[39831] introduced more strict MIME type checking for uploads, which
resulted in unintetionally blocking several filetypes that were
previously valid. This change uses a more targeted approach to MIME
validation to restore previous behavior for most types.
Props blobfolio, iandunn, ipstenu, markoheijnen, xknown, joemcgill.
Fixes#39550, #39552.
Built from https://develop.svn.wordpress.org/trunk@40124
git-svn-id: http://core.svn.wordpress.org/trunk@40061 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Partial revert of [38929].
This reverts the source code from the commit for #30210 to prevent valid but empty feeds from returning 404 file not found errors for the home and custom feeds.
The tests in the commit that remain applicable are retained.
Props pavelevap for reporting, stevenkword for initial patch.
See #30210.
Fixes#39157.
Built from https://develop.svn.wordpress.org/trunk@40030
git-svn-id: http://core.svn.wordpress.org/trunk@39967 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This adds a new function `wp_get_image_mime()` which is used by
`wp_check_filetype_and_ext()` to validate image files using
`exif_imagetype()` if available instead of `getimagesize()`.
`getimagesize()` is less performant than `exif_imagetype()` and is
dependent on GD. If `exif_imagetype()` is not available, it falls back to
`getimagesize()` as before.
If `wp_check_filetype_and_ext()` can't validate the filetype, we now return
`false` for ext/MIME values.
See #11946.
Built from https://develop.svn.wordpress.org/trunk@39831
git-svn-id: http://core.svn.wordpress.org/trunk@39769 1a063a9b-81f0-0310-95a4-ce76da25c4cd
A theme can opt-in for tailored starter content to apply to the customizer when previewing the theme on a fresh install, when `fresh_site` is at its initial `1` value. Starter content is staged in the customizer and does not go live unless the changes are published. Initial starter content is added to Twenty Seventeen.
* The `fresh_site` flag is cleared when a published post or page is saved, when widgets are modified, or when the customizer state is saved.
* Starter content is registered via `starter-content` theme support, where the argument is an array containing `widgets`, `posts`, `nav_menus`, `options`, and `theme_mods`. Posts/pages in starter content are created with the `auto-draft` status, re-using the page/post stubs feature added to nav menus and the static front page controls.
* A `get_theme_starter_content` filter allows for plugins to extend a theme's starter content.
* Starter content in themes can/should re-use existing starter content items in core by using named placeholders.
* Import theme starter content into customized state when fresh site.
* Prevent original_title differences from causing refreshes if title is present.
* Ensure nav menu item url is set according to object when previewing.
* Make sure initial saved state is false if there are dirty settings without an existing changeset.
* Ensure dirty settings are cleaned upon changeset publishing.
Props helen, westonruter, ocean90.
Fixes#38114, #38533.
Built from https://develop.svn.wordpress.org/trunk@38991
git-svn-id: http://core.svn.wordpress.org/trunk@38934 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In addition to `wp_list_filter()` for filtering a list of objects, and `wp_list_pluck()` for plucking a certain field out of each object in a list, this new function can be used for sorting a list of objects by specific fields. These functions are now all contained within the new `WP_List_Util()` class and `wp_list_sort()` is used in various parts of core for sorting lists.
This was previously committed in [38859] but got reverted in [38862] and [38863]. To fix the previous issues, `wp_list_sort()` supports now an additional argument to preserve array keys via `uasort()`.
Props flixos90, DrewAPicture, jorbin.
Fixes#37128.
Built from https://develop.svn.wordpress.org/trunk@38928
git-svn-id: http://core.svn.wordpress.org/trunk@38871 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In addition to `wp_list_filter()` for filtering a list of objects, and `wp_list_pluck()` for plucking a certain field out of each object in a list, this new function can be used for sorting a list of objects by specific fields. These functions are now all contained within the new `WP_List_Util()` class and `wp_list_sort()` is used in various parts of core for sorting lists.
Props flixos90, DrewAPicture, jorbin.
Fixes#37128.
Built from https://develop.svn.wordpress.org/trunk@38859
git-svn-id: http://core.svn.wordpress.org/trunk@38802 1a063a9b-81f0-0310-95a4-ce76da25c4cd
One thing fairly common to the cache groups is a block of code to look to see when the cache was last changed, and if there isn't one, to set it for the current microtime(). It appears in 8 different places in core. This adds a new helper `wp_cache_get_last_changed` to DRY things up a bit.
