In the past we would build the stack of Omniauth providers at boot, which meant that plugins had to register any authenticators in the root of their plugin.rb (i.e. not in an `after_initialize` block). This could be frustrating because many features are not available that early in boot (e.g. Zeitwerk autoloading).
Now that we build the omniauth strategy stack 'just in time', it is safe for plugins to register their auth methods in an `after_initialize` block. This commit relaxes the old restrictions so that plugin authors have the option to move things around.
Previously, we would build the stack of omniauth authenticators once on boot. That meant that all strategies had to be included, even if they were disabled. We then used the `before_request_phase` to ensure disabled strategies could not be used. This works well, but it means that omniauth is often doing unnecessary work running logic in disabled strategies.
This commit refactors things so that we build the stack of strategies on each request. That means we only need to include the enabled strategies in the stack - disabled strategies are totally ignored. Building the stack on-demand like this does add some overhead to auth requests, but on the majority of sites that will be significantly outweighed by the fact we're now skipping logic for disabled authenticators.
As well as the slight performance improvement, this new approach means that:
- Broken (i.e. exception-raising) strategies cannot cause issues on a site if they're disabled
- `other_phase` of disabled strategies will never appear in the backtrace of other authentication errors
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
Using Wizard.exclude_steps applies to all sites in a multisite cluster.
In order to exclude steps for individual sites at run-time, a new
instance method `remove_step` is being added.
This fixes a similar issue to 8b3eca0 where an Errno::ETXTBSY error was raised because the minio_runner gem was trying to install the binary across multiple processes in rspec. If we just make sure the latest version is installed before the tests run, this shouldn't happen, since MinioRunner.start will not do any further attempts at installation if the latest version is installed.
Why this change?
When we're in the midst of loading more tags, the filter dropdown
is still enabled and may result in us firing off multiple requests to
the server to load more tags. This makes the loading hard to reason
about in the tests environment and has led to flaky tests.
What does this change do?
This changes disables the filter dropdown when more tags are being
loading.
Why this change?
Currently, we do not have a method to easily retrieve a theme setting's
value on the server side. Such a method can be useful in the test
environment where we need to retrieve the theme's setting and use its
value in assertions.
What does this change do?
This change introduces the `Theme#get_setting` instance method.
This change adds a new event trigger (new_post_moved) when the first post in a topic is moved to a new topic.
Plugins that listen for the new_post_moved event now have an easy way to update old data based on the post id.
There are a few PUT requests that users can do in their preferences tab that aren't going through the standard `user#update` action.
This commit adds all the "trivial" ones (aka. except the security-related one, username and email changes) so you can now change the badge title, the avatar or featured topic of a user via the API.
This commit adds a new admin UI under the route `/admin-revamp`, which is
only accessible if the user is in a group defined by the new `enable_experimental_admin_ui_groups` site setting. It
also adds a special `admin` sidebar panel that is shown instead of the `main`
forum one when the admin is in this area.
We also add an "Admin Revamp" sidebar link to the community section, which
will only appear if the user is in the setting group:
Within this there are subroutes defined like `/admin-revamp/config/:area`,
these areas could contain any UI imaginable, this is just laying down an
initial idea of the structure and how the sidebar will work. Sidebar links are
currently hardcoded.
Some other changes:
* Changed the `main` and `chat` panels sidebar panel keys to use exported const values for reuse
* Allowed custom sidebar sections to hide their headers with the `hideSectionHeader` option
* Add a `groupSettingArray` setting on `this.siteSettings` in JS, which accepts a group site setting name
and splits it by `|` then converts the items in the array to integers, similar to the `_map` magic for ruby
group site settings
* Adds a `hidden` option for sidebar panels which prevents them from showing in separated mode and prevents
the switch button from being shown
---------
Co-authored-by: Krzysztof Kotlarek <kotlarek.krzysztof@gmail.com>
Why this change?
When the URL `/t/1234?preview_theme_id=21` is loaded, we redirect to
`/t/<topic slug>/1234` stripping the `preview_theme_id` query params.
What does this change do?
