Issue #3964
* Avoid creating listener list for rarely used requestAttributeListener
* AbstractConnector keeps a specific list of HttpChannel.Listeners
to avoid Connection.Listeners and MBean listeners being added to
the HttpChannel listener list.
* Simplified listener handling by avoiding null connector, previously
only needed for testing.
* Fixed test that assumed HttpChannel listeners were not cleared by a recycle
* Separated out durable vs cyclic HttpChannel.Listeners, so as to
simplify handling.
* Deprecated cyclic HttpChannel.Listeners, as I'm not sure the channel is
the right place for them.
* Added improved method to combine multiple HttpChannel Listeners
into a single Listener.
* Fixed MockConnector
* Added benchmark
* Improved benchmark
* Updates from review
* Removed benchmark and alternate implementations.
* Updated javadoc
* Updates from review
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* Issue #3806 async sendError
Avoid using isHandled as a test withing sendError as this can be
called asynchronously and is in a race with the normal dispatch of the
request, which could also be setting handled status.
The ErrorHandler was dispatching directly to a context from within
sendError. This meant that an async thread can call sendError and be
dispatched to within the servlet container at the same time that the
original thread was still dispatched to the container.
This commit fixes that problem by using an async dispatch for error
pages within the ErrorHandler. However, this introduces a new problem
that a well behaved async app will call complete after calling
sendError. Thus we have ignore complete ISEs for the remainder of
the current async cycle.
Fixed the closing of the output after calling sendError. Do not
close if the request was async (and thus might be dispatched to an
async error) or if it is now async because the error page itself is
async.
* updates from review
* better tests
* revert ignore complete
* added some TODOs
* more TODOs
* fixed rename
* cleanup ISE and more TODOs
* refactored to call sendError for uncaught exceptions rather than onError
* more of the refactor
* extra tests for sendError from completing state
Reworked HttpChannelState and sendError so that sendError is now
just a change of state. All the work is done in the ErrorDispatch
action, including calling the ErrorHandler. Async not yet working.
Additional tests
Converted ERRORED state to a separate boolean so it can be used for
both Sync and Async dispatches.
Removed ASYNC_IO state as it was just the same as DISPATCHED
The async onError listener handling is now most likely broken.
WIP making sendError simpler and more tests pass
WIP handling async and thrown exceptions
WIP passing tests
Improved thread handling
removed bad test
Implemented error dispatch on complete properly
more fixed tests
sendError state looks committed
- Added resetContent method to leave more non-content headers during sendError
- Fixed security tests
- simplified the non dispatch error page writing. Moved towards being able to write async
* fixed gzipHandlerTest
* Updated handling of timeout errors. According to servlet spec,
exceptions thrown from onTimeout should not be passed to onError, but
just logged and ignored:
If an exception is thrown while invoking methods in an AsyncListener,
it is logged and will not affect the invocation of any other AsyncListeners.
* This changes several tests.
* Dispatcher/ContextHandler changes for new ERROR dispatch handling. Feels a bit fragile!
* Fixed tests in jetty-servlets
* Fixed tests in jetty-proxy
* more test fixes
* Fixed head handling
reverted unnecessary changes
Improved reason handling
WIP on fully async error handling.
Simplified HttpChannelState state machines to allow for async actions
during completing
more WIP on fully async error handling.
sendError and completion are not both non-blocking, without using
a startAsync operation. However we are lacking unit tests that actually
exercise those code paths.
* Simplified name of states
Added test for async completion
* Cleanups and javadoc
* Cleanups and javadoc
* remove snake case
* feedback from review
* Write error page into fixed pooled buffer
Use the response to get/release a pooled buffer into which the error
page can be written. Make it a fixed sized buffer and if it overflows
then no error page is generated (first overflow turns off showstacks
to save space).
