Improve the performance of `WP_List_Table::get_column_info()` by adding the primary column to the cached header values. This reduces the number of calls to the `WP_List_Table::get_primary_column_name()` method to once per table in line with the other header getter functions.
Props bobbingwide, chaion07, costdev, mikeschroder, mukesh27, peterwilsoncc, shetheliving, spacedmonkey.
Fixes#34564.
Built from https://develop.svn.wordpress.org/trunk@53868
git-svn-id: http://core.svn.wordpress.org/trunk@53427 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* `WP_Filesystem_FTPext::exists()`
* `WP_Filesystem_FTPext::size()`
* `WP_Filesystem_ftpsockets::exists()`
The `::exists()` methods were previously using the FTP `NLST` command, which works for directories, but is not intended to be applied to a file. This only worked most of the time due to many FTP servers being permissive and allowing to execute `NLST` on files, which cannot be guaranteed and appears to not be the case in newer versions of Pure-FTPd (1.0.48 or later).
With a recent change in [53860], both methods were updated for compatibility with RFC 959:
* Both methods check if the path is a directory that can be changed into (and therefore exists).
* `WP_Filesystem_FTPext` uses `ftp_rawlist()` (FTP `LIST` command) to check for file existence.
* `WP_Filesystem_ftpsockets` uses file size to check for file existence.
Reference: [https://www.ietf.org/rfc/rfc959.txt RFC 959: File Transfer Protocol (FTP)]
Follow-up to [6779], [11821], [25274], [33648], [34733], [35944], [35946], [53860].
See #51170.
Built from https://develop.svn.wordpress.org/trunk@53862
git-svn-id: http://core.svn.wordpress.org/trunk@53421 1a063a9b-81f0-0310-95a4-ce76da25c4cd
WordPress FTP file checking was previously based upon `ftp_nlist()`. This function can be problematic at scale with a directory containing a large number of files. The same issue occurred using it with ftpsockets.
This changeset rewrites the FTP `exists()` functions to utilize a more efficient and stable check.
Props giox069, desrosj, mkox, afragen, costdev, pbiron, peterwilsoncc.
Fixes#51170.
See #53318, #39781.
Built from https://develop.svn.wordpress.org/trunk@53860
git-svn-id: http://core.svn.wordpress.org/trunk@53419 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Correct an issue where the secondary mime type full size image would not be properly resized (and `-scaled` added to the name) when the original upload is over the `big_image_size_threshold` dimensions.
Props mukesh27.
See #55443.
Built from https://develop.svn.wordpress.org/trunk@53848
git-svn-id: http://core.svn.wordpress.org/trunk@53407 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The function executes an optimized query to get the last revision ID and total count. It was originally introduced for `WP_REST_Posts_Controller::prepare_links()`, and is now used in a few more places in core:
* `register_and_do_post_meta_boxes()`
* `wp_get_post_revisions_url()`
* `wp_update_custom_css_post()`
Follow-up to [53759], [53769], [53778], [53779], [53841].
Props peterwilsoncc, mukesh27, SergeyBiryukov.
Fixes#56279.
Built from https://develop.svn.wordpress.org/trunk@53842
git-svn-id: http://core.svn.wordpress.org/trunk@53401 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes WPCS errors in `WP_Site_Health::get_test_plugin_version()` and `::get_test_theme_version()`:
* `Expected exactly one space between closing parenthesis and opening control structure; " " found.`
* `Expected 1 space(s) after closing parenthesis; found 2`
Follow-up to [53816].
See #56134.
Built from https://develop.svn.wordpress.org/trunk@53817
git-svn-id: http://core.svn.wordpress.org/trunk@53376 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This displays a more appropriate message in case the site does not have any active plugins or installed themes.
Follow-up to [44986], [45099], [45336].
Props Presskopp, costdev, martin.krcho, Clorith, SergeyBiryukov.
Fixes#56134.