This change builds on 61248652cd and
simply adds the `preview_theme_id` query param when redirecting.
* FIX: Secure upload post processing race condition
This commit fixes a couple of issues.
A little background -- when uploads are created in the composer
for posts, regardless of whether the upload will eventually be
marked secure or not, if secure_uploads is enabled we always mark
the upload secure at first. This is so the upload is by default
protected, regardless of post type (regular or PM) or category.
This was causing issues in some rare occasions though because
of the order of operations of our post creation and processing
pipeline. When creating a post, we enqueue a sidekiq job to
post-process the post which does various things including
converting images to lightboxes. We were also enqueuing a job
to update the secure status for all uploads in that post.
Sometimes the secure status job would run before the post process
job, marking uploads as _not secure_ in the background and changing
their ACL before the post processor ran, which meant the users
would see a broken image in their posts. This commit fixes that issue
by always running the upload security changes inline _within_ the
cooked_post_processor job.
The other issue was that the lightbox wrapper link for images in
the post would end up with a URL like this:
```
href="/secure-uploads/original/2X/4/4e1f00a40b6c952198bbdacae383ba77932fc542.jpeg"
```
Since we weren't actually using the `upload.url` to pass to
`UrlHelper.cook_url` here, we weren't converting this href to the CDN
URL if the post was not in a secure context (the UrlHelper does not
know how to convert a secure-uploads URL to a CDN one). Now we
always end up with the correct lightbox href. This was less of an issue
than the other one, since the secure-uploads URL works even when the
upload has become non-secure, but it was a good inconsistency to fix
anyway.
This reverts commit 5f0bc4557f.
Through extensive internal discussion we have decided to revert
this change, as it significantly impacted moderation flow for
some Discourse site moderators, especially around "something else"
flags. We need to re-approach how flags are counted holistically,
so to that end this change is being reverted.
Site data is preloaded on the first page load, which includes categories
data. For sites with many categories, site data takes a long time to
serialize and to transfer.
In the future, preloaded category data will be completely removed.
This commit introduces a new endpoint to search categories and uses it
instead of the categories map that is preloaded using SiteSerializer.
This feature is enabled only when the hidden site setting
lazy_load_categories is enabled and should be used only on sites with
many categories.
The category style site setting is being deprecated. This commit will
show a warning on the admin dashboard if a site isn't using the default
category style (bullet).
At this moment, this feature is under a site setting named
lazy_load_categories.
In the future, categories will no longer be preloaded through site data.
This commit add information about categories in topic list and ensures
that data is used to display topic list items.
Parent categories are serialized too because they are necessary to
render {{category-link}}.
There are cases where a user can copy image markdown from a public
post (such as via the discourse-templates plugin) into a PM which
is then sent via an email. Since a PM is a secure context (via the
.with_secure_uploads? check on Post), the image will get a secure
URL in the PM post even though the backing upload is not secure.
This fixes the bug in that case where the image would be stripped
from the email (since it had a /secure-uploads/ URL) but not re-attached
further down the line using the secure_uploads_allow_embed_images_in_emails
setting because the upload itself was not secure.
The flow in Email::Sender for doing this is still not ideal, but
there are chicken and egg problems around when to strip the images,
how to fit in with other attachments and email size limits, and
when to apply the images inline via Email::Styles. It's convoluted,
but at least this fixes the Template use case for now.
PERF: improve touch, swipe, panning performance on mobile menus
---
* stop event propagation on swipe events: other touch events were stealing a huge amount of time here. Stop event
propagation when handling pan events.
* animate with [web animations api](https://developer.mozilla.org/en-US/docs/Web/API/Web_Animations_API/Using_the_Web_Animations_API)
* prefer translate3d to hint for gpu rendering.
* query document for elements only on start move event, not on subsequent move
events
* remove unused calculations for directioned velocity and distance: all swipe/pan elements function in x/y direction only.
* re-implement scroll locking behavior.
re-implemented scroll lock behavior
---
With stop event propagation, we need to re-implement scroll locking on menu swipes.
Previously, this was using onTouchMove which was costly.