The ErrorHandler badly needs to be refactored, but we cannot change
API in jetty-9
* More test fixes for different error page format
* minor cleanups
* Cleanup from Review
* Fixed javadoc
* cleanups and simplifications
* Cleanup from Review
* renaming and some TODOs
* Cleanup from Review
* Checkstyle fixes
* Cleanup from Review
* Code cleanups and simplifications
* fixed debug
* Cleanup from Review
* Ensure response sent before server shutdown
* removed unnecessary optimisation
* fixed duplicate from merge
* Updates from review
Signed-off-by: Greg Wilkins <gregw@webtide.com>
+ Adds onSelectFailed(Throwable)
+ Adds startSelector()
+ Unit test to demonstrate behavior on both execution
strategies
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
* sanitize xml from multipart upload in MultiPartTest
Signed-off-by: Lachlan Roberts <lachlan@webtide.com>
* changes from review
Signed-off-by: Lachlan Roberts <lachlan@webtide.com>
* no longer echoing back part content
Signed-off-by: Lachlan Roberts <lachlan@webtide.com>
Rename attributes and classes to have a more regular pattern.
The DecoratingListener is now extened by the
CdiDecoratingListener which is used by the cdi-decorate module
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* Issue #3799 Programmatic listeners from ServletContextListeners.
Ensure programmatic listeners added from ServletContextListeners are
called.
Signed-off-by: Jan Bartel <janb@webtide.com>
* Issue #3799 add distribution test
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* Issue #3749 Fix memory leak for AsyncContextListeners with annotations
Also make InjectionCollection and LifeCycleCollection threadsafe for
readers with concurrent modifications.
Signed-off-by: Jan Bartel <janb@webtide.com>
* Removing Legacy Method Separators
* Restyling branch `jetty-9.4.x`
* Applying changes highlighted by checkstyle
* Applying XML restyling
* Fixing XML codestyle for IntelliJ
* Fixing XML style mistakes
* Revert "Applying XML restyling"
* Updating checkstyle for XML codestyle
* Reformatting pom.xml files
* Fixed empty string from line wraps
* Update intellij style to not do expression relative formatting. Reformatted code based on that.
* Increasing line split on Eclipse IDE Formatter to 512
* Restoring setting on internal default value.
+ IntelliJ will not export settings on things that set to their
internal default values.
We want to keep those values as a hedge against future default
value changes in future releases of IntelliJ.
* Fixing intellij codestyle
* do not allow single line simple methods
* misc checkstyle fixes
* re-exported with correct name and all values
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
Signed-off-by: Greg Wilkins <gregw@webtide.com>
+ StringUtil.replace()
+ StringUtil.replaceFirst()
+ StringUtil.sanitizeFileSystemPath()
Change existing usages of String.replace() to either
use new StringUtil.replace() or other methods elsewhere
that better suit that specific need.
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
* upgrade log4j2 version and fix log4j2.xml provided sample, add disruptor if users wants to use async logging
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
+ DeploymentManager will hang onto errors encountered and report them
en-masse if on it's own doStart().
+ Added jetty-deploy test cases.
+ Added test-distribution test case.
+ Updated test-distribution to allow this kind of test case.
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
Introduced SslContextFactory subclasses Client and Server.
Replaced all usages of SslContextFactory with either Client or Server
as required.
Refactored configuration checking so that warnings are not emitted
when non necessary.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Reviewed the implementation.
Got rid of the single channel stored in the HttpClientTransport.
Re-enabled tests on the Unix socket transport.
Updated JNR to 0.22.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* add jdk12 build stage
* test last release of infinispan for jdk12 build
* fix upperBound dependency for jboss logging
* upgrade juniper to 5.4.0 and disable infinispan test if JRE.JAVA_12
* Fixed annotations to exclude any JDK > 11 for 3 tests.
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
+ force attach and use default phase bind (package)
+ fixing some dependencies to build aggregate javadoc jar
+ configure release plugin to build aggregated javadoc jar
+ test javadoc build with jdk11 including aggregated javadoc
+ Fixing bad javadoc
+ Excluding tests from aggregate-javadoc
+ Cannot aggregate-javadoc on CI (requires clean build of snapshot to work)
+ standardizing javadoc config
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
+ FrameFlusher "close" frames are detected during
enqueue and sets the state properly for failing
other frames after it
+ Moving away from Blockhead(Client|Server) to using actual implementations
+ Moved tests to /jetty-websocket-tests/ to be able to use actual impl
for both sides of testcase (client and server)
+ Corrected FrameFlusher terminate/close to not fail the close frame
itself, but only frames that arrive AFTER the close frame.
