This new site setting replaces the
`enable_experimental_sidebar_hamburger` and `enable_sidebar` site
settings as the sidebar feature exits the experimental phase.
Note that we're replacing this without depreciation since the previous
site setting was considered experimental.
Internal Ref: /t/86563
* Remove old bookmark column ignores to follow up b22450c7a8
* Change some group site setting checks to use the _map helper
* Remove old secure_media helper stub for chat
* Change attr_accessor to attr_reader for preloaded_custom_fields to follow up 70af45055a
This will replace `enable_personal_messages` and
`min_trust_to_send_messages`, this commit introduces
the setting `personal_message_enabled_groups`
and uses it in all places that `enable_personal_messages`
and `min_trust_to_send_messages` currently apply.
A migration is included to set `personal_message_enabled_groups`
based on the following rules:
* If `enable_personal_messages` was false, then set
`personal_message_enabled_groups` to `3`, which is
the staff auto group
* If `min_trust_to_send_messages` is not default (1)
and the above condition is false, then set the
`personal_message_enabled_groups` setting to
the appropriate auto group based on the trust level
* Otherwise just set `personal_message_enabled_groups` to
11 which is the TL1 auto group
After follow-up PRs to plugins using these old settings, we will be
able to drop the old settings from core, in the meantime I've added
DEPRECATED notices to their descriptions and added them
to the deprecated site settings list.
This commit also introduces a `_map` shortcut method definition
for all `group_list` site settings, e.g. `SiteSetting.personal_message_enabled_groups`
also has `SiteSetting.personal_message_enabled_groups_map` available,
which automatically splits the setting by `|` and converts it into
an array of integers.
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
This table holds associations between uploads and other models. This can be used to prevent removing uploads that are still in use.
* DEV: Create upload_references
* DEV: Use UploadReference instead of PostUpload
* DEV: Use UploadReference for SiteSetting
* DEV: Use UploadReference for Badge
* DEV: Use UploadReference for Category
* DEV: Use UploadReference for CustomEmoji
* DEV: Use UploadReference for Group
* DEV: Use UploadReference for ThemeField
* DEV: Use UploadReference for ThemeSetting
* DEV: Use UploadReference for User
* DEV: Use UploadReference for UserAvatar
* DEV: Use UploadReference for UserExport
* DEV: Use UploadReference for UserProfile
* DEV: Add method to extract uploads from raw text
* DEV: Use UploadReference for Draft
* DEV: Use UploadReference for ReviewableQueuedPost
* DEV: Use UploadReference for UserProfile's bio_raw
* DEV: Do not copy user uploads to upload references
* DEV: Copy post uploads again after deploy
* DEV: Use created_at and updated_at from uploads table
* FIX: Check if upload site setting is empty
* DEV: Copy user uploads to upload references
* DEV: Make upload extraction less strict
The `plugin:pull_compatible_all` task is intended to take incompatible plugins and downgrade them to an earlier version. Problem is, when running the rake task in development/production environments, the plugins have already been activated. If an incompatible plugin raises an error in `plugin.rb` then the rake task will be unable to start.
This commit centralises our LOAD_PLUGINS detection, adds support for LOAD_PLUGINS=0 in dev/prod, and adds a warning to `plugin:pull_compatible_all` if it's run with plugins enabled.
`self.class` here evaluates to `Class` and then we're calling `define_method` on it which means all classes will have those methods defined in them. For example:
```
~/discourse(master*) » rails c
Loading development environment (Rails 6.0.3.3)
[1] pry(main)> Integer.methods
=> [:sqrt,
:yaml_tag,
:email_domains_blacklist=,
:email_domains_whitelist=,
:unicode_username_character_whitelist=,
:user_website_domains_whitelist=,
:whitelisted_link_domains=,
:email_domains_blacklist,
:email_domains_whitelist,
:unicode_username_character_whitelist,
...
...
```
Fix here is to use `self.define_singleton_method`.
On some sites when bootstrapping communities it is helpful to bootstrap
with a "light weight" invite code.
Use the site setting `invite_code` to set a global invite code.
In this case the administrator can share the code with
a community which is very easy to remember and then anyone who has
that code can easily register accounts.
People without the invite code are not allowed account registration.
Global invite codes are less secure than indevidual codes, in that they
tend to leak in the community however in some cases when starting a brand
new community the security guarantees of invites are not needed.
Added on Aug 21, 2015 in bef80633b1
The only usage removed on Aug 26, 2015 in 4ba89eec27
As far I can tell it isn't used by core or any official plugins.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Some site settings (e.g. `unicode_username_character_whitelist`) depend on the default locale, so we need to reset the watched settings when the locale changes.
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
- s3_force_path_style was added as a Minio specific url scheme but it has never been well supported in our code base.
- Our new migrate_to_s3 rake task does not work reliably with path style urls too
- Minio has also added support for virtual style requests i.e the same scheme as AWS S3/DO Spaces so we can rely on that instead of using path style requests.
- Add migration to drop s3_force_path_style from the site_settings table
When `s3_bucket="bucket/folder` in discourse.conf, absolute_base_url
was bucket/folder.s3-region.amazonaws.com
These names are bad, but this mirrors the s3_bucket/s3_bucket_name in
S3Store
N.B. that nearby s3_upload_bucket _should_ include the folder
This feature can be enabled by choosing a destination for the
`shared drafts category` site setting.
* Staff members can create shared drafts, choosing a destination
category for the topic when it is published.
* Shared Drafts can be viewed in their category, or above the
topic list for the destination category where it will end up.
* When the shared draft is ready, it can be published to the
appropriate category by clicking a button on the topic view.
* When published, Drafts change their timestamps to the current
time, and any edits to the original post are removed.