Built from https://develop.svn.wordpress.org/trunk@53816
git-svn-id: http://core.svn.wordpress.org/trunk@53375 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset replaces the default "Just another WordPress site" tagline with an empty string for new installations. The reasoning is:
1. Not all themes display the tagline;
2. Not everyone changes the default tagline;
3. When people don't see the tagline in their theme, they may not realize it is still visible in some places, like feeds.
The string "Just another WordPress site" and the related multisite string: "Just another {NETWORK} site" are now only used as a placeholder for the tagline admin option.
Props markjaquith, Denis-de-Bernardy, westi, RyanMurphy, kovshenin, SergeyBiryukov, chriscct7, tyxla, hyperbrand, karmatosed, lukecavanagh, melchoyce, boemedia, khag7, sabernhardt, audrasjb, peterwilsoncc, costdev, martinkrcho, rafiahmedd.
Fixes#6479.
Built from https://develop.svn.wordpress.org/trunk@53815
git-svn-id: http://core.svn.wordpress.org/trunk@53374 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This renames `$tax` to `$taxonomy_object` and `$s` to `$search` for clarity. The latter is only renamed when used as an internal variable and not referring to the `$s` global.
The list of affected functions:
* `wp_ajax_ajax_tag_search()`
* `wp_ajax_add_link_category`
* `wp_ajax_add_tag()`
* `wp_ajax_get_tagcloud()`
* `wp_ajax_inline_save_tax()`
* `wp_ajax_find_posts()`
Follow-up to [6542], [8901], [10222], [12833], [16771], [16992], [22723], [38698].
Props azouamauriac.
Fixes#55098.
Built from https://develop.svn.wordpress.org/trunk@53801
git-svn-id: http://core.svn.wordpress.org/trunk@53360 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset introduces the `ajax_term_search_results` hook which can be used to filter the term search results returned by the AJAX term query.
Props grandeljay, costdev, ironprogrammer, audrasjb, SergeyBiryukov.
Fixes#55606.
Built from https://develop.svn.wordpress.org/trunk@53781
git-svn-id: http://core.svn.wordpress.org/trunk@53340 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This aims to reduce ambiguity about what exactly is the "first" or "last" revision, and bring more consistency with similar wording elsewhere in core, e.g. latest posts, latest comments, etc.
This affects:
* `wp_save_post_revision()`
* `wp_prepare_revisions_for_js()`
* `WP_Customize_Manager::filter_revision_post_has_changed()`
Follow-up to [53759], [53769], [53778].
Props peterwilsoncc.
Fixes#55857.
Built from https://develop.svn.wordpress.org/trunk@53779
git-svn-id: http://core.svn.wordpress.org/trunk@53338 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset also introduces the `.word-wrap-break-word` class which can be used to apply `word-wrap: break-word` to admin elements when needed.
Props mitogh, costdev, kapilpaul, alamgircsebd, sabernhardt, anantajitjg, afercia, circlecube, SergeyBiryukov, rafiahmedd, audrasjb.
Fixes#55393.
Built from https://develop.svn.wordpress.org/trunk@53777
git-svn-id: http://core.svn.wordpress.org/trunk@53336 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset introduces the `wp_read_audio_metadata` hook which allows to filter metadata extracted from an uploaded audio file.
This brings consistency with corresponding filters available for image and video file types:
- `wp_read_image_metadata` added in [6313] / #5162.
- `wp_read_video_metadata` added in [41746] / #35218.
Props luigipulcini, SergeyBiryukov, mukesh27.
Fixes#55828.
Built from https://develop.svn.wordpress.org/trunk@53764
git-svn-id: http://core.svn.wordpress.org/trunk@53323 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset adds the capability for core media uploads to generate sub sized images in more than a single mime type. The output formats for each mime type can be controlled through a filter. WebP is used as an additional output format for JPEG images by default to improve front end performance.
When generating additional mime types, only images which are smaller than the respective original are retained. By default, additional mime type images are only generated for the built-in core image sizes and any custom sizes that have opted in.
Image meta is updated with a new 'sources' array containing file details for each mime type. Each image size in the 'sizes' array also gets a new 'sources' array that contains the image file details for each mime type.