+ Moving WebSocketCloseTest to jetty-websocket-tests to avoid
using BlockheadClient / BlockheadServer in testing
+ Cleanup of unnecessary modifiers on interface
+ Logging error if @OnWebSocketError is undeclared
+ IOState removed
+ New ConnectionState tracks connection basics in a simpler
method then IOState did.
+ No tracking of Remote close initiated (not needed)
+ IncomingFrames.incomingError() removed
+ Session delegates to Connection for all state changes
+ Errors can be communicated to application multiple times
+ Close is only communicated once
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
Refactored streamers into class Run.
Added javadocs.
Moved "maven.resolver.version" to main POM for consistency.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Updating SslContextFactory configuration for tests, since
the change in the default endPointIdentificationAlgorithm
makes the test failing as the certificates are not valid
for the local host, which is different depending on where
the tests are run (locally, jenkins).
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Fixes Issue #3103 - HttpClient buffer leak found by dump improvements
The leak problem was an additional, unnecessary, call retain() in ResponseNotifier.notifyContent() that was leaking `ByteBuffer`s.
Issue #3018 improve logging and handling of slow data rates.
* Slow data rates now result in aborted channels, but exception is still thrown. Test for 408 in requestLog
* Updated many RequestLog usages to use Server.setRequestLog rather than a RequestLogHandler
* Fixed javadoc
* removed BadRequestLogHandlerTest (tested in RequestLogTest)
* added JMH to show the future of request logging for #113
* copyright header.
* Updates from review
* Revert to throwing BadMessageException
* BME ensures a 408 is logged rather than a 500
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* Cleanup the dump implementation
* improved the clarity of utility methods for dump and updated most dump methods
* fixed upgrade filter dump
* Improved dump after review
* Moved dumpObjects to Dumpable
* implemented dumpBeans with dumpObjects
* less verbose dump
* Dump streams
* fixed dump test
Signed-off-by: Greg Wilkins <gregw@webtide.com>
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Reviewed other possible places where max local stream count may
overflow.
Fixed handling of HTTP/2 stream idle timeouts.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Introduced --jpms option in jetty-start to run Jetty from the module-path.
Introduced [jpms] sections in *.mod files, to specify JPMS command line
options that needs to be added to the command line generated by jetty-start.
Bumped java.transaction-api to 1.3 because it has Automatic-Module-Name.
Fixed ASM version lookup using ManifestUtils.
Fixed WebInfConfiguration.findAndFilterContainerPaths() to properly
scan the module-path, which may contain both files and directories.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
+ Changes needed for new Junit 5
+ Migrating from Vintage junit API to Jupiter junit API
+ Relies on SNAPSHOT jetty-test-helper
- this will be a formal release once this issue has been
resolved satisfactory
+ Have jenkins always pull latest SNAPSHOT for each build
+ Adding jetty.snapshots repository
+ Using surefire 2.22.0 per advice from junit
+ Ensuring <reuseForks>true</reuseForks> to work around issue junit-team/junit5#801
+ Disabling <forkMode>always</forkMode> in maven-surefire-plugin
due to bug https://github.com/junit-team/junit5/issues/801
+ OSGi tests must remain at vintage due to PaxExam
+ Moving from vintage TestingDir to jupiter WorkDir
+ Fixing imports to use jupiter, not vintage
+ Migrating vintage ExpectedException to jupiter assertThrows
+ Migrating vintage TestName to jupiter TestInfo
+ Migrating @RunWith(Parameterized.class)
to @ParameterizedTest with Argument Sources
+ Migrating assertTrue(val.contains(needle))
to assertThat(val, containsString(needle))
+ Aligning junit versions per recommendations from @sormuras
+ Adjusting parameter order change for assertEquals()
+ Test LifeCycle Annotation Migration
junit 4 | junit 5 / jupiter
------------ | -----------
@Before | @BeforeEach
@After | @AfterEach
@BeforeClass | @BeforeAll
@AfterClass | @AfterAll
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
Issue #2711 - TLS 1.3 compliance.