Since `wp-includes/cache.php` isn't guaranteed to be loaded, this new function is in `wp-includes/functions.php`
Props spacedmonkey, desrosj.
Fixes#37464.
Built from https://develop.svn.wordpress.org/trunk@38849
git-svn-id: http://core.svn.wordpress.org/trunk@38792 1a063a9b-81f0-0310-95a4-ce76da25c4cd
REST API endpoints for your WordPress content. These endpoints provide machine-readable external access to your WordPress site with a clear, standards-driven interface, allowing new and innovative apps for interacting with your site. These endpoints support all of the following:
- Posts: Read and write access to all post data, for all types of post-based data, including pages and media.
- Comments: Read and write access to all comment data. This includes pingbacks and trackbacks.
- Terms: Read and write access to all term data.
- Users: Read and write access to all user data. This includes public access to some data for post authors.
- Meta: Read and write access to metadata for posts, comments, terms, and users, on an opt-in basis from plugins.
- Settings: Read and write access to settings, on an opt-in basis from plugins and core. This enables API management of key site content values that are technically stored in options, such as site title and byline.
Love your REST API, WordPress! The infrastructure says, "Let's do lunch!" but the content API endpoints say, "You're paying!"
Props rmccue, rachelbaker, danielbachhuber, joehoyle, adamsilverstein, afurculita, ahmadawais, airesvsg, alisspers, antisilent, apokalyptik, artoliukkonen, attitude, boonebgorges, bradyvercher, brianhogg, caseypatrickdriscoll, chopinbach, chredd, christianesperar, chrisvanpatten, claudiolabarbera, claudiosmweb, cmmarslender, codebykat, coderkevin, codfish, codonnell822, daggerhart, danielpunkass, davidbhayes, delphinus, desrosj, dimadin, dotancohen, DrewAPicture, Dudo1985, duncanjbrown, eherman24, eivhyl, eliorivero, elyobo, en-alis, ericandrewlewis, ericpedia, evansobkowicz, fjarrett, frozzare, georgestephanis, greatislander, guavaworks, hideokamoto, hkdobrev, hubdotcom, hurtige, iandunn, ircrash, ironpaperweight, iseulde, Japh, jaredcobb, JDGrimes, jdolan, jdoubleu, jeremyfelt, jimt, jjeaton, jmusal, jnylen0, johanmynhardt, johnbillion, jonathanbardo, jorbin, joshkadis, JPry, jshreve, jtsternberg, JustinSainton, kacperszurek, kadamwhite, kalenjohnson, kellbot, kjbenk, kokarn, krogsgard, kuchenundkakao, kuldipem, kwight, lgedeon, lukepettway, mantismamita, markoheijnen, matrixik, mattheu, mauteri, maxcutler, mayukojpn, michael-arestad, miyauchi, mjbanks, modemlooper, mrbobbybryant, NateWr, nathanrice, netweb, NikV, nullvariable, oskosk, oso96_2000, oxymoron, pcfreak30, pento, peterwilsoncc, Pezzab, phh, pippinsplugins, pjgalbraith, pkevan, pollyplummer, pushred, quasel, QWp6t, schlessera, schrapel, Shelob9, shprink, simonlampen, Soean, solal, tapsboy, tfrommen, tharsheblows, thenbrent, tierra, tlovett1, tnegri, tobych, Toddses, toro_unit, traversal, vanillalounge, vishalkakadiya, wanecek, web2style, webbgaraget, websupporter, westonruter, whyisjake, wonderboymusic, wpsmith, xknown, zyphonic.
Fixes#38373.
Built from https://develop.svn.wordpress.org/trunk@38832
git-svn-id: http://core.svn.wordpress.org/trunk@38775 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`get_network()` falls back to the current network when called without any arguments. Between this and `get_current_network_id()`, we can replace almost all instances of the global `$current_site` and all instances of `get_current_site()`.
This effectively deprecates `get_current_site()`, something that we'll do in a future ticket.
Props flixos90.
Fixes#37414.
