Add a new `hooked_block_{$block_type}` filter that allows modifying a hooked block (in parsed block format) prior to insertion, while providing read access to its anchor block (in the same format).
This allows block authors to e.g. set a hooked block's attributes, or its inner blocks; the filter can peruse information about the anchor block when doing so. As such, this filter provides a solution to both #59572 and #60126.
The new filter is designed to strike a good balance and separation of concerns with regard to the existing [https://developer.wordpress.org/reference/hooks/hooked_block_types/ `hooked_block_types` filter], which allows addition or removal of a block to the list of hooked blocks for a given anchor block -- all of which are identified only by their block ''types''. This new filter, on the other hand, only applies to ''one'' hooked block at a time, and allows modifying the entire (parsed) hooked block; it also gives (read) access to the parsed anchor block.
Props gziolo, tomjcafferkey, andrewserong, isabel_brison, timbroddin, yansern.
Fixes#59572, #60126.
Built from https://develop.svn.wordpress.org/trunk@57354
git-svn-id: http://core.svn.wordpress.org/trunk@56860 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The biggest tradeoff that was made in the implementation of Block Hooks was that they were limited to layouts (i.e. templates, template parts, and patterns) that ''didn't have any user modifications'' (see #59313 for the reason). This changeset is a preparatory step to remove this limitation, so they’ll eventually also work with user-modified layouts.
The crucial problem to solve is how to acknowledge that a user has opted to remove or persist a hooked block, so that the auto-insertion mechanism won't run again and inject an extraneous hooked block on the frontend when none is solicited.
This is achieved by storing all known blocks hooked to a given anchor block in the `metadata` attribute on that anchor block; specifically in a field called `ignoredHookedBlocks` inside of the `metadata`. Hooked blocks are only rendered on the frontend if they're absent from that field; OTOH, they're injected into that field (via the REST API) when first loaded in the editor.
This simple logic guarantees that once a user modifies a given layout, those changes are respected on the frontend; yet if a plugin that includes a hooked block is activated after those modifications have taken place, the hooked block will be rendered on the frontend. This new technique supplants the one previously used (i.e. rendering hooked blocks on the frontend only if a layout doesn't have any modifications) in a rather direct way.
Note that this changeset only introduces the new metadata field and relevant logic; it does not yet enable hooked block insertion into modified layouts. That will be done in a subsequent step (see #59646).
Props gziolo.
Closes#60008.
Built from https://develop.svn.wordpress.org/trunk@57157
git-svn-id: http://core.svn.wordpress.org/trunk@56668 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Documents the 4 new 6.4 Block Hooks global functions as private and for Core-only internal usage:
* `make_before_block_visitor()`
* `make_after_block_visitor()`
* `traverse_and_serialize_block()`
* `traverse_and_serialize_blocks()`
This is being done as the architectural design of these new functions may change in the next cycle. Further denoting them as private / Core only can help to avoid extender churn if any of these functions are deprecated.
Follow up to [56649], [56620].
Props azaozz, hellofromTonya, bernhard-reiter, gziolo, mikeschroder.
Fixes#59783.
See #59313.
Built from https://develop.svn.wordpress.org/trunk@57066
git-svn-id: http://core.svn.wordpress.org/trunk@56577 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The callbacks returned by `make_before_block_visitor` and `make_after_block_visitor`, respectively, (which are passed as arguments to `traverse_and_serialize_block(s)`) currently accept three arguments, all of which are block arrays (i.e. with properties `blockName`, `attrs`, etc.):
- A ''reference'' to the block they're currently visiting, `&$block`;
- the block's `$parent_block`; and
- the `$prev`ious block (for `make_before_block_visitor`), or the `$next` block (for `make_after_block_visitor`), respectively.
Those arguments are passed to the "block visitor" callbacks by `traverse_and_serialize_block(s)` during traversal. The block that the callback is currently visiting is passed ''by reference'' to allow modifying it, which is e.g. used to inject the `theme` attribute into Template Part blocks.