Disabled few tests that are TLS 1.2 specific.
Renegotiation in SslConnection is now skipped for TLS 1.3.
Replaced SNI keystore DSA certificate with RSA certificate.
First full build achieved with JDK 11+28.
Small changes after review.
Modified the test case to pass in JDK 8, where the implementation
throws SSLException, while in later JDKs throws SSLHandshakeException.
Minor cleanup
Signed-off-by: Greg Wilkins <gregw@webtide.com>
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Issue #2468 - Remove SoLinger.
For non-blocking sockets, StandardSocketOptions#SO_LINGER javadocs
report that the behavior is undefined. In JDK 11 setting SoLinger
for non-blocking sockets will be ignored.
As such, there is no point in allowing SoLinger to be configured
in Jetty that only uses non-blocking sockets.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Tests in SaveOptimizeTest were checking if the last time the SessionData had been saved was greater than it was before
if the second save occured on the same millisecond as the first it failed the assertion
now counting how many times the SessionData has been saved instead of when it was saved
Added memory barriers to TestContextScopeListener and TestSessionDataStore as they are being accessed from multiple different threads in the test
Signed-off-by: Lachlan Roberts <lachlan@webtide.com>
* Fixes#2616 - Trailers preventing client from processing all the data.
Trailer handling was erroneously firing the response success event
before all the response content events happened.
Now the trailer handling uses a poison-pill DATA frame to make sure that
all response content events happen before the response success event.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
HttpClient was confused by servers that responded
with two 100 Continue in the same HTTP conversation.
Now, whether the 100 Continue response has been handled
already is stored per-request, not per-conversation.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Support root base or home for quickstart #2446
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* Issue #2446 - Root as base for quickstart
+ Adding more tests for differences we have to resolve
with windows vs linux root path differences.
and URI's that have an authority vs those without an authority.
without authority examples:
file:/code/
file:/C:/code/
with authority examples:
file:///code/
file:///C:/code/
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
* Using the canonical URI passes all the tests on linux, but I still have some concerns with the whole approach
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* minor cleanups
Signed-off-by: Greg Wilkins <gregw@webtide.com>
* Handle windows URIs
Because a windows like `file:///F:/` has a path of `/F:/`, then it is OK to strip the trailing `/`, so the
expected normalized value can be `file:///F:`.
Signed-off-by: Greg Wilkins <gregw@webtide.com>
## SearchPattern
New class which does a fast search for patterns within strings and arrays of bytes using an implementation of the Boyer–Moore–Horspool algorithm. This was written to be used in the new MultiPartParser class to search for delimeter boundaries.
## MultiPartParser
New class which uses the SearchPattern to parse a MultiPart Mime given a ByteBuffer. Written in a non-blocking style so can be used asynchronously (although not currently be being used this way).
## MultiPartFormInputStream
New class which uses the MultiPartParser to parse a MultiPart Mime input stream into a Collection of Parts. This class is in org/eclipse/jetty/http and is designed to replace org/eclipse/jetty/util/MultiPartInputStreamParser.
## MultiPartInputStreamParser and Non Compliances
This class has been deprecated and replaced by org.eclipse.jetty.http.MultiPartFormInputStream. It accepts formats non compliant with the RFC that the new MultiPartFormInputStream does not accept. When this occurs violations are recorded by the method getNonComplianceWarnings().
## MultiParts
New interface to allow switching between the different implementations. This allows MultiParts to function in two different modes. The LEGACY implementation using the UTIL parser which may parse forms containing non compliances with the RFC, and the RFC7578 implementation using the new and faster HTTP parser. This file contains the implementations of MultiParts for HTTP and UTIL parsers as nested classes which are used by Request.
## Request
Changed to use the new MultiParts interface instead of the MultiPartInputStreamParser class. with a method called newMultiParts which will construct a MultiPart using one of the HTTP or UTIL implementations depending on what compliance mode is set.
## Jetty Test Webapp Dump Servlet
Code added to display parts while running the dump test webapp if MuliPart form is submitted.
## MultiPartBenchMark
JMH Benchmark of the HTTP multipart parser vs the UTIL multipart parser.
testLargeGenerated parses a 10MB file of random binary data.
testParser parses a series of small multipart forms captured by a browser.