Built from https://develop.svn.wordpress.org/trunk@38814
git-svn-id: http://core.svn.wordpress.org/trunk@38757 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Additionally, update the `$message` parameter description in the DocBlock for `wp_die()` to make it explicitly clear messages derived from a passed `WP_Error` object will only be evaluated if not performing an Ajax or XML-RPC request (as both default handlers completely ignore `WP_Error` object messages).
See #37770.
Built from https://develop.svn.wordpress.org/trunk@38518
git-svn-id: http://core.svn.wordpress.org/trunk@38459 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* `wp-admin` and `wp-includes` are scanned for classes to autoload
* Several 3rd-party and Ryan McCue-shaped libraries are excluded when the classmap is generated, see `composer.json`: `autoload.exclude-from-classmap`
* `wp-vendor/autoload_52.php` is included at the top of `wp-settings.php` - no changes need to be made to unit tests to include the autoloader
* An avalanche of `require()` and `require_once()` calls that loaded class files have been removed from the codebase.
The following files have been added to `svn:ignore` - they are not 5.2-compatible and fail during pre-commit:
* src/wp-vendor/autoload.php
* src/wp-vendor/composer/autoload_real.php
* src/wp-vendor/composer/autoload_static.php
* src/wp-vendor/composer/ClassLoader.php
We favor these files instead:
* src/wp-vendor/autoload_52.php
* src/wp-vendor/composer/autoload_real_52.php
* src/wp-vendor/composer/ClassLoader52.php
When new PHP classes are added to the codebase, simply run `composer install` or `composer update` from the project root to update the autoloader.
The future is now.
See #36335.
Built from https://develop.svn.wordpress.org/trunk@38399
git-svn-id: http://core.svn.wordpress.org/trunk@38340 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Registration is now based solely on object type, which allows the code around this to be simplified significantly.
In the process of making this adjustment:
* `register_meta()`, `unregister_meta_key()`, `get_registered_metadata()`, and `registered_meta_key_exists()` no longer return `WP_Error` objects.
* The recently introduced `wp_object_type_exists()` function and the restriction on object type has been removed.
Note: No guarantee of uniqueness is made across object subtypes. Registered meta keys should be uniquely prefixed to avoid conflict.
Fixes#35658.
Built from https://develop.svn.wordpress.org/trunk@38095
git-svn-id: http://core.svn.wordpress.org/trunk@38036 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Don't lower memory limit if the current limit is greater than `WP_MAX_MEMORY_LIMIT`.
* Set `WP_MEMORY_LIMIT` and `WP_MAX_MEMORY_LIMIT` to current limit if the `memory_limit` setting can't be changed at runtime.
* Use `wp_convert_hr_to_bytes()` when parsing the value of the `memory_limit` setting because it can be a shorthand or an integer value.
* Introduce `wp_raise_memory_limit( $context )` to raise the PHP memory limit for memory intensive processes. This DRYs up some logic and includes the existing `admin_memory_limit` and `image_memory_limit` filters. The function can also be used for custom contexts, the `{$context}_memory_limit` filter allows to customize the limit.
* Introduce `wp_is_ini_value_changeable( $setting )` to determine whether a PHP ini value is changeable at runtime.
* Remove a `function_exists( 'memory_get_usage' )` check. Since PHP 5.2.1 support for memory limit is always enabled.
Related commits: [38011-38013]
Props jrf, A5hleyRich, swissspidy, ocean90.
Fixes#32075.
Built from https://develop.svn.wordpress.org/trunk@38015
git-svn-id: http://core.svn.wordpress.org/trunk@37956 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In doing this, non-core object types are no longer forcibly blocked and are instead checked against `wp_object_type_exists()` which has a filterable return value. Still, filter that at your own risk.
props Faison for the initial patch.
see 35658.
Built from https://develop.svn.wordpress.org/trunk@37991
git-svn-id: http://core.svn.wordpress.org/trunk@37932 1a063a9b-81f0-0310-95a4-ce76da25c4cd
`Pragma` is supposed to be a request header, but we've been including it in responses since the beginning of time.
This is a relic dating all the way back to b2, probably originally added because Internet Explorer version 5 and earlier didn't understand the `Cache-Control` header in responses, but they did (incorrectly) obey the `Pragma` header.
Internet Explorer 6 and 7 will obey the `Pragma` response header only if no other cache-related response headers are present (in our case, they are always present), and all other browsers ignore the `Pragma` response header.