One major limitation of Block Hooks is that they currently only work with templates, parts, and patterns that ''don't have any user modifications'' (i.e. that come straight from the corresponding theme files, rather than from the database). For WordPress 6.5, it is planned to change that to make Block Hooks work for templates, parts, and patterns that ''do'' have user modifications: #59646.
This will be implemented by storing an attribute on the "anchor" block. While working on that feature, it was found that the aforementioned callbacks will need to modify not only the currently visited `$block`, but also the `$parent_block` -- i.e. that the latter argument needs to be passed by reference as well. This is consistent with the requirement of adding an attribute to an anchor block, as it's not only the currently visited block that can serve as an anchor block (in the case of `before` or `after` sibling insertion), but also its parent (for `first_child` and `last_child` insertion).
If the `$parent_block` argument were to be changed to become a reference in a later WordPress version, this could be considered a backwards-compatibility breaking change. For this reason, this change is instead proposed for 6.4 already, which is the cycle during which the relevant functions were first introduced. This should have no impact on existing code, since nothing currently relies on `$parent_block` remaining unmodified by the respective callback, nor is anything currently modifying that argument.
Props hellofromTonya.
Fixes#59776.
Built from https://develop.svn.wordpress.org/trunk@57038
git-svn-id: http://core.svn.wordpress.org/trunk@56549 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This makes it possible to register a block by passing an array of arguments, without the presence of a `block.json` file.
Follow-up to [48141], [49948].
Props aristath, spacedmonkey, mukesh27, costdev, audrasjb, oglekler, felipeelia, hellofromTonya.
Fixes#56865.
Built from https://develop.svn.wordpress.org/trunk@57026
git-svn-id: http://core.svn.wordpress.org/trunk@56537 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Both the `$pre_callback` and `$post_callback` functions that are given as arguments to `traverse_and_serialize_block(s)` receive a reference to the current block as their first argument. However, while any changes that the "pre" callback makes to the block are reflected by the serialized markup, the same wasn't true for the "post" callback: Any changes that it made were only applied ''after'' the block had already been serialized.
This commit changes the behavior such that `$post_callback`'s changes to the current block are also reflected in the serialized markup.
See #59646.
Props gziolo.
Fixes#59669.
Built from https://develop.svn.wordpress.org/trunk@56970
git-svn-id: http://core.svn.wordpress.org/trunk@56481 1a063a9b-81f0-0310-95a4-ce76da25c4cd
It was found that Template Part blocks were broken in the Site Editor, showing the `Template part has been deleted or is unavailable` message, due to a missing `theme` attribute.
This bug seems to have been introduced by [56896], whose goal was to only inject that attribute into the markup returned by the templates and patterns REST API endpoints but not on the frontend, in order to improve performance. It has been demonstrated locally that reverting that changeset fixes the bug.
Reverts [56896].
Props mmcalister, swisspidy, thelovelist, hellofromTonya, pbiron, Pauthake015, richtabor, nicolefurlan, huzaifaalmesbah, annezazu, kafleg, aegkr, sunitarai, shresthaaman, andraganescu, onemaggie, gziolo.
Fixes#59629.
Built from https://develop.svn.wordpress.org/trunk@56960
git-svn-id: http://core.svn.wordpress.org/trunk@56471 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Having the patterns registry inject the `theme` attribute into all Template Part blocks inside every pattern was found to negatively impact performance. It turns out that it's only required for the editor (i.e. in the REST API) but not on the frontend; there, it's instead possible to fall back to the currently active theme.
The latter change was made to the Pattern and Template Part blocks in https://github.com/WordPress/gutenberg/pull/55217, which was sync'ed to Core in [56849]. Consequently, this changeset removes `theme` attribute insertion from the frontend.
Props flixos90, gziolo, dmsnell, hellofromtonya.
Fixes#59583.