```
# Run complete. Total time: 00:02:09
Benchmark (parserType) Mode Cnt Score Error Units
MultiPartBenchmark.testLargeGenerated UTIL avgt 10 0.252 ± 0.025 s/op
MultiPartBenchmark.testLargeGenerated HTTP avgt 10 0.035 ± 0.004 s/op
MultiPartBenchmark.testParser UTIL avgt 10 0.028 ± 0.005 s/op
MultiPartBenchmark.testParser HTTP avgt 10 0.015 ± 0.006 s/op
```
* Issue #2231 WIP
* Issue #2231 Add tests for FileSessionDataStore and MongoSessionDataStore.
* Issue #2231 create unit tests for every SessionDataStore
Signed-off-by: Jan Bartel <janb@webtide.com>
* Issue #2231 Refactor session tests
Signed-off-by: Jan Bartel <janb@webtide.com>
* Issue #2231 Refactor and cleanup session tests.
Signed-off-by: Jan Bartel <janb@webtide.com>
* hazelcast tests faster
Signed-off-by: olivier lamy <olamy@webtide.com>
* make hazelcasts tests even faster
Signed-off-by: olivier lamy <olamy@webtide.com>
* cleanup comments
Signed-off-by: olivier lamy <olamy@webtide.com>
* run mongodb test in embdedded mode
Signed-off-by: olivier lamy <olamy@webtide.com>
* mongodb embedded test enabled per default
Signed-off-by: olivier lamy <olamy@webtide.com>
* Issue #2231 more session tests
Signed-off-by: Jan Bartel <janb@webtide.com>
* fix mongodb embedded tests
Signed-off-by: olivier lamy <olamy@webtide.com>
* cleanup code
Signed-off-by: olivier lamy <olamy@webtide.com>
* use Logger rather than System.err.println
Signed-off-by: olivier lamy <olamy@webtide.com>
* Issue #2231 Add test for DefaultSessionCache
Signed-off-by: Jan Bartel <janb@webtide.com>
* Issue #2231 Redisable mongo tests by default.
Signed-off-by: Jan Bartel <janb@webtide.com>
* fix issue with empty local repo build
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* jenkins should run mongodb tests
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* build this plugin last so we should not hit the maven invoker plugin
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* build test first for this one
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* use invoker plugin 3.0.2-SNAPSHOT as there is a fix for https://issues.apache.org/jira/browse/MINVOKER-191
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
* temporary use of apache snapshots repository because of maven-invoker-plugin 3.0.2-SNAPSHOT
Signed-off-by: olivier lamy <oliver.lamy@gmail.com>
Introduced ConnectionPool.Multiplexable for connection pools that support multiplexing.
Reworked RoundRobinConnectionPool to support multiplexing.
Moved tests to test RoundRobinConnectionPool with both HTTP/1.1 and HTTP/2.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
- Speculative fix to ensure that the users of the jetty-distribution
do not require the test artifacts to utilize the tarball / zip files
- Also disabled the snapshot repository as it causes false success
- Adding now unreferenced dependency
Signed-off-by: Joakim Erdfelt <joakim.erdfelt@gmail.com>
+ Testing deploy modes: [Initial, Delayed]
"Initial" is a deploy where the webapps exist
in the monitored directory at startup.
"Delayed" is a deploy where the Server is already
started when a new webapp is added to the monitored
deployment directory.
+ Webapp types: [Unavailable: True, False]
This is the WebAppContext.isThrowUnavailableOnStartupException
setting.
+ New DeploymentManager Node[FAILED] to assign to webapps that
fail the deployment during the "Delayed" deployment scenario.
Useful as a binding for hooking into failed deployments.
There are still problems with this impl (some client tests ignored) and there is still a work around for the JNR bug 50, however this impl is already much better than the unix socket support that is already in the release. So will merge for now and put more effort in once there is a JNR fix.