This change also increases image upload retries to accommodate additional image sizes. It also adds a `$mime_type` parameter to the `wp_get_missing_image_subsizes` function and filter.
This change adds three new filters to enable full control of secondary mime image generation and output:
* A new filter `wp_image_sizes_with_additional_mime_type_support` that filters the sizes that support secondary mime type output. Developers can use this to control the output of additional mime type sub-sized images on a per size basis.
* A new filter `wp_upload_image_mime_transforms` that filters the output mime types for a given input mime type. Developers can use this to control generation of additional mime types for a given input mime type or even override the original mime type.
* A new filter `wp_content_image_mimes` which controls image mime type output selection and order for frontend content. Developers can use this to control the mime type output preference order for content images. Content images inserted from the media library will use the available image versions based on the order from this filter.
Thanks to the many contributors who helped develop, test and give feedback on this feature.
A haiku to summarize:
Upload a JPEG
Images of all sizes
Output as WebPs
Props flixos90, MatthiasReinholz, studiolxv, markhowellsmead, eatingrules, pbiron, mukesh27, joegrainger, mehulkaklotar, tweetythierry, akshitsethi, peterwilsoncc, eugenemanuilov, mitogh, shetheliving, clarkeemily, codekraft, mikeschroder, clorith, kasparsd, spacedmonkey, trevorpfromsandee, jb510, scofennellgmailcom, seedsca, cagsmith, karinclimber, dainemawer, baxbridge, grapplerulrich, sobatkras, chynnabenton, tonylocalword, barneydavey, kwillmorth, garymatthews919, olliejones, imarkinteractive, jeffpaul, feastdesignco, webbeetle, masteradhoc.
See #55443.
Built from https://develop.svn.wordpress.org/trunk@53751
git-svn-id: http://core.svn.wordpress.org/trunk@53310 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This changeset improves admin forms accessibility by adding labels to the following read-only form fields:
- Network setup screen: new visible label to the four textareas for code users need to paste into their wp-config file and the server configuration file (web.config or .htaccess).
- `setup-config.php`: new visible label to one textarea for code to include in the `wp-config` file manually.
- Admin toolbar: adds an `arial-label` attribute to the old "shortlink" feature (not used anymore but still activable by plugins).
Props sabernhardt, audrasjb, ryokuhi, joedolson.
Fixes#54302.
Built from https://develop.svn.wordpress.org/trunk@53745
git-svn-id: http://core.svn.wordpress.org/trunk@53304 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `wp_new_comment()`, `wp_update_comment()`, and `wp_filter_comment()` functions already normalize the `user_ID` parameter internally to `user_id`, which matches the database field name.
This commit aims to bring some consistency when passing the parameter in core.
The corresponding `$user_ID` variable is also renamed to `$user_id` to match the other variables when not referring to the `$user_ID` global, which has an exception in the WordPress coding standards.
Follow-up to [8543], [8720], [12267], [12300], [26491], [28915], [28922], [34799], [49303].
See #55647, #56244.
Built from https://develop.svn.wordpress.org/trunk@53729
git-svn-id: http://core.svn.wordpress.org/trunk@53288 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This fixes two WPCS warnings:
* `Variable "$comment_post_ID" is not in valid snake_case format`
* `Variable "$comment_author_IP" is not in valid snake_case format`
While matching the database fields of the same name, these variables did not follow the WordPress coding standards, and are now renamed to address that.
Note: The name change only affects internal variables and parameters for a few actions receiving a comment post ID:
* `edit_comment`
* `comment_id_not_found`
* `comment_closed`
* `comment_on_trash`
* `comment_on_draft`
* `comment_on_password_protected`
* `pre_comment_on_post`
The change does not affect parameters for functions receiving an array of comment data:
* `wp_insert_comment()`
* `wp_new_comment()`
* `wp_update_comment()`
* `wp_handle_comment_submission()`
The associated array keys still match the database fields: `comment_post_ID` and `comment_author_IP`.
