* Add username and name_or_username variables to SystemMessage defaults
* Allow username and name variables on welcome_user email template overrides
* Satisfy linting
* Add test
16 bit images were not returning the correct dominant color due truncation
The routine expected an 8bit color eg: #FFAA00, but ended up getting a 16bit one eg: #FFFAAA000. This caused a truncation, which leads to wildly off colors.
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
This is the first in a multi-part change to move the custom fields to a new table. It includes:
- Adding a new CategorySetting model and corresponding table.
- Populating it with data from the category_custom_fields table.
Improvements for this PR: https://github.com/discourse/discourse/pull/20057
What was fixed:
- [x] Use ember transitions instead of full reload
- [x] Link was inaccurately kept active
- [x] "+ save" renamed to just "save"
- [x] Render emojis in link name
- [x] UI to set icon
- [x] Delete link is trash icon instead of "x"
- [x] Add another link to on the left and rewording
- [x] Raname "link name" -> "name", "points to" -> link
- [x] Add limits to fields
- [x] Move add section button to the bottom
This PR is a major change to Sass compilation in Discourse.
The new version of sass-ruby moves to dart-sass putting we back on the supported version of Sass. It does so while keeping compatibility with the existing method signatures, so minimal change is needed in Discourse for this change.
This moves us
From:
- sassc 2.0.1 (Feb 2019)
- libsass 3.5.2 (May 2018)
To:
- dart-sass 1.58
This update applies the following breaking changes:
>
> These breaking changes are coming soon or have recently been released:
>
> [Functions are stricter about which units they allow](https://sass-lang.com/documentation/breaking-changes/function-units) beginning in Dart Sass 1.32.0.
>
> [Selectors with invalid combinators are invalid](https://sass-lang.com/documentation/breaking-changes/bogus-combinators) beginning in Dart Sass 1.54.0.
>
> [/ is changing from a division operation to a list separator](https://sass-lang.com/documentation/breaking-changes/slash-div) beginning in Dart Sass 1.33.0.
>
> [Parsing the special syntax of @-moz-document will be invalid](https://sass-lang.com/documentation/breaking-changes/moz-document) beginning in Dart Sass 1.7.2.
>
> [Compound selectors could not be extended](https://sass-lang.com/documentation/breaking-changes/extend-compound) in Dart Sass 1.0.0 and Ruby Sass 4.0.0.
SCSS files have been migrated automatically using `sass-migrator division app/assets/stylesheets/**/*.scss`
We recently had a bug which caused auto-bumping to "not work". The problem was that the value had been set to 0.5, which when coerced to an integer turned into 0. So the feature is "working as intended", but there's a possibility of misconfiguration.
When looking into this, I noticed that the inputs on the category settings page doesn't have any particular sanitisation in the front-end, and also one or two validations missing in the back-end.
This change:
- Takes an existing component, NumberField and enhances that by only allowing numeric input, essentially turning it into a managed input using the same approach as our PasswordField.
- Changes the numeric inputs on category settings page to use this component.
- Adds appropriate min constraints to the fields to disallow out-of-range values.
- Adds missing back-end validations to relevant fields.
* FIX: Remove action buttons if post has already been reviewed
* Change the approve to reject test to expect an error
* Adds a controller spec to ensure you can't edit a non-pending review item
* Remove unnessary conditional
When a CUSTOM_SCHEME is missing a color (e.g. 'Dracula' is missing a 'highlight' color), we need to fallback to `ColorScheme.base_colors`. This regressed in 66256c15bd
Allows users to configure their own custom sidebar sections with links withing Discourse instance. Links can be passed as relative path, for example "/tags" or full URL.
Only path is saved in DB, so when Discourse domain is changed, links will be still valid.
Feature is hidden behind SiteSetting.enable_custom_sidebar_sections. This hidden setting determines the group which members have access to this new feature.
Currently, when doing `@mention` for users we have 0 tolerance for typos and misspellings.
With this patch, if a user search doesn't return enough results we go and use `pg_trgm` features to try and find more matches based on trigrams of usernames and names.
It also introduces GiST indexes on those fields in order to improve performance of this search, going from 130ms down to 15ms in my tests.
This is all gated in a feature flag and can be enabled by running `SiteSetting.user_search_similar_results = true` in the rails console.