* WIP add unix domain sockets support in HttpClient
* move unix socket client part to unix socket module #2014
* some cleanup #2014
* add missing headers #2014
* add TODO
* UnixSocket client refactor
* cleanup test and pom
* minor changes, use LOG.isDebugEnabled() before using debug method
* add UNIX SOCKET http client test with all other tests, push this to see what happen on Jenkins
* fix some unit tests
* fix more tests
* fix load test
* UnixSocket client
* Demonstrate JNR bug
* Worked around JNR bug 50
* close channel on client side as well
* more details in log
* log file path as well
* #2014 disable test per default as doesn't work on some environement
* Revert "#2014 disable test per default as doesn't work on some environement"
* test only on unix
* Allow test of specific transport(s)
* Move unix socket to /tmp
* move test socket to /tmp
* move test socket to /tmp
* ignore failing tests for now
* fix bean name and possible to use sys prop org.eclipse.jetty.http.client.AbstractTest.Transports with mvn cli
* test isBlank as surefire props is not null
* correctly create tmp file with @Before
* do not delete file
* use /tmp as build directory doesn't seem to work within docker...
* do not delete sock file on client as it is own by the server
* file must not exist when binding unix socket
* #2014 fix license header
* network specific tests assumed
* Fixed to handle null selector keys
* add assume for tests that assume a network connector
Signed-off-by: olivier lamy <olamy@webtide.com>
Signed-off-by: Greg Wilkins <gregw@webtide.com>
+ AbstractLifeCycle.setFailed(Throwable) is now protected, so
that the odd usages from WebAppContext.doStart() can be supported
+ The AbstractLifeCycle.doStart() now checks for state == FAILED
* Scalable scheduler changes for #1918
* Added HttpChannel.destroy to destroy CyclicTimer
* fixed rebase with HttpConnectionOverFCGI
* renamed to acquire
* Destroying the HttpChannel consistently in all transports.
* updated headers
* cleanup after final review
Signed-off-by: Greg Wilkins <gregw@webtide.com>
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Removed the distinction between pushed and non-pushed channels; only
non-pushed channels are released and recycled if they're not failed.
Properly resetting HttpReceiverOverHTTP2.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Issue #2081 No idle timeout exception when dispatch is delayed
* Delegate the readtimeout handling to HttpChannel so that a delayed dispatch can be ended.
* Added unit test for delayed dispatch idle
* Now using HttpInput.onIdleTimeout() to fail the HttpInput, and then dispatching the request in case it has not been dispatched yet. This ensure consistent behavior independently of the value of HttpConfiguration.delayDispatchUntilContent.
* Fixed for both HTTP/1.1 and HTTP/2.
* Added tests for non-blocking reads.
Signed-off-by: Greg Wilkins <gregw@webtide.com>
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Code cleanups.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Improved test case handler.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Improved exception message.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Issue #1973 - Implement minimum response data rate.
Implemented response content data rate control in HttpOutput.
Introduced a WriteFlusher.Listener interface that produces events
for every flush(). These events are forwarded to the Connection
and from there to the HttpOutput so that the data rate control can
be enforced.
Both HTTP/1.1 and HTTP/2 are implemented.
Data rate control for HTTP/1.1 is approximate because it will count
also headers bytes and the chunk bytes, while for HTTP/2 is precise.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
* Issue #1973 - Implement minimum response data rate.
Addressed review comments.
Signed-off-by: Simone Bordet <simone.bordet@gmail.com>
Signed-off-by: olivier lamy <olamy@webtide.com>
use a randomized map name to store sessions in order to avoid conflicts
Signed-off-by: olivier lamy <olamy@webtide.com>
reduce hazelcast logging noise
Signed-off-by: olivier lamy <olamy@webtide.com>
clarify onlyClient mode
Signed-off-by: olivier lamy <olamy@webtide.com>
Session.getMaxInactiveInterval should return a negative number if the
the session is configured with a negative maxInactiveInterval. It was
being rounded up to 0 by mistake.
Signed-off-by: Dan Smith <upthewaterspout@apache.org>
康智冬
Joakim Erdfelt
Jan Bartel
Greg Wilkins
Olivier Lamy
Lachlan
Simone Bordet
Michael Hausegger
Olivier Lamy
Jesse McConnell
Kazuhiro Sera
olivier lamy
Dan Smith
WalkerWatch