Built from https://develop.svn.wordpress.org/trunk@56896
git-svn-id: http://core.svn.wordpress.org/trunk@56407 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prior to this changeset, `get_hooked_blocks` was called four times ''for every parsed block'' in each template, template part, and pattern. With this changeset applied, `get_hooked_blocks` is called only once per template, template part, or pattern.
Additionally, `get_hooked_blocks` is called only once when returning the list of all registered patterns. (The latter modification brings the implementation closer to its state prior to Block Hooks.)
Finally, when there are no registered hooked blocks or `hooked_block_types` filters, parsing, hooked block insertion, and re-serializing is skipped altogether.
Props gziolo, flixos90, joemcgill, dmsnell, spacedmonkey, hellofromtonya.
Fixes#59383.
Built from https://develop.svn.wordpress.org/trunk@56805
git-svn-id: http://core.svn.wordpress.org/trunk@56317 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In the context of register_block_script_handle, the get_block_asset_url function may return false when an empty string is provided as the input. This behavior is intended to prevent the generation of invalid URLs. However, when the script loading strategy is set to "defer" while passing false, it triggers a "doing it wrong" message.
This situation becomes problematic, especially for scenarios where the scripts haven't been built yet. In such cases, the realpath call returns an empty string because the file doesn't exist. To address this issue, we now perform a simple check to ensure that the script URI is not empty before applying the "defer" loading strategy. This adjustment prevents unnecessary deferral of loading for scripts with empty URIs.
Follow on from [56683] and [56033].
Props kebbet, mukesh27, swissspidy, westonruter, spacedmonkey.
Fixes#59475
Built from https://develop.svn.wordpress.org/trunk@56744
git-svn-id: http://core.svn.wordpress.org/trunk@56256 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`_wp_array_get()` is an expensive function, and it's called thousands of times on each page view on the front end. While the function performance was slightly improved in #58376, it is still called more times than it should be.
This commit aims to further optimize its usage:
* In many cases, `_wp_array_get()` can be replaced with a much simpler and faster `isset()` check.
* The `isset()` function is capable of checking nested arrays, so `isset( $foo['a']['b']['c'] )` will return false even if `$foo['a']` is unset, without throwing any errors or warnings.
* When `_wp_array_get()` cannot be directly replaced with `isset()`, it would be good practice to wrap it in an `isset()` function so that `_wp_array_get()` only runs when it needs to.
Original PR from Gutenberg repository:
* [https://github.com/WordPress/gutenberg/pull/51116#51116 Performance improvement: Reduce the use of the _wp_array_get() function]
Follow-up to [55851], [56382].
Props aristath, jrf, spacedmonkey, mukesh27, swissspidy, hellofromTonya.
Fixes#59405.
Built from https://develop.svn.wordpress.org/trunk@56709
git-svn-id: http://core.svn.wordpress.org/trunk@56221 1a063a9b-81f0-0310-95a4-ce76da25c4cd
All existing calls of `get_hooked_blocks()` in non-test code are currently wrapped in an extra `array_keys()` call. This changeset absorbs that logic into the function and changes the structure of the return value accordingly.
Furthermore, this allows us to remove the extra `$relative_position` argument (introduced in [56673]) from the function again, as the same data can now be simply fetched via array access.
Props gziolo, spacedmonkey, mukesh27.
See #59383.
Built from https://develop.svn.wordpress.org/trunk@56704
git-svn-id: http://core.svn.wordpress.org/trunk@56216 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This commit introduces a valuable utility function, get_block_asset_url, designed to simplify the retrieval of block asset URLs, such as those for CSS and JavaScript files. This utility eliminates redundancy in both register_block_script_handle and register_block_style_handle. Additionally, `get_block_asset_url` incorporates an early exit mechanism to optimize performance.
This update includes comprehensive unit tests, covering various scenarios, including asset registration from core (wp-includes), themes, child themes, plugins, and mu-plugins.
