Lots of changes but it's mostly a refactoring.
The interesting part that was fix are the 'load_problem_<model>_ids' methods.
They will now return records with no search data associated so they can be properly indexed for the search.
This "bad" state usually happens after a migration.
Improvements to make console access to IncomingEmail more pleasant, and stopping certain IMAP logs from landing in the DB because they just create too much noise,
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This adds a safe default to not process pop3 emails when the pop3 polling option is set up that are > 1 week old. This is to avoid the situation where an older mailbox is used, which causes us to go and process all emails in that mailbox, sending out error emails to the senders of emails which cannot be parsed successfully.
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
osts from topics with 'auto delete replies timer' with more than
skip_auto_delete_reply_likes likes will no longer be deleted. If 0,
all posts will be deleted.
My initial implementation didn't consider this case. We should skip imported users if the "imported_id" field is present, even if there're other custom fields.
This commit is dedicated to https://twitter.com/FiloSottile/status/1335666583126073354 for reminding me that like timestamps are valuable data.
Likes additionally include the topic_id and post_number of the acted post, to aid in analysis. Flag export does not include the disposition by staff.
When jobs are enqueued inside a transaction, it's possible that they will be executed before the necessary data is available in the database. This commit ensures all jobs are enqueued in an ActiveRecord after_commit hook.
One potential downside here is if the job fails to enqueue, the transaction will no longer be aborted. However, the chance of that happening is reasonably low, and the impact is significantly lower than the current issue where jobs are scheduled before their data is ready.
This commit adds an additional find_user_by_email hook to ManagedAuthenticator so that GitHub login can continue to support secondary email addresses
The github_user_infos table will be dropped in a follow-up commit.
This is the last core authenticator to be migrated to ManagedAuthenticator 🎉
When the linked topic is created we'll not hardcode the topic title and
let onebox work its magic instead so that the title can be updated
automatically.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
Our Email::Sender class accepts an optional user argument, which is used to create a PostReplyKey record when present. This record is used to sub out the %{reply_key} placeholder in the Reply-To mail header, so if we do not pass in the user we get a broken Reply-To header.
This is especially problematic in the IMAP group SMTP situation, because these emails go to customers that we are replying to, and when they reply to us the email bounces! This fixes the issue by passing user to the Email::Sender when sending a group_smtp email but there is still more to do in another PR.
This Email::Sender optional user is a bit of a footgun IMO, especially because most of the time we use it there is a user we can source. I would like to do another PR for this after this one to make the parameter not optional, so we don't end up with these reply issues down the line again.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
Previously, Jobs::EnqueueDigestEmails would enqueue a digest job for every user, even if there are no topics to send. The digest job would exit, no email would send, and last_emailed_at would not change. 30 minutes later, Jobs::EnqueueDigestEmails would run again and re-enqueue jobs for the same users.
120fa8ad introduced a temporary mitigation for this issue, by randomly selecting a subset of those users each time.
This commit adds a new `digest_attempted_at` column to the `user_stats` table. This column is updated every time a digest job completes for a user. Using this, we can avoid scheduling digest jobs for the same user every 30 minutes. This also removes the random user selection in 120fa8ad, and instead prioritizes users who had digests attempted the longest time ago.
To avoid blocking the sidekiq queue a limit of 10,000 digests per 30 minutes
is introduced.
This acts as a safety measure that makes sure we don't keep pouring oil on
a fire.
On multisites it is recommended to set the number way lower so sites do not
dominate the backlog. A reasonable default for multisites may be 100-500.
This can be controlled with the environment var
DISCOURSE_MAX_DIGESTS_ENQUEUED_PER_30_MINS_PER_SITE
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
* FEATURE: Export the entire user profile as json, not just bio/website
* FEATURE: Add session log information to user export
Even though the columns are named 'auth_token' etc, the content is not actually usable to log into the forum with. Despite all that, it is still truncated for export, to avoid any 'token hash cracking' situations.
