to require at least (x) tags from a tag group.
There are two changes included:
- regular users will now see all the available tags in the required tag
group (previously they could see a max. of 5 tags)
- staff users will now see the tags from the required tag group when
the tag group contains more tags than the default limit (also set to 5)
Both changes only apply to the default query (i.e. no search terms).
It was not clear that replace watched words can be used to replace text
with URLs. This introduces a new watched word type that makes it easier
to understand.
On the web, we display only an excerpt in a monospace font and the rest
of the body is hidden under ellipsis. The email displayed both of them
and it did not use the same style. This commit leaves only the excerpt
in emails and makes it use a monospace font to display it.
Discourse shouldn't dynamically calculate the path of uploads and optimized images after a file has been stored on disk or S3. Otherwise it might calculate the wrong path if the SHA1 or extension stored in the database doesn't match the actual file path.
* Move onebox gem in core library
* Update template file path
* Remove warning for onebox gem caching
* Remove onebox version file
* Remove onebox gem
* Add sanitize gem
* Require onebox library in lazy-yt plugin
* Remove onebox web specific code
This code was used in standalone onebox Sinatra application
* Merge Discourse specific AllowlistedGenericOnebox engine in core
* Fix onebox engine filenames to match class name casing
* Move onebox specs from gem into core
* DEV: Rename `response` helper to `onebox_response`
Fixes a naming collision.
* Require rails_helper
* Don't use `before/after(:all)`
* Whitespace
* Remove fakeweb
* Remove poor unit tests
* DEV: Re-add fakeweb, plugins are using it
* Move onebox helpers
* Stub Instagram API
* FIX: Follow additional redirect status codes (#476)
Don’t throw errors if we encounter 303, 307 or 308 HTTP status codes in responses
* Remove an empty file
* DEV: Update the license file
Using the copy from https://choosealicense.com/licenses/gpl-2.0/#
Hopefully this will enable GitHub to show the license UI?
* DEV: Update embedded copyrights
* DEV: Add Onebox copyright notice
* DEV: Add MIT license, convert COPYRIGHT.txt to md
* DEV: Remove an incorrect copyright claim
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Co-authored-by: jbrw <jamie@goatforce5.org>
This PR improves the UI of bulk select so that its context is applied to the Dismiss Unread and Dismiss New buttons. Regular users (not just staff) are now able to use topic bulk selection on the /new and /unread routes to perform these dismiss actions more selectively.
For Dismiss Unread, there is a new count in the text of the button and in the modal when one or more topic is selected with the bulk select checkboxes.
For Dismiss New, there is a count in the button text, and we have added functionality to the server side to accept an array of topic ids to dismiss new for, instead of always having to dismiss all new, the same as the bulk dismiss unread functionality. To clean things up, the `DismissTopics` service has been rolled into the `TopicsBulkAction` service.
We now also show the top Dismiss/Dismiss New button based on whether the bottom one is in the viewport, not just based on the topic count.
Based on feedback from Matt Haughey, we don't need to use so many words when describing a deleted topic or post.
Co-authored-by: Martin Brennan <martin@discourse.org>
We support two types of custom excerpts. It can be <div class="excerpt"> or <span class="excerpt">: b21f74060e/lib/excerpt_parser.rb (L120)
We also ignore max excerpt length for custom excerpts. But we forgot to process div when ignoring max length.
When uploads are created from the composer (editing or creating a post),
for sites with secure uploads enabled we assume security by default and
that new upload is set to secure. When the post is created, we then
check whether the post uploads _actually_ need to be secure and adjust
accordingly.
We were not doing this when revising a post, so when a new upload was
created when editing a post in a public topic, the secure status stayed
true erroneously causing issues with image previews, among other things.
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
Previously, we only precompiled the CSS for parent themes but not for
the child themes. As a result, the CSS for child themes were being
compiled during the first request which made the respond time high for
that request.
Watched words are always regular expressions, despite watched_words_
_regular_expressions being enabled or not. Internally, wildcard
characters are replaced with a regular expression that matches any non
whitespace character.
* FIX: Hide tag watched words if tagging is disabled
These 'autotag' words were shown even if tagging was disabled.
* FIX: Make autotag watched words case insensitive
This commit also fixes the bug when no tag was applied if no other tag
was already present.