Props spacedmonkey, joemcgill, flixos90, gziolo.
Fixes#58525.
Built from https://develop.svn.wordpress.org/trunk@56683
git-svn-id: http://core.svn.wordpress.org/trunk@56195 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [50761], the block_has_support function was introduced. However, using `property_exists` within this function negatively impacted its performance. This commit replaces the `property_exists` function call with `instanceof WP_Block_Type`, resulting in improved performance.
Props mukesh27, gziolo, spacedmonkey.
Fixes#59441.
Built from https://develop.svn.wordpress.org/trunk@56678
git-svn-id: http://core.svn.wordpress.org/trunk@56190 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [56610], the get_hooked_blocks function was introduced. However, using property_exists within this function negatively impacted its performance. This commit replaces the property_exists function call with instanceof WP_Block_Type, resulting in improved performance.
Props gziolo, spacedmonkey.
See #59383.
Built from https://develop.svn.wordpress.org/trunk@56677
git-svn-id: http://core.svn.wordpress.org/trunk@56189 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Per discussion in #59424, there's agreement that the new `hooked_block_types` filter (introduced in [56673]) covers conditional addition and removal of hooked blocks better and at a higher level than the `inject_hooked_block_markup` filter that was originally added in [56649] for that same purpose.
Consequently, this changeset removes the latter filter.
Props gziolo.
Fixes#59439.
Built from https://develop.svn.wordpress.org/trunk@56674
git-svn-id: http://core.svn.wordpress.org/trunk@56186 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Block Hooks allow a third-party block to specify a position relative to a given block into which it will then be automatically inserted (e.g. a "Like" button block can ask to be inserted after the Post Content block, or an eCommerce shopping cart block can ask to be inserted after the Navigation block).
The underlying idea is to provide an extensibility mechanism for Block Themes, in analogy to WordPress' [https://developer.wordpress.org/plugins/hooks/ Hooks] concept that has allowed extending Classic Themes through filters and actions.
The two core tenets for Block Hooks are:
1. Insertion into the frontend should happen right after a plugin containing a hooked block is activated (i.e. the user isn't required to insert the block manually in the editor first); similarly, disabling the plugin should remove the hooked block from the frontend.
2. The user has the ultimate power to customize that automatic insertion: The hooked block is also visible in the editor, and the user's decision to persist, dismiss (i.e. remove), customize, or move it will be respected (and reflected on the frontend).
To account for both tenets, the **tradeoff** was made to limit automatic block insertion to unmodified templates (and template parts, respectively). The reason for this is that the simplest way of storing the information whether a block has been persisted to (or dismissed from) a given template (or part) is right in the template markup.
To accommodate for that tradeoff, [https://github.com/WordPress/gutenberg/pull/52969 UI controls (toggles)] are being added to increase visibility of hooked blocks, and to allow for their later insertion into templates (or parts) that already have been modified by the user.
For hooked blocks to appear both in the frontend and in the editor (see tenet number 2), they need to be inserted into both the frontend markup and the REST API (templates and patterns endpoints) equally. As a consequence, this means that automatic insertion couldn't (only) be implemented at block ''render'' stage, as for the editor, the ''serialized'' (but ''unrendered'') markup needs to be modified.
Furthermore, hooked blocks also have to be inserted into block patterns. Since practically no filters exist for the patterns registry, this has to be done in the registry's `get_registered` and `get_all_registered` methods.
Props gziolo.
Fixes#59313.
Built from https://develop.svn.wordpress.org/trunk@56649
git-svn-id: http://core.svn.wordpress.org/trunk@56161 1a063a9b-81f0-0310-95a4-ce76da25c4cd
During work on #59399, it was discovered that ''sibling'' block insertion wasn't likely going to work the way it was planned, which required devising an alternative solution. This new solution requires some changes to `traverse_and_serialize_block(s)`:
- Change the signature of the existing callback such that:
- the return value is a string that will be prepended to the result of the inner block traversal and serialization;
- the function arguments are: a ''reference'' to the current block (so it can be modified inline, which is important e.g. for `theme` attribute insertion), the parent block, and the previous block (instead of the block index and chunk index).