We may now use styling with overflow-y:hidden to lock scroll behavior.
overflow:hidden on html/body elements is now supported by iOS as of 2022
https://bugs.webkit.org/show_bug.cgi?id=153852https://bugs.webkit.org/show_bug.cgi?id=220908
UX: improve swipe
---
Some improvements to get gestures and swipes feeling a little more polished.
This focuses on end gesture, and how we transfer it to a css animation to
complete a menu open/close action.
Multitouch: events may pan, scroll, and zoom - especially on iOS safari.
Cancelling the swipe event allows for a more pleasant zooming experience.
* ease-out on menus opening, linear on close
* calculate animation duration for opening and closing,
attempt to better transfer user swipe velocity to css animation.
* more timely close/open and cleanup from calculated animation timing.
* add animation to closing menus on cloak tap
* correctly animate menus with ease-in and ease-out
* add swipe cancel event on multitouch event
DEV
---
* lean on promises
js animations api gives us promises to listen to. Update test waiters
to use waitForPromise from @ember/test-waiters instead of reigster/unregister.
* convert swipe mixin to its own class.
Convert swipe callbacks to custom events on the element.
Move shared functions for max animation time and close logic to
new shared class.
swipe-events lib uses custom events to trigger callbacks, rather than assuming
implemented hard coded function from the mixin's base class. Custom events are
triggered from the bound element as swipestart, swipeend, swipe
Add shared convenience functions for swipe events so they can be more easily
shared.
A client receives an initial swipe event and can check some state to see if it
wants to handle the swipe event and if it doesn't, calling
`event.preventDefault();` will prevent `swipe` and `swipeend` events from firing
until another distinct swipestart event is fired. Swipe events will auto-cancel on multitouch.
The scroll lock has also exposed as its own utility class.
Why this change?
This ensures that malicious requests cannot end up causing the logs to
quickly fill up. The default chosen is sufficient for most legitimate
requests to the Discourse application.
When truncation happens, parsing of logs in supported format like
lograge may break down.
Why this change?
The `PostsController#create` action allows arbitrary topic custom fields
to be set by any user that can create a topic. Without any restrictions,
this opens us up to potential security issues where plugins may be using
topic custom fields in security sensitive areas.
What does this change do?
1. This change introduces the `register_editable_topic_custom_field` plugin
API which allows plugins to register topic custom fields that are
editable either by staff users only or all users. The registered
editable topic custom fields are stored in `DiscoursePluginRegistry` and
is called by a new method `Topic#editable_custom_fields` which is then
used in the `PostsController#create` controller action. When an unpermitted custom fields is present in the `meta_data` params,
a 400 response code is returned.
2. Removes all reference to `meta_data` on a topic as it is confusing
since we actually mean topic custom fields instead.
Adds UI elements for registering a passkey and logging in with it. The feature is still in an early stage, interested parties that want to try it can use the `experimental_passkeys` site setting (via Rails console).
See PR for more details.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
Preloading just metadata is not always respected by browsers, and
sometimes the whole video will be downloaded. This switches to using a
placeholder image for the video and only loads the video when the play
button is clicked.
Currently, `window.I18n` is defined in an old school hand written
script, inlined into locale/*.js by the Rails asset pipeline, and
then the global variable is shimmed into a pseudo AMD module later
in `module-shims.js`.
This approach has some problems – for one thing, when we add a new
V2 addon (e.g. in #23859), Embroider/Webpack is stricter about its
dependencies and won't let you `import from "I18n";` when `"I18n"`
isn't listed as one of its `dependencies` or `peerDependencies`.
This moves `I18n` into a real package – `discourse-i18n`. (I was
originally planning to keep the `I18n` name since it's a private
package anyway, but NPM packages are supposed to have lower case
names and that may cause problems with other tools.)
This package defines and exports a regular class, but also defines
the default global instance for backwards compatibility. We should
use the exported class in tests to make one-off instances without
mutating the global instance and having to clean it up after the
test run. However, I did not attempt that refactor in this PR.
