Previously, jQuery 1.12.4 was added to the WordPress SVN repo in order to backport an upstream security patch from jQuery 3.4.0.
Now that WordPress includes an unmodified version of jQuery 3.5.1 and no longer needs to maintain a fork, it can be removed from the SVN repo and installed via NPM again as part of the build.
Follow-up to [45342], [49101].
Props peterwilsoncc, SergeyBiryukov.
Fixes#52647.
Built from https://develop.svn.wordpress.org/trunk@50445
git-svn-id: http://core.svn.wordpress.org/trunk@50056 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `external-http`, `media`, and `restapi` groups combined take roughly the same time as all the other tests combined. Splitting the test run in two speeds up the PHP 5.6 test runs which are the slowest by quite a margin. The net reduction in duration is only seen on PHP versions older than 7.0 where the reduction is greater than the time taken for the job to be set up.
Props peterwilsoncc, desrosj, johnbillion
Special shout out to manzoorwanijk whose article about running steps in parallel started me down this path.
Fixes#52645
Built from https://develop.svn.wordpress.org/trunk@50444
git-svn-id: http://core.svn.wordpress.org/trunk@50055 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Some PHPUnit tests were concerned with the state of files in the `build` directory. In order to allow the tests to run without requiring a build to be run first, these have been moved into assertions that run after the build step (and therefore cause it to fail if they do not pass), or into QUnit tests as necessary.
Various other PHPUnit tests implictly depend on built JavaScript files being present. These files are now touched during the test setup to avoid PHP warnings if the `build` files are not present.
The `wp-tests-config-sample.php` file and the GitHub Actions configuration have also been changed so `ABSPATH` uses `src` instead of `build`, therefore allowing the PHPUnit tests to be run without a build having to be run first. This means all new local installations of WordPress will use `src` for PHPUnit testing. If you would like to switch your existing installation over then change the location of `ABSPATH` in `wp-tests-config.php` to point to `src` instead of `build`.
Props peterwilsoncc, iandunn, gziolo, desroj, johnbillion
Fixes#51734
See #45863
Built from https://develop.svn.wordpress.org/trunk@50441
git-svn-id: http://core.svn.wordpress.org/trunk@50052 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `actions/cache` GitHub action uses a `key` input to find the desired cache in storage. Currently, this is defined as a combination of the operating system being used, the software being cached (NPM or Composer), PHP version (Composer only), and a hash of the relevant lock file.
The `cache` action also supports a `restore-keys` input, which is an ordered list of keys to use for restoring a cache if no cache hit occurred for the specified key.
However, this means that every time a lock file is updated, the cache is being recreated by first restoring a previous one (when available), and then installing new versions of dependencies on top of that. This results in old, unused versions of dependencies never being removed from the cache.
In this change, the `restore-keys` are removed. This will force a new, fresh cache to be generated when the desired `key` is not matched. In testing, this results in a ~40% reduction in cache size when compared to the latest successful workflow runs. Since there is no way to manually flush the cache in GHA, the benefits of this change will not be seen until the `package-lock.json` and `composer.lock` files are updated, or the cache at the desired key is evicted.
Props johbillion.
See #52660.
Built from https://develop.svn.wordpress.org/trunk@50436
git-svn-id: http://core.svn.wordpress.org/trunk@50047 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In GitHub Actions, there is a `fail-fast` option that will cancel all incomplete jobs within a workflow as soon as one failure is encountered. This defaults to `true`.
This is great for alerting you of a failure faster, but does not give you the full picture of what is failing. For example, it’s possible that there is a failing test on 2 versions of PHP, but not others. If `fail-fast` is enabled, it’s impossible to know this.
Even with `fail-fast` disabled, the workflow will still report a failure if one or more jobs produce a failing result.
Props johbillion, jorbin.
Fixes#52612.
Built from https://develop.svn.wordpress.org/trunk@50435
git-svn-id: http://core.svn.wordpress.org/trunk@50046 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Different branches have support for different types of testing based on the tooling that was in place at the time each version was branched. The workflows currently in place have patterns configured to match the relevant `branches` and `tags` for each workflow, but only for `push` events.