Extracted commonly used spec helpers into spec/support/uploads_helpers.rb, removed unused stubs and let definitions. Makes it easier to write new S3-related specs without copy and pasting setup steps from other specs.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
After restoring a backup it takes up to 48 hours for uploads stored on S3 to appear in the S3 inventory. This change prevents alerts about missing uploads by preventing the EnsureS3UploadsExistence job from running in the first 48 hours after a restore. During the restore it deletes the count of missing uploads from the PluginStore, so that an alert isn't triggered by an old number.
It is possible that a user could exist without an email, if so we should
not enqueue a job to download their gravatar.
This commit resolves this error that can occur:
```
Job exception: undefined method `email' for nil:NilClass
/var/www/discourse/app/models/user.rb:1204:in `email'
/var/www/discourse/app/jobs/regular/update_gravatar.rb:12:in `execute'
```
This commit also fixes the original spec which actually was wrong. The
job never enqueued in the original spec and so the gravatar was never
actually updated and the test was checking if the two values were the
same, but they were both null and never updated, so of course they were
the same!
A new test has also been added to make sure the gravatar job isn't
enqueued when a user's email is missing.
* FEATURE: Use predictable filenames inside the user archive export
* FEATURE: Include badges in user archive export
* FEATURE: Add user_visits table to the user archive export
This is in preparation for improvements to the user archive export data.
Some refactors happened along the way, including calling the different _export methods 'components' of the zip file.
Additionally, make the test for post export much more comprehensive.
Copy sources:
app/jobs/regular/export_csv_file.rb
spec/jobs/export_csv_file_spec.rb
With the addition of `PostSearchData#private_message`, a partial
index consisting of only search data from regular posts can be created.
The partial index helps to speed up searches on large sites since PG
will not have to do an index scan on the entire search data index which
has shown to be a bottle neck.
Convert all IMAP logging to write to a database table for easier inspection. These logs are cleaned up daily if they are > 5 days old.
Logs can easily be watched in dev by setting DISCOURSE_DEV_LOG_LEVEL=\"debug\" and running tail -f development.log | grep IMAP
When a tab is open but left unattended for a while, the red, green, and blue
pills tend to go out of sync.
So whevener we open the notifications menu, we sync up the notification count
(eg. blue and green pills) with the server.
However, the reviewable count (eg. the red pill) is not a notification and
is located in the hamburger menu. This commit adds a new route on the server
side to retrieve the reviewable count for the current user and a ping
(refreshReviewableCount) from the client side to sync the reviewable count
whenever they open the hamburger menu.
REFACTOR: I also refactored the hamburger-menu widget code to prevent repetitive uses
of "this.".
PERF: I improved the performance of the 'notify_reviewable' job by doing only 1 query
to the database to retrieve all the pending reviewables and then tallying based on the
various rights.
Previously we would unconditionally keep all images downloaded via pull_hotlinked_images, even if they are later removed from the post. This commit removes that logic, and relies on the existing link_post_uploads process to pick up the downloaded images in `cooked`. Specs are added to ensure this is working correctly for regular hotlinked images, and for oneboxes.
This commit should cause no functional change
- Split into functions to avoid deep nesting
- Register custom field type, and remove manual json parse/serialize
- Recover from deleted upload records
Also adds a test to ensure pull_hotlinked_images redownloads secure images only once
* FEATURE: notify admins about old credentials
Security and API keys should be renewed periodically.
This additional notification should help admins keep their Discourse safe and secure.
* DEV: new S3 backup layout
Currently, with $S3_BACKUP_BUCKET of "bucket/backups", multisite backups
end up in "bucket/backups/backups/dbname/" and single-site will be in
"bucket/backups/".
Both _should_ be in "bucket/backups/dbname/"
- remove MULTISITE_PREFIX,
- always include dbname,
- method to move to the new prefix
- job to call the method
* SPEC: add tests for `VacateLegacyPrefixBackups` onceoff job.