Since `discourse-i18n` is now included by the app, the locale
scripts needs to be loaded after the app chunks. Since no "real"
work happens until later on when we kick things off in the boot
script, the order in which the script tags appear shouldn't be a
problem. Alternatively, we can rework the locale bundles to be more
lazy like everything else, and require/import them into the app.
I avoided renaming the imports in this commit since that would be
quite noisy and drowns out the actual changes here. Instead, I used
a Webpack alias to redirect the current `"I18n"` import to the new
package for the time being. In a separate commit later on, I'll
rename all the imports in oneshot and remove the alias. As always,
plugins and the legacy bundles (admin/wizard) still relies on the
runtime AMD shims regardless.
For the most part, I avoided refactoring the actual I18n code too
much other than making it a class, and some light stuff like `var`
into `let`.
However, now that it is in a reasonable format to work with (no
longer inside the global script context!) it may also be a good
opportunity to refactor and make clear what is intended to be
public API vs internal implementation details.
Speaking of, I took the librety to make `PLACEHOLDER`, `SEPARATOR`
and `I18nMissingInterpolationArgument` actual constants since it
seemed pretty clear to me those were just previously stashed on to
the `I18n` global to avoid polluting the global namespace, rather
than something we expect the consumers to set/replace.
This is part 2 (of 3) for passkeys support.
This adds a hidden site setting plus routes and controller actions.
1. registering passkeys
Passkeys are registered in a two-step process. First, `create_passkey`
returns details for the browser to create a passkey. This includes
- a challenge
- the relying party ID and Origin
- the user's secure identifier
- the supported algorithms
- the user's existing passkeys (if any)
Then the browser creates a key with this information, and submits it to
the server via `register_passkey`.
2. authenticating passkeys
A similar process happens here as well. First, a challenge is created
and sent to the browser. Then the browser makes a public key credential
and submits it to the server via `passkey_auth_perform`.
3. renaming/deleting passkeys
These routes allow changing the name of a key and deleting it.
4. checking if session is trusted for sensitive actions
Since a passkey is a password replacement, we want to make sure to confirm the user's identity before allowing adding/deleting passkeys. The u/trusted-session GET route returns success if user has confirmed their session (and failed if user hasn't). In the frontend (in the next PR), we're using these routes to show the password confirmation screen.
The `/u/confirm-session` route allows the user to confirm their session with a password. The latter route's functionality already existed in core, under the 2FA flow, but it has been abstracted into its own here so it can be used independently.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
When a user creates or edits a post, we already were updating
the security of uploads in the post based on site settings and
their access control post, which is important since these uploads
may be switched from secure/not secure based on configuration.
The `with_secure_uploads?` method on a post is used to determine
whether to use the secure-uploads URL for all uploads in the post,
regardless of their individual security, so if this is false and
some of the posts are still secure when rebaking, we end up with
broken URLs.
This commit just makes it so rebaking via the UI also re-evaluates
upload security so that when the post is loaded again after processing,
all of the uploads have the correct security.
For the admin plugin list we want to be able to link to
a meta topic for plugins, but we have no standard way to
do this at the moment. This adds support for meta_topic_id
alongside other plugin metadata like authors, URL etc,
that gets built into a Meta topic URL in the serializer.
This PR is a first step towards private groups. It redesigns settings/members area of a channel and also drops the "about" page which is now mixed into settings.
This commit is also:
- introducing chat-form, a small DSL to create forms, ideally I would want something in core for this
- introducing a DToggleSwitch page object component to simplify testing toggles
- migrating various components to gjs
We have a custom implementation of #symbolize_keys in our Onebox helpers. This is likely a legacy from when Onebox was a standalone gem. This change replaces all usages with either #deep_symbolize_keys from ActiveSupport, or appropriate option to the JSON parser gem used.
Why this change?
Back in May 17 2023 along with the release of Discourse 3.1, we announced
on meta that the legacy hamburger dropdown navigation menu is
deprecated and will be dropped in Discourse 3.2. This is the link to the announcement
on meta: https://meta.discourse.org/t/removing-the-legacy-hamburger-navigation-menu-option/265274
## What does this change do?
This change removes the `legacy` option from the `navigation_menu` site
setting and migrates existing sites on the `legacy` option to the
`header dropdown` option.