- Add a second callback argument to `traverse_and_serialize_block(s)`, which is called ''after'' the block is traversed and serialized.
- Its function arguments are a reference to the current block, the parent block, and the next block.
Props gziolo.
Fixes#59412. See #59313.
Built from https://develop.svn.wordpress.org/trunk@56644
git-svn-id: http://core.svn.wordpress.org/trunk@56156 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [56618], three functions (`insert_inner_block`, `prepend_inner_block`, and `append_inner_block`) were introduced. They were meant to be used for insertion of hooked blocks; however, it was discovered that the original idea wouldn't work for sibling insertion. Instead, a different approach will be taken (see #59412), and these functions are no longer needed and can thus be removed.
Reverts [56618].
See #59412, #59385, #59313.
Built from https://develop.svn.wordpress.org/trunk@56634
git-svn-id: http://core.svn.wordpress.org/trunk@56146 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Introduces two new functions `traverse_and_serialize_blocks` and `traverse_and_serialize_block` with the additional `$callback` argument. It is possible to pass parent block, block index, chunk index to the callback argument.
Reverts changes applied to `serialize_blocks` and `serialize_block` in #59327 with [56557].
Props ockham, mukesh27.
See #59313.
Built from https://develop.svn.wordpress.org/trunk@56620
git-svn-id: http://core.svn.wordpress.org/trunk@56132 1a063a9b-81f0-0310-95a4-ce76da25c4cd
For #59313, we need to implement functions to insert a given parsed block into another parsed block's inner blocks, and to prepend and append to that array, respectively.
We will use those functions in combination with `traverse_and_serialize_blocks` (see #59327) to implement automatic insertion of hooked blocks into block templates and patterns.
Props gziolo.
Fixes#59385.
Built from https://develop.svn.wordpress.org/trunk@56618
git-svn-id: http://core.svn.wordpress.org/trunk@56130 1a063a9b-81f0-0310-95a4-ce76da25c4cd
All blocks relevant for the excerpt are already being parsed in `excerpt_remove_blocks()`. Therefore running `do_blocks()` on the post content only to create the excerpt is unnecessary and wasteful from a performance perspective.
Props thekt12, spacedmonkey, mukesh27, joemcgill.
Fixes#58682.
Built from https://develop.svn.wordpress.org/trunk@56560
git-svn-id: http://core.svn.wordpress.org/trunk@56072 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Allow passing a function callback to serialize_block(s) that is invoked on each node in the tree of parsed blocks as it is traversed for serialization.
A function argument was chosen for passing the callback function as it reflects a pattern familiar from other algorithms that apply a given callback function while traversing a data structure -- most notably PHP's own `array_map()`.
Introducing a filter was considered as an alternative but ultimately dismissed. For a fairly low-level and general-purpose function such as `serialize_block()`, using a filter to pass the callback seemed risky, as it also requires ''removing'' that filter after usage in order to prevent the callback from being accidentally applied when `serialize_block()` is called in an entirely different context.
Introducing a separate function for applying a given operation during tree traversal (i.e. independently of serialization) was also considered but dismissed, as it would unnecessarily duplicate tree traversal.
Props dlh, gziolo.
Fixes#59327. See #59313.
Built from https://develop.svn.wordpress.org/trunk@56557
git-svn-id: http://core.svn.wordpress.org/trunk@56069 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Previously, in `register_block_script_handle()` the `$script_uri` variable initialized with a `plugins_url()` call that was reported to invoke four times. In this patch the var is initialized as a blank string with a fallback to use the `plugins_url()` if the other intended conditions are not met.
Props mukesh27, daxelrod, adamsilverstein, davidbaumwald.
Fixes#59181.