Co-authored-by: Vinoth Kannan <vinothkannan@vinkas.com>
When running jobs in tests, we use `Jobs.run_immediately!`. This means that jobs are run synchronously when they are enqueued. Jobs sometimes enqueue other jobs, which are also executed synchronously. This means that the outermost job will block until the inner jobs have finished executing. In some cases (e.g. process_post with hotlinked images) this can lead to a deadlock.
This commit changes the behavior slightly. Now we will never run jobs inside other jobs. Instead, we will queue them up and run them sequentially in the order they were enqueued. As a whole, they are still executed synchronously. Consider the example
```ruby
class Jobs::InnerJob < Jobs::Base
def execute(args)
puts "Running inner job"
end
end
class Jobs::OuterJob < Jobs::Base
def execute(args)
puts "Starting outer job"
Jobs.enqueue(:inner_job)
puts "Finished outer job"
end
end
Jobs.enqueue(:outer_job)
puts "All jobs complete"
```
The old behavior would result in:
```
Starting outer job
Running inner job
Finished outer job
All jobs complete
```
The new behavior will result in:
```
Starting outer job
Finished outer job
Running inner job
All jobs complete
```
It might happen that some User records have no associated primary emails.
In which case we don't ever want to send them a digest.
Also added a new "user_email_no_email" skipped email log to ensure these cases
are properly handled and surfaced.
* FEATURE: notify admins about old credentials
Security and API keys should be renewed periodically.
This additional notification should help admins keep their Discourse safe and secure.
This reverts commit 20780a1eee.
* SECURITY: re-adds accidentally reverted commit:
03d26cd6: ensure embed_url contains valid http(s) uri
* when the merge commit e62a85cf was reverted, git chose the 2660c2e2 parent to land on
instead of the 03d26cd6 parent (which contains security fixes)
* PERF: Dematerialize topic_reply_count
It's only ever used for trust level promotions that run daily, or compared to 0. We don't need to track it on every post creation.
* UX: Add symbol in TL3 report if topic reply count is capped
* DEV: Drop user_stats.topic_reply_count column
This reverts commit 6f9177e2ed.
We decided on a completely different approach to the problem.
Instead we will let blocked emails be treated as canonical.
The main thrust of this PR is to take all the conditional checks based on the `enable_bookmarks_with_reminders` away and only keep the code from the `true` path, making bookmarks with reminders the core bookmarks feature. There is also a migration to create `Bookmark` records out of `PostAction` bookmarks for a site.
### Summary
* Remove logic based on whether enable_bookmarks_with_reminders is true. This site setting is now obsolete, the old bookmark functionality is being removed. Retain the setting and set the value to `true` in a migration.
* Use the code from the rake task to create a database migration that creates bookmarks from post actions.
* Change the bookmark report to read from the new table.
* Get rid of old endpoints for bookmarks
* Link to the new bookmarks list from the user summary page
Within 24 hours of signing up, new users were losing their
default trust level of 3. With this fix, demotions from
trust level 3 won't happen when the "default trust level"
setting is 3 or 4.
The new `enforce_canonical_emails` site setting ensures that emails in the
canonical form are unique.
This mean that if `s.a.m+1@gmail.com` is registered `sam@gmail.com` will
not be allowed.
The commit contains a blanket "tag strip" (stripping everything after +)
it also contains special handling of a "dot strip" for googlemail and gmail.
The setting only impacts new registrations after `enforce_canonical_emails`
The setting is default false so it will not impact any existing installs.
If the “secure media” site setting is enabled then ALL files uploaded to Discourse (images, video, audio, pdf, txt, zip etc. etc.) will follow the secure media rules. The “prevent anons from downloading files” setting will no longer have any bearing on upload security. Basically, the feature will more appropriately be called “secure uploads” instead of “secure media”.
This is being done because there are communities out there that would like all attachments and media to be secure based on category rules but still allow anonymous users to download attachments in public places, which is not possible in the current arrangement.