Props geekysoft.
Fixes#37250.
Built from https://develop.svn.wordpress.org/trunk@37944
git-svn-id: http://core.svn.wordpress.org/trunk@37885 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Moving to load.php introduces parity with other commonly evaluated `is_*()` functions such as `is_admin()` or `is_multisite()`. It also makes `is_ssl()` available much earlier in the loading process, such as for use in drop-ins like advanced-cache.php.
Props johnjamesjacoby.
Fixes#35844.
Built from https://develop.svn.wordpress.org/trunk@37677
git-svn-id: http://core.svn.wordpress.org/trunk@37643 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Similar to `get_current_blog_id`, this can be used to get the ID of the `$current_site` global. If not available, it will fallback to the main network ID. In single site, this will return 1.
Props spacedmonkey, flixos90.
Fixes#33900.
Built from https://develop.svn.wordpress.org/trunk@37670
git-svn-id: http://core.svn.wordpress.org/trunk@37636 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds the keyboard navigation query vars to `wp_removable_query_args()` and passes the results of said function to remove_query_var() inside the WP_List_Table pagination method.
Props EFAREM for the initial patch.
Fixes#35620.
Built from https://develop.svn.wordpress.org/trunk@37663
git-svn-id: http://core.svn.wordpress.org/trunk@37629 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Move the REST API JSONP callback validation check into a separate function named `wp_check_jsonp_callback()`. This allows plugins to use the built-in validation when handling JSONP callbacks.
Extremely Important Note: If you send JSONP in your custom response, make sure you prefix the response with `/**/`. This will mitigate the Rosetta Flash exploit. You should also send the `X-Content-Type-Options:nosniff` header, or even better, use the REST API infrastructure.
Props rmccue.
Fixes#28523.
Built from https://develop.svn.wordpress.org/trunk@37646
git-svn-id: http://core.svn.wordpress.org/trunk@37612 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Also use 'back-compat' in some inline comments where backward compatibility is the subject and shorthand feels more natural.
Note: 'backwards compatibility/compatibile' can also be considered correct, though it's primary seen in regular use in British English.
Props ocean90.
Fixes#36835.
Built from https://develop.svn.wordpress.org/trunk@37431
git-svn-id: http://core.svn.wordpress.org/trunk@37397 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Rejoice, for your admins will feel more native to your surrounding computing environment and likely load faster, especially when offline, as they no longer have to talk to The Google Overlord.
At the time of introduction in 3.8, there were not good system fonts common to all platforms at the time. In the years since, Windows, Android, OS X, iOS, Firefox OS, and various flavors of Linux have all gotten their own (good) system UI fonts.
There will definitely be visual bugs, mainly around alignment and spacing; these should be documented and reported on the ticket and fixed more atomically so that our current and future selves have a better understanding of what happened and why.
The style remains registered, as it is almost certainly in use by themes and plugins.
props mattmiklic.
see #36753.
Built from https://develop.svn.wordpress.org/trunk@37361
git-svn-id: http://core.svn.wordpress.org/trunk@37327 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Known functions, classes, and methods are now auto-linked in Code Reference pages following #meta1483.
Note: Hook references are still linked via inline `@see` tags due to the unlikelihood of reliably matching for known hooks based on a RegEx pattern.
See #32246.
Built from https://develop.svn.wordpress.org/trunk@37342
git-svn-id: http://core.svn.wordpress.org/trunk@37308 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Unicode 8 added `U+1F644`, "Face with Rolling Eyes", which matches our `:roll:` smiley. Continuing our ever present quest to rid the world of legacy smilies, we now translate that smiley into its emoji form.
Sadly, `:mrgreen:` remains sorely under-represented in the Unicode standard, I'm inclined to think that we should buy a voting membership of the Unicode Consortium, in order to rectify that situation. (Personally, I'm hoping for a green skin tone modifier.)
Fixes#36365.
Built from https://develop.svn.wordpress.org/trunk@37296
git-svn-id: http://core.svn.wordpress.org/trunk@37262 1a063a9b-81f0-0310-95a4-ce76da25c4cd
To improve the performance of `wp_upload_dir()` the result of `wp_mkdir_p()` was stored in a persistent cache, introduced in [36565]. But this becomes an issue when WordPress is scaled horizontally. You may end up caching a value for a server where the directory doesn't exist which will prevent further uploads on other servers because of the persistent cache.