Built from https://develop.svn.wordpress.org/trunk@56455
git-svn-id: http://core.svn.wordpress.org/trunk@55967 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Most block feature checks are for a single feature string, and for such cases it is not intuitive to require an array for the `$feature` parameter of the `block_has_support()` function.
This changeset brings it in line with other functions like `post_type_supports()`, allowing to pass a string for the `$feature`. An array is still supported for more complex cases where support for sub-features needs to be determined. This change furthermore includes a very minor performance tweak by avoiding calls to the `_wp_array_get()` function if a single feature string is being checked for.
Props thekt12, nihar007, mukesh27, swissspidy.
Fixes#58532.
Built from https://develop.svn.wordpress.org/trunk@56382
git-svn-id: http://core.svn.wordpress.org/trunk@55894 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset fixes both `register_block_script_handle()` and `register_block_style_handle()` functions, allowing for child themes to access and utilise
blocks defined in parent themes.
Previously these functions could not handle blocks registered in Parent themes. This changeset fixes the issue by determining whether the given asset path
belongs to either of the template or stylesheet directories (Parent and Child themes respectively) as opposed to just checking using
`get_theme_file_path('')`.
Props jacknotman, Levdbas, audrasjb, guillaumeturpin, leprincenoir, whaze, isabel_brison.
Fixes#57566.
--Cette ligne, et les suivantes ci-dessous, seront ignorées--
M trunk/src/wp-includes/blocks.php
Built from https://develop.svn.wordpress.org/trunk@56183
git-svn-id: http://core.svn.wordpress.org/trunk@55695 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset adds handler for multiple cases where author data can be passed to the Query Block:
- array: array of author ids
- string: comma separated author ids
- integer: single author id
Props adi3890, costdev, mayur8991, oglekler.
Fixes#58426.
Built from https://develop.svn.wordpress.org/trunk@56109
git-svn-id: http://core.svn.wordpress.org/trunk@55621 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In [52069] the function `wp_common_block_scripts_and_styles` was changed load individual theme stylesheets, if the current theme supports block styles and loading separate core block assets. To do this, the function calls many expensive file operation functions, such as `glob`, `file_exists` and `file_get_contents`. This is wasteful, as these functions are loaded on every page request, even request that do not include blocks, like REST API calls. In [56044] all core block styles are registered in a single place. In `register_core_block_style_handles` calls `glob` to get all css styles in block directories. While registering style and editor styles, also register block theme styles, under a new style handle. Example `wp-block-avatar-theme`. If the current theme supports block styles, also request the block to enqueue the theme style on the front end. As these new stylesheets have a path attribute set, the function `wp_maybe_inline_styles` will automatically inline the styles for you.
Props spacedmonkey, flixos90, oandregal, costdev, audrasjb, mukesh27.
Fixes#58560.
Built from https://develop.svn.wordpress.org/trunk@56064
git-svn-id: http://core.svn.wordpress.org/trunk@55576 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Register all core blocks in a new function called `register_core_block_style_handles`. This mirrors the function `wp_default_styles` where all core styles are registered in one place. This improves block registration performance, as it avoids expensive file lookups, like realpath in `register_block_style_handle`. The new function `register_core_block_style_handles` uses `glob` to get all css files in the blocks directory. This glob is cached in a transient to save lookups on subsequent requests. The function `register_block_style_handle` now checks to see if the style handle is already registered before trying to register it again.
Props mukesh27, westonruter, flixos90, joemcgill, spacedmonkey.
Fixes#58528.
Built from https://develop.svn.wordpress.org/trunk@56044
git-svn-id: http://core.svn.wordpress.org/trunk@55556 1a063a9b-81f0-0310-95a4-ce76da25c4cd
gziolo
Sergey Biryukov
Bernhard Reiter
hellofromTonya
desrosj
Aaron Jorbin
spacedmonkey
Felix Arntz
Andrew Ozz
antpb
Weston Ruter
isabel_brison
audrasjb