* This PR implements the scheduling and notification system for bookmark reminders. Every 5 minutes a schedule runs to check any reminders that need to be sent before now, limited to **300** reminders at a time. Any leftover reminders will be sent in the next run. This is to avoid having to deal with fickle sidekiq and reminders in the far-flung future, which would necessitate having a background job anyway to clean up any missing `enqueue_at` reminders.
* If a reminder is sent its `reminder_at` time is cleared and the `reminder_last_sent_at` time is filled in. Notifications are only user-level notifications for now.
* All JavaScript and frontend code related to displaying the bookmark reminder notification is contained here. The reminder functionality is now re-enabled in the bookmark modal as well.
* This PR also implements the "Remind me next time I am at my desktop" bookmark reminder functionality. When the user is on a mobile device they are able to select this option. When they choose this option we set a key in Redis saying they have a pending at desktop reminder. The next time they change devices we check if the new device is desktop, and if it is we send reminders using a DistributedMutex. There is also a job to ensure consistency of these reminders in Redis (in case Redis drops the ball) and the at desktop reminders expire after 20 days.
* Also in this PR is a fix to delete all Bookmarks for a user via `UserDestroyer`
* DEV: Reserve webhook event types to be used in plugins
Based on feedback on the following PR's:
https://github.com/discourse/discourse-solved/pull/85https://github.com/discourse/discourse-assign/pull/61
This commit reserves ID's to be used for webhook event types to ensure
that some other webhook or plugin doesn't end up using the same ID.
* Fix broken test
I don't think this test has to test ALL event types to verify that this
feature is working. Now that we added some event types that plugins are
using this test was failing for missing fabricators that exist in the
respective plugins.
* remove loop and just test first record
* Add uploads:sync_s3_acls rake task to ensure the ACLs in S3 are the correct (public-read or private) setting based on upload security
* Improved uploads:disable_secure_media to be more efficient and provide better messages to the user.
* Rename uploads:ensure_correct_acl task to uploads:secure_upload_analyse_and_update as it does more than check the ACL
* Many improvements to uploads:secure_upload_analyse_and_update
* Make sure that upload.access_control_post is unscoped so deleted posts are still fetched, because they still affect the security of the upload.
* Add escape hatch for capture_stdout in the form of RAILS_ENABLE_TEST_STDOUT. If provided the capture_stdout code will be ignored, so you can see the output if you need.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
Regression was created here:
https://github.com/discourse/discourse/pull/8750
When tag or category is added and the user is watching that category/tag
we changed notification type to `edited` instead of `new post`.
However, the logic here should be a little bit more sophisticated.
If the user has already seen the post, notification should be `edited`.
However, when user hasn't yet seen post, notification should be "new
reply". The case for that is when for example topic is under private
category and set for publishing later. In that case, we modify an
existing topic, however, for a user, it is like a new post.
Discussion on meta:
https://meta.discourse.org/t/publication-of-timed-topics-dont-trigger-new-topic-notifications/139335/13
Previously the badge was granted one month after the last time the badge was granted. The exact date shifted by one day each month. The new logic tries to grant the badge always at the beginning of a new month by looking at new users of the previous month. The "granted at" date is set to the end of the previous month.
When pull_hotlinked_images tried to run on posts with secure media (which had already been downloaded from external sources) we were getting a 404 when trying to download the image because the secure endpoint doesn't allow anon downloads.
Also, we were getting into an infinite loop of pull_hotlinked_images because the job didn't consider the secure media URLs as "downloaded" already so it kept trying to download them over and over.
In this PR I have also refactored secure-media-upload URL checks and mutations into single source of truth in Upload, adding a SECURE_MEDIA_ROUTE constant to check URLs against too.
There is a feature, that when tag or category is added to the topic,
customers who are watching that category or tag are notified.
The problem is that it is using default notification type "new post"
It would be better to use "new post" only when there really is a new
post and "edited" when categories or tags were modified.