The fix is to use a non-persistent cache.
Props azaozz, ocean90.
See #34359.
Fixes#36621.
Built from https://develop.svn.wordpress.org/trunk@37285
git-svn-id: http://core.svn.wordpress.org/trunk@37251 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Following pattern of `wp_get_mime_types()`, introduce `wp_get_ext_types()` function. New function returns a filtered list of file types with their extensions.
* Use this function in new tests for `wp_ext2type()`.
Props borgesbruno.
Fixes#35987.
Built from https://develop.svn.wordpress.org/trunk@37189
git-svn-id: http://core.svn.wordpress.org/trunk@37155 1a063a9b-81f0-0310-95a4-ce76da25c4cd
An unintended consequence of improving the precommit task is that when it's time to run a release, more tasks need to get run to verify things. This adds a prerelease task to help fix that situation. grunt prerelease should include tasks that verify the code base is ready to be released to the wild and find all the tears on the mausoleum floor and help Blood stain the Colosseum doors.
See #35557
Built from https://develop.svn.wordpress.org/trunk@36930
git-svn-id: http://core.svn.wordpress.org/trunk@36898 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Cache the output in non-persistent cache.
- Cache the result from `wp_mkdir_p()` in persistent cache (when present).
- Introduce `wp_get_upload_dir()` for use when not uploading files. It is equivalent to `wp_upload_dir()` but does not check for the existence or create the upload directory.
- Change tests to use the non-cached `_wp_upload_dir()`. They change options on the fly (should never be used in production) to simulate different environments.
- Introduce `_upload_dir_no_subdir()` and `_upload_dir_https()` to facilitate testing. These use the proper `upload_dir` filter to simulate different environments.
Props kovshenin, azaozz.
See #34359.
Built from https://develop.svn.wordpress.org/trunk@36565
git-svn-id: http://core.svn.wordpress.org/trunk@36532 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Multisite functions use the term "blog" to refer to what we now call a "site," e.g. `get_current_blog_id()`. These functions are here to stay because of our commitment to backwards compatibility. What we can do is set the documentation straight.
See #35417.
Built from https://develop.svn.wordpress.org/trunk@36417
git-svn-id: http://core.svn.wordpress.org/trunk@36384 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The API uses this to do special operations on list responses (used
for collections), so we need to detect whether an array is
associative or numeric-indexed.
After much discussion, the bikeshed is to be painted green and gold.
See #33982.
Built from https://develop.svn.wordpress.org/trunk@34927
git-svn-id: http://core.svn.wordpress.org/trunk@34892 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `_network_option()` parameter order will be changing to accept `$network_id` first. The `_site_option()` functions will remain in use throughout core as our way of retrieving a network option for the current network.
See #28290.
Built from https://develop.svn.wordpress.org/trunk@34912
git-svn-id: http://core.svn.wordpress.org/trunk@34877 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `WP_INSTALLING` constant is a flag that WordPress sets in a number of
places, telling the system that options should be fetched directly from the
database instead of from the cache, that WP should not ping wordpress.org for
updates, that the normal "not installed" checks should be bypassed, and so on.
A constant is generally necessary for this purpose, because the flag is
typically set before the WP bootstrap, meaning that WP functions are not yet
available. However, it is possible - notably, during `wpmu_create_blog()` -
for the "installing" flag to be set after WP has already loaded. In these
cases, `WP_INSTALLING` would be set for the remainder of the process, since
there's no way to change a constant once it's defined. This, in turn, polluted
later function calls that ought to have been outside the scope of site
creation, particularly the non-caching of option data. The problem was
particularly evident in the case of the automated tests, where `WP_INSTALLING`
was set the first time a site was created, and remained set for the rest of the
suite.
The new `wp_installing()` function allows developers to fetch the current
installation status (when called without any arguments) or to set the
installation status (when called with a boolean `true` or `false`). Use of
the `WP_INSTALLING` constant is still supported; `wp_installing()` will default
to `true` if the constant is defined during the bootstrap.
Props boonebgorges, jeremyfelt.
See #31130.