This copies the patterns for matching supported `branches` over to the `pull_request` event to prevent workflows from running for a pull request to a branch that does not support that workflow.
Fixes#52643.
Built from https://develop.svn.wordpress.org/trunk@50432
git-svn-id: http://core.svn.wordpress.org/trunk@50043 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This ensures a transparent logo remains visible while focused. Also cleans up dark mode CSS, consolidating styles and removing overrides that are no longer needed.
Follow up to [50154].
Props poena, sabernhardt, ryelle.
Fixes#52257.
Built from https://develop.svn.wordpress.org/trunk@50423
git-svn-id: http://core.svn.wordpress.org/trunk@50034 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This includes many minor adjustments to a wide array of core files to replace shorthands with full declarations.
Follow-up to [50001], [50270], [50367].
Props Clorith, hellofromTonya, peterwilsoncc, adamsilverstein, aristath.
See #51812.
Built from https://develop.svn.wordpress.org/trunk@50420
git-svn-id: http://core.svn.wordpress.org/trunk@50031 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Add a reference to `WP_Block_Type::__construct()` for information on accepted arguments in `register_block_type()`.
Synchronize the documentation between several places, use `WP_Block_Type::__construct()` as the canonical source.
Props ediamin, audrasjb, peterwilsoncc.
Fixes#48640.
Built from https://develop.svn.wordpress.org/trunk@50419
git-svn-id: http://core.svn.wordpress.org/trunk@50030 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Move `wp_get_script_tag()`, `wp_print_script_tag()`, `wp_print_inline_script_tag()` and `wp_get_inline_script_tag()` functions from `functions.php` to `script-loader.php`.
Relocate related tests to `dependencies` sub-directory.
Follow up to [50167].
Props adamsilverstein, hellofromTonya, SergeyBiryukov.
Fixes#39941.
Built from https://develop.svn.wordpress.org/trunk@50409
git-svn-id: http://core.svn.wordpress.org/trunk@50020 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Prevent `wp_localize_script()` (via `WP_Scripts::localize()`) throwing warnings in PHP 8 when the translation data is passed as a string. This maintains backward compatibility with earlier versions of PHP.
Introduce a `_doing_it_wrong()` notice to `WP_Scripts::localize()` if the translation data is not passed as an array.
Props jrf, peterwilsoncc, SergeyBiryukov.
Fixes#52534.
Built from https://develop.svn.wordpress.org/trunk@50408
git-svn-id: http://core.svn.wordpress.org/trunk@50019 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Replace loopback health check URL with a `POST` request to `wp-cron.php` in the WordPress install directory. This more closely represents how WordPress uses loopback requests.
A `POST` request is used to cause `wp-cron.php` to exit prior to running any cron jobs. This allows the test to indicate success quicker and accounts for sites that set the `DISABLE_WP_CRON` constant to avoid running cron jobs on loopback requests.
Props clorith, peterwilsoncc, TimothyBlynJacobs.
Fixes#52547.
Built from https://develop.svn.wordpress.org/trunk@50399
git-svn-id: http://core.svn.wordpress.org/trunk@50010 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This is a maintenance release. Changes include:
* Handle early connection errors such as 421 during connection and EHLO states.
* Make the `mail()` and sendmail transports set the envelope sender the same way as SMTP does, i.e. use whatever `From` is set to, only falling back to the `sendmail_from` php.ini setting if `From` is unset. This avoids errors from the `mail()` function if `Sender` is not set explicitly and php.ini is not configured. This is a minor functionality change, so bumps the minor version number.
* Extend `parseAddresses` to decode encoded names.
Release notes: https://github.com/PHPMailer/PHPMailer/releases/tag/v6.3.0
For a full list of changes in this update, see the PHPMailer GitHub:
https://github.com/PHPMailer/PHPMailer/compare/v6.2.0...v6.3.0
Props ayeshrajans.
Fixes#52577.
Built from https://develop.svn.wordpress.org/trunk@50397
git-svn-id: http://core.svn.wordpress.org/trunk@50008 1a063a9b-81f0-0310-95a4-ce76da25c4cd
This avoids an "Undefined index" PHP notice in `wp_resource_hints()` tests when running the full test suite.