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
* UI: Mass grant a badge from the admin ui
* Send the uploaded CSV and badge ID to the backend
* Read the CSV and grant badge in batches
* UX: Communicate the result to the user
* Don't award if badge is disabled
* Create a 'send_notification' method to remove duplicated code, slightly shrink badge image. Replace router transition with href.
* Dynamically discover current route
The secure media functionality relied on `SiteSetting.enable_s3_uploads?` which, as we found in dev, did not take into account global S3 settings via `GlobalSetting.use_s3?`. We now use `SiteSetting.Upload.enable_s3_uploads` instead to be more consistent.
Also, we now validate `enable_s3_uploads` changes, because if `GlobalSetting.use_s3?` is true users should NOT be enabling S3 uploads manually.
I made a regression here 17366d3bcc (diff-ddeebb36d131f89ca91be9d04c2baefaR10)
When the tag is added, people watching specific tag are notified but also people watching specific category.
Therefore, `notify_post_users` should accept options who should be notified.
So when `category` is added to the topic, users watching topic and users watching category are notified.
When `tag` is added to the topic, users watching topic and users watching tag are notified
Finally, when a new post is created, everybody is notified, topic watchers, category watchers, tag watchers.
* Fix user title logic when badge name customized
* Fix an issue where a user's title was not considered a badge granted title when the user used a badge for their title and the badge name was customized. this affected the effectiveness of revoke_ungranted_titles! which only operates on badge_granted_titles.
* When a user's title is set now it is considered a badge_granted_title if the badge name OR the badge custom name from TranslationOverride is the same as the title
* When a user's badge is revoked we now also revoke their title if the user's title matches the badge name OR the badge custom name from TranslationOverride
* Add a user history log when the title is revoked to remove confusion about why titles are revoked
* Add granted_title_badge_id to user_profile, now when we set badge_granted_title on a user profile when updating a user's title based on a badge, we also remember which badge matched the title
* When badge name (or custom text) changes update titles of users in a background job
* When the name of a badge changes, or in the case of system badges when their custom translation text changes, then we need to update the title of all corresponding users who have a badge_granted_title and matching granted_title_badge_id. In the case of system badges we need to first get the proper badge ID based on the translation key e.g. badges.regular.name
* Add migration to backfill all granted_title_badge_ids for both normal badge name titles and titles using custom badge text.
Issue was mentioned in this [meta topic](https://meta.discourse.org/t/send-a-notification-to-watching-users-when-adding-tag/125314)
It is working well when category is changed because NotifyCategoryChange job already got that code:
```
if post&.topic&.visible?
post_alerter = PostAlerter.new
post_alerter.notify_post_users(post, User.where(id: args[:notified_user_ids]))
post_alerter.notify_first_post_watchers(post, post_alerter.category_watchers(post.topic))
end
```
For NotifyTagChange job notify post users were missing so it worked only when your notification was set to `watching first post`
Previously every hour we would run a full scan of the entire DB searching
for expired uploads that need to be moved to the tombstone folder.
This commit amends it so we only run the job 2 times per clean_orpha_uploads_grace_period_hours
There is a upper bound of 7 days so even if the grace period is set really
high it will still run at least once a week.
By default we have a 48 grace period so this amends it to run this cleanup
daily instead of hourly. This eliminates 23 times we run this ultra expensive
query.
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
Mark VanLandingham
Régis Hanol
Martin Brennan
Bianca Nenciu
Roman Rizzi
Krzysztof Kotlarek
Kane York
David Taylor
Penar Musaraj
Arpit Jalan
Guo Xiang Tan
Vinoth Kannan
Sam
Jarek Radosz
Gerhard Schlager
Blake Erickson
jbrw
Robin Ward
Dan Ungureanu
Andrew Schleifer
Michael Brown
Jeff Atwood
Neil Lalonde
Joffrey JAFFEUX
Gerhard Schlager
tshenry
Martin Brennan
Vinoth Kannan