Built from https://develop.svn.wordpress.org/trunk@34828
git-svn-id: http://core.svn.wordpress.org/trunk@34793 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Expand on the logic previously available as part of `is_main_network()` and provide a way to obtain the ID of the main network. Most useful in multi-network configurations.
Props @johnjamesjacoby for the initial patch.
Fixes#30294.
Built from https://develop.svn.wordpress.org/trunk@32775
git-svn-id: http://core.svn.wordpress.org/trunk@32746 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Replace exisiting smilies with equivalent emoji, or with shiny new smiley images where no emoji existed.
Props batmoo, joen and mkaz for the original plugin upon which this is based.
Props pento, iseulde, kraftbj and peterwilsoncc for making the internet's dreams come true.
See #31242
Built from https://develop.svn.wordpress.org/trunk@31733
git-svn-id: http://core.svn.wordpress.org/trunk@31714 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Up to this point, various core elements' DocBlocks incorrectly included an `@internal` tag as a means for skipping the parsing process. When paired with a description (inline or otherwise), `@internal` is a valid tag meant to provide internal-only context, but not necessarily to skip parsing the entire element.
See #30987.
Built from https://develop.svn.wordpress.org/trunk@31170
git-svn-id: http://core.svn.wordpress.org/trunk@31151 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Affects DocBlocks for the following core elements:
* Markdown-indent a code snippet in the description for `_deprecated_argument()`
* Markdown-indent a code snippet in the description for `wp_localize_script()`
* Backtick-escape HTML tags in two parameter descriptions for `wp_register()`
* Various DocBlock formatting in the description for `get_bloginfo()`
* Remove HTML tag from the summary for `_wp_render_title_tag()`
* Backtick-escape a HTML tag in the description for `get_archives_link()`
* Markdown-indent a code snippet in the description for `wp_admin_css_color()`
* Markdown-indent a code snippet in the description for the `welcome_panel` hook
Props rarst.
See #30473.
Built from https://develop.svn.wordpress.org/trunk@30541
git-svn-id: http://core.svn.wordpress.org/trunk@30530 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The ability to pass an error code as short-hand to the `$title` and `$args` parameters was added in r30355. Changes also include cleaned-up formatting and line-wraps for other documentation in the DocBlock.
See [30355]. Fixes#10551.
Built from https://develop.svn.wordpress.org/trunk@30379
git-svn-id: http://core.svn.wordpress.org/trunk@30376 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Per our inline documentation standards, no further use of the `@uses` tag is recommended as used and used-by relationships can be derived through other means. This removes most uses of the tag in core documentation, with remaining tags to be converted to `@global` or `@see` as they apply.
Fixes#30191.
Built from https://develop.svn.wordpress.org/trunk@30105
git-svn-id: http://core.svn.wordpress.org/trunk@30105 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Add a helper function, `wp_get_last_changed()`, to retrieve a last-modified timestamp by cache group
* When caching a term, also make cache entries for slug and name via `slug:{$term_id}` and `name:{$term_id}` keys in the `$taxonomy:$last_changed` bucket that reference the term_id
* In `clean_term_cache()` and `update_term_cache()`, respect `$_wp_suspend_cache_invalidation`
* Original term cache entries maintain BC
Adds unit tests.
Props wonderboymusic, tollmanz, boonebgorges.
Fixes#21760.
Built from https://develop.svn.wordpress.org/trunk@29915
git-svn-id: http://core.svn.wordpress.org/trunk@29668 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Various improvements:
* Adds `@see` reference for `wp_list_comments()` in 'wp_list_comments_args' filter docs, added in [28285]
* Various phpDoc tweaks for the 'run_wptexturize' filter docs, added in [28715]
* Sentence and wrapping changes for `is_https_url()`, added in [28894]
* Documents the `$args` parameter for `wp_dropdown_languages()`, added in [29007]
* Adds a period to the parameter description for `_update_posts_count_on_delete()`, added in [28835]
* Documents a global in `is_customize_preview()`, added in [28999]
* phpDoc tweaks, adds an access modifier for `wpdb::esc_like()`, added in [28711]
See #28885.
Built from https://develop.svn.wordpress.org/trunk@29163
git-svn-id: http://core.svn.wordpress.org/trunk@28947 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Add _dir: 'rtl' to the TinyMCE translation object.
- Fix editor.css for RTL.