All references to the `legacy` option in code and tests have been
removed as well.
We have a custom implementation of #blank? in our Onebox helpers. This is likely a legacy from when Onebox was a standalone gem. This change replaces all usages with respective incarnations of #blank?, #present?, and #presence from ActiveSupport. It changes a bunch of "unless blank" to "if present" as well.
Currently, if you set an integer site setting in the admin interface and include thousands separators, you will silently configure the wrong value.
This PR replaces TextField inputs for integer site settings with NumberField. It also cleans the numeric input of any non-digits in the backend in case any separators make it through.
- Allows to copy quotes from mobile
- Allows to copy text of a message from mobile
- Allows to select messages by clicking on it when selection has started
Note this commit is also now using toasts to show a confirmation of copy, and refactors system specs helpers concerning secondary actions.
<!-- NOTE: All pull requests should have tests (rspec in Ruby, qunit in JavaScript). If your code does not include test coverage, please include an explanation of why it was omitted. -->
This is part 1 of 3, split up of PR #23529. This PR refactors the
webauthn code to support passkey authentication/registration.
Passkeys aren't used yet, that is coming in PRs 2 and 3.
Co-authored-by: Alan Guo Xiang Tan <gxtan1990@gmail.com>
I'm not sure why this is necessary and it doesn't seem to affect
anything if I remove it. Either way, we shouldn't have plugin related
code polluting core.
If a codeblock contains **exactly** the same markdown as an image which has been retrieved by the 'pull hotlinked' job, then it will be replaced with the new URL. This commit adds failing (skipped) tests for this issue.
This commit adds support for an optional `prompt` parameter in the
payload of the /session/sso_provider endpoint. If an SSO Consumer
adds a `prompt=none` parameter to the encoded/signed `sso` payload,
then Discourse will avoid trying to login a not-logged-in user:
* If the user is already logged in, Discourse will immediately
redirect back to the Consumer with the user's credentials in a
signed payload, as usual.
* If the user is not logged in, Discourse will immediately redirect
back to the Consumer with a signed payload bearing the parameter
`failed=true`.
This allows the SSO Consumer to simply test whether or not a user is
logged in, without forcing the user to try to log in. This is useful
when the SSO Consumer allows both anonymous and authenticated access.
(E.g., users that are already logged-in to Discourse can be seamlessly
logged-in to the Consumer site, and anonymous users can remain
anonymous until they explicitly ask to log in.)
This feature is similar to the `prompt=none` functionality in an
OpenID Connect Authentication Request; see
https://openid.net/specs/openid-connect-core-1_0.html#AuthRequest
If a user somehow is looking at an old version of the page and attempts
to like a post they already like. Display a more reasonable error message.
Previously we would display:
> You are not permitted to view the requested resource.
New error message is:
> Oops! You already performed this action. Can you try refreshing the page?
Triggering this error condition is very tricky, you need to stop the
message bus. A possible reason for it could be bad network connectivity.
JS tests expect `show_copy_button_on_codeblocks` to be false (because
default before #81f3f56 was false). There is probably a different
issue at play here with JS tests, I haven't dug into it yet.
Instead, this PR adds a system test to ensure copy button is present
for code blocks with default site settings enabled.
What does this change do?
This change improves the `upload_theme` system test helper method by
automatically setting the uploaded theme as the default theme for the
site. This is to make it easier for users to use the theme instead of
having to fiddle with theme previews. The default behaviour of setting
the uploaded theme as the site's default theme can be disabled by
passing `false` to the `set_theme_as_default` keyword argument.
This change also introduces a new `upload_theme_component` system test
helper method for uploading theme components. The difference between the
`upload_theme` helper method is that the theme component is
automatically added to the site's default theme when uploaded. The theme
which the theme component is added to can be configured via the
`parent_theme_id` keyword argument.
For both methods, we also no longer require the path to the theme to be
provided. Instead both methods will look through the callstack and can
figure out the theme's directory based on the convention that the
theme's system tests are placed in the `spec/system` directory of the
theme folder. This change simplifies the usage of the methods for users
and helps to remove code like `upload_theme_component(File.expand_path("../..", __dir__))`.