`--d-hover` is calculated to be equivalent to primary-100 in light mode, or primary-low in dark mode
`--d-selected` is calculated to be equivalent to primary-low in light mode, or primary-100 in dark mode
`lib/color_math` is introduced to provide some utilities for making these calculations.
The check used to be necessary because we validated the referrer too and
this bypass was a workaround a bug that is present in some browsers that
do not send the correct referrer.
When creating a group membership request, there is no character
limit on the 'reason' field. This can be potentially be used by
an attacker to create enormous amount of data in the database.
Co-authored-by: Ted Johansson <ted@discourse.org>
Currently we don’t have an association between reviewables and posts.
This sometimes leads to inconsistencies in the DB as a post can have
been deleted but an associated reviewable is still present.
This patch addresses this issue simply by adding a new association to
the `Post` model and by using the `dependent: :destroy` option.
When EmbeddableHost is configured for a specific category and that category is deleted, then EmbeddableHost should be deleted as well.
In addition, migration was added to fix existing data.
Currently, `Tag#topic_count` is a count of all regular topics regardless of whether the topic is in a read restricted category or not. As a result, any users can technically poll a sensitive tag to determine if a new topic is created in a category which the user has not excess to. We classify this as a minor leak in sensitive information.
The following changes are introduced in this commit:
1. Introduce `Tag#public_topic_count` which only count topics which have been tagged with a given tag in public categories.
2. Rename `Tag#topic_count` to `Tag#staff_topic_count` which counts the same way as `Tag#topic_count`. In other words, it counts all topics tagged with a given tag regardless of the category the topic is in. The rename is also done so that we indicate that this column contains sensitive information.
3. Change all previous spots which relied on `Topic#topic_count` to rely on `Tag.topic_column_count(guardian)` which will return the right "topic count" column to use based on the current scope.
4. Introduce `SiteSetting.include_secure_categories_in_tag_counts` site setting to allow site administrators to always display the tag topics count using `Tag#staff_topic_count` instead.
The `enable_new_notifications_menu` site setting allows sites that have
`navigation_menu` set to `legacy` to use the redesigned notifications
menu before switching to the new sidebar navigation menu.
0403cda1d1 introduced a regression where
topics in non read-restricted categories have its TopicTrackingState
MessageBus messages published with the `group_ids: [nil]` option. This
essentially means that no one would be able to view the message.
When a topic belongs to category that is read restricted but permission
has not been granted to any groups, publishing ceratin topic tracking state
updates for the topic will result in the `MessageBus::InvalidMessageTarget` error being raised
because we're passing `nil` to `group_ids` which is not support by
MessageBus.
This commit ensures that for said category above, we will publish the
updates to the admin groups.
If unaccent is called with quote-like Unicode characters then it can
generate invalid queries because some of the transformed quotes by
unaccent are not escaped and to_tsquery fails because of bad input.
This commits replaces more quote-like Unicode characters before
unaccent is called.
This change adds `target` to the set of attributes allowed by the
HTML sanitizer which is applied to the description of a user_field.
The rationale for this change:
* If one puts a link (<a>...</a>) in the description of a user_field
that is present and/or required at sign-up, the expectation is that
a prospective new user will click on that link during sign-up.
* Without an appropriate `target` attribute on the link, the new page
will be loaded in the same window/tab as the sign-up form, but this
will obliterate any fields that the user had already filled-out on
the form. (E.g., hitting the back-button will return to an
empty form.)
* Such UX behavior is incredibly aggravating to new users.
This change allows an admin to add a `target` attribute to links, to
instruct the browser to open them in a different window/tab, leaving
a sign-up form intact.
We previously used post creator's guardian permissions which will raise an error if the reviewer added a staff-only (restricted) tag.
Co-authored-by: Natalie Tay <natalie.tay@discourse.org>
Using a shared channel means that every user receives an update to the 'last_id' when *any* other user is logged out. If many users are being programmatically logged out at the same time, this can cause a very large number of message-bus polls.