- Fix the Edit and Delete buttons position for wpview and images.
- For _mce_set_direction(), update documentation and fix adding the 'ltr' button.
Fixes#27773
Built from https://develop.svn.wordpress.org/trunk@28094
git-svn-id: http://core.svn.wordpress.org/trunk@27925 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Add a state: `Add Subititles`
* Add `text/vtt` to the list of allowed mime-types, files end in `.vtt`. `.srt` files are served as `text/plain`.
* The content body of a video shortcode should be used for adding `<track>` elements only. This happens dynamically in the modal. If added by hand, they can still be parsed and managed.
See #27016.
Built from https://develop.svn.wordpress.org/trunk@27481
git-svn-id: http://core.svn.wordpress.org/trunk@27325 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In `dead_db()`, move the call to `wp_load_translations_early()` before the inclusion of the `db-error.php` file to allow translation in both locations before the template is loaded.
Props sbruner, kovshenin.
Fixes#25703.
Built from https://develop.svn.wordpress.org/trunk@27056
git-svn-id: http://core.svn.wordpress.org/trunk@26929 1a063a9b-81f0-0310-95a4-ce76da25c4cd
innocent in the ways of The Shears, a triviality, a nothing-of-consequence. But there are consequences indeed for recklessly trailing your whitespace. Naturally, they a dire!
One, two! One, two! And through and through
The Pinking Shears went snicker-snack!
They plucked your tail and with your space
They went sniksnuking back.
Let me tell you, that can be uncomfortable, so always pre-sniksnuk your trailing whites. May The Shears be with you.
Built from https://develop.svn.wordpress.org/trunk@26851
git-svn-id: http://core.svn.wordpress.org/trunk@26738 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The ordering logic is as follows:
* Full sentence matches in post titles.
* All search terms in post titles.
* Any search terms in post titles.
* Full sentence matches in post content.
Each section and any remaining posts are then sorted by date.
Introduces some filters:
* wp_search_stopwords, to filter stop words ignored in WHERE.
* posts_search_orderby, to filter the ORDER BY when ordering search results.
props azaozz, wonderboymusic.
fixes#7394.
Built from https://develop.svn.wordpress.org/trunk@25632
git-svn-id: http://core.svn.wordpress.org/trunk@25549 1a063a9b-81f0-0310-95a4-ce76da25c4cd
By default, a network ID of 1 is assumed to be the main network.
Otherwise, it is the first network listed in the wp_site table.
If PRIMARY_NETWORK_ID is defined, it is considered main network.
props jeremyfelt.
see #25030.
Built from https://develop.svn.wordpress.org/trunk@25147
git-svn-id: http://core.svn.wordpress.org/trunk@25126 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Black list the update and upgrade screens.
Allow plugins to white/black list screens via the wp_auth_check_load filter.
Props nacin
see #23295
git-svn-id: http://core.svn.wordpress.org/trunk@24738 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Replace the Close button with an always visible "X" icon in the top/right corner.
- Check if the user is still logged in every 3 min. by default.
- Add 'wp_auth_check_interval' filter so the interval can be set from PHP.
See #23295.
git-svn-id: http://core.svn.wordpress.org/trunk@24695 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- Don't use <base> tag to set target="_blank". It can break form submission. Instead, set target only on links with JS.
- Fix same domain comparison in wp_auth_check_html() when FORCE_SSL_LOGIN == true.
- Properly show/hide the "Close" button when the dialog is shown multiple times.
See #23295
git-svn-id: http://core.svn.wordpress.org/trunk@24208 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* get_tag_regex() altered based on Unit Tests.
* Changes to post-formats.js to provide size and link context during image selection.
* Captions are now output in the_post_format_image() when present.
* The meta value for url is respected for the image post format when the HTML in the image meta doesn't include a link
props wonderboymusic. fixes#23965, #23964. see #24147, #24046.
git-svn-id: http://core.svn.wordpress.org/trunk@24066 1a063a9b-81f0-0310-95a4-ce76da25c4cd
- The login page has "X-Frame-Options: DENY" header.
- Cross-domain when displaying on the front-end on multisite with domain mapping.
- The site forces ssl login but not ssl admin.