Remove the unused global from `get_home_url()`.
Follow-up to [25443], [38100], [38174], [50156], [50164].
Props peterwilsoncc.
Fixes#52566.
Built from https://develop.svn.wordpress.org/trunk@50393
git-svn-id: http://core.svn.wordpress.org/trunk@50004 1a063a9b-81f0-0310-95a4-ce76da25c4cd
When deleting a term, it has to be removed individually from each object it's connected to, which can take some significant time when there are a lot of objects.
By calling `wp_remove_object_terms()` when no default term is required, we can skip the terms fetch/diff step and significantly speed up the deletion process.
Props dd32.
Fixes#52549.
Built from https://develop.svn.wordpress.org/trunk@50389
git-svn-id: http://core.svn.wordpress.org/trunk@50000 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The admin bar height custom property is used in `calc` functions, which require consistent unit use, even when the value is zero. A unitless value returns an invalid value for the "height" property, where this variable is used. This also changes the stylelint rule in the theme to allow zero values with a unit, just in custom properties.
Props nico23.
Fixes#52564.
Built from https://develop.svn.wordpress.org/trunk@50388
git-svn-id: http://core.svn.wordpress.org/trunk@49999 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In #50547, the admin color schemes were added to the customizer UI, but at some point specificity changed and the colors were overridden by the defaults. This brings the color schemes back into the customizer, using the button color as a highlight, with the link color for text to keep things readable.
Follow up to [48371].
Props audrasjb, peterwilsoncc.
Fixes#52230.
Built from https://develop.svn.wordpress.org/trunk@50386
git-svn-id: http://core.svn.wordpress.org/trunk@49997 1a063a9b-81f0-0310-95a4-ce76da25c4cd
The `blur()` method there is not the jQuery method, but is an HTML DOM method instead.
This makes the Close button on the "View details" modal on Plugins screen functional again.
Follow-up to [50367].
Props afragen.
See #51812.
Built from https://develop.svn.wordpress.org/trunk@50383
git-svn-id: http://core.svn.wordpress.org/trunk@49994 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Ensure that subsequent renders of a reusable block will render correctly and that recursively inserting a reusable block into itself does not cause an internal server (500) error.
Props bernhard-reiter, SergeyBiryukov.
Fixes#52364.
Built from https://develop.svn.wordpress.org/trunk@50382
git-svn-id: http://core.svn.wordpress.org/trunk@49993 1a063a9b-81f0-0310-95a4-ce76da25c4cd
In `unstick_post()` if a post ID is duplicated in the `sticky_posts` option remove all instances.
In both `stick_post()` and `unstick_post()` check for duplicate IDs already stored in the `sticky_post` option and remove them if the option is updated.
Props rahmohn, archon810.
Fixes#52007.
Built from https://develop.svn.wordpress.org/trunk@50380
git-svn-id: http://core.svn.wordpress.org/trunk@49991 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Updates older themes to fix alignment, spacing, and font issues to better match the frontend display. Applies to themes: Twenty Eleven, Twenty Thirteen, Twenty Fourteen, Twenty Sixteen, Twenty Seventeen, and Twenty Twenty.
Props burnuser, talldanwp, cristinasoponar, poena, kjellr
Fixes#52009.
Built from https://develop.svn.wordpress.org/trunk@50358
git-svn-id: http://core.svn.wordpress.org/trunk@49969 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Adds an explicit relationship between the upload button and the maximum upload limit, moves focus to the error dismiss button if an error occurs, and adds a call to wp.a11y.speak to report the error after it occurs.
Props afercia, anevins, antpb, adamsilverstein, poena
Fixes#47120
Built from https://develop.svn.wordpress.org/trunk@50352
git-svn-id: http://core.svn.wordpress.org/trunk@49963 1a063a9b-81f0-0310-95a4-ce76da25c4cd
Sergey Biryukov
John Blackbourn
Peter Wilson
desrosj
Adam Silverstein
ryelle
noisysocks
Felix Arntz
joedolson
youknowriad
Dominik Schilling
gziolo