When we change upload's sha1 (e.g. when resizing images) it won't match the data in the most recent S3 inventory index. With this change the uploads that have been updated since the inventory has been generated are ignored.
When FinalDestination is given a URL it encodes it before doing anything else. however S3 presigned URLs should not be messed with in any way otherwise we can end up with 400 errors when downloading the URL e.g.
<Error><Code>InvalidToken</Code><Message>The provided token is malformed or otherwise invalid.</Message>
The signature of presigned URLs is very important and is automatically generated and should be preserved.
This should make the importer more resilient to incomplete or damaged
backups. It will disable some validations and attempt to automatically
repair category permissions before importing.
For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
When 'categories topics' setting is set to 0, the system will
automatically try to find a value to keep the two columns (categories
and topics) symmetrical.
The value is computed as 1.5x the number of top level categories and at
least 5 topics will always be returned.
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
Previously we would use the date the post was updated at as the grant date
this caused confusion.
This also tidies up the badges sql file which was using outdated patterns
for multi line strings.
A race condition issue is possible when multiple thread/processes are calling this method.
`ls` prints out to stderr "cannot access '...': No such file or directory" if any of the files it's currently trying to list are being removed by the `xargs rm -rf` in an another process. That doesn't affect the result, but it did raise an error before this change.
Tested on a production instance where the original issue was observed.
Co-Authored-By: Régis Hanol <regis@hanol.fr>
This allows us to use `sourceURL` which otherwise does not work. In the
future we hope to have proper source maps in development mode and
disable this again.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
For consistency this PR introduces using custom markdown and short upload:// URLs for video and audio uploads, rather than just treating them as links and relying on the oneboxer. The markdown syntax for videos is  and for audio it is .
This is achieved in discourse-markdown-it by modifying the rules for images in mardown-it via md.renderer.rules.image. We return HTML instead of the token when we encounter audio or video after | and the preview renders that HTML. Also when uploading an audio or video file we insert the relevant markdown into the composer.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
The `sourceURL` directive must be on the same line as the thing it's
referencing. This patch allows it to work again in development mode
because each Javascript file ends up in its own `define(...)` line.
It will strip out any trailing whitespace and put the `sourceURL`
comment on the same line and everything seems to work.
group membership and `CategoryUser` notification level should be
respected to determine whether to notify staged users about activity in
private categories, instead of only ever generating notifications for staged
users' own topics (which has been the behaviour since
0c4ac2a7bc)
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
On some customer forums we are randomly getting a "You must select a valid user" error when sending a PM even when all parameters seem to be OK. This is an attempt to track it down with more data.
ReviewableScore#types extend the PostActionTypes with their own, storing the result inside a class variable. To avoid overwriting an existing flag, we need to calculate the next flag ID using these types instead of the PostAction ones. Since we first call the score types to calculate the id, this list gets memoized, leaving us with an outdated list.
To fix this, we now reload ReviewableScore#types after replacing flags.
Custom emoji, profile background, and card background were being set to secure, which we do not want as they are always in a public context and result in a 403 error from the ACL if linked directly.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
Some specs use psql to test database restores and dropping the table after the test needs to happen outside of rspec because of transactions. The previous attempt lead to some changes to be stored in the test database.
Jarek Radosz
Martin Brennan
Dan Ungureanu
Mark VanLandingham
Arpit Jalan
Martin Brennan
Neil Lalonde
Sam Saffron
Gerhard Schlager
David Taylor
adam j hartz
Rafael dos Santos Silva
Robin Ward
Krzysztof Kotlarek
Roman Rizzi
Régis Hanol
mintsaxon
Leo McArdle
Penar Musaraj