Add onbeforeunload prompt to counter (frame-busting) JS redirects. Move the JS and CSS into separate files. See #23295.
git-svn-id: http://core.svn.wordpress.org/trunk@23805 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The exceptions to this are update_post_meta() and add_post_meta() which are often used by plugins in POST handlers and will continue accepting slashed data for now.
Introduce wp_upate_post_meta() and wp_add_post_meta() as unslashed alternatives to update_post_meta() and add_post_meta(). These functions could become methods in WP_Post so don't use them too heavily yet.
Remove all escape() calls from wp_xmlrpc_server. Now that core expects unslashed data this is no longer needed.
Remove addslashes(), addslashes_gpc(), add_magic_quotes() calls on data being prepared for handoff to core functions that until now expected slashed data. Adding slashes in no longer necessary.
Introduce wp_unslash() and use to it remove slashes from GPCS data before using it in core API. Almost every instance of stripslashes() in core should now be wp_unslash(). In the future (a release or three) when GPCS is no longer slashed, wp_unslash() will stop stripping slashes and simply return what is passed. At this point wp_unslash() calls can be removed from core.
Introduce wp_slash() for slashing GPCS data. This will also turn into a noop once GPCS is no longer slashed. wp_slash() should almost never be used. It is mainly of use in unit tests.
Plugins should use wp_unslash() on data being passed to core API.
Plugins should no longer slash data being passed to core. So when you get_post() and then wp_insert_post() the post data from get_post() no longer needs addslashes(). Most plugins were not bothering with this. They will magically start doing the right thing. Unfortunately, those few souls who did it properly will now have to avoid calling addslashes() for 3.6 and newer.
Use wp_kses_post() and wp_kses_data(), which expect unslashed data, instead of wp_filter_post_kses() and wp_filter_kses(), which expect slashed data. Filters are no longer passed slashed data.
Remove many no longer necessary calls to $wpdb->escape() and esc_sql().
In wp_get_referer() and wp_get_original_referer(), return unslashed data.
Remove old stripslashes() calls from WP_Widget::update() handlers. These haven't been necessary since WP_Widget.
Switch several queries over to prepare().
Expect something to break.
Props alexkingorg
see #21767
git-svn-id: http://core.svn.wordpress.org/trunk@23416 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* In 3.4.x, both $url and UPLOADS had trailing slashes
* Due to refactoring, $url is no longer expected to have a trailing slash
* Because of the mismatch, the str_replace() was not working, resulting in an incorrectly verbose upload dir URL
git-svn-id: http://core.svn.wordpress.org/trunk@22736 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevents wp_upload_dir() from obeying the UPLOADS constant when ms-files rewriting is enabled and a blog is switched.
Reverts [22106] thanks to [22108].
see #19235.
git-svn-id: http://core.svn.wordpress.org/trunk@22222 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Introduce a wp_checkdate() function with a single filter to centralise the code that validates dates.
* Improve the error message
* Correctly handle the return value of wp_insert_post which is not always a WP_Error on failure
Fixes#17180
git-svn-id: http://core.svn.wordpress.org/trunk@21922 1a063a9b-81f0-0310-95a4-ce76da25c4cd
* Will be replaced with http://wordpress.org/extend/plugins/atom-publishing-protocol/.
* Introduces an action, xmlrpc_rsd_apis, to add APIs to xmlrpc.php?rsd.
* Introduces support for 'error' being 403 and 50x in class-wp.php.
* Removes 'Remote Publishing' from Writing Settings (see [21804]). Keeps the remote_publishing settings section.
DB version is bumped to generate the new wp-app rewrite rule and remove the old enable_app option.
props wonderboymusic.
fixes#21509.
git-svn-id: http://core.svn.wordpress.org/trunk@21818 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Joe McGill
Sergey Biryukov
Peter Wilson
John Blackbourn
Pascal Birchler
Weston Ruter
Dominik Schilling
Aaron Jorbin
Rachel Baker
Jeremy Felt
Gary Pendergast
Drew Jaynes
Scott Taylor
Dion Hulse
Andrew Ozz
Helen Hou-Sandí
Ryan McCue
Boone Gorges
Eric Lewis
Ella Iseulde Van Dorpe
Joe Hoyle
Andrea Fercia
Andrew Nacin
Mark Jaquith
Ryan Boren
Matt Thomas
Michael Adams
Peter Westwood