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@Label={{i18n "foo.bar"}}
@ICON="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @ICON="plus" @Label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
What is the problem we are trying to solve here?
The `/` path in our Ember app leads to the `discovery.index` route but
we actually don't render anything on that route leading to a blank page
if the Ember app were to transition to it which is what was happening
when a user adds a custom sidebar section link with the `/` path.
What is the fix there?
Instead of generating a link for the `discovery.index` route when
creating the sidebar section link, we detect if the Ember route is
`discovery.index` and change it to the `discovery.${defaultHomepage()}`
route instead.
Meta topic: https://meta.discourse.org/t/suppress-these-tags-from-summary-emails-settings-is-not-working-in-preview-digest-email/279196?u=osama
Follow-up to 477a5dd371
The `digest_suppress_tags` setting is designed to be a list of pipe-delimited tag names, but the tag-based topic suppression logic assumes (incorrectly) that the setting contains pipe-delimited tag IDs. This mismatch in expectations led to the setting not working as expected.
This PR adds a step that converts the list of tag names in the setting to their corresponding IDs, which is then used to suppress topics tagged with those specific tags.
* FIX: Return 403 instead of redirect on username routes when hidding profiles
* Updated raised error to better reflect the problem to the user
* implemented suggested changes
Previously, a "`some_not_allowed`" warning message was appeared in composer even when all the users mentioned via group are already invited to the private message directly or via other groups.
* FIX: min_personal_message_post_length not applying to first post
Due to the way PostCreator is wired, we were not applying min_personal_message_post_length
to the first post.
This meant that admins could not configure it so PMs have different
limits.
The code was already pretending that this works, but had no reliable way
of figuring out if we were dealing with a private message
This commit adds limits to themes and theme components on the:
- file size of about.json and .discourse-compatibility
- file size of theme assets
- number of files in a theme
The hidden site setting max_drafts_per_user defaults to 10_000 drafts per user.
The longest key should be "topic_<MAX_BIG_INT>" which is 25 characters.
Second iteration of https://github.com/discourse/discourse/pull/23312 with a fix for embroider not resolving an export file using .gjs extension.
---
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This PR introduces three new UI elements to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Menus are very similar to tooltips and provide the same kind of APIs:
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This extends search so it can have consumers that:
1. Can split off "term" from various advanced filters and orders
2. Can build a relation of either order or filter
It also moves a lot of stuff around in the search class for clarity.
Two new APIs are exposed:
`.apply_filter` to apply all the special filters to a posts/topics relation
`.apply_order` to force a particular order (eg: order:latest)
This can then be used by semantic search in Discourse AI
In #20135 we prevented invalid inputs from being accepted in category setting form fields on the front-end. We didn't do anything on the back-end at that time, because we were still discussing which path we wanted to take. Eventually we decided we want to move this to a new CategorySetting model.
This PR moves the require_topic_approval and require_reply_approval from custom fields to the new CategorySetting model.
This PR is nearly identical to #20580, which migrated num_auto_bump_daily, but since these are slightly more sensitive, they are moved after the previous one is verified.
Previous to this change when both `normalize_emails` and `hide_email_address_taken`
is enabled the expected `account_exists` email was only sent on exact email
matches.
This expands it so it also sends an email to the canonical email owner.
David Taylor
Keegan George
Martin Brennan
Neil Lalonde
Kelv
Alan Guo Xiang Tan
Sérgio Saquetim
David Battersby
Rafael dos Santos Silva
Jarek Radosz
Régis Hanol
Krzysztof Kotlarek
Bianca Nenciu
Blake Erickson
Jeff Wong
Bianca Nenciu
Penar Musaraj
Godfrey Chan
Mark VanLandingham
Joffrey JAFFEUX
Ted Johansson
Sam
Renato Atilio
Natalie Tay
KThompson-Lane-Unity
Matt Marjanović
Gerhard Schlager
Arpit Jalan
Osama Sayegh
Juan David Martínez Cubillos
Vinoth Kannan
Daniel Waterworth