* DEV: Allow wildcards in Oneboxer optional domain Site Settings
Allows a wildcard to be used as a subdomain on Oneboxer-related SiteSettings, e.g.:
- `force_get_hosts`
- `cache_onebox_response_body_domains`
- `force_custom_user_agent_hosts`
* DEV: fix typos
* FIX: Try doing a GET after receiving a 500 error from a HEAD
By default we try to do a `HEAD` requests. If this results in a 500 error response, we should try to do a `GET`
* DEV: `force_get_hosts` should be a hidden setting
* DEV: Oneboxer Strategies
Have an alternative oneboxing ‘strategy’ (i.e., set of options) to use when an attempt to generate a Onebox fails. Keep track of any non-default strategies that were used on a particular host, and use that strategy for that host in the future.
Initially, the alternate strategy (`force_get_and_ua`) forces the FinalDestination step of Oneboxing to do a `GET` rather than `HEAD`, and forces a custom user agent.
* DEV: change stubbed return code
The stubbed status code needs to be a value not recognized by FinalDestination
* FIX: Ensure the same email cannot be invited twice
When creating a new invite with a duplicated email, the old invite will
be updated and returned. When updating an invite with a duplicated email
address, an error will be returned.
* FIX: not Ember helper does not exist
* FIX: Sync can_invite_to_forum? and can_invite_to?
The two methods should perform the same basic set of checks, such as
check must_approve_users site setting.
Ideally, one of the methods would call the other one or be merged and
that will happen in the future.
* FIX: Show invite to group if user is group owner
* FIX: flaky specs after topic view custom filters
When ensuring TopicView class variables return to the original state it should use empty Hash instead of empty Array. That
https://github.com/discourse/discourse/blob/master/lib/topic_view.rb#L60
* FIX: convert to string for topic view custom filter
nil was converted to "" and the matching regex would return [] and then be converted to nil with max usage.
Example exception:
```
NoMethodError (undefined method `<=' for nil:NilClass)
lib/text_sentinel.rb:71:in `seems_unpretentious?'
lib/validators/quality_title_validator.rb:13:in `validate_each'
lib/topic_creator.rb:25:in `valid?'
```
Sometimes, parts of the application pass in the locale as a string, not a symbol. This was causing the translate_accelerator to cache two versions of the locale separately: one cache for the symbol version, and one cache for the string version. For example, in a running production process:
```
irb(main):001:0> I18n.instance_variable_get(:@loaded_locales)
=> [:en, "en"]
```
This commit ensures the `locale` key is always converted to a symbol, and adds a spec to ensure the same locale cannot appear twice in `@loaded_locales`
We really want to encourage all developers to use Ember CLI for local
development and testing. This will display an error page if they are not
with instructions on how to start the local server.
To disable it, you can set `NO_EMBER_CLI=1` as an ENV variable
This setting allows admin to de/activate automatic trimming of incoming email.
There are instances where it does wonders in trimming all the garbage content and other
instances where it's so bad that it trims the most important part of the email.
FIX: don't remove hidden content using the style attribute when converting HTML to Markdown.
The regexp used was doing more harm than good. It was way too broad.
FIX: properly elide signatures from emails sent with Front App.
This is fairly safe as Front App nicely identifies signatures in the HTML part.
For sites with login_required set to true, counting anonymous pageviews is
confusing. Requests to /login and other pages would make it look like
anonymous users have access to site's content.
* DEV: Give a nicer error when `--proxy` argument is missing
* DEV: Improve Ember CLI's bootstrap logic
Instead of having Ember CLI know which URLs to proxy or not, have it try
the URL with a special header `HTTP_X_DISCOURSE_EMBER_CLI`. If present,
and Discourse thinks we should bootstrap the application, it will
instead stop rendering and return a HTTP HEAD with a response header
telling Ember CLI to bootstrap.
In other words, any time Rails would otherwise serve up the HTML for the
Ember app, it stops and says "no, you do it."
* DEV: Support asset filters by path using a new options object
Without this, Ember CLI's bootstrap would not get the assets it wants
because the path it was requesting was different than the browser path.
This adds an optional request header to fix it.
So far this is only used by the styleguide.
Martin Brennan
Jarek Radosz
Penar Musaraj
Neil Lalonde
Dan Ungureanu
David Taylor
Bianca Nenciu
Gerhard Schlager
Arpit Jalan
Roman Rizzi
Jeff Atwood
Daniel Waterworth
Andrei Prigorshnev
Josh Soref
Alan Guo Xiang Tan
jbrw
Krzysztof Kotlarek
Joffrey JAFFEUX
Gerhard Schlager
Robin Ward
Régis Hanol