Before this change, we were using the labels from the original chartData to the chart builder, and we would then apply our collapse function on each dataset which could change the labels and cause a mismatch.
This was very visible when using quarterly periods on consolidated pageviews.
This removes the option to override the sleep time between caching of
DNS records. The override was invalid because `''.to_i` is 0 in Ruby,
causing a tight loop calling the `run` method.
For Redis connections that operate over TLS, we need to ensure that we
are setting the correct arguments for the Redis client. We can utilise
the existing environment variable `DISCOURSE_REDIS_USE_SSL` to toggle
this behaviour.
No SSL verification is performed for two reasons:
- the Discourse application will perform a verification against any FQDN
as specified for the Redis host
- the healthcheck is run against the _resolved_ IP address for the Redis
hostname, and any SSL verification will always fail against a direct
IP address
If no SSL arguments are provided, the IP address is never cached against
the hostname as no healthy address is ever found in the HealthyCache.
Modify the cache_critical_dns script for SRV RR awareness. The new
behaviour is only enabled when one or more of the following environment
variables are present (and only for a host where the `DISCOURSE_*_HOST_SRV`
variable is present):
- `DISCOURSE_DB_HOST_SRV`
- `DISCOURSE_DB_REPLICA_HOST_SRV`
- `DISCOURSE_REDIS_HOST_SRV`
- `DISCOURSE_REDIS_REPLICA_HOST_SRV`
Some minor changes in refactor to original script behaviour:
- add Name and SRVName classes for storing resolved addresses for a hostname
- pass DNS client into main run loop instead of creating inside the loop
- ensure all times are UTC
- add environment override for system hosts file path and time between DNS
checks mainly for testing purposes
The environment variable for `BUNDLE_GEMFILE` is set to enables Ruby to
load gems that are installed and vendored via the project's Gemfile.
This script is usually not run from the project directory as it is
configured as a system service (see
71ba9fb7b5/templates/cache-dns.template.yml (L19))
and therefore cannot load gems like `pg` or `redis` from the default
load paths. Setting this environment variable configures bundler to look
in the correct project directory during it's setup phase.
When a `DISCOURSE_*_HOST_SRV` environment variable is present, the
decision for which target to cache is as follows:
- resolve the SRV targets for the provided hostname
- lookup the addresses for all of the resolved SRV targets via the
A and AAAA RRs for the target's hostname
- perform a protocol-aware healthcheck (PostgreSQL or Redis pings)
- pick the newest target that passes the healthcheck
From there, the resolved address for the SRV target is cached against
the hostname as specified by the original form of the environment
variable.
For example: The hostname specified by the `DISCOURSE_DB_HOST` record
is `database.example.com`, and the `DISCOURSE_DB_HOST_SRV` record is
`database._postgresql._tcp.sd.example.com`. An SRV RR lookup will return
zero or more targets. Each of the targets will be queried for A and AAAA
RRs. For each of the addresses returned, the newest address that passes
a protocol-aware healthcheck will be cached. This address is cached so
that if any newer address for the SRV target appears we can perform a
health check and prefer the newer address if the check passes.
All resolved SRV targets are cached for a minimum of 30 minutes in memory
so that we can prefer newer hosts over older hosts when more than one target
is returned. Any host in the cache that hasn't been seen for more than 30
minutes is purged.
See /t/61485.
Mozilla Thunderbird email client add links into HTML as follows:
`<p>The link: <a class="moz-txt-link-freetext" href="https://google.com">https://google.com</a></p>`
Current filtering rules strip out the link, leaving only `<p>The link: </p>`.
Properly strip only unnecessary information: quote prefix, signature, forwarded message header.
We were calling `dup` on the hash and using that to check for changes. However, we were not duplicating the values, so changes to arrays or nested hashes would not be detected.
Other things may have added things to the style attribute (e.g. the `image-aspect-ratio` decorator).
Unfortunately this is difficult to add a test for because `lazy-load-images` leans on the `onload` event. We have no control over image loading in tests, so race conditions would be very likely.