Follow-up to [1706], [2894], [8720], [28427], [28437], [28457], [34799], [53720],
See #55647, #56244.
Built from https://develop.svn.wordpress.org/trunk@53723
git-svn-id: http://core.svn.wordpress.org/trunk@53282 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures that the post lock data returned by the Heartbeat API is consistent.
Previously, `wp_check_locked_posts()` was updated to return the name of the user currently editing the post, but the `wp_refresh_post_lock()` response did not get a similar change.
Follow-up to [53070].
Props nathan.noom.
Fixes#56197.
Built from https://develop.svn.wordpress.org/trunk@53692
git-svn-id: http://core.svn.wordpress.org/trunk@53251 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The [https://make.wordpress.org/core/2021/02/19/feature-plugin-rollback-update-failure/ Rollback Update Failure feature project] creates a temporary backup of plugins and themes before updating. This aims to make the update process more reliable and ensure that if a plugin or theme update fails, the previous version can be safely restored.
If the [https://wordpress.org/plugins/rollback-update-failure/ Rollback Update Failure plugin] is installed, `WP_Upgrader::install_package()` will use the `move_dir()` function from there for better performance. Instead of copying a directory from one location to another, it uses the `rename()` PHP function to speed up the process, which is instrumental in creating a temporary backup without a delay. If the renaming failed, it falls back to `copy_dir()` WP function.
This conditional aims to facilitate broader testing of the feature. It is temporary, until the plugin is merged into core.
Props afragen, pbiron, costdev, davidbaumwald, audrasjb, jrf, SergeyBiryukov.
Fixes#56057. See #51857, #54166.
Built from https://develop.svn.wordpress.org/trunk@53578
git-svn-id: http://core.svn.wordpress.org/trunk@53167 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`use_block_editor_for_post_type` and `use_block_editor_for_post` can be very useful in more contexts than wp-admin, especially when a site is in transition. For example, you may want to do things on init that are different.
Neither function depends on other functions that are available only in wp-admin (other than use_block_editor_for_post() relying on use_block_editor_for_post_type() and an admin-referrer check that's historically gated by a query variable and now also gated by is_admin), therefore moving them to wp-includes seems both feasible and beneficial
Props ethitter, jorbin.
Fixes#51819.
Built from https://develop.svn.wordpress.org/trunk@53559
git-svn-id: http://core.svn.wordpress.org/trunk@53148 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Includes:
* Documenting the returned array using hash notation.
* Adding a `@since` note for the `$filesize` value being included in the returned array.
This affects:
* `wp_generate_attachment_metadata()`
* `wp_get_attachment_metadata()`
* `WP_Image_Editor::save()`
* `WP_Image_Editor_GD::save()` and `::_save()`
* `WP_Image_Editor_Imagick::save()` and `::_save()`
Follow-up to [22094], [22619], [52837], [53546].
See #55646.
Built from https://develop.svn.wordpress.org/trunk@53547
git-svn-id: http://core.svn.wordpress.org/trunk@53136 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Since WordPress 3.5, `wp_save_image_file()` uses `WP_Image_Editor` classes under the hood to save the images.
While the `save()` method in those instances returns `array|WP_Error` and is documented as such, the return type of the `wp_save_image_file()` function was still left as `bool`.
A better solution would be to adjust the function to return the documented boolean type. However, doing that after 20+ major WP releases would be a backward compatibility break, so the documentation is now updated instead.
Includes:
* Documenting the returned array using hash notation.
* Adding a `@since` note for the `$image` parameter expecting a `WP_Image_Editor` instance.
* Adding a `@since` note for the `$filesize` value being included in the returned array.
Follow-up to [22094], [22619], [52837].
Props jrf, SergeyBiryukov.
See #55646.
Built from https://develop.svn.wordpress.org/trunk@53546
git-svn-id: http://core.svn.wordpress.org/trunk@53135 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Peter Wilson
Sergey Biryukov
audrasjb
Adam Silverstein
Aaron Jorbin