This commit switches to use a user-specific channel, which means that each user has its own 'last id' which will only increment when they are logged out
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
FEATURE: Chat and Sidebar are now on by default
- Set the sidebar site setting to be enabled by default
- Set the chat site setting to be enabled by default
- Updated existing specs that assumed the original default
- Use a migration to keep old defaults for existing sites
This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
When finding the candidates for `Topic.similar_to`, we will now ignore
topics in categories where `Category#search_priority` has been set to
ignore and also topics in categories which the user has specifically
muted.
Internal Ref: /t/87132
When a screened IP address is matched because it is either blocked or
allowed it should update match_count. This did not work because it
tried to validate the IP address and it failed as it matched with
itself.
Previously we would trigger the event before the `Topic#deleted_at`
column has been updated making it hard for plugins to correctly work
with the model when its new state has not been persisted in the
database.
* FIX: Only modify secured sidebar links on user promotion/demotion
If a user is created populate their sidebar with the default
categories/tags that they have access to.
If a user is promoted to admin populate any new categories/tags that
they now have access to.
If an admin is demoted remove any categories/tags that they no longer
have access to.
This will only apply for "secured" categories. For example if these are
the default sitebar categories:
- general
- site feedback
- staff
and a user only has these sidebar categories:
- general
when they are promoted to admin they will only receive the "staff"
category. As this is a default category they didn't previously have
access to.
* Add spec, remove tag logic on update
Change it so that if a user becomes unstaged it used the "add" method
instead of the "update" method because it is essentially following the
on_create path.
On admin promotion/demotion remove the logic for updating sidebar tags because
we don't currently have the tag equivalent like we do for User.secure_categories.
Added the test case for when a user is promoted to admin it should
receive *only* the new sidebar categories they didn't previously have
access to. Same for admin demotion.
* Add spec for suppress_secured_categories_from_admin site setting
* Update tags as well on admin promotion/demotion
* only update tags when they are enabled
* Use new SidebarSectionLinkUpdater
We now have a SidebarSectionLinkUpdater
that was introduced in: fb2507c6ce
* remove empty line
Users who can access the review queue can claim a pending reviewable(s) which means that the claimed reviewable(s) can only be handled by the user who claimed it. Currently, we show claimed reviewables in the user menu, but this can be annoying for other reviewers because they can't do anything about a reviewable claimed by someone. So this PR makes sure that we only show in the user menu reviewables that are claimed by nobody or claimed by the current user.
Internal topic: t/77235.
This PR adds separate notification indicators for PMs and reviewables that have arrived since the last time the user opened the notifications menu.
The PM indicator is the strongest one of all three indicators followed by the reviewable indicator and then finally the blue indicator. This means that if there's a new PM and a new reviewable, then the PM indicator will be shown.
Meta topic: https://meta.discourse.org/t/no-green-or-red-notification-bubbles/242783?u=osama.
Internal topic: t/82995.
While load testing our user creation code path in production, we
identified that executing the DB statement to update the `Group#user_count` column within a
transaction is creating a bottleneck for us. This is because the
creation of a user and addition of the user to the relevant groups are
done in a transaction. When we execute the DB statement to update
`Group#user_count` for the relevant group, a row level lock is held
until the transaction completes. This row level lock acts like a global
lock when the server is creating users that will be added to the same
group in quick succession.
Instead of updating the counter cache within a transaction which the
default ActiveRecord `counter_cache` option does, we simply update the
counter cache outside of the committing transaction.
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Co-authored-by: Rafael dos Santos Silva <xfalcox@gmail.com>
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
This commit introduce a new API for registering callbacks, which we'll execute when a user gets destroyed, and the `delete_posts` opt is true. The chat plugin registers one callback and queues a job to destroy every message from that user in batches.
Follow up to 40e8912395
In this previous commit I introduced a bug that prevented
a legitimate case for an existing user to redeem an invite,
where the email/domain were both blank and the invite was
still redeemable by the user. Fixes the issue and adds more
specs for that case.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
Leonardo Mosquera
Sam
Ted Johansson
Keegan George
Krzysztof Kotlarek
Rafael dos Santos Silva
Blake Erickson
David Taylor
Martin Brennan
Bianca Nenciu
Natalie Tay
Loïc Guitaut
Vinoth Kannan
Alan Guo Xiang Tan
Matt Marjanović
Daniel Waterworth
Osama Sayegh
Roman Rizzi
Gerhard Schlager