- Make proxy pass `x-forward...` headers, so that Rails can set the host/port correctly in the csp
- Make `testem.js` available on a route which is within the app's default CSP
There was an edge when a user re-quoted a nested quote that it would return an incorrect `full name` but the correct `username` for the original quote. This PR updates the logic to fall back to using the OP user's username.
The complexity of the changes required to allow for full names to be displayed on nested quotes far outweighs how rare quoting nested quotes is.
This pull request follows on from https://github.com/discourse/discourse/pull/16308. This one does the following:
* Changes `BookmarkQuery` to allow for querying more than just Post and Topic bookmarkables
* Introduces a `Bookmark.register_bookmarkable` method which requires a model, serializer, fields and preload includes for searching. These registered `Bookmarkable` types are then used when validating new bookmarks, and also when determining which serializer to use for the bookmark list. The `Post` and `Topic` bookmarkables are registered by default.
* Adds new specific types for Post and Topic bookmark serializers along with preloading of associations in `UserBookmarkList`
* Changes to the user bookmark list template to allow for more generic bookmarkable types alongside the Post and Topic ones which need to display in a particular way
All of these changes are gated behind the `use_polymorphic_bookmarks` site setting, apart from the .hbs changes where I have updated the original `UserBookmarkSerializer` with some stub methods.
Following this PR will be several plugin PRs (for assign, chat, encrypt) that will register their own bookmarkable types or otherwise alter the bookmark serializers in their own way, also gated behind `use_polymorphic_bookmarks`.
This commit also removes `BookmarkQuery.preloaded_custom_fields` and the functionality surrounding it. It was added in 0cd502a558 but only used by one plugin (discourse-assign) where it has since been removed, and is now used by no plugins. We don't need it anymore.
This was causing unexpected behaviors on production builds. And also on firefox on local environnement, however the issues was slightly different.
- production chrome: colors don't load
- dev firefox: colors don't change when selecting a different color set
A category_required_tag_group should always have an associated tag_group. However, this is only enforced at the application layer, so it's technically possible for the database to include a category_required_tag_group without a matching tag_group.
Previously that situation would cause the whole site to go offline. With this change, it will cause some unexpected behavior, but the site serializer will not raise an error.
Previously, accessing the Rails app directly in development mode would give you assets from our 'legacy' Ember asset pipeline. The only way to run with Ember CLI assets was to run ember-cli as a proxy. This was quite limiting when working on things which are bypassed when using the ember-cli proxy (e.g. changes to `application.html.erb`). Also, since `ember-auto-import` introduced chunking, visiting `/theme-qunit` under Ember CLI was failing to include all necessary chunks.
This commit teaches Sprockets about our Ember CLI assets so that they can be used in development mode, and are automatically collected up under `/public/assets` during `assets:precompile`. As a bonus, this allows us to remove all the custom manifest modification from `assets:precompile`.
The key changes are:
- Introduce a shared `EmberCli.enabled?` helper
- When ember-cli is enabled, add ember-cli `/dist/assets` as the top-priority Rails asset directory
- Have ember-cli output a `chunks.json` manifest, and teach `preload_script` to read it and append the correct chunks to their associated `afterFile`
- Remove most custom ember-cli logic from the `assets:precompile` step. Instead, rely on Rails to take care of pulling the 'precompiled' assets into the `public/assets` directory. Move the 'renaming' logic to runtime, so it can be used in development mode as well.
- Remove fingerprinting from `ember-cli-build`, and allow Rails to take care of things
Long-term, we may want to replace Sprockets with the lighter-weight Propshaft. The changes made in this commit have been made with that long-term goal in mind.
tldr: when you visit the rails app directly, you'll now be served the current ember-cli assets. To keep these up-to-date make sure either `ember serve`, or `ember build --watch` is running. If you really want to load the old non-ember-cli assets, then you should start the server with `EMBER_CLI_PROD_ASSETS=0`. (the legacy asset pipeline will be removed very soon)
Bianca Nenciu
dependabot[bot]
Discourse Translator Bot
Andrei Prigorshnev
Joffrey JAFFEUX
Michael Fitz-Payne
Penar Musaraj
Kris
David Taylor
Jarek Radosz
Roman Rizzi
ValdikSS
Isaac Janzen
Gerhard Schlager
Martin Brennan